summaryrefslogtreecommitdiff
path: root/drivers/dma/dw/pci.c
AgeCommit message (Collapse)Author
2020-06-16dmaengine: dw: Register ACPI DMA controller for PCI that has companionAndy Shevchenko
If PCI enumerated controller has a companion device, register it in the ACPI DMA controllers as well. Fixes: f7c799e950f9 ("dmaengine: dw: we do support Merrifield SoC in PCI mode") Depends-on: b685fe26e9af ("dmaengine: dw: platform: Split ACPI helpers to separate module") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200526182416.52805-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21dmaengine: dw: Export struct dw_dma_chip_pdata for wider useAndy Shevchenko
We are expecting some devices can be enumerated either as PCI or ACPI. Nevertheless, they will share same information, thus, provide a generic struct dw_dma_chip_pdata for all glue drivers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190820131546.75744-4-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-20dmaengine: dw: Update Intel Elkhart Lake Service Engine acronymJarkko Nikula
Intel Elkhart Lake Offload Service Engine (OSE) will be called as Intel(R) Programmable Services Engine (Intel(R) PSE) in documentation. Update the comment here accordingly. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20190813080602.15376-1-jarkko.nikula@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart LakeAndy Shevchenko
Intel Elkhart Lake OSE (Offload Service Engine) provides few DMA controllers to the host. Enable them in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bitAndy Shevchenko
In the same way as done for ->probe(), call ->remove() based on the type of the hardware. While it works now due to equivalency of the two removal functions, it might be changed in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: dw: convert to SPDX identifiersAndy Shevchenko
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: dw: Split DW and iDMA 32-bit operationsAndy Shevchenko
Here is a kinda big refactoring that should have been done in the first place, when Intel iDMA 32-bit support appeared. It splits operations which are different to Synopsys DesignWare and Intel iDMA 32-bit controllers. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: dw: Remove unused internal propertyAndy Shevchenko
All known devices, which use DT for configuration, support memory-to-memory transfers. So enable it by default. The rest two cases, i.e. Intel Quark and PPC460ex, instantiate DMA driver and use its channels exclusively for hardware, which means there is no available channel for any other purposes anyway. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: dw: Remove misleading is_private propertyAndy Shevchenko
The commit a9ddb575d6d6 ("dmaengine: dw_dmac: Enhance device tree support") introduces is_private property in uncertain understanding what does it mean. First of all, documentation defines DMA_PRIVATE capability as Documentation/crypto/async-tx-api.txt: The DMA_PRIVATE capability flag is used to tag dma devices that should not be used by the general-purpose allocator. It can be set at initialization time if it is known that a channel will always be private. Alternatively, it is set when dma_request_channel() finds an unused "public" channel. A couple caveats to note when implementing a driver and consumer: 1/ Once a channel has been privately allocated it will no longer be considered by the general-purpose allocator even after a call to dma_release_channel(). 2/ Since capabilities are specified at the device level a dma_device with multiple channels will either have all channels public, or all channels private. Documentation/driver-api/dmaengine/provider.rst: - DMA_PRIVATE The devices only supports slave transfers, and as such isn't available for async transfers. The capability had been introduced by the commit 59b5ec21446b ("dmaengine: introduce dma_request_channel and private channels") and some code didn't changed from that times ever. Taking into consideration above and the fact that on all known platforms Synopsys DesignWare DMA engine is attached to serve slave transfers, the DMA_PRIVATE capability must be enabled for this device unconditionally. Otherwise, as rightfully noticed in drivers/dma/at_xdmac.c: /* * Without DMA_PRIVATE the driver is not able to allocate more than * one channel, second allocation fails in private_candidate. */ because of of a caveats mentioned in above documentation excerpts. So, remove conditional around DMA_PRIVATE followed by removal leftovers. If someone wonders, DMA_PRIVATE can be not used if and only if the all channels of the DMA controller are supposed to serve memory-to-memory like operations. For example, EP93xx has two controllers, one of which can only perform memory-to-memory transfers Note, this change doesn't affect dmatest to be able to test such controllers. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (maintainer:SERIAL DRIVERS) Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: dw: Add missed multi-block support for iDMA 32-bitAndy Shevchenko
Intel integrated DMA 32-bit support multi-block transfers. Add missed setting to the platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2017-01-25dmaengine: dw: we do support Merrifield SoC in PCI modeAndy Shevchenko
Intel Merrifield platform contains Intel integrated DMA (iDMA 32-bit) which has a slightly different register mapping, e.g. some bits in CTL_* and CFG_* channel registers, and has to use platform data since there is no autoconfiguration. The iDMA 32-bit specification is available in the publicly available documentation for Intel Braswell and BayTrail SoCs as LPE Audio DMA. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-25dmaengine: dw: register IRQ and DMA pool with instance IDAndy Shevchenko
It is really useful not only for debugging to have an IRQ line and DMA pool labeled with driver and its instance ID. Do this for DesignWare DMA driver. All current users of this IP would be enhanced later on. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-10dmaengine: dw: pci: remove LPE Audio DMA IDAndy Shevchenko
LPE Audio driver should take care of DMA IPs by itself. Keeping an ID like this in dw_dma_pci.c is anyway wrong since that block has two DMA controllers under one ID (like MFD device). That's also why I didn't include LPE Audio ID for Intel Merrifield previously. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-02dmaengine: dw: pass platform data via struct dw_dma_chipAndy Shevchenko
We pass struct dw_dma_chip to dw_dma_probe() anyway, thus we may use it to pass a platform data as well. While here, constify the source of the platform data. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-08dmaengine: dw: pci: add ID for WildcatPoint PCHAndy Shevchenko
WildcatPoint PCH as seen on MacBook 12-inch (Early 2015) has PCI enabled DesignWare DMA controller. Enable it by adding its ID to the corresponding driver. Reported-by: Leif Liddy <leif.liddy@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=110901 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30dmaengine: dw: use dw_dmac autoconfiguration in PCI driverAndy Shevchenko
Instead of hardconding a platform data for dw_dmac let's use it's own autoconfiguration feature. Thus, remove hardcoded values. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15dmaengine: dw: always export dw_dma_{en,dis}ableAndy Shevchenko
Instead of conditional exporing of dw_dma_suspend() / dw_dma_resume() let's export dw_dma_disable() / dw_dma_enable(). Since dw_dma_shutdown() repeats dw_dma_disable() we may safely remove it at all. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11dmaengine: dw: add PCI IDs for Braswell DMAsAndy Shevchenko
Braswell SoC has two DMA controllers for LPSS. This patch adds them to supported list in the PCI driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-21dma: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is deprecated. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dmaengine: dw: convert to use SET_LATE_SYSTEM_SLEEP_PM_OPSAndy Shevchenko
The commit 4501fe61 "dma: dw: Add suspend and resume handling for PCI mode DW_DMAC." introduces system power management callbacks. Regarding to commit f78c4cff "PM / Sleep: Add macro to define common late/early system PM callbacks" we have nice macro to setup dev_pm_ops structure. This patch converts a driver to use the macro. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-26dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.Chew, Chiau Ee
This is to disable/enable DW_DMAC hw during late suspend/early resume. Since DMA is providing service to other clients (eg: SPI, HSUART), we need to ensure DMA suspends after the clients and resume before the clients are active. Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-11dma: dw: add a PCI ID for Intel Haswell SoCAndy Shevchenko
In case of PCI mode the DMA controller has a specific ID. Put this ID to the list of supported. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: dw: add PCI part of the driverAndy Shevchenko
This is the PCI part of the DesignWare DMAC driver. The controller is usually used in the Intel hardware such as Intel Medfield. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 16:18:38 +0000