summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2018-02-15Merge tag 'hwmon-for-linus-v4.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix bad temperature display on Ryzen/Threadripper" * tag 'hwmon-for-linus-v4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (k10temp) Only apply temperature offset if result is positive
2018-02-14Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar: "Here's the latest set of Spectre and PTI related fixes and updates: Spectre: - Add entry code register clearing to reduce the Spectre attack surface - Update the Spectre microcode blacklist - Inline the KVM Spectre helpers to get close to v4.14 performance again. - Fix indirect_branch_prediction_barrier() - Fix/improve Spectre related kernel messages - Fix array_index_nospec_mask() asm constraint - KVM: fix two MSR handling bugs PTI: - Fix a paranoid entry PTI CR3 handling bug - Fix comments objtool: - Fix paranoid_entry() frame pointer warning - Annotate WARN()-related UD2 as reachable - Various fixes - Add Add Peter Zijlstra as objtool co-maintainer Misc: - Various x86 entry code self-test fixes - Improve/simplify entry code stack frame generation and handling after recent heavy-handed PTI and Spectre changes. (There's two more WIP improvements expected here.) - Type fix for cache entries There's also some low risk non-fix changes I've included in this branch to reduce backporting conflicts: - rename a confusing x86_cpu field name - de-obfuscate the naming of single-TLB flushing primitives" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) x86/entry/64: Fix CR3 restore in paranoid_exit() x86/cpu: Change type of x86_cache_size variable to unsigned int x86/spectre: Fix an error message x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping selftests/x86/mpx: Fix incorrect bounds with old _sigfault x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]() x86/speculation: Add <asm/msr-index.h> dependency nospec: Move array_index_nospec() parameter checking into separate macro x86/speculation: Fix up array_index_nospec_mask() asm constraint x86/debug: Use UD2 for WARN() x86/debug, objtool: Annotate WARN()-related UD2 as reachable objtool: Fix segfault in ignore_unreachable_insn() selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory selftests/x86/pkeys: Remove unused functions selftests/x86: Clean up and document sscanf() usage selftests/x86: Fix vDSO selftest segfault for vsyscall=none x86/entry/64: Remove the unused 'icebp' macro ...
2018-02-15x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_steppingJia Zhang
x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-12hwmon: (k10temp) Only apply temperature offset if result is positiveGuenter Roeck
A user reports a really bad temperature on Ryzen 1950X. k10temp-pci-00cb Adapter: PCI adapter temp1: +4294948.3°C (high = +70.0°C) This will happen if the temperature reported by the chip is lower than the offset temperature. This has been seen in the field if "Sense MI Skew" and/or "Sense MI Offset" BIOS parameters were set to unexpected values. Let's report a temperature of 0 degrees C in that case. Fixes: 1b50b776355f ("hwmon: (k10temp) Add support for temperature offsets") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-27hwmon: (dell-smm) Disable fan support for Dell Vostro 3360Oleksandr Natalenko
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell Vostro 3360 freeze kernel for about 500ms. Unfortunately, it is unlikely for Dell to fix this since the machine is pretty old, so this commit just disables fan support to make the system usable again. Via "force" module param fan support can be enabled. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751 Link: http://lkml.iu.edu/hypermail/linux/kernel/1711.2/06083.html Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-27hwmon: (dell-smm) Disable fan support for Dell Inspiron 7720Pali Rohár
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell Inspiron 7720 freeze kernel for about 500ms. Until Dell fixes it we need to disable fan support for Dell Inspiron 7720 as it makes system unusable. Via "force" module param fan support can be enabled. Reported-by: vova7890@mail.ru Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751 Cc: stable@vger.kernel.org # v4.0+, will need backport Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-27hwmon: (dell-smm) Enable broken functionality via "force" module paramPali Rohár
Some Dell machines are broken and some functionality is disabled. Show warning into dmesg about this fact and allow user via "force" module param to override brokenness and enable broken functionality. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-19hwmon: (k10temp) Add temperature offset for Ryzen 1900XGuenter Roeck
Like the other CPUs from the same series, the 1900X has a temperature offset of 27 degrees C. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-17hwmon: (lm75) Fix trailing semicolonLuis de Bethencourt
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-15hwmon: (ina2xx) Fix access to uninitialized mutexMarek Szyprowski
Initialize data->config_lock mutex before it is used by the driver code. This fixes following warning on Odroid XU3 boards: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14) [<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8) [<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c) [<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850) [<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8) [<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c) [<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24) [<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0) [<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0) [<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0) [<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0) [<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120) [<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c) [<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250) [<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4) [<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8) [<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c) [<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4) [<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114) [<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) Fixes: 5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-15hwmon: (pmbus/ir35221) Remove unnecessary scalingSamuel Mendoza-Jonas
The ir35221 datasheet describes specific scaling factors for a number of commands which the current driver applies when reading. However now that the ir35221 has been tested on machines with more easily verifiable readings these descriptions have turned out to be superfluous and reading each command according to the linear format is sufficient. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-12hwmon: (sht3x) wait predefined limits loading complete before accessEmiliano Ingrassia
An sht3x sensor include limits register which contains temperature and humidity limit values. After a reset, pre-defined values are loaded into that register. During the probe function, the driver reads the limits register. However, if the reads are made too early, and the bus is clocked at high frequencies (e.g. 100 kHz or more), the loading could be not completed and the sensor returns a NACK which causes the probe to fail. A delay of at least 500 us before the first read solves this issue. Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-12hwmon: (pmbus/ibm-cffps) Add dependency on LEDS_CLASSArnd Bergmann
Building without CONFIG_LEDS_CLASS causes a link failure: drivers/hwmon/pmbus/ibm-cffps.o: In function `ibm_cffps_probe': ibm-cffps.c:(.text+0x4f4): undefined reference to `devm_of_led_classdev_register' This adds the required dependency. Fixes: ef9e1cdf419a ("hwmon: (pmbus/cffps) Add led class device ...") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-11hwmon: (pmbus/cffps) Add led class device for power supply fault ledeajames@linux.vnet.ibm.com
This power supply device doesn't correctly manage it's own fault led. Add an led class device and register it so that userspace can manage power supply fault led as necessary. Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-08hwmon: (pmbus) cffps: Add PMBUS_SKIP_STATUS_CHECKEddie James
This power supply device regularly fails to read VOUT_MODE due to the CML bit going high. This results in an incorrect exponent used for the voltage data, and therefore the power supply reports incorrect voltage. Work around this by setting the pmbus flag to skip the CML check. Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Fixes: f69316d62c70 ("hwmon: (pmbus) Add IBM Common Form Factor (CFF) ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (aspeed-pwm-tacho) Deassert reset in probeJoel
The ASPEED SoC must deassert a reset in order to use the PWM/tach peripheral. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (pmbus) cffps: Add debugfs entriesEdward A. James
Add debugfs entries for additional power supply data, including part number, serial number, FRU number, firmware revision, ccin, and the input history of the power supply. The input history is 10 minutes of input power data in the form of twenty 30-second packets. Each packet contains average and maximum power for that 30 second period. Signed-off-by: Edward A. James <eajames@us.ibm.com> [groeck: Fixed endianness problem] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (pmbus) Export pmbus device debugfs directory entryEdward A. James
Pmbus client drivers, if they want to use debugfs, should use the same root directory as the pmbus debugfs entries are using. Therefore, export the device dentry for the pmbus client. Signed-off-by: Edward A. James <eajames@us.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (w83773g) Fix fault detection and reportingGuenter Roeck
Smatch reports: drivers/hwmon/w83773g.c:105 get_fault() warn: shift has higher precedence than mask Code analysis shows that the code is indeed wrong. Fix it, and while we are at it, drop unnecessary typecast. Fixes: 86a10c802362 ("hwmon: Add W83773G driver") Cc: Lei YU <mine260309@gmail.com> Reviewed-by: Lei YU <mine260309@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (hih6130) Fix documentation of struct hih6130Guenter Roeck
Sparse reports: drivers/hwmon/hih6130.c:56: warning: No description found for parameter 'client' drivers/hwmon/hih6130.c:56: warning: Excess struct member 'hwmon_dev' description in 'hih6130' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (iio_hwmon) Fix documentation of struct iio_hwmon_stateGuenter Roeck
Sparse reports: drivers/hwmon/iio_hwmon.c:36: warning: No description found for parameter 'groups' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (sht15) Fix parameter documentation of sht15_crc8()Guenter Roeck
Sparse reports: drivers/hwmon/sht15.c:188: warning: No description found for parameter 'len' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (sht21) Fix documentation of struct sht21Guenter Roeck
Sparse reports: drivers/hwmon/sht21.c:60: warning: No description found for parameter 'client' drivers/hwmon/sht21.c:60: warning: Excess struct member 'hwmon_dev' description in 'sht21' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: Fix parameter documentationGuenter Roeck
sparse reports: drivers/hwmon/hwmon.c:681: warning: No description found for parameter 'chip' drivers/hwmon/hwmon.c:681: warning: Excess function parameter 'info' description in 'hwmon_device_register_with_info' drivers/hwmon/hwmon.c:789: warning: No description found for parameter 'chip' drivers/hwmon/hwmon.c:789: warning: No description found for parameter 'groups' drivers/hwmon/hwmon.c:789: warning: Excess function parameter 'info' description in 'devm_hwmon_device_register_with_info' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (max31785) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Before this patch: $ modinfo drivers/hwmon/pmbus/max31785.ko | grep alias alias: i2c:max31785a alias: i2c:max31785 After this patch: $ modinfo drivers/hwmon/pmbus/max31785.ko | grep alias alias: i2c:max31785a alias: i2c:max31785 alias: of:N*T*Cmaxim,max31785aC* alias: of:N*T*Cmaxim,max31785a alias: of:N*T*Cmaxim,max31785C* alias: of:N*T*Cmaxim,max31785 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (ina2xx) Make calibration register value fixedMaciej Purski
Calibration register is used for calculating current register in hardware according to datasheet: current = shunt_volt * calib_register / 2048 (ina 226) current = shunt_volt * calib_register / 4096 (ina 219) Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in order to avoid truncation error and provide best precision allowed by shunt_voltage measurement. Make current scale value follow changes of shunt_resistor from sysfs as calib_register value is now fixed. Power_lsb value should also follow shunt_resistor changes as stated in datasheet: power_lsb = 25 * current_lsb (ina 226) power_lsb = 20 * current_lsb (ina 219) Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (pmbus/max31785) Add dual tachometer supportAndrew Jeffery
The dual tachometer feature is implemented in hardware with a TACHSEL input to indicate the rotor under measurement, and exposed on the device by extending the READ_FAN_SPEED_1 word with two extra bytes*. The need to read the non-standard four-byte response leads to a cut-down implementation of i2c_smbus_xfer_emulated() included in the driver. Further, to expose the second rotor tachometer value to userspace the values are exposed through virtual pages. We re-route accesses to FAN_CONFIG_1_2 and READ_FAN_SPEED_1 on pages 23-28 (not defined by the hardware) to the same registers on pages 0-5, and with the latter command we extract the value from the second word of the four-byte response. * The documentation recommends the slower rotor be associated with TACHSEL=0, which corresponds to the first word of the response. The TACHSEL=0 measurement is used by the controller's closed-loop fan management to judge target fan rate. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (pmbus) Add virtual page config bitAndrew Jeffery
Some circumstances call for virtual pages, to expose multiple values packed into an extended PMBus register in a manner non-compliant with the PMBus standard. An example of this is the Maxim MAX31785 controller, which extends the READ_FAN_SPEED_1 PMBus register from two to four bytes to support tach readings for both rotors of a dual rotor fan. This extended register contains two word-sized values, one reporting the rate of the fastest rotor, the other the rate of the slowest. The concept of virtual pages aids this situation by mapping the page number onto the value to be selected from the vectored result. We should not try to set virtual pages on the device as such a page explicitly doesn't exist; add a flag so we can avoid doing so. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (pmbus/max31785) Add fan controlAndrew Jeffery
The implementation makes use of the new fan control virtual registers exposed by the pmbus core. It mixes use of the default implementations with some overrides via the read/write handlers to handle FAN_COMMAND_1 on the MAX31785, whose definition breaks the value range into various control bands dependent on RPM or PWM mode. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (pmbus) Add fan control supportAndrew Jeffery
Expose fanX_target, pwmX and pwmX_enable hwmon sysfs attributes. Fans in a PMBus device are driven by the configuration of two registers, FAN_CONFIG_x_y and FAN_COMMAND_x: FAN_CONFIG_x_y dictates how the fan and the tacho operate (if installed), while FAN_COMMAND_x sets the desired fan rate. The unit of FAN_COMMAND_x is dependent on the operational fan mode, RPM or PWM percent duty, as determined by the corresponding configuration in FAN_CONFIG_x_y. The mapping of fanX_target, pwmX and pwmX_enable onto FAN_CONFIG_x_y and FAN_COMMAND_x is implemented with the addition of virtual registers to facilitate the necessary side-effects of each access: 1. PMBUS_VIRT_FAN_TARGET_x 2. PMBUS_VIRT_PWM_x 3. PMBUS_VIRT_PWM_ENABLE_x Some complexity arises with the fanX_target and pwmX attributes both mapping onto FAN_COMMAND_x: There is no general mapping between PWM percent duty and RPM, so we can't display values in either attribute in terms of the other (which in my mind is the intuitive, if impossible, behaviour). This problem also affects the pwmX_enable attribute which allows userspace to switch between full speed, manual PWM and a number of automatic control modes, possibly including a switch to RPM behaviour (e.g. automatically adjusting PWM duty to reach a RPM target, the behaviour of fanX_target). The next most intuitive behaviour is for fanX_target and pwmX to simply be independent, to retain their most recently set value even if that value is not active on the hardware (due to switching to the alternative control mode). This property of retaining the value independent of the hardware state has useful results for both userspace and the kernel: Userspace always sees a sensible value in the attribute (the last thing it was set to, as opposed to 0 or receiving an error on read), and the kernel can use the attributes as a value cache. This latter point eases the implementation of pwmX_enable, which can look up the associated pmbus_sensor object, take its cached value and apply it to hardware on changing control mode. This ensures we will not arbitrarily set a PWM value as an RPM value or vice versa, and we can assume that the RPM or PWM value set was sensible at least at some point in the past. Finally, the DIRECT mode coefficients of some controllers is different between RPM and PWM percent duty control modes, so PSC_PWM is introduced to capture the necessary coefficients. As pmbus core had no PWM support previously PSC_FAN continues to be used to capture the RPM DIRECT coefficients, but in order to avoid falsely applying RPM scaling to PWM values I have introduced the PMBUS_HAVE_PWM12 and PMB_BUS_HAVE_PWM34 feature bits. These feature bits allow drivers to explicitly declare PWM support in order to have the attributes exposed. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (pmbus/lm25066) Drop support for LM25063Guenter Roeck
LM25063 was never released. Drop support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: (coretemp) deprecate pci_get_bus_and_slot()Sinan Kaya
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Use pci_get_domain_bus_and_slot() with a domain number of 0 where we can't extract the domain number. Other places, use the actual domain number from the device. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: Drop unnecessary 'default n' from KconfigGuenter Roeck
'default n' is default, so there is no need to specify it explicitly. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02hwmon: Add W83773G driverLei YU
Nuvoton W83773G is a hardware monitor IC providing one local temperature and two remote temperature sensors. Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-12-26hwmon: Deal with errors from the thermal subsystemLinus Walleij
If the thermal subsystem returne -EPROBE_DEFER or any other error when hwmon calls devm_thermal_zone_of_sensor_register(), this is silently ignored. I ran into this with an incorrectly defined thermal zone, making it non-existing and thus this call failed with -EPROBE_DEFER assuming it would appear later. The sensor was still added which is incorrect: sensors must strictly be added after the thermal zones, so deferred probe must be respected. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-30hwmon: (jc42) optionally try to disable the SMBUS timeoutPeter Rosin
With a nxp,se97 chip on an atmel sama5d31 board, the I2C adapter driver is not always capable of avoiding the 25-35 ms timeout as specified by the SMBUS protocol. This may cause silent corruption of the last bit of any transfer, e.g. a one is read instead of a zero if the sensor chip times out. This also affects the eeprom half of the nxp-se97 chip, where this silent corruption was originally noticed. Other I2C adapters probably suffer similar issues, e.g. bit-banging comes to mind as risky... The SMBUS register in the nxp chip is not a standard Jedec register, but it is not special to the nxp chips either, at least the atmel chips have the same mechanism. Therefore, do not special case this on the manufacturer, it is opt-in via the device property anyway. Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-27hwmon: (pmbus) Use 64bit math for DIRECT format valuesRobert Lippert
Power values in the 100s of watt range can easily blow past 32bit math limits when processing everything in microwatts. Use 64bit math instead to avoid these issues on common 32bit ARM BMC platforms. Fixes: 442aba78728e ("hwmon: PMBus device driver") Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-16hwmon: (w83793) Remove duplicate NULL checkAndy Shevchenko
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-16hwmon: (w83792d) Remove duplicate NULL checkAndy Shevchenko
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-16hwmon: (w83791d) Remove duplicate NULL checkAndy Shevchenko
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-16hwmon: (w83781d) Remove duplicate NULL checkAndy Shevchenko
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-16hwmon: (k10temp) Correct model name for Ryzen 1600XGuenter Roeck
Ryzen 1600X is a Ryzen 5 processor. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-13Merge tag 'hwmon-for-linus-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - drivers for MAX31785 and MAX6621 - support for AMD family 17h (Ryzen, Threadripper) temperature sensors - various driver cleanups and minor improvements * tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits) dt-bindings: pmbus: Add Maxim MAX31785 documentation pmbus: Add driver for Maxim MAX31785 Intelligent Fan Controller hwmon: (aspeed-pwm-tacho) Sort headers hwmon: (xgene) Minor clean up of ifdef and acpi_match_table reference hwmon: (max6621) Inverted if condition in max6621_read() hwmon: (asc7621) remove redundant assignment to newval hwmon: (xgene) Support hwmon v2 hwmon: (gpio-fan) Fix null pointer dereference at probe hwmon: (gpio-fan) Convert to use GPIO descriptors hwmon: (gpio-fan) Rename GPIO line state variables hwmon: (gpio-fan) Get rid of the gpio alarm struct hwmon: (gpio-fan) Get rid of platform data struct hwmon: (gpio-fan) Mandate OF_GPIO and cut pdata path hwmon: (gpio-fan) Send around device pointer hwmon: (gpio-fan) Localize platform data hwmon: (gpio-fan) Use local variable pointers hwmon: (gpio-fan) Move DT bindings to the right place Documentation: devicetree: add max6621 device hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor hwmon: (w83793) make const array watchdog_minors static, reduces object code size ...
2017-11-05pmbus: Add driver for Maxim MAX31785 Intelligent Fan ControllerAndrew Jeffery
The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan management with temperature and remote voltage sensing. It supports various fan control features, including PWM frequency control, temperature hysteresis, dual tachometer measurements, and fan health monitoring. This patch presents a basic driver using only the existing features of the PMBus subsystem. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> [groeck: Modified description to clarify that fan control is not yet provided] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-04hwmon: (aspeed-pwm-tacho) Sort headersJoel
Sort the headers in preperation for future changes. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01hwmon: (xgene) Minor clean up of ifdef and acpi_match_table referencehotran
This patch removes the un-necessary ifdef CONFIG_ACPI and directly uses the acpi_match_table from the driver pdev. Signed-off-by: Hoan Tran <hotran@apm.com> [groeck: Dropped unnecessary initialization] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-10-29hwmon: (max6621) Inverted if condition in max6621_read()Dan Carpenter
We intended to test for failure here but accidentally tested for success. It means that we don't set "*val" to true and it means that if i2c_smbus_write_byte() does fail then we return success. Fixes: e7895864b0d7 ("hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-10-29hwmon: (asc7621) remove redundant assignment to newvalColin Ian King
The setting of newval to zero is redundant as the following if/else stanzas will always update newval to a new value. Remove the redundant setting, cleans up clang build warning: drivers/hwmon/asc7621.c:582:2: warning: Value stored to 'newval' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 19:42:38 +0000