summaryrefslogtreecommitdiff
path: root/arch/arm/tools/Makefile
AgeCommit message (Collapse)Author
2021-06-07ARM: 9086/1: syscalls: use pattern rules to generate syscall headersMasahiro Yamada
Use pattern rules to unify similar build rules between OABI and EABI. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-07ARM: 9085/1: remove unneeded abi parameter to syscallnr.shMasahiro Yamada
You do not need to pass the abi parameter to syscallnr.sh because it parses all the lines of syscall.tbl except comments anyway. Simplify the code. Also, remove unneeded single-quoting. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-07ARM: 9084/1: simplify the build rule of mach-types.hMasahiro Yamada
The directory of mach-types.h is created a couple of lines above: _dummy := $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)') \ The 'mkdir -p' command is redundant. scripts/Kbuild.include defines real-prereqs as a shorthand for $(filter-out $(PHONY),$^). Let's use it to simplify the code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-25ARM: 9067/1: syscalls: switch to generic syscallhdr.shMasahiro Yamada
Many architectures duplicate similar shell scripts. This commit converts ARM to use scripts/syscallhdr.sh, and also collects OABI/OEBI syscalls into unistd-eabi.h/unistd-oabi.h, removing unistd-common.h. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-25ARM: 9068/1: syscalls: switch to generic syscalltbl.shMasahiro Yamada
Many architectures duplicate similar shell scripts. This commit converts ARM to use scripts/syscalltbl.sh. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-22arch: syscalls: remove $(srctree)/ prefix from syscall tablesMasahiro Yamada
The 'syscall' variables are not directly used in the commands. Remove the $(srctree)/ prefix because we can rely on VPATH. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-01-06kbuild: remove redundant target cleaning on failureMasahiro Yamada
Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"), the target file is automatically deleted on failure. The boilerplate code ... || { rm -f $@; false; } is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-18ARM: convert to generated system call tablesRussell King
Convert ARM to use a similar mechanism to x86 to generate the unistd.h system call numbers and the various kernel system call tables. This means that rather than having to edit three places (asm/unistd.h for the total number of system calls, uapi/asm/unistd.h for the system call numbers, and arch/arm/kernel/calls.S for the call table) we have only one place to edit, making the process much more simple. The scripts have knowledge of the table padding requirements, so there's no need to worry about __NR_syscalls not fitting within the immediate constant field of ALU instructions anymore. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-18ARM: remove indirection of asm/mach-types.hRussell King
Arrange for mach-types.h to be directly generated in the relevant path, so we don't need a one-liner file in arch/arm/include/asm/. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-04-19ARM: 8562/1: suppress "include/generated/mach-types.h is up to date."Masahiro Yamada
For incremental build, "include/generated/mach-types.h is up to date" is every time displayed like follows: $ make ARCH=arm CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CHK include/generated/bounds.h CHK include/generated/timeconst.h CHK include/generated/asm-offsets.h This commit avoids such a clumsy log and introduces Kbuild standard log style: GEN include/generated/mach-types.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-12ARM: boot: Fix usage of kechoFabio Estevam
Since commit edc88ceb0 (ARM: be really quiet when building with 'make -s') the following output is generated when building a kernel for ARM: echo ' Kernel: arch/arm/boot/Image is ready' Kernel: arch/arm/boot/Image is ready Building modules, stage 2. echo ' Kernel: arch/arm/boot/zImage is ready' Kernel: arch/arm/boot/zImage is ready As per Documentation/kbuild/makefiles.txt the correct way of using kecho is '@$(kecho)'. Make this change so no more unwanted 'echo' messages are displayed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-09ARM: be really quiet when building with 'make -s'Arnd Bergmann
Sometimes we want the kernel build process to only print messages on errors, e.g. in automated build testing. This uses the "kecho" macro that the build system provides to hide a few informational messages. Nothing changes for a regular "make" or "make V=1". Without this patch, building any ARM kernel results in: Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Marek <mmarek@suse.cz>
2009-12-12arm: move mach-types to include/generatedSam Ravnborg
Simplified arch/arm/Makefile by dropping the maketools target It was undocumented and not needed Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Michal Marek <mmarek@suse.cz>
2008-08-07[ARM] Add support for arch/arm/mach-*/include and arch/arm/plat-*/includeRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!