summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/machine_kexec_64.c
AgeCommit message (Collapse)Author
2021-05-21x86/kexec: Set_[gi]dt() -> native_[gi]dt_invalidate() in machine_kexec_*.cH. Peter Anvin (Intel)
These files contain private set_gdt() functions which are only used to invalid the gdt; machine_kexec_64.c also contains a set_idt() function to invalidate the idt. phys_to_virt(0) *really* doesn't make any sense for creating an invalid GDT. A NULL pointer (virtual 0) makes a lot more sense; although neither will allow any actual memory reference, a NULL pointer stands out more. Replace these calls with native_[gi]dt_invalidate(). Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210519212154.511983-7-hpa@zytor.com
2021-04-28Merge tag 'devicetree-for-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refactor powerpc and arm64 kexec DT handling to common code. This enables IMA on arm64. - Add kbuild support for applying DT overlays at build time. The first user are the DT unittests. - Fix kerneldoc formatting and W=1 warnings in drivers/of/ - Fix handling 64-bit flag on PCI resources - Bump dtschema version required to v2021.2.1 - Enable undocumented compatible checks for dtbs_check. This allows tracking of missing binding schemas. - DT docs improvements. Regroup the DT docs and add the example schema and DT kernel ABI docs to the doc build. - Convert Broadcom Bluetooth and video-mux bindings to schema - Add QCom sm8250 Venus video codec binding schema - Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile Technologies Inc. - Cleanup of DT schema type references on common properties and standard unit properties * tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) powerpc: If kexec_build_elf_info() fails return immediately from elf64_load() powerpc: Free fdt on error in elf64_load() of: overlay: Fix kerneldoc warning in of_overlay_remove() of: linux/of.h: fix kernel-doc warnings of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses dt-bindings: bcm4329-fmac: add optional brcm,ccode-map docs: dt: update writing-schema.rst references dt-bindings: media: venus: Add sm8250 dt schema of: base: Fix spelling issue with function param 'prop' docs: dt: Add DT API documentation of: Add missing 'Return' section in kerneldoc comments of: Fix kerneldoc output formatting docs: dt: Group DT docs into relevant sub-sections docs: dt: Make 'Devicetree' wording more consistent docs: dt: writing-schema: Include the example schema in the doc build docs: dt: writing-schema: Remove spurious indentation dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3 dt-bindings: media: video-interfaces: Drop the example devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt ...
2021-03-18x86: Fix various typos in commentsIngo Molnar
Fix ~144 single-word typos in arch/x86/ code comments. Doing this in a single commit should reduce the churn. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-kernel@vger.kernel.org
2021-03-08x86: Use ELF fields defined in 'struct kimage'Lakshmi Ramasubramanian
ELF related fields elf_headers, elf_headers_sz, and elf_load_addr have been moved from 'struct kimage_arch' to 'struct kimage'. Use the ELF fields defined in 'struct kimage'. Suggested-by: Rob Herring <robh@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210221174930.27324-5-nramas@linux.microsoft.com
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-23x86/crash: Define arch_crash_save_vmcoreinfo() if CONFIG_CRASH_CORE=yOmar Sandoval
On x86 kernels configured with CONFIG_PROC_KCORE=y and CONFIG_KEXEC_CORE=n, the vmcoreinfo note in /proc/kcore is incomplete. Specifically, it is missing arch-specific information like the KASLR offset and whether 5-level page tables are enabled. This breaks applications like drgn [1] and crash [2], which need this information for live debugging via /proc/kcore. This happens because: 1. CONFIG_PROC_KCORE selects CONFIG_CRASH_CORE. 2. kernel/crash_core.c (compiled if CONFIG_CRASH_CORE=y) calls arch_crash_save_vmcoreinfo() to get the arch-specific parts of vmcoreinfo. If it is not defined, then it uses a no-op fallback. 3. x86 defines arch_crash_save_vmcoreinfo() in arch/x86/kernel/machine_kexec_*.c, which is only compiled if CONFIG_KEXEC_CORE=y. Therefore, an x86 kernel with CONFIG_CRASH_CORE=y and CONFIG_KEXEC_CORE=n uses the no-op fallback and gets incomplete vmcoreinfo data. This isn't relevant to kdump, which requires CONFIG_KEXEC_CORE. It only affects applications which read vmcoreinfo at runtime, like the ones mentioned above. Fix it by moving arch_crash_save_vmcoreinfo() into two new arch/x86/kernel/crash_core_*.c files, which are gated behind CONFIG_CRASH_CORE. 1: https://github.com/osandov/drgn/blob/73dd7def1217e24cc83d8ca95c995decbd9ba24c/libdrgn/program.c#L385 2: https://github.com/crash-utility/crash/commit/60a42d709280cdf38ab06327a5b4fa9d9208ef86 Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kairui Song <kasong@redhat.com> Cc: Lianbo Jiang <lijiang@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/0589961254102cca23e3618b96541b89f2b249e2.1576858905.git.osandov@fb.com
2019-11-14x86/kdump: Remove the backup region handlingLianbo Jiang
When the crashkernel kernel command line option is specified, the low 1M memory will always be reserved now. Therefore, it's not necessary to create a backup region anymore and also no need to copy the contents of the first 640k to it. Remove all the code related to handling that backup region. [ bp: Massage commit message. ] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: bhe@redhat.com Cc: Dave Young <dyoung@redhat.com> Cc: d.hatayama@fujitsu.com Cc: dhowells@redhat.com Cc: ebiederm@xmission.com Cc: horms@verge.net.au Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jürgen Gross <jgross@suse.com> Cc: kexec@lists.infradead.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: vgoyal@redhat.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191108090027.11082-3-lijiang@redhat.com
2019-07-09Merge branch 'x86-kdump-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x865 kdump updates from Thomas Gleixner: "Yet more kexec/kdump updates: - Properly support kexec when AMD's memory encryption (SME) is enabled - Pass reserved e820 ranges to the kexec kernel so both PCI and SME can work" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc/vmcore: Enable dumping of encrypted memory when SEV was active x86/kexec: Set the C-bit in the identity map page table when SEV is active x86/kexec: Do not map kexec area as decrypted when SEV is active x86/crash: Add e820 reserved ranges to kdump kernel's e820 table x86/mm: Rework ioremap resource mapping determination x86/e820, ioport: Add a new I/O resource descriptor IORES_DESC_RESERVED x86/mm: Create a workarea in the kernel for SME early encryption x86/mm: Identify the end of the kernel area to be reserved
2019-07-09Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Thomas Gleixner: "Assorted updates to kexec/kdump: - Proper kexec support for 4/5-level paging and jumping from a 5-level to a 4-level paging kernel. - Make the EFI support for kexec/kdump more robust - Enforce that the GDT is properly aligned instead of getting the alignment by chance" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kdump/64: Restrict kdump kernel reservation to <64TB x86/kexec/64: Prevent kexec from 5-level paging to a 4-level only kernel x86/boot: Add xloadflags bits to check for 5-level paging support x86/boot: Make the GDT 8-byte aligned x86/kexec: Add the ACPI NVS region to the ident map x86/boot: Call get_rsdp_addr() after console_init() Revert "x86/boot: Disable RSDP parsing temporarily" x86/boot: Use efi_setup_data for searching RSDP on kexec-ed kernels x86/kexec: Add the EFI system tables and ACPI tables to the ident map
2019-06-20x86/kexec: Set the C-bit in the identity map page table when SEV is activeLianbo Jiang
When SEV is active, the second kernel image is loaded into encrypted memory. For that, make sure that when kexec builds the identity mapping page table, the memory is encrypted (i.e., _PAGE_ENC is set). [ bp: Sort local args and OR in _PAGE_ENC for more clarity. ] Co-developed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: bhe@redhat.com Cc: dyoung@redhat.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: kexec@lists.infradead.org Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190430074421.7852-3-lijiang@redhat.com
2019-06-20x86/kexec: Do not map kexec area as decrypted when SEV is activeLianbo Jiang
When a virtual machine panics, its memory needs to be dumped for analysis. With memory encryption in the picture, special care must be taken when loading a kexec/kdump kernel in a SEV guest. A SEV guest starts and runs fully encrypted. In order to load a kexec kernel and initrd, arch_kexec_post_{alloc,free}_pages() need to not map areas as decrypted unconditionally but differentiate whether the kernel is running as a SEV guest and if so, leave kexec area encrypted. [ bp: Reduce commit message to the relevant information pertaining to this commit only. ] Co-developed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: bhe@redhat.com Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: dyoung@redhat.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: kexec@lists.infradead.org Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190430074421.7852-2-lijiang@redhat.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 230Thomas Gleixner
Based on 2 normalized pattern(s): this source code is licensed under the gnu general public license version 2 see the file copying for more details this source code is licensed under general public license version 2 see extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10x86/kexec: Add the ACPI NVS region to the ident mapKairui Song
With the recent addition of RSDP parsing in the decompression stage, a kexec-ed kernel now needs ACPI tables to be covered by the identity mapping. And in commit 6bbeb276b71f ("x86/kexec: Add the EFI system tables and ACPI tables to the ident map") the ACPI tables memory region was added to the ident map. But some machines have only an ACPI NVS memory region and the ACPI tables are located in that region. In such case, the kexec-ed kernel will still fail when trying to access ACPI tables if they're not mapped. So add the NVS memory region to the ident map as well. [ bp: Massage. ] Fixes: 6bbeb276b71f ("x86/kexec: Add the EFI system tables and ACPI tables to the ident map") Suggested-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chao Fan <fanc.fnst@cn.fujitsu.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: kexec@lists.infradead.org Cc: Lianbo Jiang <lijiang@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190610073617.19767-1-kasong@redhat.com
2019-06-06x86/kexec: Add the EFI system tables and ACPI tables to the ident mapKairui Song
Currently, only the whole physical memory is identity-mapped for the kexec kernel and the regions reserved by firmware are ignored. However, the recent addition of RSDP parsing in the decompression stage and especially: 33f0df8d843d ("x86/boot: Search for RSDP in the EFI tables") which tries to access EFI system tables and to dig out the RDSP address from there, becomes a problem because in certain configurations, they might not be mapped in the kexec'ed kernel's address space. What is more, this problem doesn't appear on all systems because the kexec kernel uses gigabyte pages to build the identity mapping. And the EFI system tables and ACPI tables can, depending on the system configuration, end up being mapped as part of all physical memory, if they share the same 1 GB area with the physical memory. Therefore, make sure they're always mapped. [ bp: productize half-baked patch: - rewrite commit message. - correct the map_acpi_tables() function name in the !ACPI case. ] Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Cc: dyoung@redhat.com Cc: fanc.fnst@cn.fujitsu.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: j-nomura@ce.jp.nec.com Cc: kexec@lists.infradead.org Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Lianbo Jiang <lijiang@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190429002318.GA25400@MiWiFi-R3L-srv
2019-01-11x86/kdump: Export the SME mask to vmcoreinfoLianbo Jiang
On AMD SME machines, makedumpfile tools need to know whether the crashed kernel was encrypted. If SME is enabled in the first kernel, the crashed kernel's page table entries (pgd/pud/pmd/pte) contain the memory encryption mask which makedumpfile needs to remove in order to obtain the true physical address. Export that mask in a vmcoreinfo variable. [ bp: Massage commit message and move define at the end of the function. ] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: anderson@redhat.com Cc: k-hagio@ab.jp.nec.com Cc: kexec@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190110121944.6050-3-lijiang@redhat.com
2018-05-19x86/mm: Stop pretending pgtable_l5_enabled is a variableKirill A. Shutemov
pgtable_l5_enabled is defined using cpu_feature_enabled() but we refer to it as a variable. This is misleading. Make pgtable_l5_enabled() a function. We cannot literally define it as a function due to circular dependencies between header files. Function-alike macros is close enough. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180518103528.59260-4-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-13x86/kexec: Avoid double free_page() upon do_kexec_load() failureTetsuo Handa
>From ff82bedd3e12f0d3353282054ae48c3bd8c72012 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Wed, 9 May 2018 12:12:39 +0900 Subject: [PATCH v3] x86/kexec: avoid double free_page() upon do_kexec_load() failure. syzbot is reporting crashes after memory allocation failure inside do_kexec_load() [1]. This is because free_transition_pgtable() is called by both init_transition_pgtable() and machine_kexec_cleanup() when memory allocation failed inside init_transition_pgtable(). Regarding 32bit code, machine_kexec_free_page_tables() is called by both machine_kexec_alloc_page_tables() and machine_kexec_cleanup() when memory allocation failed inside machine_kexec_alloc_page_tables(). Fix this by leaving the error handling to machine_kexec_cleanup() (and optionally setting NULL after free_page()). [1] https://syzkaller.appspot.com/bug?id=91e52396168cf2bdd572fe1e1bc0bc645c1c6b40 Fixes: f5deb79679af6eb4 ("x86: kexec: Use one page table in x86_64 machine_kexec") Fixes: 92be3d6bdf2cb349 ("kexec/i386: allocate page table pages dynamically") Reported-by: syzbot <syzbot+d96f60296ef613fe1d69@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Baoquan He <bhe@redhat.com> Cc: thomas.lendacky@amd.com Cc: prudo@linux.vnet.ibm.com Cc: Huang Ying <ying.huang@intel.com> Cc: syzkaller-bugs@googlegroups.com Cc: takahiro.akashi@linaro.org Cc: H. Peter Anvin <hpa@zytor.com> Cc: akpm@linux-foundation.org Cc: dyoung@redhat.com Cc: kirill.shutemov@linux.intel.com Link: https://lkml.kernel.org/r/201805091942.DGG12448.tMFVFSJFQOOLHO@I-love.SAKURA.ne.jp
2018-04-13kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory loadPhilipp Rudo
The current code uses the sh_offset field in purgatory_info->sechdrs to store a pointer to the current load address of the section. Depending whether the section will be loaded or not this is either a pointer into purgatory_info->purgatory_buf or kexec_purgatory. This is not only a violation of the ELF standard but also makes the code very hard to understand as you cannot tell if the memory you are using is read-only or not. Remove this misuse and store the offset of the section in pugaroty_info->purgatory_buf in sh_offset. Link: http://lkml.kernel.org/r/20180321112751.22196-10-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations*Philipp Rudo
When the relocations are applied to the purgatory only the section the relocations are applied to is writable. The other sections, i.e. the symtab and .rel/.rela, are in read-only kexec_purgatory. Highlight this by marking the corresponding variables as 'const'. While at it also change the signatures of arch_kexec_apply_relocations* to take section pointers instead of just the index of the relocation section. This removes the second lookup and sanity check of the sections in arch code. Link: http://lkml.kernel.org/r/20180321112751.22196-6-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kexec_file,x86,powerpc: factor out kexec_file_ops functionsAKASHI Takahiro
As arch_kexec_kernel_image_{probe,load}(), arch_kimage_file_post_load_cleanup() and arch_kexec_kernel_verify_sig() are almost duplicated among architectures, they can be commonalized with an architecture-defined kexec_file_ops array. So let's factor them out. Link: http://lkml.kernel.org/r/20180306102303.9063-3-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-02Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: - Extend the memmap= boot parameter syntax to allow the redeclaration and dropping of existing ranges, and to support all e820 range types (Jan H. Schönherr) - Improve the W+X boot time security checks to remove false positive warnings on Xen (Jan Beulich) - Support booting as Xen PVH guest (Juergen Gross) - Improved 5-level paging (LA57) support, in particular it's possible now to have a single kernel image for both 4-level and 5-level hardware (Kirill A. Shutemov) - AMD hardware RAM encryption support (SME/SEV) fixes (Tom Lendacky) - Preparatory commits for hardware-encrypted RAM support on Intel CPUs. (Kirill A. Shutemov) - Improved Intel-MID support (Andy Shevchenko) - Show EFI page tables in page_tables debug files (Andy Lutomirski) - ... plus misc fixes and smaller cleanups * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits) x86/cpu/tme: Fix spelling: "configuation" -> "configuration" x86/boot: Fix SEV boot failure from change to __PHYSICAL_MASK_SHIFT x86/mm: Update comment in detect_tme() regarding x86_phys_bits x86/mm/32: Remove unused node_memmap_size_bytes() & CONFIG_NEED_NODE_MEMMAP_SIZE logic x86/mm: Remove pointless checks in vmalloc_fault x86/platform/intel-mid: Add special handling for ACPI HW reduced platforms ACPI, x86/boot: Introduce the ->reduced_hw_early_init() ACPI callback ACPI, x86/boot: Split out acpi_generic_reduce_hw_init() and export x86/pconfig: Provide defines and helper to run MKTME_KEY_PROG leaf x86/pconfig: Detect PCONFIG targets x86/tme: Detect if TME and MKTME is activated by BIOS x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G x86/boot/compressed/64: Use page table in trampoline memory x86/boot/compressed/64: Use stack from trampoline memory x86/boot/compressed/64: Make sure we have a 32-bit code segment x86/mm: Do not use paravirtualized calls in native_set_p4d() kdump, vmcoreinfo: Export pgtable_l5_enabled value x86/boot/compressed/64: Prepare new top-level page table for trampoline x86/boot/compressed/64: Set up trampoline memory x86/boot/compressed/64: Save and restore trampoline memory ...
2018-04-02Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Ingo Molnar: "The main x86 APIC/IOAPIC changes in this cycle were: - Robustify kexec support to more carefully restore IRQ hardware state before calling into kexec/kdump kernels. (Baoquan He) - Clean up the local APIC code a bit (Dou Liyang) - Remove unused callbacks (David Rientjes)" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Finish removing unused callbacks x86/apic: Drop logical_smp_processor_id() inline x86/apic: Modernize the pending interrupt code x86/apic: Move pending interrupt check code into it's own function x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified x86/apic: Rename variables and functions related to x86_io_apic_ops x86/apic: Remove the (now) unused disable_IO_APIC() function x86/apic: Fix restoring boot IRQ mode in reboot and kexec/kdump x86/apic: Split disable_IO_APIC() into two functions to fix CONFIG_KEXEC_JUMP=y x86/apic: Split out restore_boot_irq_mode() from disable_IO_APIC() x86/apic: Make setup_local_APIC() static x86/apic: Simplify init_bsp_APIC() usage x86/x2apic: Mark set_x2apic_phys_mode() as __init
2018-03-12kdump, vmcoreinfo: Export pgtable_l5_enabled valueBaoquan He
User-space utilities examining crash-kernels need to know if the crashed kernel was in 5-level paging mode or not. So write 'pgtable_l5_enabled' to vmcoreinfo, which covers these three cases: pgtable_l5_enabled == 0 when: - Compiled with !CONFIG_X86_5LEVEL - Compiled with CONFIG_X86_5LEVEL=y while CPU has no 'la57' flag pgtable_l5_enabled != 0 when: - Compiled with CONFIG_X86_5LEVEL=y and CPU has 'la57' flag Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: dyoung@redhat.com Cc: ebiederm@xmission.com Cc: kirill.shutemov@linux.intel.com Cc: vgoyal@redhat.com Link: http://lkml.kernel.org/r/20180302051801.19594-1-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-22x86: Treat R_X86_64_PLT32 as R_X86_64_PC32H.J. Lu
On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared objects must use PIC PLT. To use PIC PLT, you need to load _GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on x86-64 since x86-64 uses PC-relative PLT. On x86-64, for 32-bit PC-relative branches, we can generate PLT32 relocation, instead of PC32 relocation, which can also be used as a marker for 32-bit PC-relative branches. Linker can always reduce PLT32 relocation to PC32 if function is defined locally. Local functions should use PC32 relocation. As far as Linux kernel is concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32 since Linux kernel doesn't use PLT. R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in binutils master branch which will become binutils 2.31. [ hjl is working on having better documentation on this all, but a few more notes from him: "PLT32 relocation is used as marker for PC-relative branches. Because of EBX, it looks odd to generate PLT32 relocation on i386 when EBX doesn't have GOT. As for symbol resolution, PLT32 and PC32 relocations are almost interchangeable. But when linker sees PLT32 relocation against a protected symbol, it can resolved locally at link-time since it is used on a branch instruction. Linker can't do that for PC32 relocation" but for the kernel use, the two are basically the same, and this commit gets things building and working with the current binutils master - Linus ] Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-17x86/apic: Remove the (now) unused disable_IO_APIC() functionBaoquan He
No one uses it anymore. Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-5-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-17x86/apic: Split disable_IO_APIC() into two functions to fix CONFIG_KEXEC_JUMP=yBaoquan He
Split following patches disable_IO_APIC() will be broken up into clear_IO_APIC() and restore_boot_irq_mode(). These two functions will be called separately where they are needed to fix a regression introduced by: 522e66464467 ("x86/apic: Disable I/O APIC before shutdown of the local APIC"). While the CONFIG_KEXEC_JUMP=y code doesn't call lapic_shutdown() before jump like kexec/kdump, so it's not impacted by commit 522e66464467. Hence here change clear_IO_APIC() as public, and replace disable_IO_APIC() with clear_IO_APIC() and restore_boot_irq_mode() to keep CONFIG_KEXEC_JUMP=y code unchanged in essence. No functional change. Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-3-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-30x86/mm, kexec: Fix memory corruption with SME on successive kexecsTom Lendacky
After issuing successive kexecs it was found that the SHA hash failed verification when booting the kexec'd kernel. When SME is enabled, the change from using pages that were marked encrypted to now being marked as not encrypted (through new identify mapped page tables) results in memory corruption if there are any cache entries for the previously encrypted pages. This is because separate cache entries can exist for the same physical location but tagged both with and without the encryption bit. To prevent this, issue a wbinvd if SME is active before copying the pages from the source location to the destination location to clear any possible cache entry conflicts. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <kexec@lists.infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/e7fb8610af3a93e8f8ae6f214cd9249adc0df2b4.1501186516.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18x86/mm, kexec: Allow kexec to be used with SMETom Lendacky
Provide support so that kexec can be used to boot a kernel when SME is enabled. Support is needed to allocate pages for kexec without encryption. This is needed in order to be able to reboot in the kernel in the same manner as originally booted. Additionally, when shutting down all of the CPUs we need to be sure to flush the caches and then halt. This is needed when booting from a state where SME was not active into a state where SME is active (or vice-versa). Without these steps, it is possible for cache lines to exist for the same physical location but tagged both with and without the encryption bit. This can cause random memory corruption when caches are flushed depending on which cacheline is written last. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: <kexec@lists.infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b95ff075db3e7cd545313f2fb609a49619a09625.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-13x86/boot/64: Rename init_level4_pgt and early_level4_pgtKirill A. Shutemov
With CONFIG_X86_5LEVEL=y, level 4 is no longer top level of page tables. Let's give these variable more generic names: init_top_pgt and early_top_pgt. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170606113133.22974-9-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - two boot crash fixes - unwinder fixes - kexec related kernel direct mappings enhancements/fixes - more Clang support quirks - minor cleanups - Documentation fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Fix a typo in Documentation x86/build: Don't add -maccumulate-outgoing-args w/o compiler support x86/boot/32: Fix UP boot on Quark and possibly other platforms x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init() x86/kexec/64: Use gbpages for identity mappings if available x86/mm: Add support for gbpages to kernel_ident_mapping_init() x86/boot: Declare error() as noreturn x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds() x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() x86/microcode/AMD: Remove redundant NULL check on mc
2017-05-08x86: use set_memory.h headerLaura Abbott
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-6-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08x86/kexec/64: Use gbpages for identity mappings if availableXunlei Pang
Kexec sets up all identity mappings before booting into the new kernel, and this will cause extra memory consumption for paging structures which is quite considerable on modern machines with huge memory sizes. E.g. on a 32TB machine that is kdumping, it could waste around 128MB (around 4MB/TB) from the reserved memory after kexec sets all the identity mappings using the current 2MB page. Add to that the memory needed for the loaded kdump kernel, initramfs, etc., and it causes a kexec syscall -NOMEM failure. As a result, we had to enlarge reserved memory via "crashkernel=X" to work around this problem. This causes some trouble for distributions that use policies to evaluate the proper "crashkernel=X" value for users. So enable gbpages for kexec mappings. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: akpm@linux-foundation.org Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1493862171-8799-2-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-08x86/mm: Add support for gbpages to kernel_ident_mapping_init()Xunlei Pang
Kernel identity mappings on x86-64 kernels are created in two ways: by the early x86 boot code, or by kernel_ident_mapping_init(). Native kernels (which is the dominant usecase) use the former, but the kexec and the hibernation code uses kernel_ident_mapping_init(). There's a subtle difference between these two ways of how identity mappings are created, the current kernel_ident_mapping_init() code creates identity mappings always using 2MB page(PMD level) - while the native kernel boot path also utilizes gbpages where available. This difference is suboptimal both for performance and for memory usage: kernel_ident_mapping_init() needs to allocate pages for the page tables when creating the new identity mappings. This patch adds 1GB page(PUD level) support to kernel_ident_mapping_init() to address these concerns. The primary advantage would be better TLB coverage/performance, because we'd utilize 1GB TLBs instead of 2MB ones. It is also useful for machines with large number of memory to save paging structure allocations(around 4MB/TB using 2MB page) when setting identity mappings for all the memory, after using 1GB page it will consume only 8KB/TB. ( Note that this change alone does not activate gbpages in kexec, we are doing that in a separate patch. ) Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: akpm@linux-foundation.org Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1493862171-8799-1-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27x86/kexec: Add 5-level paging supportKirill A. Shutemov
Handle additional page table level in the kexec code. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170317185515.8636-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-10kexec, x86/purgatory: Unbreak it and clean it upThomas Gleixner
The purgatory code defines global variables which are referenced via a symbol lookup in the kexec code (core and arch). A recent commit addressing sparse warnings made these static and thereby broke kexec_file. Why did this happen? Simply because the whole machinery is undocumented and lacks any form of forward declarations. The variable names are unspecific and lack a prefix, so adding forward declarations creates shadow variables in the core code. Aside of that the code relies on magic constants and duplicate struct definitions with no way to ensure that these things stay in sync. The section placement of the purgatory variables happened by chance and not by design. Unbreak kexec and cleanup the mess: - Add proper forward declarations and document the usage - Use common struct definition - Use the proper common defines instead of magic constants - Add a purgatory_ prefix to have a proper name space - Use ARRAY_SIZE() instead of a homebrewn reimplementation - Add proper sections to the purgatory variables [ From Mike ] Fixes: 72042a8c7b01 ("x86/purgatory: Make functions and variables static") Reported-by: Mike Galbraith <<efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Tobin C. Harding" <me@tobin.cc> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-14kexec: export the value of phys_base instead of symbol addressBaoquan He
Currently in x86_64, the symbol address of phys_base is exported to vmcoreinfo. Dave Anderson complained this is really useless for his Crash implementation. Because in user-space utility Crash and Makedumpfile which exported vmcore information is mainly used for, value of phys_base is needed to covert virtual address of exported kernel symbol to physical address. Especially init_level4_pgt, if we want to access and go over the page table to look up a PA corresponding to VA, firstly we need calculate page_dir = SYMBOL(init_level4_pgt) - __START_KERNEL_map + phys_base; Now in Crash and Makedumpfile, we have to analyze the vmcore elf program header to get value of phys_base. As Dave said, it would be preferable if it were readily availabl in vmcoreinfo rather than depending upon the PT_LOAD semantics. Hence in this patch change to export the value of phys_base instead of its virtual address. And people also complained that KERNEL_IMAGE_SIZE exporting is x86_64 only, should be moved into arch dependent function arch_crash_save_vmcoreinfo. Do the moving in this patch. Link: http://lkml.kernel.org/r/1478568596-30060-2-git-send-email-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Baoquan He <bhe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Kees Cook <keescook@chromium.org> Cc: Eugene Surovegin <surovegin@google.com> Cc: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com> Cc: Dave Anderson <anderson@redhat.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Revert "kdump, vmcoreinfo: report memory sections virtual addresses"Baoquan He
This reverts commit 0549a3c02efb ("kdump, vmcoreinfo: report memory sections virtual addresses"). Commit 0549a3c02efb tells the userspace utility makedumpfile the randomized base address of these memmory sections when mm kaslr is enabled. However the following patch "kexec: export the value of phys_base instead of symbol address" makes makedumpfile not need these addresses any more. Besides we should use VMCOREINFO_NUMBER to export the value of the variable so that we can use the existing number_table mechanism of Makedumpfile to fetch it. So revert it now. If needed we can add it later. http://lists.infradead.org/pipermail/kexec/2016-October/017540.html Link: http://lkml.kernel.org/r/1478568596-30060-1-git-send-email-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Baoquan He <bhe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Kees Cook <keescook@chromium.org> Cc: Eugene Surovegin <surovegin@google.com> Cc: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com> Cc: Dave Anderson <anderson@redhat.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11kdump, vmcoreinfo: report memory sections virtual addressesThomas Garnier
KASLR memory randomization can randomize the base of the physical memory mapping (PAGE_OFFSET), vmalloc (VMALLOC_START) and vmemmap (VMEMMAP_START). Adding these variables on VMCOREINFO so tools can easily identify the base of each memory section. Link: http://lkml.kernel.org/r/1471531632-23003-1-git-send-email-thgarnie@google.com Signed-off-by: Thomas Garnier <thgarnie@google.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Kees Cook <keescook@chromium.org> Cc: Eugene Surovegin <surovegin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23kexec: provide arch_kexec_protect(unprotect)_crashkres()Xunlei Pang
Implement the protection method for the crash kernel memory reservation for the 64-bit x86 kdump. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Minfei Huang <mhuang@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20kexec: move some memembers and definitions within the scope of CONFIG_KEXEC_FILEXunlei Pang
Move the stuff currently only used by the kexec file code within CONFIG_KEXEC_FILE (and CONFIG_KEXEC_VERIFY_SIG). Also move internal "struct kexec_sha_region" and "struct kexec_buf" into "kexec_internal.h". Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching fixes from Jiri Kosina: - symbol lookup locking fix, from Miroslav Benes - error handling improvements in case of failure of the module coming notifier, from Minfei Huang - we were too pessimistic when kASLR has been enabled on x86 and were dropping address hints on the floor unnecessarily in such case. Fix from Jiri Kosina - a few other small fixes and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add module locking around kallsyms calls livepatch: annotate klp_init() with __init livepatch: introduce patch/func-walking helpers livepatch: make kobject in klp_object statically allocated livepatch: Prevent patch inconsistencies if the coming module notifier fails livepatch: match return value to function signature x86: kaslr: fix build due to missing ALIGN definition livepatch: x86: make kASLR logic more accurate x86: introduce kaslr_offset()
2015-06-03x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>Stephen Rothwell
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so remove it from there and fix up the resulting build problems triggered on x86 {64|32}-bit {def|allmod|allno}configs. The breakages were triggering in places where x86 builds relied on vmalloc() facilities but did not include <linux/vmalloc.h> explicitly and relied on the implicit inclusion via <asm/io.h>. Also add: - <linux/init.h> to <linux/io.h> - <asm/pgtable_types> to <asm/io.h> ... which were two other implicit header file dependencies. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> [ Tidied up the changelog. ] Acked-by: David Miller <davem@davemloft.net> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Colin Cross <ccross@android.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: James E.J. Bottomley <JBottomley@odin.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Suma Ramars <sramars@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-29x86: introduce kaslr_offset()Jiri Kosina
Offset that has been chosen for kaslr during kernel decompression can be easily computed as a difference between _text and __START_KERNEL. We are already making use of this in dump_kernel_offset() notifier and in arch_crash_save_vmcoreinfo(). Introduce kaslr_offset() that makes this computation instead of hard-coding it, so that other kernel code (such as live patching) can make use of it. Also convert existing users to make use of it. This patch is equivalent transofrmation without any effects on the resulting code: $ diff -u vmlinux.old.asm vmlinux.new.asm --- vmlinux.old.asm 2015-04-28 17:55:19.520983368 +0200 +++ vmlinux.new.asm 2015-04-28 17:55:24.141206072 +0200 @@ -1,5 +1,5 @@ -vmlinux.old: file format elf64-x86-64 +vmlinux.new: file format elf64-x86-64 Disassembly of section .text: $ Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-16x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.hJiang Liu
Clean up code by moving IOAPIC related declarations from hw_irq.h into io_apic.h. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Aubrey <aubrey.li@linux.intel.com> Cc: Ryan Desfosses <ryan@desfo.org> Cc: Quentin Lambert <lambert.quentin@gmail.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: http://lkml.kernel.org/r/1414397531-28254-14-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-08-29kexec: create a new config option CONFIG_KEXEC_FILE for new syscallVivek Goyal
Currently new system call kexec_file_load() and all the associated code compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory code which currently uses gcc option -mcmodel=large. This option seems to be available only gcc 4.4 onwards. Hiding new functionality behind a new config option will not break existing users of old gcc. Those who wish to enable new functionality will require new gcc. Having said that, I am trying to figure out how can I move away from using -mcmodel=large but that can take a while. I think there are other advantages of introducing this new config option. As this option will be enabled only on x86_64, other arches don't have to compile generic kexec code which will never be used. This new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had to do this for CONFIG_KEXEC. Now with introduction of new config option, we can remove crypto dependency from other arches. Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had CONFIG_X86_64 defined, I got rid of that. For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to "depends on CRYPTO=y". This should be safer as "select" is not recursive. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08kexec: verify the signature of signed PE bzImageVivek Goyal
This is the final piece of the puzzle of verifying kernel image signature during kexec_file_load() syscall. This patch calls into PE file routines to verify signature of bzImage. If signature are valid, kexec_file_load() succeeds otherwise it fails. Two new config options have been introduced. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. I tested these patches with both "pesign" and "sbsign" signed bzImages. I used signing_key.priv key and signing_key.x509 cert for signing as generated during kernel build process (if module signing is enabled). Used following method to sign bzImage. pesign ====== - Convert DER format cert to PEM format cert openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform PEM - Generate a .p12 file from existing cert and private key file openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in signing_key.x509.PEM - Import .p12 file into pesign db pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign - Sign bzImage pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign -c "Glacier signing key - Magrathea" -s sbsign ====== sbsign --key signing_key.priv --cert signing_key.x509.PEM --output /boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+ Patch details: Well all the hard work is done in previous patches. Now bzImage loader has just call into that code and verify whether bzImage signature are valid or not. Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Fleming <matt@console-pimps.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08kexec: support for kexec on panic using new system callVivek Goyal
This patch adds support for loading a kexec on panic (kdump) kernel usning new system call. It prepares ELF headers for memory areas to be dumped and for saved cpu registers. Also prepares the memory map for second kernel and limits its boot to reserved areas only. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08kexec-bzImage64: support for loading bzImage using 64bit entryVivek Goyal
This is loader specific code which can load bzImage and set it up for 64bit entry. This does not take care of 32bit entry or real mode entry. 32bit mode entry can be implemented if somebody needs it. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08kexec: load and relocate purgatory at kernel load timeVivek Goyal
Load purgatory code in RAM and relocate it based on the location. Relocation code has been inspired by module relocation code and purgatory relocation code in kexec-tools. Also compute the checksums of loaded kexec segments and store them in purgatory. Arch independent code provides this functionality so that arch dependent bootloaders can make use of it. Helper functions are provided to get/set symbol values in purgatory which are used by bootloaders later to set things like stack and entry point of second kernel etc. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08kexec: implementation of new syscall kexec_file_loadVivek Goyal
Previous patch provided the interface definition and this patch prvides implementation of new syscall. Previously segment list was prepared in user space. Now user space just passes kernel fd, initrd fd and command line and kernel will create a segment list internally. This patch contains generic part of the code. Actual segment preparation and loading is done by arch and image specific loader. Which comes in next patch. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>