summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2009-04-01lis3: SPI transport layerDaniel Mack
Make use of the new abstraction layer and add a new transport layer for spi. Works fine on a PXA based board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01lis3: solve dependency between core and ACPIDaniel Mack
This solves the dependency between lis3lv02d.[ch] and ACPI specific methods. It introduces a ->bus_priv pointer to the device struct which is casted to 'struct acpi_device' in the ACIP layer. Changed hp_accel.c accordingly. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01lis3: reorder functions to make forward decl obsoleteDaniel Mack
Move lis3lv02d_init_device() down so that the forward declaration of lis3lv02d_add_fs() becomes unnecessary. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hp_accel: axis conversion for hp compaq 8710wLuca Cappa
I have a laptop HP Compaq 8710W, I compiled into my kernel the LIS3LV02DL and HP_ACCEL module drivers. While loading it cannot recognize the laptop model, so i am sending the necessary information to update the database of axis orientations. >When the laptop is horizontal the position reported is about 0 for X and Y >and a positive value for Z Yes, it is about 0,0,1000, the actual reading says: (-17,-26,1018); > If the left side is elevated, X increases (becomes positive) Yes, X goes toward to positive 1000. >If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) No, Y goes toward to positive 1000. >If the laptop is put upside-down, Z becomes negative Yes, the laptop on a table Z gives 1000, and if upsidedown the Z reads -1000. So in few words the Y axis is inverted. Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hp_accel: add two more axis informationPavel Machek
Add two more laptops to whitelist. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Daniel Mack <daniel@caiaq.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hwmon: Add LTC4215 driverIra Snyder
Add Linux support for the Linear Technology LTC4215 Hot Swap controller I2C monitoring interface. I have tested the driver with my board, and it appears to work fine. With the power supplies disabled, it reads 11.93V input, 1.93V output, no current and no power. With the supplies enabled, it reads 11.93V input, 11.98V output, no current, no power. I'm not drawing any current at the moment, so this is reasonable. The value in the sense register never reads anything except 0, so I expect to get zero from the current and power calculations. I didn't attempt to support changing any of the chip's settings or enabling the FET. I'm not sure even how to do that and still fit within the hwmon framework. :) Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hwmon: LM95241 driverDavide Rizzo
An hwmon driver for the National Semiconductor LM95241 triple temperature sensors chip Signed-off-by: Davide Rizzo <elpa-rizzo@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hp_accel: adev is poor name of exported symbolPavel Machek
As Andrew noted, adev is pretty poor name for symbol being exported. Rename it to lis3. Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Cc: <Quoc.Pham@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-30hwmon: (fschmd) Add support for the FSC Hades ICHans de Goede
Add support for the Hades to the FSC hwmon driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30hwmon: (fschmd) Add support for the FSC Syleus ICHans de Goede
Many thanks to Fujitsu Siemens Computers for providing docs and a machine to test the driver on. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30dmi: Let dmi_walk() users pass private dataJean Delvare
At the moment, dmi_walk() lacks flexibility, users can't pass data to the callback function. Add a pointer for private data to make this function more flexible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Roland Dreier <rolandd@cisco.com>
2009-03-30Move the pcf8591 driver to hwmonJean Delvare
Directory drivers/i2c/chips is going away, so drivers there must find new homes. For the pcf8591 driver, the best choice seems to be the hwmon subsystem. While the Philips PCF8591 device isn't a typical hardware monitoring chip, its DAC interface is compatible with the hwmon one, so it fits somewhat. If a better subsystem is ever created for ADC/DAC chips, the driver could be moved there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HGGong Jun
The pin for in6 and temp3 is shared on the W83667HG, so only one of these features can be supported on any given system. Let the driver select which one depending on the temp3 disabled bit. Signed-off-by: Gong Jun <JGong@nuvoton.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30hwmon: (w83627ehf) Add support for W83667HGGong Jun
Add initial support for the Nuvoton W83667HG chip to the w83627ehf driver. It has been tested on ASUS P5QL PRO by Gong Jun. At the moment there is still a usability issue which is that only in6 or temp3 can be present on the W83667HG, so the driver shouldn't expose both. This will be addressed later. Signed-off-by: Gong Jun <JGong@nuvoton.com> Acked-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30hwmon: (w83627ehf) Invert fan pin variables logicJean Delvare
Use positive logic for fan pin variables (variable is set if pin is used for fan), instead of negative logic which is error prone. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Gong Jun <JGong@nuvoton.com>
2009-03-30hwmon: (hdaps) Fix Thinkpad X41 axis inversionFrank Seidel
Fix for kernel.org bug #7154: hdaps inversion of actual Thinkpad X41's Y-axis. Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30hwmon: (hdaps) Allow inversion of separate axisFrank Seidel
Fix for kernel.org bug #7154: hdaps inversion of each axis. This version is based on the work from Michael Ruoss <miruoss@student.ethz.ch>. Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30hwmon: (ds1621) Avoid unneeded register accessJean Delvare
Register access over SMBus isn't cheap, so avoid register access where possible: * Only write back the configuration register if it changed. * Don't refresh the register cache when we don't have to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30hwmon: (ds1621) Clean up register accessJean Delvare
Fix a few oddities in how the ds1621 driver accesses the registers: * We don't need a wrapper to access the configuration register. * Check for error before calling swab16. Error checking isn't complete yet, but that's a start. * Device-specific read functions should never be called during detection, as by definition we don't know what device we are talking to at that point. * Likewise, don't assume that register reads succeed during detection. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30hwmon: (ds1621) Reorder code statementsJean Delvare
Reorder the ds1621 driver code so that we can get rid of forward function declarations. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-12hwmon: (f75375s) Remove unnecessary and confusing initializationAndrew Klossner
f75375_probe calls i2c_get_clientdata to initialize the data pointer, but there isn't yet any client data to get, and the value is never used before the variable is assigned a new value seven lines later. The call doesn't hurt anything and wastes only a couple of cycles. The reason to fix it is because this module serves as an example to hackers writing new hwmon drivers, and this part of the example is confusing. Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12hwmon: (it87) Properly decode -128 degrees C temperatureJean Delvare
The it87 driver is reporting -128 degrees C as +128 degrees C. That's not a terribly likely temperature value but let's still get it right, especially when it simplifies the code. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12hwmon: (lm90) Document support for the MAX6648/6692 chipsDarrick J. Wong
Update documentation to prevent further confusion/duplication. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12hwmon: (abituguru3) Fix I/O error handlingJean Delvare
Fix a logic bug reported by Roel Kluin, by rewriting the error handling code in a clearer way. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Roel Kluin <roel.kluin@gmail.com> Acked-by: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
2009-03-10lm85: add VRM10 support for adt7468 chipDarrick J. Wong
The adt7468 chip supports VRM10 sensors just like the adt7463; add a missing check for it. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10lm85: fix the version check that broke adt7468 probingDarrick J. Wong
The verstep check in the lm85 driver fails because the upper nibble of the version register is 0x7, not 0x6, on the adt7468 chip. Probing of all adt7468s was broken by 69fc1feba2d5856ff74dedb6ae9d8c490210825c ("hwmon: (lm85) Rework the device detection"), and this patch fixes that. Also add in a missing i2c_device_id that accidentally got dropped from the original patch. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18lis3lv02d: add axes knowledge of HP Pavilion dv5 modelsGiuseppe Bilotta
Add support for HP Pavilion dv5. Since Intel-based models have an inverted x axis, while AMD-based models have an inverted y axis, we introduce a new macro that special-cases axis orientation based on two DMI entries: HP dv5 axis configuration is then based on both the PRODUCT and BOARD name. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Cc: Eric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@suse.cz> Tested-by: Palatis Tseng <palatis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18lis3lv02d: support both one- and two-byte sensorsGiuseppe Bilotta
Sensors responding with 0x3B to WHO_AM_I only have one data register per direction, thus returning a signed byte from the position which is occupied by the MSB in sensors responding with 0x3A. Since multiple sensors share the reply to WHO_AM_I, we rename the defines to better indicate what they identify (family of single and double precision sensors). We support both kind of sensors by checking for the sensor type on init and defining appropriate data-access routines and sensor limits (for the joystick) depending on what we find. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Eric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18hp accelerometer: add freefall detectionPavel Machek
This adds freefall handling to hp_accel driver. According to HP, it should just work, without us having to set the chip up by hand. hpfall.c is example .c program that parks the disk when accelerometer detects free fall. It should work; for now, it uses fixed 20seconds protection period. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Thomas Renninger <trenn@suse.de> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17hwmon: Fix ACPI resource check error handlingHans de Goede
This patch fixes a number of cases where things were not properly cleaned up when acpi_check_resource_conflict() returned an error, causing oopses such as the one reported here: https://bugzilla.redhat.com/show_bug.cgi?id=483208 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-02-17hwmon: (f71882fg) Hide misleading error messageJean Delvare
If the F71882FG chip is at address 0x4e, then the probe at 0x2e will fail with the following message in the logs: f71882fg: Not a Fintek device This is misleading because there is a Fintek device, just at a different address. So I propose to degrade this message to a debug message. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
2009-02-05lis3lv02d: add axes knowledge for HP 6710Martin Kebert
Add support for the HP laptops of model 6710x for having correctly setup axes. Signed-off-by: Martin Kebert <gkmarty@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05lis3lv02d: add axes knowledge for HP 6730Pavel Herrmann
Add support for the HP laptops of model 6730x for having correctly setup axes. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05lis3lv02d: add axes knowledge for HP 6530Eric Piel
Add support for the HP laptops of model 6530x for having correctly setup axes. Reported-by: Jerome Poulin <jeromepoulin@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05lis3lv02d: add axes knowledge for HP 6510bJiri Tersel
According to dmesg my laptop model HP 6510b is not being recognized by this driver. After I have modified "lis3lv02d.c" axes in Neverball are OK. Signed-off-by: Jiri Tersel <tersel@mail.muni.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29hwmon: applesmc: add support for MacPro 3 temperature sensorsBharath Ramesh
MacPro 3 have more temperature sensors than the previous MacPro's also the sensor THTG has been removed. This patch add supports for the newer temperature sensors in the MacPro3. Signed-off-by: Bharath Ramesh <bramesh@vt.edu> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX hwmon: (abituguru3) Match partial DMI board name strings hwmon: Add a driver for the ADT7475 hardware monitoring chip hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs hwmon: (k8temp) Warn about fam F rev F errata
2009-01-15hp_accel: do not call ACPI from invalid contextPavel Machek
The LED on HP notebooks is connected through ACPI. That unfortunately means that it needs to be delayed by using schedule_work() to avoid calling the ACPI interpreter from an invalid context. [akpm@linux-foundation.org: use flush_work() rather than sort-of reimplementing it] Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15lis3lv02d: merge with leds hp diskEric Piel
Move the second part of the HP laptop disk protection functionality (a red led) to the same driver. From a purely Linux developer's point of view, the led and the accelerometer have nothing related. However, they correspond to the same ACPI functionality, and so will always be used together, moreover as they share the same ACPI PNP alias, there is no other simple to allow to have same loaded at the same time if they are not in the same module. Also make it requires the led class to compile and update the Kconfig text. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15hwmon: applesmc: fix light sensor readings on newer MacBooksAlex Murray
The light sensors ALV0 and ALV1 on newer MacBooks (early 2008 and later) changed to report 10 bytes instead the earlier 6, and the sensor encoding subsequently changed. As a result, the reported light sensors readings are much too low. Via experiments leading up to this patch, it seems only the ALV0 is reporting data, and the most useful value therein is a 10-bit big-endian value at offset 6. This suggests that a new protocol was added as a backward-compatible replacement on top of the old one. This patch makes applesmc report the improved light sensor reading for the new machines, on a scale in conformance with earlier ones. Signed-off-by: Alex Murray <murray.alex@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probeAlistair John Strachan
When CONFIG_DMI is not enabled, dmi detection should flag that no board could be detected (err=1) rather than another error condition (err<0). This fixes the fallback to manual probing for all motherboards, even those without DMI strings, when CONFIG_DMI=n. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAXAlistair John Strachan
Switch the IN9 32X MAX over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Paul Hartman <paul.hartman+gentoo@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (abituguru3) Match partial DMI board name stringsAlistair John Strachan
The switch-over to using DMI board strings to identify abituguru3 compatible mainboards works most of the time, but sometimes the vendor has substantially modified the board string between BIOS revisions. We have found that the vendor chipset identification string (provided in brackets) changes frequently and is of no use to us. The rest of the board string sometimes changes in subtle ways, e.g. whitespace or variations in capitalization. The new comparison code checks only a part of the supplied DMI board string, trimming the bracketed content, whitespace, and ignoring case as necessary. This fixes a bug where an IP35 Pro running an early BIOS would not be detected without the force=1 module parameter, and also speculatively fixes other similiar issues. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Reported-by: Nick Pasich <NewsLetters@nickandbarb.net> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: Add a driver for the ADT7475 hardware monitoring chipJordan Crouse
Hwmon driver for the ADT7475 chip. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUsAndreas Herrmann
Current Temperature for K8 RevG desktop CPUs is a "normalized value" which can be below ambient temperature. As a consequence lots of RevG systems report temperatures like: $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +17 C Core0 Temp: +3 C Core1 Temp: +21 C Core1 Temp: +5 C being quite below ambient temperature. There are even reports of negative temperature values. This patch corrects the temperature reporting of k8temp for RevG desktop CPUs. Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUsAndreas Herrmann
Meaning of ThermSenseCoreSel bit was inverted beginning with K8 RevF. That means with current driver temp1/temp2 belong to core 1 and temp3/temp4 belong to core 0 on a K8 RevF/RevG CPU. This patch ensures that temp1/temp2 always belong to core 0 and temp3/temp4 to core 1 for all K8 revisions. Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (k8temp) Warn about fam F rev F errataAndreas Herrmann
Add warning about wrong CPU temperature readouts on all fam F rev F. The allowed combinations of processors ensure that all processors in a multisocket system have similar characteristics, e.g. (1) provide temperature sensor interface (>=RevC && <RevF) (2) are affected by erratum #141 (>=RevF) Thus it is sufficient to check the revision of the boot CPU. For "mixed silicon support" refer to "Revision Guide for AMD Athlon 64 and AMD Opteron Processors" (RevA-E) and "Revision Guide for AMD NPT Family 0Fh Processors" (RefF-G). Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-09LIS3LV02D: separate the core from HP ACPI APIEric Piel
The sensor can be accessed via various buses. In particular, SPI, I²C and, on HP laptops, via a specific ACPI API (the only one currently supported). Separate this latest platform from the core of the sensor driver to allow support for the other bus type. The second, and more direct goal is actually to be able to merge this part with the hp-disk-leds driver, which has the same ACPI PNP number. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (29 commits) hwmon: Fix various typos hwmon: Check for ACPI resource conflicts hwmon: (lm70) Add TI TMP121 support hwmon: (lm70) Code streamlining and cleanup hwmon: Deprecate the fscher and fscpos drivers hwmon: (fschmd) Add watchdog support hwmon: (fschmd) Cleanups for watchdog support hwmon: (i5k_amb) Load automatically on all 5000/5400 chipsets hwmon: (it87) Add support for the ITE IT8720F hwmon: Don't overuse I2C_CLIENT_MODULE_PARM hwmon: Add LTC4245 driver hwmon: (f71882fg) Fix fan_to/from_reg prototypes hwmon: (f71882fg) Printout fan modes hwmon: (f71882fg) Add documentation hwmon: (f71882fg) Fix auto_channels_temp temp numbering with f8000 hwmon: (f71882fg) Add missing pwm3 attr for f71862fg hwmon: (f71882fg) Add F8000 support hwmon: (f71882fg) Remove the fan_mode module option hwmon: (f71882fg) Separate max and crit alarm and beep hwmon: (f71882fg) Check for hwmon powerdown state ...
2009-01-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) trivial: chack -> check typo fix in main Makefile trivial: Add a space (and a comma) to a printk in 8250 driver trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx trivial: Fix misspelling of "firmware" in powerpc Makefile trivial: Fix misspelling of "firmware" in usb.c trivial: Fix misspelling of "firmware" in qla1280.c trivial: Fix misspelling of "firmware" in a100u2w.c trivial: Fix misspelling of "firmware" in megaraid.c trivial: Fix misspelling of "firmware" in ql4_mbx.c trivial: Fix misspelling of "firmware" in acpi_memhotplug.c trivial: Fix misspelling of "firmware" in ipw2100.c trivial: Fix misspelling of "firmware" in atmel.c trivial: Fix misspelled firmware in Kconfig trivial: fix an -> a typos in documentation and comments trivial: fix then -> than typos in comments and documentation trivial: update Jesper Juhl CREDITS entry with new email trivial: fix singal -> signal typo trivial: Fix incorrect use of "loose" in event.c trivial: printk: fix indentation of new_text_line declaration trivial: rtc-stk17ta8: fix sparse warning ...