summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/si.c
AgeCommit message (Collapse)Author
2014-03-06drm/radeon: resume old pm lateAlex Deucher
Moving the pm resume up in the init order to fix dpm seems to have regressed somes cases with the old pm code. Move it back to late resume. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-06drm/radeon: fix UVD IRQ support on SIChristian König
Otherwise decoding isn't really useable. bug: https://bugs.freedesktop.org/show_bug.cgi?id=71448 Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-29drm/radeon: fix DAC interrupt handling on DCE5+Alex Deucher
DCE5 and newer hardware only has 1 DAC. Use the correct offset. This may fix display problems on certain board configurations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-29drm/radeon: clean up active vram sizingAlex Deucher
If we are not able to properly initialize one of the gpu engines for buffer paging, we limit vram to the size of the cpu visible aperture. We generally either use the gfx or dma engine to do this. Clean up the size limiting code to only adjust the size based on what ring is selected for buffer paging rather than making assumptions about which engine is selected for paging. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2014-01-20drm/radeon: write gfx pg bases even when gfx pg is disabledAlex Deucher
For consistency. These buffers aren't used when pg is disabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-20Merge branch 'drm-intel-next' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next drm-intel-next-2014-01-10: - final bits for runtime D3 on Haswell from Paul (now enabled fully) - parse the backlight modulation freq information in the VBT from Jani (but not yet used) - more watermark improvements from Ville for ilk-ivb and bdw - bugfixes for fastboot from Jesse - watermark fix for i830M (but not yet everything) - vlv vga hotplug w/a (Imre) - piles of other small improvements, cleanups and fixes all over Note that the pull request includes a backmerge of the last drm-fixes pulled into Linus' tree - things where getting a bit too messy. So the shortlog also contains a bunch of patches from Linus tree. Please yell if you want me to frob it for you a bit. * 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits) drm/i915/bdw: make sure south port interrupts are enabled properly v2 drm/i915: Include more information in disabled hotplug interrupt warning drm/i915: Only complain about a rogue hotplug IRQ after disabling drm/i915: Only WARN about a stuck hotplug irq ONCE drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
2014-01-08drm/radeon: implement pci config reset for SI (v2)Alex Deucher
pci config reset is a low level reset that resets the entire chip from the bus interface. It can be more reliable if soft reset fails. v2: hide behind module parameter Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: remove generic rptr/wptr functions (v2)Alex Deucher
Fill in asic family specific versions rather than using the generic version. This lets us handle asic specific differences more easily. In this case, we disable sw swapping of the rtpr writeback value on r6xx+ since the hw does it for us. Fixes bogus rptr readback on BE systems. v2: remove missed cpu_to_le32(), add comments Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/pm: move pm handling into the asic specific codeAlex Deucher
We need more control over the ordering of dpm init with respect to the rest of the asic. Specifically, the SMC has to be initialized before the rlc and cg/pg. The pm code currently initializes late in the driver, but we need it to happen much earlier so move pm handling into the asic specific callbacks. This makes dpm more reliable and makes clockgating work properly on CIK parts and should help on SI parts as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: re-order firmware loading in preparation for dpm reworkAlex Deucher
We need to reorder the driver init sequence to better accomodate dpm which needs to be loaded earlier in the init sequence. Move fw init up so that it's available for dpm init. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/si: drop cg_update from dpm codeAlex Deucher
I'm not entirely sure this is required and it won't work with the dpm restructing anyway. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23drm/radeon: expose render backend mask to the userspaceMarek Olšák
This will allow userspace to correctly program the PA_SC_RASTER_CONFIG register, so it can be considered a fix. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-12-23drm/radeon: fix render backend setup for SI and CIKMarek Olšák
Only the render backends of the first shader engine were enabled. The others were erroneously disabled. Enabling the other render backends improves performance a lot. Unigine Sanctuary on Bonaire: Before: 15 fps After: 90 fps Judging from the fan noise, the GPU was also underclocked when the other render backends were disabled, resulting in horrible performance. The fan is a lot noisy under load now. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-12-04drm/radeon: fixup bad vram size on SIAlex Deucher
Some boards seem to have garbage in the upper 16 bits of the vram size register. Check for this and clamp the size properly. Fixes boards reporting bogus amounts of vram. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-11-08Merge tag 'drm-intel-fixes-2013-11-07' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Bit a bit -fixes pull request in the merge window than usual dua to two feauture-y things: - Display CRCs are now enabled on all platforms, including the odd DP case on gm45/vlv. Since this is a testing-only feature it should ever hurt, but I figured it'll help with regression-testing -fixes. So I left it in and didn't postpone it to 3.14. - Display power well refactoring from Imre. Would have caused major pain conflict with the bdw stage 1 patches if I'd postpone this to -next. It's only an relatively small interface rework, so shouldn't cause pain. It's also been in my tree since almost 3 weeks already. That accounts for about two thirds of the pull, otherwise just bugfixes: - vlv backlight fix from Jesse/Jani - vlv vblank timestamp fix from Jesse - improved edp detection through vbt from Ville (fixes a vlv issue) - eDP vdd fix from Paulo - fixes for dvo lvds on i830M - a few smaller things all over Note: This contains a backmerge of v3.12. Since the -internal branch always applied on top of -nightly I need that unified base to merge bdw patches. So you'll get a conflict with radeon connector props when pulling this (and nouveau/master will also conflict a bit when Ben doesn't rebase). The backmerge itself only had conflicts in drm/i915. There's also a tiny conflict between Jani's backlight fix and your sysfs lifetime fix in drm-next. * tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits) drm/i915/vlv: use per-pipe backlight controls v2 drm/i915: make backlight functions take a connector drm/i915: move opregion asle request handling to a work queue drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV drm/i915: Make intel_dp_is_edp() less specific drm/i915: Give names to the VBT child device type bits drm/i915/vlv: enable HDA display audio for Valleyview2 drm/i915/dvo: call ->mode_set callback only when the port is running drm/i915: avoid unclaimed registers when capturing the error state drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv drm/i915: scramble reset support for DP port CRC on vlv drm/i915: scramble reset support for DP port CRC on g4x drm/i916: add "auto" pipe CRC source ... Conflicts: MAINTAINERS drivers/gpu/drm/i915/intel_panel.c drivers/gpu/drm/nouveau/core/subdev/mc/base.c drivers/gpu/drm/radeon/atombios_encoders.c drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-01drm/radeon: drop CP page table updates & cleanup v2Christian König
The DMA ring seems to be stable now. v2: remove pt_ring_index as well Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01drm/radeon: fix endian handling in rlc buffer setupAlex Deucher
The buffers needs to be in little endian format. Noticed-by: Sylvain BERTRAND <sylware@legeek.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-18drm/radeon: make missing smc ucode non-fatal (r7xx-SI)Alex Deucher
Prevent driver load problems if the smc is missing. bug: https://bugzilla.kernel.org/show_bug.cgi?id=63011 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: stable@vger.kernel.org
2013-10-09drm/radeon: improve soft reset on SIAlex Deucher
Disable CG/PG and stop the rlc before resetting. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-09-11drm/radeon: fix typo in PG flagsAlex Deucher
s/CG/PG/ in the GFX powergating flag name. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-09-11drm/radeon/si: properly handle internal cp intsAlex Deucher
The internal cp interrupts need to be enabled and disabled at specific times in order clockgating to work properly. This patch changes the handling of the CP_INT_CNTL register to respect the current state of the internal CP interrupts when making changes to the other interrupts in CP_INT_CNTL. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-30drm/radeon: fix init ordering for r600+Alex Deucher
The vram scratch buffer needs to be initialized before the mc is programmed otherwise we program 0 as the GPU address of the default GPU fault page. In most cases we put vram at zero anyway and reserve a page for the legacy vga buffer so in practice this shouldn't cause any problems, but better to make it correct. Was changed in: 6fab3febf6d949b0a12b1e4e73db38e4a177a79e Reported-by: FrankR Huang <FrankR.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: update line buffer allocation for dce6Alex Deucher
We need to allocate line buffer to each display when setting up the watermarks. Failure to do so can lead to a blank screen. This fixes blank screen problems on dce6 asics. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=64850 Based on an initial fix from: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon/si: Add support for CP DMA to CS checker for compute v2Tom Stellard
Also add a new RADEON_INFO query to check that CP DMA packets are supported on the compute ring. CP DMA has been supported since the 3.8 kernel, but due to an oversight we forgot to teach the CS checker that the CP DMA packet was legal for the compute ring on Southern Islands GPUs. This patch fixes a bug where the radeon driver will incorrectly reject a legal CP DMA packet from user space. I would like to have the patch backported to stable so that we don't have to require Mesa users to use a bleeding edge kernel in order to take advantage of this feature which is already present in the stable kernels (3.8 and newer). v2: - Don't bump kms version, so this patch can be backported to stable kernels. Cc: stable@vger.kernel.org Signed-off-by: Tom Stellard <thomas.stellard@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/si: enable DMA pg by defaultAlex Deucher
Enable DMA powergating by default. The DMA engines will be powergated when not in use. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/si: properly set up the clearstate buffer for pg (v2)Alex Deucher
The format of the clearstate buffer used for pg (powergating) changed between NI and SI. This formats it properly for what the hardware expects on SI. v2: fix addresses Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: fixes for gfx clockgating on SIAlex Deucher
Clockgating requires signalling between the CP and the RLC to work properly. Resetting the CP block in the CP resume code messed up the internal coordination between the blocks. Removing the reset allows gfx clockgating to work properly. However, when gfx clock gating is enabled, there is a strange interaction with dpm which causes the chip to stay in the high performance level all the time, so leave gfx clockgating disabled for now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/si: restructure cg code (v3)Alex Deucher
Resturcture clockgating code so that it can be enabled/disabled from other components such as dpm. v2: make function static v3: add fine grained cg controls Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: use new cg/pg flags for SIAlex Deucher
Allows us finer grained control over clock and powergating on SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: add audio support for DCE6/8 GPUs (v12)Alex Deucher
Similar to DCE4/5, but supports multiple audio pins which can be assigned per afmt block. v2: rework the driver to handle more than one audio pin. v3: try different dto reg v4: properly program dto v5 (ck): change dto programming order v6: program speaker allocation block v7: rebase v8: rebase on Rafał's changes v9: integrated Rafał's comments, update to latest drm_edid_to_speaker_allocation API v10: add missing line break in error message v11: add back audio enabled messages v12: fix copy paste typo in r600_audio_enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Rafał Miłecki <zajec5@gmail.com>
2013-08-30drm/radeon: separate DMA codeChristian König
Similar to separating the UVD code, just put the DMA functions into separate files. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: separate UVD code v3Christian König
Our different hardware blocks are actually completely separated, so it doesn't make much sense any more to structure the code by pure chipset generations. Start restructuring the code by separating our the UVD block. v2: updated commit message v3: rebased and restructurized start/stop functions for kv dpm. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: remove special handling for the DMA ringChristian König
Now that we have callbacks for [rw]ptr handling we can remove the special handling for the DMA rings and use the callbacks instead. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: rework UVD writeback & [rw]ptr handlingChristian König
The hardware just doesn't support this correctly. Disable it before we accidentally write anywhere we shouldn't. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: restructure UVD code to handle UVD PG (v2)Alex Deucher
When we PG (powergate) UVD, we need to re-initialize it before we can use it again. v2: rebase on UVD stop fixes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: implement clock and power gating for CIK (v3)Alex Deucher
Only the APUs support power gating. v2: disable cgcg for now v3: workaround hw issue in mgcg Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: convert SI,CIK to use sumo_rlc functionsAlex Deucher
and remove duplicate si_rlc functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/cik: restructure rlc setupAlex Deucher
Restructure rlc setup to handle clock and power gating. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: make missing smc ucode non-fatalAlex Deucher
The smc ucode is required for dpm (dynamic power management), but if it's missing just skip dpm setup and don't disable acceleration. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=67876 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: always program the MC on startupAlex Deucher
For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-07drm/radeon: fix halting UVDChristian König
Removing the clock/power or resetting the VCPU can cause hangs if that happens in the middle of a register write. Stall the memory and register bus before putting the VCPU into reset. Keep it in reset when unloading the module or suspending. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-29drm/radeon/si: disable cgcg and pg for nowAlex Deucher
Coarse grain clockgating causes problems with reclocking on some cards and powergating (verde only) causes problems with ring initialization. The proper fix (restructuring the init sequences) is too invasive for 3.11 so just disable them for now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-29drm/radeon: properly handle cg on asics without UVDAlex Deucher
Don't try and enable clockgating if the asic doesn't have UVD. Use rdev->has_uvd rather than using local checks. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-23drm/radeon: s/drm_order/order_base_2/Daniel Vetter
Last driver and pretty obviously a major user of this little function. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-17drm/radeon: add a module parameter to disable aspmAlex Deucher
Can cause hangs when enabled in certain motherboards. Set radeon.aspm=0 to disable aspm. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-14drm/radeon: add fault decode function for SI (v2)Alex Deucher
Helpful for debugging GPUVM errors as we can see what hw block and page generated the fault in the log. v2: simplify fault decoding Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-07-14drm/radeon: use radeon device for request firmwareJerome Glisse
Avoid creating temporary platform device that will lead to issue when several radeon gpu are in same computer. Instead directly use the radeon device for requesting firmware. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/si: fix typo in function nameAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for SI (v7)Alex Deucher
This adds dpm support for SI asics. This includes: - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2/gen3 switching - power containment - shader power scaling Set radeon.dpm=1 to enable. v2: enable hainan support, rebase v3: guard acpi stuff v4: fix 64 bit math v5: fix 64 bit div harder v6: fix thermal interrupt check noticed by Jerome v7: attempt fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-05 12:29:08 +0000