summaryrefslogtreecommitdiff
path: root/drivers/clk/versatile
AgeCommit message (Collapse)Author
2021-06-04clk: versatile: Depend on HAS_IOMEMStephen Boyd
kbuild robot reports that s390 fails to build this driver with COMPILE_TEST. Let's depend on HAS_IOMEM so that s390 doesn't try to build it. Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Fixes: 419b3ab6987f ("clk: versatile: remove dependency on ARCH_*") Link: https://lore.kernel.org/r/20210604192321.2594519-1-sboyd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-01clk: versatile: remove dependency on ARCH_*Peter Collingbourne
It is now possible to build a modular kernel for vexpress by not setting CONFIG_ARCH_VEXPRESS=y and instead setting =m on the drivers that it normally implies. This is with the exception of CLK_VEXPRESS_OSC which is currently hidden behind a dependency on one of several ARCH_* variables. Remove that dependency so that CLK_VEXPRESS_OSC may be enabled without it. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I435a21e2e5f6187db54f4ef2079b60028ab2ea69 Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210520161702.3746174-1-lee.jones@linaro.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11clk: versatile: clk-icst: Fix worthy struct documentation blockLee Jones
Also demote non-worthy header to standard comment block. Fixes the following W=1 kernel build warning(s): drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'map' not described in 'clk_icst' drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'vcoreg_off' not described in 'clk_icst' drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'lockreg_off' not described in 'clk_icst' drivers/clk/versatile/clk-icst.c:435: warning: cannot understand function prototype: 'const struct icst_params icst525_apcp_cm_params = ' Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-20-lee.jones@linaro.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-10clk: versatile: Add of_node_put() before return statementSumera Priyadarsini
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in clk-impd1.c by inserting of_node_put() before a return statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Link: https://lore.kernel.org/r/20200829175704.GA10998@Kaladin Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-10Replace HTTP links with HTTPS ones: Common CLK frameworkAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200703175114.15027-1-grandmaster@al2klimov.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-04Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...
2020-05-29ARM: zynq: Don't select CONFIG_ICSTRob Herring
CONFIG_ICST is for ARM Ltd reference platforms and isn't used by Zynq platform, so remove selecting it. It appears to be a copy-n-paste error. Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rob Herring <robh@kernel.org> [arnd: remove the versatile clk driver change I added previously] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILERob Herring
If COMPILE_TEST is enabled, then COMMON_CLK_VERSATILE can be disabled when dependent options like ICST are selected resulting in kconfig warnings: WARNING: unmet direct dependencies detected for ICST Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_VERSATILE [=n] Selected by [y]: - ARCH_REALVIEW [=y] && (ARCH_MULTI_V5 [=n] || ARCH_MULTI_V6 [=n] || ARCH_MULTI_V7 [=y]) - ARCH_VEXPRESS [=y] && ARCH_MULTI_V7 [=y] - ARCH_ZYNQ [=y] && ARCH_MULTI_V7 [=y] WARNING: unmet direct dependencies detected for CLK_SP810 Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_VERSATILE [=n] Selected by [y]: - ARCH_REALVIEW [=y] && (ARCH_MULTI_V5 [=n] || ARCH_MULTI_V6 [=n] || ARCH_MULTI_V7 [=y]) Fix this by dropping COMMON_CLK_VERSATILE and just using 'menu' instead of 'menuconfig'. [arnd: add ZYNQ to the dependency list] Link: https://lore.kernel.org/r/20200527181307.2482167-1-robh@kernel.org Fixes: 81134fb541d4 ("clk: versatile: Rework kconfig structure") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26clk: versatile: remove redundant assignment to pointer clkColin Ian King
The pointer clk is being initialized with a value that is never read and is being updated with a new value later on. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lkml.kernel.org/r/20200526224116.63549-1-colin.king@canonical.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-15Merge tag 'vexpress-modules-for-soc-v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc VExpress modularization This series enables building various Versatile Express platform drivers as modules. The primary target is the Fast Model FVP which is supported in Android. As Android is moving towards their GKI, or generic kernel, the hardware support has to be in modules. Currently ARCH_VEXPRESS enables several built-in only drivers. Some of these are needed, but some are only needed for older 32-bit VExpress platforms and can just be disabled. * tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: vexpress: Don't select VEXPRESS_CONFIG bus: vexpress-config: Support building as module vexpress: Move setting master site to vexpress-config bus bus: vexpress-config: simplify config bus probing bus: vexpress-config: Merge vexpress-syscfg into vexpress-config mfd: vexpress-sysreg: Support building as a module mfd: vexpress-sysreg: Use devres API variants mfd: vexpress-sysreg: Drop unused syscon child devices mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO clk: vexpress-osc: Support building as a module clk: vexpress-osc: Use the devres clock API variants clk: versatile: Only enable SP810 on 32-bit by default clk: versatile: Rework kconfig structure amba: Retry adding deferred devices at late_initcall arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS ARM: vexpress: Move vexpress_flags_set() into arch code Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-15clk: versatile: Drop the legacy IM-PD1 clock codeRob Herring
Now that the non-DT IM-PD1 support code has been removed, drop the clock related code from clk-impd1.c. Link: https://lore.kernel.org/r/20200428204945.21067-1-robh@kernel.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-13clk: vexpress-osc: Support building as a moduleRob Herring
Enable building the vexpress-osc clock driver as a module. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-05clk: impd1: Look up clock-output-namesLinus Walleij
The IM-PD1 still need to pass the clock output names. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lkml.kernel.org/r/20200416081348.326833-1-linus.walleij@linaro.org Fixes: 84655b762a27 ("clk: versatile: Add device tree probing for IM-PD1 clocks") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-05clk: vexpress-osc: Use the devres clock API variantsRob Herring
In preparation to enable the vexpress-osc clock driver as a module, convert the driver to use the managed devres clock API variants. With this, a driver .remove() hook is not needed. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-clk@vger.kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-05clk: versatile: Only enable SP810 on 32-bit by defaultRob Herring
While 64-bit Arm reference platforms have SP810 for clocks for SP804 timers, they are not needed since the arch timers are used instead. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-clk@vger.kernel.org Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-05clk: versatile: Rework kconfig structureRob Herring
CONFIG_COMMON_CLK_VERSATILE doesn't really do anything other than hiding Arm Ltd reference platform clock drivers. It is both selected by the platforms that need it and has a 'depends on' for those platforms. Let's drop the selects and convert CONFIG_COMMON_CLK_VERSATILE into a menuconfig entry. With this make CONFIG_ICST visible. Move the 'select REGMAP_MMIO' to the drivers that require it (SP810 did not). This also has the side effect of enabling CONFIG_ICST for COMPILE_TEST as it was not visible before. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-20clk: versatile: Add device tree probing for IM-PD1 clocksLinus Walleij
As we want to move these clocks over to probe from the device tree we add a device tree probing path. The old platform data path will be deleted once we have the device tree overall code in place. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lkml.kernel.org/r/20200219103326.81120-3-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-20clk: versatile: Export icst_clk_setup()Linus Walleij
Export this clock setup method so we can register the IM-PD1 clocks with common code in the next step. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lkml.kernel.org/r/20200219103326.81120-2-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-04clk: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lkml.kernel.org/r/1574306335-29026-1-git-send-email-krzk@kernel.org [sboyd@kernel.org: Fixup mediatek to have two spaces for help indent] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-07clk: versatile: Add of_node_put() in cm_osc_setup()Nishka Dasgupta
In function cm_osc_setup, variable parent takes the value returned by of_get_parent, which gets a node but does not put it. If parent is not put before it goes out of scope, it may cause a memory leak. Hence put parent before the function terminates. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lkml.kernel.org/r/20190804163445.6862-1-nishkadg.linux@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: versatile: sp810: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this driver as it doesn't provide any benefit. Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-16clk: versatile: Remove WARNs in ->round_rate()Brian Starkey
clk_round_rate() is intended to be used to round a given clock rate to the closest one achievable by the actual clock. This implies that the input to clk_round_rate() is expected to be unachievable - and such cases shouldn't be treated as exceptional. To reflect this, remove the WARN_ONs which trigger when an unachievable clock rate is passed to vexpress_osc_round_rate(). Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Brian Starkey <brian.starkey@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-16clk: versatile: add min/max rate boundaries for vexpress osc clockSudeep Holla
Clock framework has a provider API(clk_hw_set_rate_range) to set the min/max rate of a clock. Use the same to set the boundaries for the vexpress osc clock. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-11-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ...
2017-11-13clk: versatile: Improve sizeof() usageMarkus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-13clk: versatile: Delete error messages for failed memory allocationsMarkus Elfring
Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30clk: versatile: make clk_ops constBhumika Goyal
Make this const as it is only stored in the const field of a clk_init_data structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02clk: versatile: delete old RealView clock implementationLinus Walleij
The old RealView clock implementation is not used anymore (nothing in the kernel calls realview_clk_init()) as we have moved all clocks over to device tree. Delete it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-07ARM/clk: move the ICST library to drivers/clkLinus Walleij
This moves the ICST clock divider helper library from arch/arm/common to drivers/clk/versatile so it is maintained with the other clock drivers. We keep the structure as a helper library intact and do not fuse it with the clk-icst.c Versatile ICST clock driver: there may be other users out there that need to use this library for their clocking, and then it will be helpful to keep the library contained. (The icst.[c|h] files could just be moved to drivers/clk/lib or a similar location to share the library.) Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-29clk: versatile/icst: support for AP baseboard clocksLinus Walleij
This adds support for the two ICST525-based clocks on the Integrator/AP baseboard, as documented in the board manual "Integrator/AP ASIC Development Motherboard", ARM DUI0098 B, pages 3-15 thru 3-18. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [sboyd@codeaurora.org: fixed uninitialized val warning] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-25clk: versatile/icst: add Integrator core module clocksLinus Walleij
The Integrator/AP and Integrator/CP have special derivatives of the ICST525 control registers, where some bits have been hardwired but others are possible to adjust, resulting in a control register that makes it possible to set an even, desired megahertz value. The Integrator/AP and Integrator/CP have slightly different layout so we support them using different compatible strings. After adding these clocks, the Integrator-specific cpufreq driver can be switched over to use the generic operating point device tree cpufreq driver. Instead of simply writing a value to the oscillator control register we switch to the more elaborate method of providing a bitmask and use regmap_update_bits() to poke the right bits for the desired frequency, this is needed since these control registers sometimes control more than one clock. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-15clk: versatile: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now. Remove usage of the flag. Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-25clk: versatile: sp810: support reentranceLinus Walleij
Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c4385 "clk: vexpress: Add separate SP810 driver" Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-10clk: versatile: mask VCO bits before writingLinus Walleij
The Versatile syscon ICST driver OR:s the bits into place but forgets to mask the previous value, making the code only work if the register is zero or giving haphazard results. Mask the 19 bits used by the Versatile syscon interface register. Regression caused and now fixed by yours truly. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Fixes: 179c8fb3c2a6 ("clk: versatile-icst: convert to use regmap") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-20Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2015-12-16Merge tag 'realview-base-armsoc-1-tag' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/multiplatform Merge "Realview multiplatform support" from Linus Walleij: The board and infrastructure changes for RealView multiplatform and extended DT support. * tag 'realview-base-armsoc-1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: realview: add an DT SMP boot method ARM: realview: select SP810 and ICST for the DT variant soc: versatile: add support for the PB11MPCore clk: versatile-icst: add device tree support clk: versatile-icst: refactor to allocate regmap separately clk: versatile-icst: convert to use regmap ARM: realview: remove private barrier implementation ARM: no longer force unbuffered DMA for realview clk/realview: stop using machine headers ARM: realview: don't map undefined PCI registers ARM: realview: remove sparsemem hack Conflicts: drivers/clk/versatile/Kconfig
2015-12-15ARM: versatile: switch to DT only booting and remove legacy codeRob Herring
With DT support for clocks, irqchips, timers, and PCI now in place, DT based booting has feature parity with non-DT legacy boot. The final piece is actually enabling common clock support on Versatile. Enabling full DT support requires either removing the old Versatile clock code, updating the legacy boot to use the common clock code, or making DT and legacy boot mutually exclusive. Given that removing legacy boot code is the goal anyway, I am going with the 1st option. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-15clk: versatile-icst: add device tree supportLinus Walleij
This adds support for the ARM syscon ICST clocks to initialized directly from the device tree syscon node on ARM Integrator, Versatile and RealView reference designs. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15clk: versatile-icst: refactor to allocate regmap separatelyLinus Walleij
Break out the registration function so it creates a regmap and pass to the setup function, so the latter can be shared with a device tree probe function that already has a regmap. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15clk: versatile-icst: convert to use regmapLinus Walleij
Instead of passing around register bases, pass around a regmap in this driver. This refactoring make things so much easier when we later want to manage an ICST that is part of a syscon. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15clk/realview: stop using machine headersArnd Bergmann
In order to move realview into multiplatform, we have to prevent device drivers from accessing the machine header files. In case of the clk driver, this is very simple, we just copy the small set of register definitions into the driver that needs them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-20clk: versatile: remove unneeded error messageSudip Mukherjee
If kzalloc fails we will already have many messages in the log and we do not need another message to know that kzalloc for sp810 has failed. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-18clk: versatile: fix memory leakSudip Mukherjee
If of_clk_parent_fill() fails then we printed an error message and returned. But we missed freeing sp810. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 13:58:30 +0000