summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
AgeCommit message (Collapse)Author
2013-12-30Merge branch 'merge' into nextBenjamin Herrenschmidt
Merge a pile of fixes that went into the "merge" branch (3.13-rc's) such as Anton Little Endian fixes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-20powerpc/512x: dts: disable MPC5125 usb moduleMatteo Facchinetti
At the moment the USB controller's pin muxing is not setup correctly and causes a kernel panic upon system startup, so disable the USB1 device tree node in the MPC5125 tower board dts file. The USB controller is connected to an USB3320 ULPI transceiver and the device tree should receive an update to reflect correct dependencies and required initialization data before the USB1 node can get re-enabled. Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-12-18powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)Gerhard Sittig
the 'soc' node in the MPC5125 "tower" board .dts has an '#interrupt-cells' property although this node is not an interrupt controller remove this erroneously placed property because starting with v3.13-rc1 lookup and resolution of 'interrupts' specs for peripherals gets misled (tries to use the 'soc' as the interrupt parent which fails), emits 'no irq domain found' WARN() messages and breaks the boot process [ best viewed with 'git diff -U5' to have DT node names in the context ] Cc: Anatolij Gustschin <agust@denx.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: devicetree@vger.kernel.org Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-12-07powerpc/512x: dts: remove misplaced IRQ spec from 'soc' nodeGerhard Sittig
the 'soc' node in the common .dtsi for MPC5121 has an '#interrupt-cells' property although this node is not an interrupt controller remove this erroneously placed property because starting with v3.13-rc1 lookup and resolution of 'interrupts' specs for peripherals gets misled, emits 'no irq domain found' WARN() messages and breaks the boot process irq: no irq domain found for /soc@80000000 ! ------------[ cut here ]------------ WARNING: at drivers/of/platform.c:171 Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.13.0-rc1-00001-g8a66234 #8 task: df823bb0 ti: df834000 task.ti: df834000 NIP: c02b5190 LR: c02b5180 CTR: c01cf4e0 REGS: df835c50 TRAP: 0700 Tainted: G W (3.13.0-rc1-00001-g8a66234) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 229a9d42 XER: 20000000 GPR00: c02b5180 df835d00 df823bb0 00000000 00000000 df835b18 ffffffff 00000308 GPR08: c0479cc0 c0480000 c0479cc0 00000308 00000308 00000000 c00040fc 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 df850880 GPR24: df84d670 00000000 00000001 df8561a0 dffffccc df85089c 00000020 00000001 NIP [c02b5190] of_device_alloc+0xf4/0x1a0 LR [c02b5180] of_device_alloc+0xe4/0x1a0 Call Trace: [df835d00] [c02b5180] of_device_alloc+0xe4/0x1a0 (unreliable) [df835d50] [c02b5278] of_platform_device_create_pdata+0x3c/0xc8 [df835d70] [c02b53fc] of_platform_bus_create+0xf8/0x170 [df835dc0] [c02b5448] of_platform_bus_create+0x144/0x170 [df835e10] [c02b55a8] of_platform_bus_probe+0x98/0xe8 [df835e30] [c0437508] mpc512x_init+0x28/0x1c4 [df835e70] [c0435de8] ppc_init+0x4c/0x60 [df835e80] [c0003b28] do_one_initcall+0x150/0x1a4 [df835ef0] [c0432048] kernel_init_freeable+0x114/0x1c0 [df835f30] [c0004114] kernel_init+0x18/0x124 [df835f40] [c000e910] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 409effd4 57c9103a 57de2834 7c89f050 7f83e378 7c972214 7f45d378 48001f55 7c63d278 7c630034 5463d97e 687a0001 <0f1a0000> 2f990000 387b0010 939b0098 ---[ end trace 2257f10e5a20cbdd ]--- ... irq: no irq domain found for /soc@80000000 ! fsl-diu-fb 80002100.display: could not get DIU IRQ fsl-diu-fb: probe of 80002100.display failed with error -22 irq: no irq domain found for /soc@80000000 ! mpc512x_dma 80014000.dma: Error mapping IRQ! mpc512x_dma: probe of 80014000.dma failed with error -22 ... irq: no irq domain found for /soc@80000000 ! fs_enet: probe of 80002800.ethernet failed with error -22 ... irq: no irq domain found for /soc@80000000 ! mpc5121-rtc 80000a00.rtc: mpc5121_rtc_probe: could not request irq: 0 mpc5121-rtc: probe of 80000a00.rtc failed with error -22 ... Cc: Anatolij Gustschin <agust@denx.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: devicetree@vger.kernel.org Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-12-02powerpc/boot: Ignore .dtb files.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-02powerpc/dts/virtex440: Declare address/size-cells for phy deviceIan Campbell
This fixes a warning: DTC arch/powerpc/boot/virtex440-ml507.dtb Warning (reg_format): "reg" property in /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7 Warning (avoid_default_addr_size): Relying on default #size-cells value for /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7 Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Gernot Vormayr <gvormayr@gmail.com> Cc: devicetree@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-02powerpc/4xx: Fix warning in kilauea.dtbIan Campbell
Currently I see: DTC arch/powerpc/boot/kilauea.dtb Warning (reg_format): "reg" property in /plb/ppc4xx-msi@C10000000 has invalid length (12 bytes) (#address-cells == 1, #size-cells == 1) It appears that unlike the other platforms handled by 3fb7933850fa "powerpc/4xx: Adding PCIe MSI support" this platform does not use address-cells=2. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Josh Boyer <jwboyer@gmail.com> Cc: Rupjyoti Sarmah <rsarmah@apm.com> Cc: Tirumala R Marri <tmarri@apm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND...) Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-22powerpc/85xx: typo in dts: "interupt" (four devices)Adam Borowski
These lines were inoperative for four years, which puts some doubt into their importance, and it's possible the fixed version will regress, but at the very least they should be removed instead. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-22powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supportedLEROY Christophe
Commit beb2dc0a7a84be003ce54e98b95d65cc66e6e536 breaks the MPC8xx which seems to not support using mfspr SPRN_TBRx instead of mftb/mftbu despite what is written in the reference manual. This patch reverts to the use of mftb/mftbu when CONFIG_8xx is selected. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-20Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-13DMA: Freescale: Add new 8-channel DMA engine device tree nodesHongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds the device tree nodes for them. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-05powerpc/boot: Properly handle the base "of" boot wrapperBenjamin Herrenschmidt
The wrapper script needs an explicit rule for the "of" boot wrapper (generic wrapper, similar to pseries). Before 0c9fa29149d3726e14262aeb0c8461a948cc9d56 it was hanlded implicitly by the statement: platformo=$object/"$platform".o But now that epapr.o needs to be added, that doesn't work and an explicit rule must be added. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/boot: Don't change link address for OF-based platformsPaul Mackerras
Commit c55aef0e5bc6 ("powerpc/boot: Change the load address for the wrapper to fit the kernel") adjusts the wrapper address unnecessarily for platforms that use arch/powerpc/boot/of.c, since the code there allocates space for the kernel wherever it can find it and doesn't necessarily load the kernel at address 0. Changing the link address is actually harmful since it can cause the zImage to overlap with Open Firmware and thus fail to boot. To fix this, we set make_space to n for all of the platforms that use of.o. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-28powerpc/dts/c293pcie: Add range field for IFC NANDPrabhakar Kushwaha
C290PCIe has NAND flash present on IFC Chip Select(CS) 1. So Add "ranges" field for NAND flash on CS1. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/b4860emu: Add device tree file for b4860emuYork Sun
B4860EMU is a emualtor target with minimum peripherals. It is based on B4860QDS and trimmed down most peripherals due to either not modeled or lack of board level connections. The main purpose of this minimum dts is to speed up booting on emulator. Signed-off-by: York Sun <yorksun@freescale.com> [scottwood@freescale.com: whitespace fix] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/t4240emu: Add device tree file for t4240emuYork Sun
T4240EMU is an emulator target with minimum peripherals. It is based on T4240QDS and trimmed down most peripherals due to either not modeled or lack of board level connections. The main purpose of this minimum dts is to speed up booting on emulator. Signed-off-by: York Sun <yorksun@freescale.com> [scottwood@freescale.com: whitespace fixes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc: Add I2C bus multiplexer node for B4 and T4240QDSHongtao Jia
In both B4 and T4240QDS platform PCA9547 I2C bus multiplexer is used. The sub-nodes are also reorganized according to right I2C topology. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/dts: Correct sdhci quirk for bsc9131Haijun.Zhang
We use property "sdhci,auto-cmd12" instead of "fsl,sdhci-auto-cmd12" to distinguish if the sdhc host has quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/eSDCH: Specify voltage for T4240QDSHaijun.Zhang
Freescale T4240QDS reference board has extra voltage shifters added to allow 3.3V operation, so add 3.3v voltage support for T4240QDS. 1.8v and 3.3v is recommand for eMMC and SDHC card. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/e500v2: Include Power ISA propertiesLijun Pan
bsc9131 device tree does not have these properties. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/e6500: Include Power ISA propertiesLijun Pan
b4420 and b4860 device trees do not have these properties. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/dts: fix sRIO error interrupt for b4860Minghuan Lian
For B4 platform, MPIC EISR register is in reversed bitmap order, instead of "Error interrupt source 0-31. Bit 0 represents SRC0." the correct ordering is "Error interrupt source 0-31. Bit 0 represents SRC31." This patch is to fix sRIO EISR bit value of error interrupt in dts node. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-11powerpc: Add ability to build little endian kernelsIan Munsie
This patch allows the kbuild system to successfully compile a kernel for the little endian PowerPC64 architecture. A subsequent patch will add the CONFIG_CPU_LITTLE_ENDIAN kernel config option which must be set to build such a kernel. If cross compiling, CROSS_COMPILE must point to a suitable toolchain (compiled for the powerpc64le-linux and powerpcle-linux targets). Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-25powerpc/zImage: make the "OF" wrapper support ePAPR bootBenjamin Herrenschmidt
This makes the "OF" zImage wrapper (zImage.pseries, zImage.pmac, zImage.maple) work if booted via a flat device-tree (ePAPR boot mode), and thus potentially usable with kexec. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-05Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt
From Anatolij: << There are cleanups for some mpc5121 specific drivers and DTS files in preparation to switch mpc5121 clock support to a clock driver based on common clock framework. Additionally Sebastian fixed the mpc52xx PIC driver so that it builds when using older gcc versions. >>
2013-08-23powerpc/85xx: Add C293PCIE board supportMingkai Hu
C293PCIE board is a series of Freescale PCIe add-in cards to perform as public key crypto accelerator or secure key management module. - 512KB platform SRAM in addition to 512K L2 Cache/SRAM - 512MB soldered DDR3 32bit memory - CPLD System Logic - 64MB x16 NOR flash and 4GB x8 NAND flash - 16MB SPI flash Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23powerpc/85xx: Add silicon device tree for C293Mingkai Hu
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23powerpc/85xx: Add SEC6.0 device treeMingkai Hu
Add device tree for SEC 6.0 used on C29x silicon. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23powerpc/85xx: Add P1023RDB board supportChunhe Lan
P1023RDB Specification: ----------------------- Memory subsystem: 512MB DDR3 (Fixed DDR on board) 64MB NOR flash 128MB NAND flash Ethernet: eTSEC1: Connected to Atheros AR8035 GETH PHY eTSEC2: Connected to Atheros AR8035 GETH PHY PCIe: Three mini-PCIe slots USB: Two USB2.0 Type A ports I2C: AT24C08 8K Board EEPROM (8 bit address) Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-24dts: mpc512x: prepare for preprocessor supportGerhard Sittig
prepare C preprocessor support when processing MPC512x DTS files - switch from DTS syntax to CPP syntax for include specs - create a symlink such that DTS processing can reference includes Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-08-20powerpc: Convert some mftb/mftbu into mfsprScott Wood
Some CPUs (such as e500v1/v2) don't implement mftb and will take a trap. mfspr should work on everything that has a timebase, and is the preferred instruction according to ISA v2.06. Currently we get away with mftb on 85xx because the assembler converts it to mfspr due to -Wa,-me500. However, that flag has other effects that are undesireable for certain targets (e.g. lwsync is converted to sync), and is hostile to multiplatform kernels. Thus we would like to stop setting it for all e500-family builds. mftb/mftbu instances which are in 85xx code or common code are converted. Instances which will never run on 85xx are left alone. Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-14powerpc: Ignore zImage.epaprMark Brown
This is another file we can generate so add it to the list. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-07powerpc/85xx: add the P1020RDB-PD DTS supportHaijun.Zhang
Overview of P1020RDB-PD device: - DDR3 2GB - NOR flash 64MB - NAND flash 128MB - SPI flash 16MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 1 USB ports - TDM ports - PCIe Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Xie Xiaobo-R63061 <X.Xie@freescale.com> CC: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07powerpc/dts: add MPIC v4.3 dts nodeMinghuan Lian
For the latest platform T4 and B4, MPIC controller has been updated to v4.3. This patch adds a new file to describe the latest MPIC. The MSI blocks number is increased to four, the registers number of each block is increased to sixteen. MSIIR1 has been added to access these sixteen MSI registers. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07powerpc/fsl-booke: Rename b4qds.dts -> b4qds.dtsi.Ian Campbell
This file is a common include for B4860 and B4420 but is not a valid DTS itself: DTC arch/powerpc/boot/b4qds.dtb Error: arch/powerpc/boot/dts/b4qds.dts:35.1-2 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [arch/powerpc/boot/b4qds.dtb] Error 1 make: *** [b4qds.dtb] Error 2 I spotted in build tests of device-tree.git, announcement https://lkml.org/lkml/2013/4/24/209, which builds *.dts. Probably no one would do this this in real life on linux.git but it still seems worth fixing. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Shaveta Leekha <shaveta@freescale.com> Cc: Minghuan Lian <Minghuan.Lian@freescale.com> Cc: Andy Fleming <afleming@freescale.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Ramneek Mehresh <ramneek.mehresh@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-24powerpc: Add T4 LAC device tree binding & defsJoe Liccese
The Interlaken is a narrow, high speed channelized chip-to-chip interface. To facilitate interoperability between a data path device and a look-aside co-processor, the Interlaken Look-Aside protocol is defined for short transaction-related transfers. Although based on the Interlaken protocol, Interlaken Look-Aside is not directly compatible with Interlaken and can be considered a different operation mode. The Interlaken LA controller connects internal platform to Interlaken serial interface. It accepts LA command through software portals, which are system memory mapped 4KB spaces. The LA commands are then translated into the Interlaken control words and data words, which are sent on TX side to TCAM through SerDes lanes. Signed-off-by: Joe Liccese <joe.liccese@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-20powerpc: Update currituck pci/usb fixup for new board revisionAlistair Popple
The currituck board uses a different IRQ for the pci usb host controller depending on the board revision. This patch adds support for newer board revisions by retrieving the board revision from the FPGA and mapping the appropriate IRQ. Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-04Merge tag 'mmc-updates-for-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
2013-04-30Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt
From Kumar Gala: << Add support for T4 and B4 SoC families from Freescale, e6500 altivec support, some various board fixes and other minor cleanups. >>
2013-04-29powerpc/fsl-booke: add the reg prop for pci bridge device node for T4/B4Kevin Hao
The reg property in the pci bridge device node is used to bind this device node to the pci bridge device. Then all the pci devices under this bridge could use the interrupt maps defined in this device node to do the irq translation. So if this property is missed, the pci traditional irq mechanism will not work. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-29powerpc/dts: Fix the dts for p1025rdb 36bitZhicheng Fan
Fix the following errors: Error: p1025rdb.dtsi:326.2-3 label or path, 'qe', not found Error: p1021si-post.dtsi:242.2-3 label or path, 'qe', not found FATAL ERROR: Syntax error parsing input tree Signed-off-by: Zhicheng Fan <B32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-12mmc: mxcmmc: enable DMA support on mpc512xAnatolij Gustschin
Add SDHC DMA channel description to the mpc512x device tree to enable slave channel requesting in the mxcmmc driver. mpc512x DMA engine doesn't support endianness conversion when reading/writing data from peripheral's FIFO, so we have to swap data buffers before each DMA write and after each DMA read transfer manually. Since chained SDHC DMA transfers are not supported on mpc512x, limit 'max_segs' tunable parameter to one and initialise it to 64 only when running on i.MX platforms. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-11powerpc/85xx: Fix MPC8536DS 36-bit device treeKumar Gala
The localbus node should be in at 0xfffe05000 not 0xffe05000. Also fixed the names of the localbus and pci nodes to reflect the addresses they are actually at. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11powerpc/fsl: Add property for 'era' in SEC dts crypto nodeVakul Garg
The crypto node now contains a new property 'fsl,sec-era'. This is required so that applications can retrieve era info without having to be able to read SEC's register space. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11powerpc/fsl: removed qoriq-sec4.1-0.dtsi.Vakul Garg
Removing qoriq-sec4.1-0.dtsi as it is not used by any soc anymore. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/512x: add ifm ac14xx boardAnatolij Gustschin
Add dts file for ac14xx board and its board compatible string to the generic mpc512x board match list. Also add phandle to the dma DT node since there is a change (for MPC5121 SDHC DMA support) merged via linux-mmc tree with reference to the dma controller node in the sdhc node. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-04-10powerpc/mpc512x: add platform code for MPC5125.Matteo Facchinetti
Tested on MPC5125 Tower evaluation board with mpc512x_defconfig compile configuration. In detail, supports for: - PSC / UART - RTC - ETH - DIU - I2C Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-04-10powerpc/fsl-booke: Add initial B4860QDS and B4420QDS board device treeShaveta Leekha
B4860QDS and B4420QDS share same QDS board * common board features have been added in b4qds.dts * various board differences are in respective files of B4860 and B4420 Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-booke: Add initial silicon device tree files for B4860 and B4420Shaveta Leekha
B4860 and B4420 are similar that share some commonalities * common features have been added in b4si-pre.dtsi and b4si-post.dtsi * differences are added in respective silicon files of B4860 and B4420 There are several things missing from the device trees of B4860 and B4420: * DPAA related nodes (Qman, Bman, Fman, Rman) * DSP related nodes/information * serdes, sfp(security fuse processor), thermal, gpio, maple, cpri, quad timers nodes Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-09powerpc/fsl-booke: Minor fixes to T4240 Si device treeKumar Gala
* Fix cpu unit address to match reg * Update compatible for rcpm & clockgen to be 2.0 instead of 2 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 02:03:43 +0000