summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic/Makefile
AgeCommit message (Collapse)Author
2021-05-28arm64: dts: meson-sm1: add Banana PI BPI-M5 board dtsNeil Armstrong
Banana Pi BPI-M5 is a credit card format SBC with the following features: - Amlogic S905X3 quad core Cortex-A55 - Mali-G31 GPU - 4GB LPDDR4 - 16GB eMMC flash - 4 USB 3.0 - 1 GbE ethernet - HDMI output - 2x LEDS - SDCard - 2.5mm Jack with Stereo Audio + CVBS - Infrared Received - ADC Button - GPIO Button - 40 pins header + 3pins debug header Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210514143255.3352774-4-narmstrong@baylibre.com
2021-04-05arm64: dts: meson: add initial device-tree for MeCool KIII ProChristian Hewitt
MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference board with an S912 chip and the following specs: - 3GB DDR3 RAM - 16GB eMMC - 10/100/1000 Base-T Ethernet - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) - DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner) - HDMI 2.0a video - S/PDIF optical output - CVBS/Analogue output - 4x USB 2.0 ports - IR receiver - 1x Power button (with integrated blue LED) - 1x Update/Reset button (underside) - 1x micro SD card slot Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210402064521.30579-4-christianshewitt@gmail.com
2021-04-05arm64: dts: meson: add initial device-tree for MeCool KII ProChristian Hewitt
MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference board with an S905D chip and the following specs: - 2GB DDR3 RAM - 16GB eMMC - 10/100 Base-T Ethernet - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) - DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner) - HDMI 2.0a video - S/PDIF optical output - CVBS/Analogue output - 4x USB 2.0 ports - IR receiver - 1x Power button (with integrated blue LED) - 1x micro SD card slot Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210402064521.30579-3-christianshewitt@gmail.com
2021-03-08arm64: dts: meson: add initial device-tree for Minix NEO U9-HChristian Hewitt
Minix NEO U9-H is based on the Amlogic Q200 reference board with an S912-H chip and the following specs: - 2GB DDR3 RAM - 16GB eMMC - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - RTC chip - HDMI 2.1 video - S/PDIF optical output - ES8323 audio codec - Analogue headphone output - 3x USB 2.0 ports (1x OTG) - IR receiver - 1x Power LED (white) - 1x Power button (rear) - 1x Update/Reset button (underside) - 1x micro SD card slot Tested-by: Wes Bradley <komplex@live.ie> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210201210508.1528-2-christianshewitt@gmail.com
2021-02-08arm64: dts: meson: add initial device-tree for ODROID-HC4Christian Hewitt
ODROID-HC4 is a derivative of the C4 with minor differences: - 16MB XT25F128B SPI-NOR flash - 2x SATA ports via ASM1061 PCIe to SATA controller - 7-pin header with SPI and I2C for 1-inch OLED display and RTC - 1x USB 2.0 host port Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210202021021.11068-6-christianshewitt@gmail.com
2021-02-03arm64: dts: meson: sort Amlogic dtb MakefileChristian Hewitt
Sort the Makefile before adding new SM1 devices. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210202021021.11068-3-christianshewitt@gmail.com
2021-02-03arm64: dts: meson: add initial Beelink GS-King-X device-treeChristian Hewitt
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip. - 4GB LPDDR4 RAM - 64GB eMMC storage - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - HDMI 2.1 video - S/PDIF optical output - 2x ESS9018 audio DACs - 4x Ricor RT6862 audio amps - Analogue headphone output - 1x USB 2.0 OTG port - 3x USB 3.0 ports - IR receiver - 1x micro SD card slot (internal) - USB SATA controller with 2x 3.5" drive bays - 1x Power on/off button Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210119145734.12675-3-christianshewitt@gmail.com
2020-09-18arm64: dts: meson: initial support for aml-s905x-cc v2Jerome Brunet
Add initial support for the libretech aml-s905x-cc (Le Potato) v2 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200915141921.57258-3-jbrunet@baylibre.com
2020-09-18arm64: dts: meson: add support for the ODROID-N2+Christian Hewitt
HardKernel ODROID-N2+ uses an Amlogic S922X rev. C chip capable of higher clock speeds than the original ODROID-N2. The rev. C support a slighly higher VDDCPU_A & VDDCPU_B voltages and supports the same OPPs as the Amlogic A311D SoC from the same G12B family. Suggested-by: Dongjin Kim <tobetter@hardkernel.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200915152432.30616-4-narmstrong@baylibre.com
2020-07-21arm64: dts: meson: add support for the WeTek Core 2Christian Hewitt
The WeTek Core2 is a commercial device based on the Amlogic Q200 reference design but with the following differences: - 3GB RAM, 32GB eMMC - Blue and Red LEDs used to signal on/off status - uart_AO can be accessed after opening the case; soldering required - USB OTG is not accessible (inside the case) - Realtek RTL8152 Ethernet (internal USB connection) Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200719021421.7959-3-christianshewitt@gmail.com
2020-05-20arm64: dts: meson-g12b-gtking-pro: add initial device-treeChristian Hewitt
The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference board with an S922X chip. - 4GB LPDDR4 RAM - 64GB eMMC storage - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - HDMI 2.1 video - Analogue audio output - 1x RS232 port - 2x USB 2.0 port - 2x USB 3.0 ports - IR receiver - 1x micro SD card slot - 1x Power on/off button Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200520014329.12469-6-christianshewitt@gmail.com
2020-05-20arm64: dts: meson-g12b-gtking: add initial device-treeChristian Hewitt
The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference board with an S922X chip. - 4GB LPDDR4 RAM - 64GB eMMC storage - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - HDMI 2.1 video - S/PDIF optical output - Analogue audio output - 1x USB 2.0 port - 2x USB 3.0 ports - IR receiver - 1x micro SD card slot Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200520014329.12469-4-christianshewitt@gmail.com
2020-05-19arm64: dts: meson: add support for the Smartlabs SML-5442TWChristian Hewitt
The Smartlabs SML-5442TW is based on the Amlogic P231 reference design but with the following differences: - The Yellow and Blue LEDs are available but disabled - The Red and Green LEDs are used to signal off/on status - uart_AO can be accessed after opening the case; soldered pins exist - QCA9377 instead of the usual Ampak/Broadcom module Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200510124129.31575-4-christianshewitt@gmail.com
2020-05-19arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4Dongjin Kim
Add the board support for the Hardkernel Odroid-C4 single board computer. The Odroid-C4 is the Odroid-C2 successor with same form factor, but using a modern Amlogic S905X3 (SM1) SoC and 4x USB3 ports. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506080702.6645-3-narmstrong@baylibre.com
2019-12-16arm64: dts: meson: add libretech-pc boards supportJerome Brunet
Add support for the the amlogic libretech-pc platform, aka tartiflette. There is 2 variants of the platform, one with the s905d, the other with the s912. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-12-09arm64: dts: meson-gxbb: add support for Videostrong KII ProMohammad Rasim
This patch adds support for the Videostrong KII Pro tv box which is based on the gxbb-p201 reference design Device specifications: - SOC: Amlogic S905 - RAM: 2GB DDR3 - Storage: 16GB - Connectivity: - 10/100M Ethernet (IC Plus IP101GR) - 802.11 b/g/n/ac Wi-Fi (Ampak AP6335 BT/WIFI combo) - Bluetooth 4.0 (Ampak AP6335 BT/WIFI combo) - Video out: HDMI 2.0 up to 4K @ 60Hz, and 3.5mm AV (composite video) jack - Audio out: HDMI, AV (stereo audio) and optical S/PDIF - Tuner: AVL6862 DVB-C/T/T2 + DVB-S/S2 demod and Rafael Micro R848 tuner - Ports: - x1 micro SD card slot up to 32GB - 4x USB 2.0 host ports - Misc: - Power button and LED, IR receiver Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson-g12b-ugoos-am6: add initial device-treeChristian Hewitt
The Ugoos AM6 is based on the Amlogic W400 (G12B) reference design using the S922X chipset. Hardware specifications: - 2GB LPDDR4 RAM - 16GB eMMC storage - 10/100/1000 Base-T Ethernet using External RGMII PHY - 802.11 a/b/g/b/ac + BT 5.0 sdio wireless (Ampak 6398S) - HDMI 2.0 (4k@60p) video - Composite video + 2-channel audio output on 3.5mm jack - S/PDIF audio output - Aux input - 1x USB 3.0 - 3x USB 2.0 - 1x micro SD card slot The device-tree is largely based on meson-g12b-odroid-n2 but with audio and USB config copied from meson-g12a-x96-max. Tested-by: Oleg Ivanov <balbes-150@yandex.ru> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: add support for A1 based Amlogic AD401Jianxin Pan
Add basic support for the Amlogic A1 based Amlogic AD401 board: which describe components as follows: Reserve Memory, CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: khadas-vim3: add support for the SM1 based VIM3LNeil Armstrong
Add the Amlogic SM1 based Khadas VIM3L, sharing all the same features as the G12B based VIM3, but: - a different DVFS support since only a single cluster is available - audio is still not available on SM1 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-20arm64: dts: add support for SM1 based SEI Robotics SEI610Neil Armstrong
Add support for the Amlogic SM1 Based SEI610 board. The SM1 SoC is a derivative of the G12A SoC Family with : - Cortex-A55 core instead of A53 - more power domains, including USB & PCIe - a neural network co-processor (NNA) - a CSI input and image processor - some changes in the audio complex, thus not yet enabled The SEI610 board is a derivative of the SEI510 board with : - removed ADC based touch button, replaced with 3x GPIO buttons - physical switch disabling on-board MICs - USB-C port for USB 2.0 OTG - On-board FTDI USB2SERIAL port for Linux console Audio, Display and USB support will be added later when support of the corresponding power domains will be added, for now they are kept disabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [khilman: fix minor typo regultor -> regulator] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-12arm64: dts: meson-g12b-khadas-vim3: add initial device-treeChristian Hewitt
The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the Amlogic G12B SoC family, on a board with the same form factor as the VIM/VIM2 models. It ships in two variants; basic and pro which differ in RAM and eMMC size: - 2GB (basic) or 4GB (pro) LPDDR4 RAM - 16GB (basic) or 32GB (pro) eMMC 5.1 storage - 16MB SPI flash - 10/100/1000 Base-T Ethernet - AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0) - HDMI 2.1 video - 1x USB 2.0 + 1x USB 3.0 ports - 1x USB-C (power) with USB 2.0 OTG - 3x LED's (1x red, 1x blue, 1x white) - 3x buttons (power, function, reset) - IR receiver - M2 socket with PCIe, USB, ADC & I2C - 40pin GPIO Header - 1x micro SD card slot A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and A311D SoCs supported by two variants of the board. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11arm64: dts: meson: Add minimal support for Odroid-N2Neil Armstrong
This patch adds basic support for : - Amlogic G12B, which is very similar to G12A - The HardKernel Odroid-N2 based on the S922X SoC The Amlogic G12B SoC is very similar with the G12A SoC, sharing most of the features and architecture, but with these differences : - The first CPU cluster only has 2xCortex-A53 instead of 4 - G12B has a second cluster of 4xCortex-A73 - Both cluster can achieve 2GHz instead of 1,8GHz for G12A - CPU Clock architecture is difference, thus needing a different compatible to handle this slight difference - Supports a MIPI CSI input - Embeds a Mali-G52 instead of a Mali-G31, but integration is the same Actual support is done in the same way as for the GXM support, including the G12A dtsi and redefining the CPU clusters. Unlike GXM, the first cluster is different, thus needing to remove the last 2 cpu nodes of the first cluster. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> [khilman: add vin-supply for vcc_v5 as suggested by Anand Moon] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-03-18arm64: dts: Add SEI Robotics SEI510 BoardNeil Armstrong
The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2 and has the following features : - Amlogic G12A S905X2 SoC - 10/100 Ethernet - USB2 + USB3 ports - Micro SDCard Port - Audio + CVBS AV Jack port - HDMI 2.1 + CEC Port - ADC Touch Button - Far-Field Microphone Array + Mono HP - IR Sensor - IR Emmiter LED Array - RGB Led Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: sorted Makefile entry alphabetcially] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-02-08arm64: dts: meson: add g12a x96 max boardKevin Hilman
Add the G12a (S905X2) based X96 Max board[1]. There is no branding for the manufacturer anywhere on the product, so it took some digging[2] to find the manufacturer. But since there's nothing about the maker on the product I've left it out of the DT name because 1) nobody will know that name and 2) keeps the DT filename shorter. [1] https://www.cnx-software.com/2018/09/25/x96-max-amlogic-s905x2-tv-box/ [2] https://fccid.io/2AI6D-X96MAX Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: add libretech aml-s805x-ac boardNeil Armstrong
Add Libretech aml-s805x-ac board (aka 'La Frite') support Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-gxl: add support for phicomm n1He Yangxuan
This patch adds support for the Phicomm N1. This device based on P230 reference design. And this box doesn't have cvbs, so disable related section in device tree. Signed-off-by: He Yangxuan <yangxuan8282@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-26arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT supportJianxin Pan
Try to add basic DT support for the Amlogic's Meson-G12A S905D2 SoC, which describe components as follows: Reserve Memory, CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 MiniMartin Blumenstingl
The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. There are two variants: - 1 GiB or 2 GiB of DDR3 memory - 8 GB or 16 GB eMMC flash Both variants come with: - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not support Bluetooth) - an LED 7 segment display with an FD628 controller - HDMI and AV (CVBS) output - 2x USB (utilizing both USB ports provided by the SoC) - micro SD card slot - serial console (uart_AO) has to be soldered after opening the case The board seems to be very similar to the P23x and Q20x reference boards, which is why it includes meson-gx-p23x-q20x.dtsi: - eMMC reset routed to BOOT_9 - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference clock is 32.768KHz on PWM_E - SD card detection is routed to CARD_6 - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT) - uart_AO can be accessed after opening the case and soldering RX, TX and GND lines onto the exposed solder points (marked with RX, TX and GND) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 boardMartin Blumenstingl
S905W is a new SoC from the GXL series. It is a cost-reduced version of the S905X. The P281 development board from Amlogic uses the same layout as the P231 (S905D development board). Thus the new P281 board inherits meson-gx-p23x-q20x.dtsi to avoid code-duplication. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: add S805X based P241 boardNeil Armstrong
The Amlogic P241 board is the Reference Design board for the S805X variant of the Amlogic Meson GXL SoC family. The P241 board has the following features : - 1GiB DDR4 Memory - HDMI Connector with CEC - A/V jack with Stereo Audio and CVBS - 10/100 Ethernet - 2x USB2.0 Type-A - On-board WiFi SDIO Module - On-board eMMC storage - Infraread Received - Factory Reset button - UART connector Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-11-16Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-09kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19arm64: dts: meson-axg: add initial A113D SoC DT supportYixun Lan
Try to add basic DT support for the Amlogic's Meson-AXG A113D SoC, which describe components as follows: Reserve Memory, CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-11ARM64: dts: meson-gxm: Add Vega S96 boardNeil Armstrong
The Tronsmart Vega S96 is a TV box derived from Amlogic q200 reference design. Cc: support@tronsmart.com Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Oleg Ivanov <balbes-150@yandex.ru> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-11ARM64: dts: meson-gxm: Add support for Khadas VIM2Neil Armstrong
The Khadas VIM2 is a Single Board Computer, respin of the origin Khadas VIM board, using an Amlogic S912 SoC and more server oriented. It provides the same external connectors and header pinout, plus a SPI NOR Flash, a reprogrammable STM8S003 MCU, FPC Connector, Cooling FAN header and Pogo Pads Arrays. Cc: Gouwa <gouwa@szwesion.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-06-22ARM64: dts: meson-gxl: Add Libre Technology CC supportJerome Brunet
Add support for the CC board from Shenzhen Libre Technology More information about the board are available here: https://libre.computer/blog/ Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-05-30arm64: dts: amlogic: Add NanoPi K2Andreas Färber
The FriendlyARM NanoPi K2 is a single-board computer. Cc: techsupport@friendlyarm.com Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-05-30arm64: dts: meson-gxm: Add R-Box ProAndreas Färber
The R-Box Pro is a TV box derived from Amlogic q200 reference design. It uses an AP6255 Wifi module. It features an LED tube that lights a surrounding stripe and the top logo in blue or red or pink'ish - blue is on by default, and red (i.e., pink) is configured as panic indicator. This device is available in at least two models, with 2 GB vs. 3 GB RAM as well as varying eMMC size. The intent is to handle this with a single .dts that gets the actual RAM size from U-Boot. Cc: ada@kingnoval.com Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-05-17arm64: dts: amlogic: Sort MakefileAndreas Färber
Sort the .dtb files alphabetically to make clear where to add new ones. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-23ARM64: dts: meson-gxl: add support for the Khadas VIM boardMartin Blumenstingl
The Khadas VIM series consists of two boards which are almost identical: They are both using the same GXL S905X SoC, 100Mbit/s ethernet (through the SoC-internal PHY), 2GB DDR3 memory, a micro-SD card slot, onboard eMMC, Broadcom based SDIO WIFI, 2x USB A and 1x USB Type-C (the latter with OTG support). The red LED is driven by PWM_AO_B (which allows dimming), while the blue LED is managed by the firmware. The differences are: - the VIM Pro has a 16GB eMMC module, while the VIM only has 8GB - the VIM Pro uses an AP6255 a/b/g/n/ac WIFI module, while the VIM comes with an AP6212 b/g/n SDIO WIFI module (the Vim uses an 8GB eMMC module, while The boards are based on Amlogic's GXL S905X P212 reference design, which is why most of the functionality (all MMC controllers and power sequences, IR remote input, the main UART, ADC and ethernet) is simply inherited from meson-gxl-s905x-p212.dtsi. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-10ARM64: dts: meson-gxl: Add support for HwaCom AmazeTVCarlo Caione
This patch adds support for the HwaCom AmazeTV set-top-box. The hardware configuration is really similar to the other GXL boards but for this hardware we need to limit the max-frequency of the eMMC to have it working. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-23ARM64: dts: meson-gxl: rename Nexbox A95x for consistencyKevin Hilman
Since the GXL family has S905X and S905D SoCs, we're keeping the SoC name in the DTS filename for clarity. Rename this file accordingly to be consistent with the rest of the GXL DTS files. Cc: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-23ARM64: dts: meson-gxbb: Add support for WeTek Hub and PlayNeil Armstrong
Adds support for the WeTek Hub and Play2 boards. The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more traditionnal Satellite or Terrestrial and IPTv Set-Top-Box. Both are based on the p200 Reference Design and out-of-tree support is based on LibreELEC kernel at [1]. [1] https://github.com/wetek-enigma/linux-amlogic Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-19ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistencyNeil Armstrong
In order to keep consistency naming with the Nexbox A1 DTS file, remove the S912 SoC name in the GXM DT files. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-28ARM64: dts: meson-gxl: Add support for Nexbox A95XNeil Armstrong
The Nexbox A95X exists with a Meson GXBB (S905) Soc or a Meson GXL SoC (S905X). Add the S905X variant which uses the internal PHY instead of an external PHY. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-28ARM64: dts: meson-gxm: Add support for the Nexbox A1Neil Armstrong
Add support for the Nexbox A1 board based on the Amlogic S912 SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: replace '_' in node-names with '-'] Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-23ARM64: dts: Add support for Meson GXMNeil Armstrong
Following the Amlogic Linux kernel, it seem the only differences between the GXL and GXM SoCs are the CPU Clusters. This commit renames the gxl-s905d-p23x DTSI in a common file for S905D p23x and S912 q20x boards. Then adds a meson-gxm dtsi and reproduce the P23x to Q20x boards dts files since the S905D and S912 SoCs shares the same pinout and the P23x and Q20x boards are identical. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-23 14:37:00 +0000