| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
"Fixes and improvements for FPU handling on x86:
- Prevent sigaltstack out of bounds writes.
The kernel unconditionally writes the FPU state to the alternate
stack without checking whether the stack is large enough to
accomodate it.
Check the alternate stack size before doing so and in case it's too
small force a SIGSEGV instead of silently corrupting user space
data.
- MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never
been updated despite the fact that the FPU state which is stored on
the signal stack has grown over time which causes trouble in the
field when AVX512 is available on a CPU. The kernel does not expose
the minimum requirements for the alternate stack size depending on
the available and enabled CPU features.
ARM already added an aux vector AT_MINSIGSTKSZ for the same reason.
Add it to x86 as well.
- A major cleanup of the x86 FPU code. The recent discoveries of
XSTATE related issues unearthed quite some inconsistencies,
duplicated code and other issues.
The fine granular overhaul addresses this, makes the code more
robust and maintainable, which allows to integrate upcoming XSTATE
related features in sane ways"
* tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
x86/fpu/xstate: Clear xstate header in copy_xstate_to_uabi_buf() again
x86/fpu/signal: Let xrstor handle the features to init
x86/fpu/signal: Handle #PF in the direct restore path
x86/fpu: Return proper error codes from user access functions
x86/fpu/signal: Split out the direct restore code
x86/fpu/signal: Sanitize copy_user_to_fpregs_zeroing()
x86/fpu/signal: Sanitize the xstate check on sigframe
x86/fpu/signal: Remove the legacy alignment check
x86/fpu/signal: Move initial checks into fpu__restore_sig()
x86/fpu: Mark init_fpstate __ro_after_init
x86/pkru: Remove xstate fiddling from write_pkru()
x86/fpu: Don't store PKRU in xstate in fpu_reset_fpstate()
x86/fpu: Remove PKRU handling from switch_fpu_finish()
x86/fpu: Mask PKRU from kernel XRSTOR[S] operations
x86/fpu: Hook up PKRU into ptrace()
x86/fpu: Add PKRU storage outside of task XSAVE buffer
x86/fpu: Dont restore PKRU in fpregs_restore_userspace()
x86/fpu: Rename xfeatures_mask_user() to xfeatures_mask_uabi()
x86/fpu: Move FXSAVE_LEAK quirk info __copy_kernel_to_fpregs()
x86/fpu: Rename __fpregs_load_activate() to fpregs_restore_userregs()
...
|
|
Both function names are a misnomer.
fpu__save() is actually about synchronizing the hardware register state
into the task's memory state so that either coredump or a math exception
handler can inspect the state at the time where the problem happens.
The function guarantees to preserve the register state, while "save" is a
common terminology for saving the current state so it can be modified and
restored later. This is clearly not the case here.
Rename it to fpu_sync_fpstate().
fpu__copy() is used to clone the current task's FPU state when duplicating
task_struct. While the register state is a copy the rest of the FPU state
is not.
Name it accordingly and remove the really pointless @src argument along
with the warning which comes along with it.
Nothing can ever copy the FPU state of a non-current task. It's clearly
just a consequence of arch_dup_task_struct(), but it makes no sense to
proliferate that further.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.196727450@linutronix.de
|
|
A basic IDT setup for the boot CPU has to be done before invoking
cpu_init() because that might trigger #GP when accessing certain MSRs. This
setup cannot install the IST variants on 64-bit because the TSS setup which
is required for ISTs to work happens in cpu_init(). That leaves a
theoretical window where a NMI would invoke the ASM entry point which
relies on IST being enabled on the kernel stack which is undefined
behaviour.
This setup logic has never worked correctly, but on the other hand a NMI
hitting the boot CPU before it has fully set up the IDT would be fatal
anyway. So the small window between the wrong NMI gate and the IST based
NMI gate is not really adding a substantial amount of risk.
But the setup logic is nevertheless more convoluted than necessary. The
recent separation of the TSS setup into a separate function to ensure that
setup so it can setup TSS first, then initialize IDT with the IST variants
before invoking cpu_init() and get rid of the post cpu_init() IST setup.
Move the invocation of cpu_init_exception_handling() ahead of
idt_setup_traps() and merge the IST setup into the default setup table.
Reported-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lai Jiangshan <laijs@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210507114000.569244755@linutronix.de
|
|
SEV-ES guests require properly setup task register with which the TSS
descriptor in the GDT can be located so that the IST-type #VC exception
handler which they need to function properly, can be executed.
This setup needs to happen before attempting to load microcode in
ucode_cpu_init() on secondary CPUs which can cause such #VC exceptions.
Simplify the machinery by running that exception setup from a new function
cpu_init_secondary() and explicitly call cpu_init_exception_handling() for
the boot CPU before cpu_init(). The latter prepares for fixing and
simplifying the exception/IST setup on the boot CPU.
There should be no functional changes resulting from this patch.
[ tglx: Reworked it so cpu_init_exception_handling() stays seperate ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lai Jiangshan <laijs@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/87k0o6gtvu.ffs@nanos.tec.linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Borislav Petkov:
- Turn the stack canary into a normal __percpu variable on 32-bit which
gets rid of the LAZY_GS stuff and a lot of code.
- Add an insn_decode() API which all users of the instruction decoder
should preferrably use. Its goal is to keep the details of the
instruction decoder away from its users and simplify and streamline
how one decodes insns in the kernel. Convert its users to it.
- kprobes improvements and fixes
- Set the maximum DIE per package variable on Hygon
- Rip out the dynamic NOP selection and simplify all the machinery
around selecting NOPs. Use the simplified NOPs in objtool now too.
- Add Xeon Sapphire Rapids to list of CPUs that support PPIN
- Simplify the retpolines by folding the entire thing into an
alternative now that objtool can handle alternatives with stack ops.
Then, have objtool rewrite the call to the retpoline with the
alternative which then will get patched at boot time.
- Document Intel uarch per models in intel-family.h
- Make Sub-NUMA Clustering topology the default and Cluster-on-Die the
exception on Intel.
* tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
x86, sched: Treat Intel SNC topology as default, COD as exception
x86/cpu: Comment Skylake server stepping too
x86/cpu: Resort and comment Intel models
objtool/x86: Rewrite retpoline thunk calls
objtool: Skip magical retpoline .altinstr_replacement
objtool: Cache instruction relocs
objtool: Keep track of retpoline call sites
objtool: Add elf_create_undef_symbol()
objtool: Extract elf_symbol_add()
objtool: Extract elf_strtab_concat()
objtool: Create reloc sections implicitly
objtool: Add elf_create_reloc() helper
objtool: Rework the elf_rebuild_reloc_section() logic
objtool: Fix static_call list generation
objtool: Handle per arch retpoline naming
objtool: Correctly handle retpoline thunk calls
x86/retpoline: Simplify retpolines
x86/alternatives: Optimize optimize_nops()
x86: Add insn_decode_kernel()
x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 bus lock detection updates from Thomas Gleixner:
"Support for enhanced split lock detection:
Newer CPUs provide a second mechanism to detect operations with lock
prefix which go accross a cache line boundary. Such operations have to
take bus lock which causes a system wide performance degradation when
these operations happen frequently.
The new mechanism is not using the #AC exception. It triggers #DB and
is restricted to operations in user space. Kernel side split lock
access can only be detected by the #AC based variant.
Contrary to the #AC based mechanism the #DB based variant triggers
_after_ the instruction was executed. The mechanism is CPUID
enumerated and contrary to the #AC version which is based on the magic
TEST_CTRL_MSR and model/family based enumeration on the way to become
architectural"
* tag 'x86-splitlock-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/admin-guide: Change doc for split_lock_detect parameter
x86/traps: Handle #DB for bus lock
x86/cpufeatures: Enumerate #DB for bus lock detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 cleanups from Borislav Petkov:
"Trivial cleanups and fixes all over the place"
* tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove me from IDE/ATAPI section
x86/pat: Do not compile stubbed functions when X86_PAT is off
x86/asm: Ensure asm/proto.h can be included stand-alone
x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files
x86/msr: Make locally used functions static
x86/cacheinfo: Remove unneeded dead-store initialization
x86/process/64: Move cpu_current_top_of_stack out of TSS
tools/turbostat: Unmark non-kernel-doc comment
x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL()
x86/fpu/math-emu: Fix function cast warning
x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
x86: Fix various typos in comments, take #2
x86: Remove unusual Unicode characters from comments
x86/kaslr: Return boolean values from a function returning bool
x86: Fix various typos in comments
x86/setup: Remove unused RESERVE_BRK_ARRAY()
stacktrace: Move documentation for arch_stack_walk_reliable() to header
x86: Remove duplicate TSC DEADLINE MSR definitions
|
|
Commit
334872a09198 ("x86/traps: Attempt to fixup exceptions in vDSO before signaling")
added return statements which bypass calling cond_local_irq_disable().
According to
ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code"),
cond_local_irq_disable() is needed because the asm return code no longer
disables interrupts. Follow the existing code as an example to use "goto
exit" instead of "return" statement.
[ bp: Massage commit message. ]
Fixes: 334872a09198 ("x86/traps: Attempt to fixup exceptions in vDSO before signaling")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/1617902914-83245-1-git-send-email-thomas.tai@oracle.com
|
|
Add a helper to decode kernel instructions; there's no point in
endlessly repeating those last two arguments.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210326151259.379242587@infradead.org
|
|
Bus locks degrade performance for the whole system, not just for the CPU
that requested the bus lock. Two CPU features "#AC for split lock" and
"#DB for bus lock" provide hooks so that the operating system may choose
one of several mitigation strategies.
#AC for split lock is already implemented. Add code to use the #DB for
bus lock feature to cover additional situations with new options to
mitigate.
split_lock_detect=
#AC for split lock #DB for bus lock
off Do nothing Do nothing
warn Kernel OOPs Warn once per task and
Warn once per task and and continues to run.
disable future checking
When both features are
supported, warn in #AC
fatal Kernel OOPs Send SIGBUS to user.
Send SIGBUS to user
When both features are
supported, fatal in #AC
ratelimit:N Do nothing Limit bus lock rate to
N per second in the
current non-root user.
Default option is "warn".
Hardware only generates #DB for bus lock detect when CPL>0 to avoid
nested #DB from multiple bus locks while the first #DB is being handled.
So no need to handle #DB for bus lock detected in the kernel.
#DB for bus lock is enabled by bus lock detection bit 2 in DEBUGCTL MSR
while #AC for split lock is enabled by split lock detection bit 29 in
TEST_CTRL MSR.
Both breakpoint and bus lock in the same instruction can trigger one #DB.
The bus lock is handled before the breakpoint in the #DB handler.
Delivery of #DB for bus lock in userspace clears DR6[11], which is set by
the #DB handler right after reading DR6.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210322135325.682257-3-fenghua.yu@intel.com
|
|
Use int3 instead of debug trap exception for single-stepping the
probed instructions. Some instructions which change the ip
registers or modify IF flags are emulated because those are not
able to be single-stepped by int3 or may allow the interrupt
while single-stepping.
This actually changes the kprobes behavior.
- kprobes can not probe following instructions; int3, iret,
far jmp/call which get absolute address as immediate,
indirect far jmp/call, indirect near jmp/call with addressing
by memory (register-based indirect jmp/call are OK), and
vmcall/vmlaunch/vmresume/vmxoff.
- If the kprobe post_handler doesn't set before registering,
it may not be called in some case even if you set it afterwards.
(IOW, kprobe booster is enabled at registration, user can not
change it)
But both are rare issue, unsupported instructions will not be
used in the kernel (or rarely used), and post_handlers are
rarely used (I don't see it except for the test code).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/161469874601.49483.11985325887166921076.stgit@devnote2
|
|
Fix ~144 single-word typos in arch/x86/ code comments.
Doing this in a single commit should reduce the churn.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
|
|
Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-15-bp@alien8.de
|
|
Introduce a helper to check whether an exception came from the syscall
gap and use it in the SEV-ES code. Extend the check to also cover the
compatibility SYSCALL entry path.
Fixes: 315562c9af3d5 ("x86/sev-es: Adjust #VC IST Stack on entering NMI handler")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # 5.10+
Link: https://lkml.kernel.org/r/20210303141716.29223-2-joro@8bytes.org
|
|
When a split lock is detected always make sure to disable interrupts
before returning from the trap handler.
The kernel exit code assumes that all exits run with interrupts
disabled, otherwise the SWAPGS sequence can race against interrupts and
cause recursing page faults and later panics.
The problem will only happen on CPUs with split lock disable
functionality, so Icelake Server, Tiger Lake, Snow Ridge, Jacobsville.
Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code")
Fixes: bce9b042ec73 ("x86/traps: Disable interrupts in exc_aligment_check()") # v5.8+
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry/exit updates from Thomas Gleixner:
"A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for
non-x86 specific TIF flags which are solely relevant for syscall
related work and have been moved into their own storage space. The
x86 specific part had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is
going to come seperate via Jens.
- The selective syscall redirection facility which provides a clean
and efficient way to support the non-Linux syscalls of WINE by
catching them at syscall entry and redirecting them to the user
space emulation. This can be utilized for other purposes as well
and has been designed carefully to avoid overhead for the regular
fastpath. This includes the core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the
users of the generic entry code which guarantee the proper ordering
and protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall
restart mechanism"
* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
entry: Add syscall_exit_to_user_mode_work()
entry: Add exit_to_user_mode() wrapper
entry_Add_enter_from_user_mode_wrapper
entry: Rename exit_to_user_mode()
entry: Rename enter_from_user_mode()
docs: Document Syscall User Dispatch
selftests: Add benchmark for syscall user dispatch
selftests: Add kselftest for syscall user dispatch
entry: Support Syscall User Dispatch on common syscall entry
kernel: Implement selective syscall userspace redirection
signal: Expose SYS_USER_DISPATCH si_code type
x86: vdso: Expose sigreturn address on vdso to the kernel
MAINTAINERS: Add entry for common entry code
entry: Fix boot for !CONFIG_GENERIC_ENTRY
x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
sched: Detect call to schedule from critical entry code
context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
x86: Reclaim unused x86 TI flags
...
|
|
vDSO functions can now leverage an exception fixup mechanism similar to
kernel exception fixup. For vDSO exception fixup, the initial user is
Intel's Software Guard Extensions (SGX), which will wrap the low-level
transitions to/from the enclave, i.e. EENTER and ERESUME instructions,
in a vDSO function and leverage fixup to intercept exceptions that would
otherwise generate a signal. This allows the vDSO wrapper to return the
fault information directly to its caller, obviating the need for SGX
applications and libraries to juggle signal handlers.
Attempt to fixup vDSO exceptions immediately prior to populating and
sending signal information. Except for the delivery mechanism, an
exception in a vDSO function should be treated like any other exception
in userspace, e.g. any fault that is successfully handled by the kernel
should not be directly visible to userspace.
Although it's debatable whether or not all exceptions are of interest to
enclaves, defer to the vDSO fixup to decide whether to do fixup or
generate a signal. Future users of vDSO fixup, if there ever are any,
will undoubtedly have different requirements than SGX enclaves, e.g. the
fixup vs. signal logic can be made function specific if/when necessary.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-19-jarkko@kernel.org
|
|
Lockdep state handling on NMI enter and exit is nothing specific to X86. It's
not any different on other architectures. Also the extra state type is not
necessary, irqentry_state_t can carry the necessary information as well.
Move it to common code and extend irqentry_state_t to carry lockdep state.
[ Ira: Make exit_rcu and lockdep a union as they are mutually exclusive
between the IRQ and NMI exceptions, and add kernel documentation for
struct irqentry_state_t ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201102205320.1458656-7-ira.weiny@intel.com
|
|
Commit d53d9bc0cf78 ("x86/debug: Change thread.debugreg6 to
thread.virtual_dr6") changed the semantics of the variable from random
collection of bits, to exactly only those bits that ptrace() needs.
Unfortunately this lost DR_STEP for PTRACE_{BLOCK,SINGLE}STEP.
Furthermore, it turns out that userspace expects DR_STEP to be
unconditionally available, even for manual TF usage outside of
PTRACE_{BLOCK,SINGLE}_STEP.
Fixes: d53d9bc0cf78 ("x86/debug: Change thread.debugreg6 to thread.virtual_dr6")
Reported-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Link: https://lore.kernel.org/r/20201027183330.GM2628@hirez.programming.kicks-ass.net
|
|
The ->virtual_dr6 is the value used by ptrace_{get,set}_debugreg(6). A
kernel #DB clearing it could mean spurious malfunction of ptrace()
expectations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Link: https://lore.kernel.org/r/20201027093608.028952500@infradead.org
|
|
The SDM states that #DB clears DEBUGCTLMSR_BTF, this means that when the
bit is set for userspace (TIF_BLOCKSTEP) and a kernel #DB happens first,
the BTF bit meant for userspace execution is lost.
Have the kernel #DB handler restore the BTF bit when it was requested
for userspace.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Link: https://lore.kernel.org/r/20201027093607.956147736@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV-ES support from Borislav Petkov:
"SEV-ES enhances the current guest memory encryption support called SEV
by also encrypting the guest register state, making the registers
inaccessible to the hypervisor by en-/decrypting them on world
switches. Thus, it adds additional protection to Linux guests against
exfiltration, control flow and rollback attacks.
With SEV-ES, the guest is in full control of what registers the
hypervisor can access. This is provided by a guest-host exchange
mechanism based on a new exception vector called VMM Communication
Exception (#VC), a new instruction called VMGEXIT and a shared
Guest-Host Communication Block which is a decrypted page shared
between the guest and the hypervisor.
Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest
so in order for that exception mechanism to work, the early x86 init
code needed to be made able to handle exceptions, which, in itself,
brings a bunch of very nice cleanups and improvements to the early
boot code like an early page fault handler, allowing for on-demand
building of the identity mapping. With that, !KASLR configurations do
not use the EFI page table anymore but switch to a kernel-controlled
one.
The main part of this series adds the support for that new exchange
mechanism. The goal has been to keep this as much as possibly separate
from the core x86 code by concentrating the machinery in two
SEV-ES-specific files:
arch/x86/kernel/sev-es-shared.c
arch/x86/kernel/sev-es.c
Other interaction with core x86 code has been kept at minimum and
behind static keys to minimize the performance impact on !SEV-ES
setups.
Work by Joerg Roedel and Thomas Lendacky and others"
* tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer
x86/sev-es: Check required CPU features for SEV-ES
x86/efi: Add GHCB mappings when SEV-ES is active
x86/sev-es: Handle NMI State
x86/sev-es: Support CPU offline/online
x86/head/64: Don't call verify_cpu() on starting APs
x86/smpboot: Load TSS and getcpu GDT entry before loading IDT
x86/realmode: Setup AP jump table
x86/realmode: Add SEV-ES specific trampoline entry point
x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES
x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES
x86/sev-es: Handle #DB Events
x86/sev-es: Handle #AC Events
x86/sev-es: Handle VMMCALL Events
x86/sev-es: Handle MWAIT/MWAITX Events
x86/sev-es: Handle MONITOR/MONITORX Events
x86/sev-es: Handle INVD Events
x86/sev-es: Handle RDPMC Events
x86/sev-es: Handle RDTSC(P) Events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the #DE oops message string format which confused tools parsing
crash information (Thomas Gleixner)
- Remove an unused variable in the UV5 code which was triggering a
build warning with clang (Mike Travis)
* tag 'x86_urgent_for_v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Remove unused variable in UV5 NMI handler
x86/traps: Fix #DE Oops message regression
|
|
The conversion of #DE to the idtentry mechanism introduced a change in the
Ooops message which confuses tools which parse crash information in dmesg.
Remove the underscore from 'divide_error' to restore previous behaviour.
Fixes: 9d06c4027f21 ("x86/entry: Convert Divide Error to IDTENTRY")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/CACT4Y+bTZFkuZd7+bPArowOv-7Die+WZpfOWnEO_Wgs3U59+oA@mail.gmail.com
|
|
The #VC handler needs special entry code because:
1. It runs on an IST stack
2. It needs to be able to handle nested #VC exceptions
To make this work, the entry code is implemented to pretend it doesn't
use an IST stack. When entered from user-mode or early SYSCALL entry
path it switches to the task stack. If entered from kernel-mode it tries
to switch back to the previous stack in the IRET frame.
The stack found in the IRET frame is validated first, and if it is not
safe to use it for the #VC handler, the code will switch to a
fall-back stack (the #VC2 IST stack). From there, it can cause nested
exceptions again.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-46-joro@8bytes.org
|
|
The runtime handler needs one GHCB per-CPU. Set them up and map them
unencrypted.
[ bp: Touchups and simplification. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-42-joro@8bytes.org
|
|
Current usage of thread.debugreg6 is convoluted at best. It starts life as
a copy of the hardware DR6 value, but then various bits are cleared and
set.
Replace this with a new variable thread.virtual_dr6 that is initialized to
0 when DR6 is read and only gains bits, at the same time the actual (on
stack) dr6 value which is read from the hardware only gets bits cleared.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.415372940@infradead.org
|
|
DR6 has a whole bunch of bits that have negative polarity; they were
architecturally reserved and defined to be 1 and are now getting used.
Since they're 1 by default, 0 becomes the signal value.
Handle this by xor'ing the read DR6 value by the reserved mask, this
will flip them around such that 1 is the signal value (positive
polarity).
Current Linux doesn't yet support any of these bits, but there's two
defined:
- DR6[11] Bus Lock Debug Exception (ISEr39)
- DR6[16] Restricted Transactional Memory (SDM)
Update ptrace_{set,get}_debugreg() to provide/consume the value in
architectural polarity. Although afaict ptrace_set_debugreg(6) is
pointless, the value is not consumed anywhere.
Change hw_breakpoint_restore() to alway write the DR6_RESERVED value
to DR6, again, no consumer for that write.
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.354220797@infradead.org
|
|
Remove the historical junk and replace it with a WARN and a comment.
The problem is that even though the kernel only uses TF single-step in
kprobes and KGDB, both of which consume the event before this, QEMU/KVM has
bugs in this area that can trigger this state so it has to be dealt with.
Suggested-by: Brian Gerst <brgerst@gmail.com>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.170216274@infradead.org
|
|
The cond_local_irq_enable() block, dealing with vm86 and sending
signals is only relevant for #DB-from-user, move it there.
This then reduces handle_debug() to only the notifier call, so rename
it to notify_debug().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.094265982@infradead.org
|
|
The historical SYSENTER junk is explicitly for from-kernel, so move it
to the #DB-from-kernel handler.
It is ordered after the notifier, which is important for KGDB which uses TF
single-step and needs to consume the event before that point.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.031099736@infradead.org
|
|
There's no point in calculating si_code if it's not going to be used.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133200.967434217@infradead.org
|
|
The handle_debug(.user) argument is used to terminate the #DB handler early
for the INT1-from-kernel case, since the kernel doesn't use INT1.
Remove the argument and handle this explicitly in #DB-from-kernel.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200902133200.907020598@infradead.org
|
|
Kprobes are on kernel text, and thus only matter for #DB-from-kernel.
Kprobes are ordered before the generic notifier, preserve that order.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200902133200.847465360@infradead.org
|
|
Move the BTF sync near the DR6 load, as this will be the only common
code guaranteed to run on every #DB.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200902133200.786888252@infradead.org
|
|
Trying to clear DR7 around a #DB from usermode malfunctions if the tasks
schedules when delivering SIGTRAP.
Rather than trying to define a special no-recursion region, just allow a
single level of recursion. The same mechanism is used for NMI, and it
hasn't caused any problems yet.
Fixes: 9f58fdde95c9 ("x86/db: Split out dr6/7 handling")
Reported-by: Kyle Huey <me@kylehuey.com>
Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/8b9bd05f187231df008d48cf818a6a311cbd5c98.1597882384.git.luto@kernel.org
Link: https://lore.kernel.org/r/20200902133200.726584153@infradead.org
|
|
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Resolve conflicts with ongoing lockdep work that fixed the NMI entry code.
Conflicts:
arch/x86/entry/common.c
arch/x86/include/asm/idtentry.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove the temporary defines and fixup all references.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.855839271@linutronix.de
|
|
Cleanup the temporary defines and use irqentry_ instead of idtentry_.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.602603691@linutronix.de
|
|
While the nmi_enter() users did
trace_hardirqs_{off_prepare,on_finish}() there was no matching
lockdep_hardirqs_*() calls to complete the picture.
Introduce idtentry_{enter,exit}_nmi() to enable proper IRQ state
tracking across the NMIs.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200623083721.216740948@infradead.org
|
|
|
|
exc_alignment_check() fails to disable interrupts before returning to the
entry code.
Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code")
Reported-by: syzbot+0889df9502bc0f112b31@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200708192934.076519438@linutronix.de
|
|
They were originally called _cond_rcu because they were special versions
with conditional RCU handling. Now they're the standard entry and exit
path, so the _cond_rcu part is just confusing. Drop it.
Also change the signature to make them more extensible and more foolproof.
No functional change -- it's pure refactoring.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/247fc67685263e0b673e1d7f808182d28ff80359.1593795633.git.luto@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A series of fixes for x86:
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user
space value.
- Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
whitelisted for split lock detection. Some CPUs which do not
support it crash even when the MSR is written to 0 which is the
default value.
- Fix the XEN PV fallout of the entry code rework
- Fix the 32bit fallout of the entry code rework
- Add more selftests to ensure that these entry problems don't come
back.
- Disable 16 bit segments on XEN PV. It's not supported because XEN
PV does not implement ESPFIX64"
* tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
selftests/x86: Consolidate and fix get/set_eflags() helpers
selftests/x86/syscall_nt: Clear weird flags after each test
selftests/x86/syscall_nt: Add more flag combinations
x86/entry/64/compat: Fix Xen PV SYSENTER frame setup
x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C
x86/entry: Assert that syscalls are on the right stack
x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted
x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
|
|
DEFINE_IDTENTRY_MCE and DEFINE_IDTENTRY_DEBUG were wired up as non-RAW
on x86_32, but the code expected them to be RAW.
Get rid of all the macro indirection for them on 32-bit and just use
DECLARE_IDTENTRY_RAW and DEFINE_IDTENTRY_RAW directly.
Also add a warning to make sure that we only hit the _kernel paths
in kernel mode.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/9e90a7ee8e72fd757db6d92e1e5ff16339c1ecf9.1593795633.git.luto@kernel.org
|
|
On Xen PV, #DB doesn't use IST. It still needs to be correctly routed
depending on whether it came from user or kernel mode.
Get rid of DECLARE/DEFINE_IDTENTRY_XEN -- it was too hard to follow the
logic. Instead, route #DB and NMI through DECLARE/DEFINE_IDTENTRY_RAW on
Xen, and do the right thing for #DB. Also add more warnings to the
exc_debug* handlers to make this type of failure more obvious.
This fixes various forms of corruption that happen when usermode
triggers #DB on Xen PV.
Fixes: 4c0dcd8350a0 ("x86/entry: Implement user mode C entry points for #DB and #MCE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/4163e733cce0b41658e252c6c6b3464f33fdff17.1593795633.git.luto@kernel.org
|
|
Conflicts:
arch/x86/kernel/traps.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
vmlinux.o: warning: objtool: exc_invalid_op()+0x47: call to probe_kernel_read() leaves .noinstr.text section
Since we use UD2 as a short-cut for 'CALL __WARN', treat it as such.
Have the bare exception handler do the report_bug() thing.
Fixes: 15a416e8aaa7 ("x86/entry: Treat BUG/WARN as NMI-like entries")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200622114713.GE577403@hirez.programming.kicks-ass.net
|
|
vmlinux.o: warning: objtool: fixup_bad_iret()+0x8e: call to memcpy() leaves .noinstr.text section
Worse, when KASAN there is no telling what memcpy() actually is. Force
the use of __memcpy() which is our assmebly implementation.
Reported-by: Marco Elver <elver@google.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200618144801.760070502@infradead.org
|
