summaryrefslogtreecommitdiff
path: root/drivers/clk/tegra
AgeCommit message (Collapse)Author
2015-04-10clk: tegra: Use the proper parent for plld_dsiThierry Reding
The current parent, plld_out0, does not exist. The proper name is pll_d_out0. While at it, rename the plld_dsi clock to pll_d_dsi_out to be more consistent with other clock names. Fixes: b270491eb9a0 ("clk: tegra: Define PLLD_DSI and remove dsia(b)_mux") Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Use generic tegra_osc_clk_init() on Tegra114Thierry Reding
There is no reason why Tegra114 cannot use the same generic code to set up the oscillator, clk_m and pll_ref clocks. The only effective change that this causes is that the CLK_SET_PARENT_RATE flag is dropped, but since these clocks are all fixed it is not needed anyway. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Model oscillator as clockThierry Reding
Currently the Tegra clock driver simplifies the clock tree somewhat by taking advantage of the fact that clk_m runs at the same frequency as the oscillator. While that's true on all currently supported SoCs, it does not apply to Tegra210 anymore. On Tegra210 clk_m is typically divided down from the oscillator frequency. To support that setup, add a separate clock for the oscillator that both clk_m and pll_ref derive from. Modify the tegra_osc_clk_init() function to take an additional divider parameter for clk_m. Existing SoCs always pass in 1, whereas Tegra210 will read the divider from a register in the clock & reset controller. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Add peripheral registers for bank YThierry Reding
Tegra210 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Register the proper number of resetsThierry Reding
The number of resets controls is 32 times the number of peripheral register banks rather than 32 times the number of clocks. This reduces (drastically) the number of reset controls registered from 10080 (315 clocks * 32) to 224 (6 peripheral register banks * 32). This also fixes a potential crash because trying to use any of the excess reset controls (224-10079) would have caused accesses beyond the array bounds of the peripheral register banks definition array. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Fixes: 6d5b988e7dc5 ("clk: tegra: implement a reset driver") Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Remove needless initializationsThierry Reding
The ret variable is often explicitly initialized to 0, but there is no need to do so in many cases because it will immediately be overwritten with the return value from a function. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Use consistent indentationThierry Reding
Some of the .dev_id entries in the devclks table were oddly indented. Make them consistent with the rest of the table. Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Various whitespace cleanupsThierry Reding
Make usage of blank lines as separators more consistent. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Enable HDA to HDMI clocks on Tegra124Dylan Reid
Add the clocks used for HDMI audio played through the HDA controller. Initialize the codec clock to 48Mhz and the HDA clock to 102MHz per the TRM. Signed-off-by: Dylan Reid <dgreid@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Fix a bunch of sparse warningsThierry Reding
The second to last parameter of the TEGRA_CLK_PERIPH macro denotes a table and should therefore users should pass in NULL instead of 0. Fixes a bunch of sparse warnings like this: warning: Using plain integer as NULL pointer Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Fix typo tabel -> tableThierry Reding
The clock initialization structure is named struct clk_init_table. Update the kerneldoc comment to use the correct name. Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-02-18clk: Replace explicit clk assignment with __clk_hw_set_clkJavier Martinez Canillas
The change in the clk API to return a per-user clock instance, moved the clock state to struct clk_core so now the struct clk_hw .core field is used instead of .clk for most operations. So for hardware clocks that needs to share the same clock state, both the .core and .clk pointers have to be assigned but currently only the .clk is set. This leads to NULL pointer dereference when the operations try to access the hw clock .core. For example, the composite clock rate and mux components didn't have a .core set which leads to this error: Unable to handle kernel NULL pointer dereference at virtual address 00000034 pgd = c0004000 [00000034] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-next-20150211-00002-g1fb7f0e1150d #423 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: ee480000 ti: ee488000 task.ti: ee488000 PC is at clk_mux_determine_rate_flags+0x14/0x19c LR is at __clk_mux_determine_rate+0x24/0x2c pc : [<c03a355c>] lr : [<c03a3734>] psr: a0000113 sp : ee489ce8 ip : ee489d84 fp : ee489d84 r10: 0000005c r9 : 00000001 r8 : 016e3600 r7 : 00000000 r6 : 00000000 r5 : ee442200 r4 : ee440c98 r3 : ffffffff r2 : 00000000 r1 : 016e3600 r0 : ee440c98 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee488210) Stack: (0xee489ce8 to 0xee48a000) 9ce0: 00000000 ffffffff 60000113 ee440c98 ee442200 00000000 9d00: 016e3600 ffffffff 00000001 0000005c ee489d84 c03a3734 ee489d80 ee489d84 9d20: 00000000 c048b130 00000400 c03a5798 ee489d80 ee489d84 c0607f60 ffffffea 9d40: 00000001 00000001 ee489d5c c003f844 c06e3340 ee402680 ee440d0c ed935000 9d60: 016e3600 00000003 00000001 0000005c eded3700 c03a11a0 ee489d80 ee489d84 9d80: 016e3600 ee402680 c05b413a eddc9900 016e3600 c03a1228 00000000 ffffffff 9da0: ffffffff eddc9900 016e3600 c03a1c1c ffffffff 016e3600 ed8c6710 c03d6ce4 9dc0: eded3400 00000000 00000000 c03c797c 00000001 0000005c eded3700 eded3700 9de0: 000005e0 00000001 0000005c c03db8ac c06e7e54 c03c8f08 00000000 c06e7e64 9e00: c06b6e74 c06e7f64 000005e0 c06e7df8 c06e5100 00000000 c06e7e6c c06e7f54 9e20: 00000000 00000000 eebd9550 00000000 c06e7da0 c06e7e54 ee7b5010 c06e7da0 9e40: eddc9690 c06e7db4 c06b6e74 00000097 00000000 c03d4398 00000000 ee7b5010 9e60: eebd9550 c06e7da0 00000000 c03db824 ee7b5010 fffffffe c06e7db4 c0299c7c 9e80: ee7b5010 c072a05c 00000000 c0298858 ee7b5010 c06e7db4 ee7b5044 00000000 9ea0: eddc9580 c0298a04 c06e7db4 00000000 c0298978 c02971d4 ee405c78 ee732b40 9ec0: c06e7db4 eded3800 c06d6738 c0298044 c0608300 c06e7db4 00000000 c06e7db4 9ee0: 00000000 c06beb58 c06beb58 c0299024 00000000 c068dd00 00000000 c0008944 9f00: 00000038 c049013c ee462200 c0711920 ee480000 60000113 c06c2cb0 00000000 9f20: 00000000 c06c2cb0 60000113 00000000 ef7fcafc 00000000 c0640194 c00389ec 9f40: c05ec3a8 c063f824 00000006 00000006 c06c2c50 c0696444 00000006 c0696424 9f60: c06ee1c0 c066b588 c06b6e74 00000097 00000000 c066bd44 00000006 00000006 9f80: c066b588 c003d684 00000000 c0481938 00000000 00000000 00000000 00000000 9fa0: 00000000 c0481940 00000000 c000e680 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c03a355c>] (clk_mux_determine_rate_flags) from [<c03a3734>] (__clk_mux_determine_rate+0x24/0x2c) [<c03a3734>] (__clk_mux_determine_rate) from [<c03a5798>] (clk_composite_determine_rate+0xbc/0x238) [<c03a5798>] (clk_composite_determine_rate) from [<c03a11a0>] (clk_core_round_rate_nolock+0x5c/0x9c) [<c03a11a0>] (clk_core_round_rate_nolock) from [<c03a1228>] (__clk_round_rate+0x38/0x40) [<c03a1228>] (__clk_round_rate) from [<c03a1c1c>] (clk_round_rate+0x20/0x38) [<c03a1c1c>] (clk_round_rate) from [<c03d6ce4>] (max98090_dai_set_sysclk+0x34/0x118) [<c03d6ce4>] (max98090_dai_set_sysclk) from [<c03c797c>] (snd_soc_dai_set_sysclk+0x38/0x80) [<c03c797c>] (snd_soc_dai_set_sysclk) from [<c03db8ac>] (snow_late_probe+0x24/0x48) [<c03db8ac>] (snow_late_probe) from [<c03c8f08>] (snd_soc_register_card+0xf04/0x1070) [<c03c8f08>] (snd_soc_register_card) from [<c03d4398>] (devm_snd_soc_register_card+0x30/0x64) [<c03d4398>] (devm_snd_soc_register_card) from [<c03db824>] (snow_probe+0x68/0xcc) [<c03db824>] (snow_probe) from [<c0299c7c>] (platform_drv_probe+0x48/0x98) [<c0299c7c>] (platform_drv_probe) from [<c0298858>] (driver_probe_device+0x114/0x234) [<c0298858>] (driver_probe_device) from [<c0298a04>] (__driver_attach+0x8c/0x90) [<c0298a04>] (__driver_attach) from [<c02971d4>] (bus_for_each_dev+0x54/0x88) [<c02971d4>] (bus_for_each_dev) from [<c0298044>] (bus_add_driver+0xd8/0x1cc) [<c0298044>] (bus_add_driver) from [<c0299024>] (driver_register+0x78/0xf4) [<c0299024>] (driver_register) from [<c0008944>] (do_one_initcall+0x80/0x1d0) [<c0008944>] (do_one_initcall) from [<c066bd44>] (kernel_init_freeable+0x10c/0x1d8) [<c066bd44>] (kernel_init_freeable) from [<c0481940>] (kernel_init+0x8/0xe4) [<c0481940>] (kernel_init) from [<c000e680>] (ret_from_fork+0x14/0x34) Code: e24dd00c e5907000 e1a08001 e88d000c (e5970034) The changes were made using the following cocinelle semantic patch: @i@ @@ @depends on i@ identifier dst; @@ - dst->clk = hw->clk; + __clk_hw_set_clk(dst, hw); @depends on i@ identifier dst; @@ - dst->hw.clk = hw->clk; + __clk_hw_set_clk(&dst->hw, hw); Fixes: 035a61c314eb3 ("clk: Make clk API return per-user struct clk instances") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-02clk: tegra: Define PLLD_DSI and remove dsia(b)_muxMark Zhang
PLLD is the only parent for DSIA & DSIB on Tegra124 and Tegra132. Besides, BIT 30 in PLLD_MISC register controls the output of DSI clock. So this patch removes "dsia_mux" & "dsib_mux", and create a new clock "plld_dsi" to represent the DSI clock enable control. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mark Zhang <markz@nvidia.com>
2015-02-02clk: tegra: Add support for the Tegra132 CAR IP blockPaul Walmsley
Tegra132 CAR supports almost the same clocks as Tegra124 CAR. This patch mostly deals with the small differences. Since Tegra132 contains many of the same PLL clock sources used on Tegra114 and Tegra124, enable them in drivers/clk/tegra/clk-pll.c when the kernel is configured to include Tegra132 support. This patch is based on several patches from others: 1. a patch from Peter De Schrijver: http://lkml.iu.edu/hypermail/linux/kernel/1407.1/06094.html 2. a patch from Bill Huang ("clk: tegra: enable cclk_g at boot on Tegra132"), and 3. a patch from Allen Martin ("clk: Enable tegra clock driver for tegra132"). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Bill Huang <bilhuang@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org>
2015-02-02clk: tegra: make tegra_clocks_apply_init_table() arch_initcallPeter De Schrijver
tegra_clocks_apply_init_table() needs to be called after the udelay loop has been calibrated (see commit 441f199a37cfd66c5dd8dd45490bd3ea6971117d ("clk: tegra: defer application of init table") for why that is). On existing Tegra SoCs this was done by calling tegra_clocks_apply_init_table() from tegra_dt_init(). To make this also work on ARM64, we need to change this into an initcall. tegra_dt_init() is called from customize_machine which is an arch_initcall. Therefore this should also work on existing 32bit Tegra SoCs. Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and Tegra132. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [paul@pwsan.com: tweaked the commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com>
2015-02-02clk: tegra: Fix order of arguments in WARNTomeu Vizoso
As previously the names of the present clock and its parent were swapped. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2015-02-02clk: tegra124: Add init data for dsi lp clocksSean Paul
Set the parent of the dsi lp clocks to pll_p and the rate to 68MHz. The default parent is clk_m and rate is 12MHz, this is too slow to receive data from the peripheral. Per NVidia HW engineers, the optimal rate is 70MHz, but 68MHz will suffice. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2015-02-02clk: tegra: SDMMC controllers are on APBAndrew Bresticker
Since the SDMMC controller registers are accessed via the APB, the APB must be flushed before gating the SDMMC clocks to prevent register accesses to the SDMMC controllers after their clocks are gated. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-11-26clk: tegra: Implement memory-controller clockThierry Reding
The memory controller clock runs either at half or the same frequency as the EMC clock. Reviewed-By: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-09-18clk: tegra: Make clock initialization more robustTomeu Vizoso
Don't abort clock initialization if we cannot match an entry in tegra_clk_init_table to a valid entry in the clk array. Also log a corresponding error message. This was discovered when testing a patch that removed the EMC clock from tegra124_clks but left a mention in tegra_clk_init_table. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-09-18clk: tegra124: Add PLL_M_UD and PLL_C_UD clocksMikko Perttunen
These clocks are used as parents for some EMC timings. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-07-17ARM: tegra: Convert PMC to a driverThierry Reding
This commit converts the PMC support code to a platform driver. Because the boot process needs to call into this driver very early, also set up a minimal environment via an early initcall. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17ARM: tegra: Move includes to include/soc/tegraThierry Reding
In order to not clutter the include/linux directory with SoC specific headers, move the Tegra-specific headers out into a separate directory. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-08clk: tegra: Use XUSB-compatible SATA PLL sequenceMikko Perttunen
Use a sequence for enabling hardware control of the SATA PLL that works both when using the SATA lane with SATA and when using it with XUSB. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
2014-06-30clk: tegra: export clock names for debuggingPeter De Schrijver
When writing a module for testing or debugging purposes, there is no way to get hold of clk handles. This patch solves this by exposing all valid clocks as clkdev's for the virtual device tegra-clk-debug. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-06-27clk: tegra124: init table updatesPeter De Schrijver
Ensure some clocks critical for system operation are always. Also enable csite for JTAG debugging and set the tsensor and soc_therm clock frequencies for the upcoming soctherm driver. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-06-25clk: tegra: Add SATA clocks to Tegra124 initialization tableMikko Perttunen
This adds two clocks, SATA and SATA_OOB, to the Tegra124 clock initialization table. The clocks are needed for working SATA support. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2014-06-25clk: tegra: Enable hardware control of SATA PLLMikko Perttunen
This makes the SATA PLL be controlled by hardware instead of software. This is required for working SATA support. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2014-06-25clk: tegra: fix vi_sensor clocks on Tegra124Peter De Schrijver
vi_sensor and vi_sensor2 have a wrong hw clkid on Tegra124. Fix this by correcting the hw clkid for Tegra124 and creating the Tegra114 vi_sensor clock from its own data. Tegra124 was also using the wrong internal clock id. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-05-28Merge branch 'clk-fixes' into clk-nextMike Turquette
2014-05-27Merge tag 'clk-tegra-fixes-3.15' of ↵Mike Turquette
git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-fixes PLLE fixes for 3.15
2014-05-22clk: tegra: Initialize xusb clocksAndrew Bresticker
Initialize the XUSB-related clocks with appropriate parents and rates for both Tegra114 and Tegra124. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-22clk: tegra: Fix xusb_hs_src clock hierarchyAndrew Bresticker
Currently the Tegra1x4 clock init code hard-codes the mux setting for xusb_hs_src and treats it as a fixed-factor clock. It is, however, a mux which can be parented by either xusb_ss_src/2 or pll_u_60M. Add the fixed-factor clock xusb_ss_div2 and put an entry in periph_clks[] for the xusb_hs_src mux. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-22clk: tegra: Fix xusb_fs_src muxJim Lin
The parent-to-index mapping for xusb_fs_src is incorrect. Fix it by adding a mux table. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-22clk: tegra: Enable hardware control of PLLEJim Lin
Enable hardware control of PLLE spread-spectrum, IDDQ, and enable controls when enabling PLLE. The hardware (e.g. XUSB) using PLLE will use these controls for power-saving optimizations. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-16clk: tegra: Fix wrong value written to PLLE_AUXTuomas Tynkkynen
The value written to PLLE_AUX was incorrect due to a wrong variable being used. Without this fix SATA does not work. Cc: stable@vger.kernel.org Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: improved changelog]
2014-04-24clk: tegra: remove non-existent clocksStephen Warren
The Tegra124 clock driver currently provides 3 clocks that don't actually exist; 2 for NAND and one for UART5/UARTE. Delete these. Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-17clk: tegra: Fix enabling of PLLEThierry Reding
When enabling the PLLE as its final step, clk_plle_enable() would accidentally OR in the value previously written to the PLLE_SS_CTRL register. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-17clk: tegra: Introduce divider mask and shift helpersThierry Reding
Add div{m,n,p}_shift() and div{m,n,p}_mask_shifted() helpers to make the code that modifies the m-, n- and p-divider fields of PLLs shorter and easier to read. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-17clk: tegra: Fix PLLE programmingThierry Reding
PLLE has M, N and P divider shift and width parameters that differ from the defaults. Furthermore, when clearing the M, N and P divider fields the corresponding masks were never shifted, thereby clearing only the lowest bits of the register. This lead to a situation where the PLLE programming would only work if the register hadn't been touched before. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2014-02-24Merge branch 'clk-fixes' into clk-nextMike Turquette
2014-02-23clk: tegra: Staticize tegra_clk_periph_no_gate_opsSachin Kamat
tegra_clk_periph_no_gate_ops is a local symbol. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-02-20clk: tegra124: remove gr2d and gr3d clocksPeter De Schrijver
Tegra124 does not have gr2d and gr3d clocks. They have been replaced by the vic03 and gpu clocks respectively. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-02-20clk: tegra: Fix vic03 mux indexPeter De Schrijver
The vic03 mux uses a linear mapping. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-02-17clk: tegra: use max divider if divider overflowsAndrew Bresticker
When requesting a rate less than the minimum clock rate for a divider, use the maximum divider value instead of bailing out with an error. This matches the behavior of the generic clock divider. Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
2014-02-17clk: tegra: cclk_lp has a pllx/2 dividerAndrew Bresticker
When pll_x is the parent of cclk_lp, PLLX_DIV2_BYPASS_LP determines whether cclk_lp output is divided by 2. Set TEGRA_DIVIDER_2 so that the clk_super driver is aware of this. Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
2014-02-17clk: tegra: fix sdmmc clks on Tegra1x4Andrew Bresticker
The sdmmc clocks on Tegra114 and Tegra124 are 3-bit wide muxes with 6 parents. Add support for tegra_clk_sdmmc*_8 and switch Tegra114 and Tegra124 to use these clocks instead. Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
2014-02-17clk: tegra: fix host1x clock on Tegra124Mark Zhang
The host1x clock on Tegra124 is a 3-bit wide mux with 6 parents. Change thte id to tegra_clk_host1x_8 so that the correct clock gets registered. Signed-off-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
2014-02-17clk: tegra: PLLD2 fixes for hdmiDavid Ung
Set correct pll_d2_out0 divider and correct the p div values for pll_d2. Signed-off-by: David Ung <davidu@nvidia.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 00:51:36 +0000