summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap
AgeCommit message (Collapse)Author
2010-10-01Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: McBSP: tx_irq_completion used in rx_irq_handler omap: Fix compile dependency to LEDS_CLASS
2010-09-25ARM: 6408/1: omap: Map only available sram memorySantosh Shilimkar
Currently we map 1 MB section while setting up SRAM on OMAPs Regardless of the actual memory. The physical OCM RAM available on OMAP SOCs is in order of KBs. This patch maps only available sram and cleans up some un-necessary cpu_is_xxx checks. Mapping un-available or non-accessible(secure) memory on the newer ARM processor is dangerous. Because ARM CPUs can now speculatively prefetch, we should avoid mapping any no-existing or secure memory. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-23omap: McBSP: tx_irq_completion used in rx_irq_handlerScott Ellis
Looks like a typo from commit d6d834b010. Signed-off-by: Scott Ellis <scott@jumpnowtek.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-15omap: Fix compile dependency to LEDS_CLASSTony Lindgren
If we LEDS_CLASS is not selected, we will get undefined reference to `led_classdev_register'. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-16omap: Fix sev instruction usage for multi-omapTony Lindgren
Otherwise we get the following error with omap3_defconfig and CONFIG_SMP: Error: selected processor does not support `sev' Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-08-11omap_hsmmc: add init_card pass-through callbackGrazvydas Ignotas
This will allow us to set up special cards in machine drivers just after they are detected by MMC core. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-08Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits) OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store() OMAP: DSS2: Fix error path in omap_dsi_update() OMAP: DSS2: TDO35S: fix video signaling OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes OMAP: DSS2: OMAPFB: Fix probe error path OMAP3EVM: Replace vdvi regulator supply with vdds_dsi OMAP: DSS2: Remove extra return statement OMAP: DSS2: adjust YUV overlay width to be even OMAP: DSS2: OMAPFB: Fix sysfs mirror input check OMAP: DSS2: OMAPFB: Remove redundant color register range check OMAP: DSS2: OMAPFB: Remove redundant rotate range check OMAP: DSS2: OMAPFB: Check fb2display() return value OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged OMAP: DSS2: DSI: detect unsupported update requests OMAP: DSS2: DSI: increase FIFO low threshold OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size OMAP: DSS2: change manual update scaling setup OMAP: DSS2: DSI: use BTA to end the frame transfer ...
2010-08-08Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits) omap: mailbox: reorganize headers omap: mailbox: standarize on 'omap-mailbox' omap: mailbox: only compile for configured archs omap: mailbox: simplify omap_mbox_register() omap: mailbox: reorganize registering omap: mailbox: add IRQ names omap: mailbox: remove unecessary fields omap: mailbox: don't export unecessary symbols omap: mailbox: update omap1 probing omap: mailbox: use correct config for omap1 omap: mailbox: 2420 should be detected at run-time omap: mailbox: reorganize structures omap: mailbox: trivial cleanups omap mailbox: Set a device in logical mbox instance for traceability omap: mailbox: convert block api to kfifo omap: mailbox: remove (un)likely macros from cold paths omap: mailbox cleanup: split MODULE_AUTHOR line omap: mailbox: convert rwlocks to spinlock Mailbox: disable mailbox interrupt when request queue Mailbox: new mutext lock for h/w mailbox configuration ...
2010-08-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits) ALSA: hda - Add pin-fix for HP dc5750 ALSA: als4000: Fix potentially invalid DMA mode setup ALSA: als4000: enable burst mode ALSA: hda - Fix initial capsrc selection in patch_alc269() ASoC: TWL4030: Capture route runtime DAPM ordering fix ALSA: hda - Add PC-beep whitelist for an Intel board ALSA: hda - More relax for pending period handling ALSA: hda - Define AC_FMT_* constants ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs ALSA: hda - Add support for HDMI HBR passthrough ALSA: hda - Set Stream Type in Stream Format according to AES0 ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF ASoC: wm9081: fix resource reclaim in wm9081_register error path ASoC: wm8978: fix a memory leak if a wm8978_register fail ASoC: wm8974: fix a memory leak if another WM8974 is registered ASoC: wm8961: fix resource reclaim in wm8961_register error path ASoC: wm8955: fix resource reclaim in wm8955_register error path ASoC: wm8940: fix a memory leak if wm8940_register return error ASoC: wm8904: fix resource reclaim in wm8904_register error path ...
2010-08-05OMAP: DSS2: change manual update scaling setupTomi Valkeinen
Currently the update area on manual update displays is automatically enlargened to fully cover scaled overlays. This patch makes that optional, allowing the panel driver to choose if it's used or not. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-05Merge branch 'topic/asoc' into for-linusTakashi Iwai
2010-08-04Merge branch 'v2.6.35-omap-mailbox-for-next' of ↵Tony Lindgren
git://gitorious.org/~doyu/lk/mainline into omap-for-linus Conflicts: arch/arm/mach-omap1/devices.c
2010-08-04omap: mailbox: reorganize headersFelipe Contreras
Remove kernel.h and module.h since they are not used correctly anyway. Also, remove device.h since it comes along with platform_device.h (always will I guess). Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: simplify omap_mbox_register()Felipe Contreras
No need to dynamically register mailboxes one by one. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: remove unecessary fieldsFelipe Contreras
Nobody is using them. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap mailbox: Set a device in logical mbox instance for traceabilityHiroshi DOYU
With this patch, you'll get the following sysfs directories. This structure implies that a single platform device, "omap2-mailbox" holds multiple logical mbox instances. This could be the base to add sysfs files for each logical mboxes. Then userland application can access a mbox through sysfs entries if necessary(ex: setting kfifo size dynamically) ~# tree -d -L 2 /sys/devices/platform/omap2-mailbox/ /sys/devices/platform/omap2-mailbox/ |-- driver -> ../../../bus/platform/drivers/omap2-mailbox |-- mbox | |-- dsp <- they are each instances of logical mailbox. | |-- ducati | |-- iva2 | |-- mbox01 | |-- mbox02 | |-- mbox03 | |-- ..... | `-- tesla |-- power `-- subsystem -> ../../../bus/platform This was wrongly dropped by: commit c7c158e57bce6220644f2bcd65d82e1468aa40ec Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: convert block api to kfifoOhad Ben-Cohen
The underlying buffering implementation of mailbox is converted from block API to kfifo due to the simplicity and speed of kfifo. The default size of the kfifo buffer is set to 256 bytes. This value is configurable at compile time (via CONFIG_OMAP_MBOX_KFIFO_SIZE), and can be changed at runtime (via the mbox_kfifo_size module parameter). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: remove (un)likely macros from cold pathsOhad Ben-Cohen
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox cleanup: split MODULE_AUTHOR lineOhad Ben-Cohen
use multiple MODULE_AUTHOR lines for multiple authors Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: convert rwlocks to spinlockOhad Ben-Cohen
rwlocks are slower and have potential starvation issues therefore spinlocks are generally preferred. see also: http://lwn.net/Articles/364583/ Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Kanigeri Hari <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: disable mailbox interrupt when request queueFernando Guzman Lugo
when blk_get_request fails to get the request it is returning without read the message from the mailbox fifo, then when it leaves the isr and interruption is trigger again and again and the workqueue which get elements from the request queue is never executed and the kernel is stuck and shows a softlockup message. Now the mailbox interrupt is disabled when request queue is full and enabled when it pop a elememt form the request queue. Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: new mutext lock for h/w mailbox configurationHiroshi DOYU
mailbox startup and shutdown are being executed against a single H/W module, and a mailbox H/W module is totally __independent__ of the registration of logical mailboxes. So, an independent mutext should be used for startup and shutdown. Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: Check valid registered callback before callingFernando Guzman Lugo
This patch checks if the mailbox user has assinged a valid callback fuction before calling it. Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: flush pending deferred works before freeing blk queueFernando Guzman Lugo
flush pending deferred works before freeing blk_queue to prevent any attempt of access to blk_queue after it was freed Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: free mailbox interrupt before freeing blk queueFernando Guzman Lugo
Free interrupt before freeing blk_queue to avoid any attempt of access to blk_queue after it was freed. Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04OMAP3630: Add ES1.1 and ES1.2 detectionAnand Gadiyar
Add revision detection for ES1.1 and ES1.2. Set default revision as ES1.2. Add CHIP_GE_OMAP3630ES1_1 to detect revisions 1.1 and later. This is needed for at least one feature that is broken in 3630ES1.0 but exists on older (3430 ES3.1) and newer revisions. Additionally, update some of the CHIP_GE_* macros to use other macros for ease of maintenance. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Manjunatha GK <manjugk@ti.com> [tony@atomide.com: update to remove fallthrough handling] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04omap: device: improve errors handlingArtem Bityutskiy
Do not forget to check the 'platform_device_add_data()' error code in 'omap_device_build_ss()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04Merge branch 'devel-map-io' into omap-for-linusTony Lindgren
2010-08-04omap3: introduce omap3_map_ioMike Rapoport
Most OMAP3-based boards use exactly the same code for .map_io method in the machine_desc structure. This patch introduces omap3_map_io and updates board-* files to use it as .map_io method. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04omap3: Unify omap2_set_globals_3[43,6x]x functionsSergio Aguirre
The only difference between them is the physical address of the uart4 port, which is only present in 36xx chips. We don't really need to care about keeping these 2 functions, since the decision to use uart4 is more cleanly done later when we do have access to omap_revision variable. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: added comment for the uart4_phys] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into omap-for-linusTony Lindgren
2010-08-03OMAP: DSS2: Add Nokia DSI command mode panel configuration structJani Nikula
Introduce a configuration struct for platform/board specific information of Nokia DSI command mode panels, to be used in addition to struct omap_dss_device (passed via the 'void *data' member). Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: change dsi_vc_dcs_read_2 parametersTomi Valkeinen
Change dsi_vc_dcs_read_2() data parameter to two u8 parameters to make the byte-order clear. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-02omap3 nand: cleanup virtual address usagesSukumar Ghorai
This patch removes direct reference of gpmc address from generic nand platform code. Nand platform code now uses wrapper functions which are implemented in gpmc module. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap3 gpmc: functionality enhancementSukumar Ghorai
few functions added in gpmc module and to be used by other drivers like NAND. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02Merge branch 'devel-misc' into omap-for-linusTony Lindgren
2010-08-02OMAP3: AM3505/3517 do not have IO wakeup capabilitystanley.miao
AM3505/3517 doesn't have IO wakeup capability, so we do not need to set the bit OMAP3430_EN_IO and the bit OMAP3430_EN_IO_CHAIN in the register PM_WKEN_WKUP when the system enters suspend state. Tested on AM3517EVM and OMAP3530EVM. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap: dma: Support for prefetch in destination synchronizedtransferSamu Onkalo
Omap DMA controller can prefetch data in advance in case of destination synchronized data transfer. This may increase performance when target HW block doesn't have fifo. Data is waiting for transfer request in DMA fifo instead of read from memory. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap2: Fix GPIO numbers and smc91x for 2430sdpTony Lindgren
Fix GPIO numbers and smc91x for 2430sdp. The earlier code had cut and paste errors from 3430sdp code. Also, 2430 has five GPIO banks for a total of 160 GPIO lines. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap1: omap7xx clocks, mux, serial fixesCory Maccarrone
This change adds in the necessary clocks and mux pins for UART control on omap7xx devices. I also made a change in the serial code to only try and initialize two UARTs in omap_serial_init, as these devices don't have three. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap: Add back UART MDR1 check into uncompress.hTony Lindgren
Recent DEBUG_LL and uncompress.h changes removed the check_port() as pointed out by Cory Maccarrone <darkstar6262@gmail.com>. This causes some boards to not boot, so add back the MDR1 register check. The MDR1 register tells the mode of omap uart. Based on an earlier patch by Cory Maccarrone <darkstar6262@gmail.com>. Tested-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap4: Add smc API to read AuxCoreBoot0 registerSantosh Shilimkar
This patch adds a secure API to read AuxCoreBoot0 register to check the cpu boot status. It also moves the other smc APIs to common omap44xx-smc.S. This APIs should not be marked as __INIT because we need these to be present for CPU hotplug Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-27ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMBRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26OMAP: PM constraints: add omap_pm_set_min_clk_rate()Paul Walmsley
Add omap_pm_set_min_clk_rate(). This constraint is meant for use by device drivers to translate a certain device-specific performance constraint (e.g., "minimum polygons per second") to a clock rate for the driver's device, given the driver's intimate knowledge of the device hardware (e.g., device type, device hardware revision, firmware revision, etc.) From a general PM core perspective, clock rate is probably the closest general analog to "performance" that is available, but the exact mapping from a use-case-specific performance constraint to clock rate must be done by the driver. Drivers intended for upstream merging shouldn't hardcode specific clock rates in their code without basing those rates on some performance criteria requested through the driver's subsystem (ideally, from userspace). Imre Deak <imre.deak@nokia.com> described the need and use-case for this constraint, and discussed the implementation - thanks, Imre. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Imre Deak <imre.deak@nokia.com>
2010-07-26OMAP: PM constraints: add return values; add requesting device param to ↵Paul Walmsley
omap_pm_set_max_dev_wakeup_lat() Add return values to the PM constraint functions. This allows the PM core to provide feedback to the caller if a constraint is not possible. Update the one upstream user of omap_pm_set_max_mpu_wakeup_lat() to add a compatibility wrapper, needed until the driver is changed. Update some of the documentation to conform more closely to kerneldoc style. Add an additional device parameter to omap_pm_set_max_dev_wakeup_lat() to identify the device requesting the constraint. This is so repeated calls to omap_pm_set_max_dev_wakeup_lat() with the same requesting device can override the device's previously-set constraint. Also, it allows the PM core to make a decision as to whether or not the constraint should be satisfied, based on the caller's identity. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-07-26OMAP2+: hwmod/device: update documentation and copyrightPaul Walmsley
Update some minor documentation issues and update copyright for omap_device/omap_hwmod code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-07-26OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_vaPaul Walmsley
Add omap_device_get_mpu_rt_va(). This is intended to be used by device drivers (currently, via a struct platform_data function pointer) to retrieve their corresponding device's virtual base address that the MPU should use to access the device. This is needed because the omap_hwmod code does its own ioremap(), in order to gain access to the module's OCP_SYSCONFIG register. Add omap_hwmod_get_mpu_rt_va(). omap_device_get_mpu_rt_va() calls this function to do the real work. While here, rename struct omap_hwmod._rt_va to struct omap_hwmod._mpu_rt_va, to reinforce that it refers to the MPU's register target virtual address base (as opposed to, for example, the L3's). In the future, this belongs as a function in an omap_bus, so it is not necessary to call this through a platform_data function pointer. The use-case for this function was originally presented by Santosh Shilimkar <santosh.shilimkar@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-07-26OMAP: PM: create omap_devices for MPU, DSP, L3Kevin Hilman
Create simple omap_devices for the main processors and busses. This is required to support the forth-coming device-based OPP approach, where OPPs are managed and tracked at the device level. Also, move these common PM init functions into a common_pm_init call that is called as a device_initcall(). The PM init is done at this level to ensure that the driver core is initialized before initialized. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> [paul@pwsan.com: sparse warnings cleaned up; newly-created functions moved from mach-omap2/io.c to mach-omap2/pm.c; newly-created functions renamed to start with "omap2" rather than "omap"] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-07-26OMAP: omap_device: ensure hwmod tracks attached omap_device pointerKevin Hilman
The omap_hwmod struct has a field to track the omap_device that is attached to it, but it was not being assigned. Fix by assigning omap_device pointer when omap_device is built. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> [paul@pwsan.com: use an array index rather than pointer arithmetic] Signed-off-by: Paul Walmsley <paul@pwsan.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 14:13:33 +0000