summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs/44x/bamboo_defconfig
AgeCommit message (Collapse)Author
2020-06-22powerpc/configs: Remove CMDLINE_BOOLChris Packham
Regenerate defconfigs to remove CONFIG_CMDLINE_BOOL and the default CONFIG_CMDLINE where applicable. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611224220.25066-3-chris.packham@alliedtelesis.co.nz
2019-11-13powerpc/configs: remove obsolete CONFIG_INET_XFRM_MODE_* and ↵YueHaibing
CONFIG_INET6_XFRM_MODE_* These Kconfig options has been removed in commit 4c145dce2601 ("xfrm: make xfrm modes builtin") So there is no point to keep it in defconfigs any longer. Signed-off-by: YueHaibing <yuehaibing@huawei.com> [mpe: Extract from cross arch patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190612071901.21736-1-yuehaibing@huawei.com
2019-07-03powerpc/configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNGMichael Ellerman
Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-08powerpc/configs: Remove old symbols from defconfigsAndrew Donnellan
Update defconfigs to remove old symbols and comments referencing old symbols. Dropped: * AVERAGE * INET_LRO * EXT3_DEFAULTS_TO_ORDERED * EXT3_FS_XATTR * I2O * INFINIBAND_AMSO1100 * INFINIBAND_EHCA * IP1000 Replaced: * BLK_DEV_XIP -> BLK_DEV_RAM_DAX * CLK_PPC_CORENET -> CLK_QORIQ * EXT2_FS_XIP -> FS_DAX * EXT3_FS* -> EXT4_FS* Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20powerpc: Update all configs using savedefconfigMichael Ellerman
It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2011-08-18net: fix IBM EMAC driver after rename.Tony Breeds
In commit 9aa3283595451ca093500ff0977b106e1f465586 (ehea/ibm*: Move the IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC* The conversion was incomplete so that even if the driver was added to the .config it wasn't built, but there were no errors). In this commit we also update the various defconfigs that use EMAC to use the new Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard. We do not explicitly select the Kconfig dependencies, as this would force EMAC on. Doing it in the defconfig allows more flexibility. Tested on a canyondlands board. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15powerpc: Disable CONFIG_SYSFS_DEPRECATEDGrant Likely
Acked-by: Grant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-04powerpc/44x: Update PowerPC 44x board defconfigsJosh Boyer
Update the 44x defconfig files for 2.6.33 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-03powerpc/4xx: Disable PCI_LEGACYJosh Boyer
The single board defconfig files were missed during the cleanup of CONFIG_PCI_LEGACY in the multi-board config files. This disables the option for the single board configs, as it isn't used by anything for these boards. Reported-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-23powerpc/44x: Update PowerPC 44x defconfigsJosh Boyer
Update the 44x defconfigs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-30powerpc/44x: Update 44x defconfigsJosh Boyer
Update the PowerPC 44x defconfigs for 2.6.28 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-06powerpc/4xx: Update defconfig files for 2.6.27-rc1Josh Boyer
Update the defconfig files for 4xx boards. This also makes the mutli-board defconfigs a bit more useful by enabling some of the more common modules. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-15[POWERPC] 4xx: Reorganize 4xx defconfigsJosh Boyer
Board specific defconfigs are useful, however with the ability to do multi-board defconfigs they aren't needed in the top level configs directory. Move the 4xx board specific defconfigs to individual directories under arch/powerpc/configs. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>