summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio
AgeCommit message (Collapse)Author
2021-07-24dt-bindings: iio: st: Remove wrong items length checkMaxime Ripard
The original bindings was listing the length of the interrupts as either 1 or 2, depending on the setup. This is also what is enforced by the top level schema. However, that is further constrained with an if clause that require exactly two interrupts, even though it might not make sense on those devices or in some setups. Let's remove the clause entirely. Cc: Denis Ciocca <denis.ciocca@st.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Fixes: 0cd71145803d ("iio: st-sensors: Update ST Sensor bindings") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210721140424.725744-16-maxime@cerno.tech Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-05Merge tag 'staging-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big set of IIO and staging driver patches for 5.14-rc1. Loads of IIO driver updates and additions in here, the shortlog has the full details. For the staging side, we moved a few drivers out of staging, and deleted the kpc2000 drivers as the original developer asked us to because no one was working on them anymore. Also in here are loads of coding style cleanups due to different intern projects focusing on the staging tree to try to get experience doing kernel development. All of these have been in the linux-next tree for a while with no reported problems" * tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits) staging: hi6421-spmi-pmic: cleanup some macros staging: hi6421-spmi-pmic: change identation of a table staging: hi6421-spmi-pmic: change a return code staging: hi6421-spmi-pmic: better name IRQs staging: hi6421-spmi-pmic: use devm_request_threaded_irq() staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions spmi: hisi-spmi-controller: move driver from staging phy: phy-hi3670-usb3: move driver from staging into phy staging: rtl8188eu: remove include/rtw_debug.h header staging: rtl8188eu: remove GlobalDebugLevel variable staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition staging: rtl8188eu: remove RT_TRACE macro staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c ...
2021-07-03Merge tag 'devicetree-for-5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refine reserved memory nomap handling - Merge some PCI and non-PCI address handling implementations - Simplify of_address.h header ifdefs - Improve printk handling of some 64-bit types - Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM, linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu, renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC to DT schema - Convert mux and mux controller bindings to schema. This includes MDIO IIO, and I2C muxes. - Add Arm PL031 RTC binding schema - Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd - Fix some stale doc references - Remove stale property-units.txt. Superseded by schema in dt-schema repo. - Fixes for 'unevaluatedProperties' handling (enabled with experimental json-schema support) - Drop redundant usage of minItems and maxItems across the tree - Update some examples to use bindings with a schema * tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits) dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users dt-bindings: display: renesas,du: Fix 'ports' reference dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference dt-bindings: crypto: ccree: Convert to json-schema dt-bindings: fpga: zynq: convert bindings to YAML dt-bindings: rtc: zynqmp: convert bindings to YAML dt-bindings: interrupt-controller: Convert ARM VIC to json-schema of: of_reserved_mem: mark nomap memory instead of removing of: of_reserved_mem: only call memblock_free for normal reserved memory dt-bindings: Drop redundant minItems/maxItems dt-bindings: spmi: Correct 'reg' schema of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE() dt-bindings: clk: vc5: Fix example dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML of: Remove superfluous casts when printing u64 values of: Fix truncation of memory sizes on 32-bit platforms dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings dt-bindings: pwm: Use examples with documented/matching schema ...
2021-06-21dt-bindings: Drop redundant minItems/maxItemsRob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending. Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Kamal Dasu <kdasu.kdev@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> Cc: Lee Jones <lee.jones@linaro.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for MMC Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-By: Vinod Koul <vkoul@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210615191543.1043414-1-robh@kernel.org
2021-06-13dt-bindings: iio: accel: bma180/bma255: Move bma254 to bma255 schemaStephan Gerhold
BMA254 is very similar to BMA253/BMA255 which are both supported by the bmc150-accel driver. In general, there is quite some overlap between the bma180 and bmc150-accel driver, but the bmc150-accel driver has a few more features (e.g. motion trigger/interrupt). Let's move bma254 over to the bma255 schema (bmc150-accel driver). Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210611080903.14384-10-stephan@gerhold.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13dt-bindings: iio: bma255: Allow multiple interruptsStephan Gerhold
BMA253 has two interrupt pins (INT1 and INT2) that can be configured independently. At the moment the bmc150-accel driver does not make use of them but it might be able to in the future, so it's useful to already specify all available interrupts in the device tree. Set maxItems: 2 for interrupts to allow specifying a second one. This is necessary as preparation to move the bosch,bma254 compatible from bosch,bma180.yaml to bosch,bma255.yaml since bma180 allows two interrupts, but BMA254 is better supported by the bmc150-accel driver. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210611080903.14384-9-stephan@gerhold.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13dt-bindings: iio: accel: bma255: Document bosch,bma253Stephan Gerhold
BMA253 is mostly like BMA255 that is already supported by the bmc150-accel driver. Document an extra bosch,bma253 compatible for it. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210611080903.14384-7-stephan@gerhold.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-09Merge tag 'iio-for-5.14a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 1st set of new IIO/counter device support, features and cleanup for 5.14 There are a couple of large cleanup sets in here alongside a number of new drivers. Note an immutable branch merged to add a stub for i2c_verify_client() as needed to avoid a build issue in the fxls8962af driver as a result of a workaround for a device errata that only applies when i2c interface is used. Counters ======== New device support * intel,quadrature encoder peripheral found on Elkhart Lake platforms. - New driver. IIO === New device support * amstaos,tsl2591 ambient light sensor. - New driver + bindings - Follow up fix to ensure some local variables are suitable for error handling. * fsl,fxls8962af + fsl,fxls8964af accelerometers - New driver + bindings - Includes an errata work around that cause a build bot failure fixed by adding a stub to i2c. * kionix,kxcjk-1013 - Add support for KX023-1025 device. Mostly a different register map that needed to be supported. * murata,sca3300 accelerometer - New driver + bindings * st,lsm9ds0 IMU - Rework of st,sensors driver to cleanly support this new glue driver that enables the two parts of the LSM9DS0. * ti,tsc2046 touchscreen controller ADC. - New driver. Intent here is to use this with existing IIO consumer drivers such as resistive-adc-touch. - Follow up fix to avoid an issue with unsigned subtraction in error check. * ti,tmp117 digital temperature sensor - New driver + bindings Features * adi,ad5755 - Add missing dt-binding doc * adi,ad7298 - Add ACPI ID used on Intel Galileo Gen 1 boards. - Add missing dt-binding doc * adi,ad7476 - Add missing dt-binding doc * adi,ad7746 - Add missing dt-binding doc for this driver that will hopefully move out of staging shortly. Update staging driver to use the binding instead of platform data. * adi,adis16201 + adis16209 - Add missing dt-binding doc * adi,adis16480 - Support burst mode for adis16495 and adis16497 parts. * bosch,bma220 - Add missing dt-binding doc * fsl,mma7455 - Add missing dt-binding doc * iio-rescale - Support handling of processed channels from provider. Some ADCs require (typically non linear) calibration functions to be applied, and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be used as providers to the iio-rescale driver which needs to handle them somewhat differently from IIO_CHAN_INFO_RAW * sensiron,sps30 - Support the serial interface. Note this required significant refactoring of existing driver. * st,st-sensors - Add mount matrix support for normal dt-binding whilst continuing to support the odd ACPI approach for accelerometers. * ti,dac082s085 + similar - Add missing dt-binding doc * trivial-devices - add entries for - memsic,mx4005, memsic,mx6255 and memsic,mxc6655 - sensortek,stk8312 and sensortek,stk8ba50 Cleanup / minor fixes * core - Use devm_add_action_or_reset() to replace boilerplate in several driver and core IIO devm_* functions. - Fix an error path issue introduced by above, that could return an error pointer rather than the expected null from dev_iio_device_alloc() - Move more IIO internals related fields from struct iio_dev to struct iio_dev_opaque. - Drop unused final update of in_loc in demux setup. * Docs - Move some docs from driver specific to core dos to avoid replication of names which the documentation builder does not allow. Note this means adding a few device specific notes to the general docs to cover the more unusual uses of the ABI. - ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we have the bufferX/* variant. Not we are not getting rid of these interfaces, just encouraging new code to use the new interface. * IIO wide: - Tidy up new cases of dev.parent etc being set in drivers as the core now does it. - Fix more cases of possible miss-aligned buffers when passed to iio_push_to_buffers_with_timestamp(). Note we only have one known instance of anyone seeing this bug actually happening, so this has been a low priority cleanup effort for several cycles. - sysfs_emit() used in more drivers. - Runtime pm tidy up and use of pm_runtime_resume_and_get() - Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires that the timestamp when inserted by naturally aligned + consumers can assume that all fields are naturally aligned. Part of a long running effort, with at least 2 more series to come tackling additional variants. - Stop specifying "mount-matrix" property name in every lookup of the mount matrix from firmware by hard coding it in the core. * adi,ad7476 - Handle the variety of different regulators used by the parts supported by this driver (came up in dt-binding review) * adi,ad7746 - Trivial drop of if (ret) return ret; return 0; pattern - Tidy up comments - Pull capdac setup out to own function. * adi,ad7766 - Trivial drop of if (ret) return ret; return 0; pattern * adi,adis - Avoid returning error codes in interrupt handlers. - Handle a failure in spi_write in the trigger handler. - Rework to add updating of device page after changing it. - Don't push data to IIO buffers when read failed. - Add configuration of burst max speed to core avoid handling this in each driver. - Use the adis_dev_lock() helper in adis16260 and adis16136 drivers. - Excessive includes cleanup via include-what-you-use static checker after zero day highlighted that these needed updating. * afe - Amend binding to add #io-channel-cells, thus allowing this IIO consumer to also be an IIO provider. * aosong,am2315 - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * bosch,bma180 - Adding missing bandwidth settings (500, 1000 Hz) * bosch,bme680 - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * ep93xx_adc, - Drop a redundant error print. * maxim,max118 - Convert remainder of probe() to devm_ managed functions. - Avoid some repeated jumping back and forth between iio_dev and spi structures. * maxim,max11100 - Use get_unaligned_be16() instead of open coding. - Convert remainder of probe() to devm_ managed functions. * samsung,exynos_adc - Unused error value dropped. * sensiron,sgp30 - Drop use of %hx in favor of %x and letting the normal type conversion work. * sensortek,stk8312 - Add lowercase device id and note uppercase version deprecated. - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * sprx,sc72xx_adc - add MODULE_DEVICE_TABLE * st,lsm6dsx - Fix docs of valid ODRs * st,sensors - dt-binding rework. Two efforts on this crossed in a previous cycle so this update cherry picks the best of the two yaml conversions. - Don't copy the channel spec array as now ext_info is no longer modified. * st,stm32-adc - tidy up some docs that were marked as kernel-doc but aren't. * ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626 - Convert remainder of probe() functions to devm_ managed functions to simplify error handing and remove paths. * tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits) i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C iio: adis: Cleanout unused headers iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth counter: Add support for Intel Quadrature Encoder Peripheral staging: iio: cdc: ad7746: extract capac setup to own function staging: iio: cdc: ad7746: clean up probe return staging: iio: cdc: ad7746: remove ordinary comments iio: adc: ti-adc161s626: Use devm managed functions for all of probe. iio: adc: ti-adc108s102: Use devm managed functions for all of probe() iio: adc: ti-adc0832: Use devm managed functions for all of probe() iio: adc: ti-adc081c: Use devm managed functions for all of probe() iio: adc: max1118: Avoid jumping back and forth between spi and iio structures iio: adc: max1118: Use devm_ managed functions for all of probe iio: adc: max11100: Use devm_ functions for rest of probe() iio: adc: max11100: Use get_unaligned_be16() rather than opencoding. iio: chemical: sgp30: Drop use of %hx in format string. iio: gyro: st_gyro: Support mount matrix iio: magnetometer: st_magn: Support mount matrix iio: accel: st_sensors: Stop copying channels iio: accel: st_sensors: Support generic mounting matrix ...
2021-06-03dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746Lucas Stankus
Add device tree binding documentation for AD7746 cdc in YAML format. Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/2c2f4d486a94e0740e112bfac0d9306bdb7ea69c.1619841953.git.lucas.p.stankus@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-02dt-bindings: iio: multiplexer: Convert io-channel-mux bindings to DT schemaJonathan Cameron
Straight conversion of the txt file using the mux-consumer.yaml binding now that is available. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Peter Rosin <peda@axentia.se> [robh: Drop quotes and $ref for mux-controls] Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210522112908.1611389-3-jic23@kernel.org
2021-06-01dt-bindings: mux: Convert mux controller bindings to schemaRob Herring
Convert the mux controller bindings to DT schema. Cc: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210526184839.2937899-4-robh@kernel.org
2021-05-17dt-bindings: More removals of type references on common propertiesRob Herring
Users of common properties shouldn't have a type definition as the common schemas already have one. A few new ones slipped in and *-names was missed in the last clean-up pass. Drop all the unnecessary type references in the tree. A meta-schema update to catch these is pending. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Odelu Kukatla <okukatla@codeaurora.org> Cc: Alex Elder <elder@kernel.org> Cc: Shengjiu Wang <shengjiu.wang@nxp.com> Cc: linux-clk@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210510204524.617390-1-robh@kernel.org
2021-05-17dt-bindings: iio: kionix,kxcjk1013: Document kionix,kx023-1025Stephan Gerhold
The KX023-1025 accelerometer uses similar register bits as kxcjk1023, so it can make use of the same driver. Document the new kionix,kx023-1025 compatible that is also supported by the kxcjk-1013 driver now. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings: iio: afe: current-sense-shunt: add io-channel-cellsKrzysztof Kozlowski
The current-sense-shunt is an IIO provider thus can be referenced by IIO consumers (via "io-channels" property in consumer device node). Such provider is required to describe number of cells used in phandle lookup with "io-channel-cells" property. This also fixes dtbs_check warnings like: arch/arm/boot/dts/s5pv210-fascinate4g.dt.yaml: current-sense-shunt: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: ce66e52b6c16 ("dt-bindings:iio:afe:current-sense-shunt: txt to yaml conversion.") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings: iio: accel: fxls8962af: add bindingsSean Nyekjaer
Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF accelerometer sensor. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings:iio:dac:ad5755: txt to yaml format conversion.Jonathan Cameron
Straight forward conversion. Only fiddly bit is the XOR of spi-cpol and spi-cpha. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Link: https://lore.kernel.org/r/20201031184854.745828-40-jic23@kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210424173015.534941-1-jic23@kernel.org
2021-05-17dt-bindings: iio: st,st-sensors: Add LSM9DS0 compatible stringAndy Shevchenko
Enumerate LSM9DS0 (accelerometer and magnetometer parts) via 'st,lsm9ds0-imu' compatible string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210414195454.84183-7-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings:iio:adc: add documentation for TI TSC2046 controllerOleksij Rempel
Add a binding documentation for the TI TSC2046 touchscreen controllers ADC functionality. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210428073208.19570-3-o.rempel@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings:iio:adc: add generic settling-time-us and oversampling-ratio ↵Oleksij Rempel
channel properties Settling time and over sampling is a typical challenge for different IIO ADC devices. So, introduce channel specific settling-time-us and oversampling-ratio properties to cover this use case. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210428073208.19570-2-o.rempel@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings: iio: chemical: sps30: update binding with serial exampleTomasz Duszynski
sps30 has gained support for serial communication so add example to the binding file. While at it remove reg property from list of required properties because it's no-op in case of serial communication. Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings: iio: accel: Add SCA3300 documentationTomas Melin
initial DT bindings for Murata SCA3300 Accelerometer. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210426081041.59807-2-tomas.melin@vaisala.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings:iio:adc:adi,ad7476: Add missing binding documentJonathan Cameron
This binding covers class of simple SPI ADCs which only provide data output - they don't have MOSI pin. The only real variation between them is over how many supplies they use and which one is used for the reference. Michael listed as maintainer for this one as it is his driver and falls under the catch all MAINTAINERS entry for ADI devices. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210425163154.73209-3-jic23@kernel.org
2021-05-17dt-bindings:iio:dac:ti,dac082s085 yaml conversionJonathan Cameron
Fairly simple conversion with the exception of the XOR between spi-cpha and spi-cpol. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20201031134110.724233-17-jic23@kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210401140956.224084-3-jic23@kernel.org
2021-05-17dt-bindings:iio:adc:adi,ad7298 document bindingsJonathan Cameron
The device has a tsens-busy pin, but it's both fiddly and currently ignored by the Linux driver. Given it's not clear whether the binding should be an interrupt, or a GPIO I have left that out for now. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210401174112.320497-7-jic23@kernel.org
2021-05-17dt-bindings:iio:accel:fsl,mma7455 binding docJonathan Cameron
Binding documentation for this driver was missing. Note that the binding and some in tree dts files specifiy interrupts etc but the driver is fairly simple and does not yet make use of them. Listed both Joachim and myself as maintainers for this binding on basis it's Joachim's driver but I don't want to volunteer Joachim too strongly to look after this doc. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joachim Eastwood <manabian@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210401174112.320497-4-jic23@kernel.org
2021-05-17dt-bindings:iio:accel:bosch,bma220 device tree binding documentationJonathan Cameron
Linux driver currently relies on the driver.name to match to the compatible, but that doesn't mean it isn't a good idea to document it. Only real complexity is the 3 separate power supplies. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210401174112.320497-3-jic23@kernel.org
2021-05-17dt-bindings:iio:accel:adis16201 and adis16209 bindingsJonathan Cameron
These two devices have different internal characteristics, but their external connectivity and as a result device tree descriptions are identical. Note that neither driver in Linux currently has an of_match_table but instead rely on matching via name alone. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210401174112.320497-2-jic23@kernel.org
2021-05-17dt-bindings: iio: light: Added AMS tsl2591 device tree bindingJoe Sandom
Device tree binding for AMS/TAOS tsl2591 ambient light sensor. This driver supports configuration via device tree and sysfs. Supported channels for raw infrared light intensity, raw combined light intensity and illuminance in lux. The driver additionally supports iio events on lower and upper thresholds. This is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal. Signed-off-by: Joe Sandom <joe.g.sandom@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210421221330.17007-2-joe.g.sandom@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17iio: st-sensors: Update ST Sensor bindingsLinus Walleij
This adjusts the ST Sensor bindings with the more fine-grained syntax checks that were proposed late in the last kernel cycle and colliding with parallel work. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210412122331.1631643-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17dt-bindings: iio: temperature: Add DT bindings for TMP117Puranjay Mohan
Add devicetree binding document for TMP117, a digital temperature sensor. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210407182147.77221-2-puranjay12@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-28Merge tag 'devicetree-for-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refactor powerpc and arm64 kexec DT handling to common code. This enables IMA on arm64. - Add kbuild support for applying DT overlays at build time. The first user are the DT unittests. - Fix kerneldoc formatting and W=1 warnings in drivers/of/ - Fix handling 64-bit flag on PCI resources - Bump dtschema version required to v2021.2.1 - Enable undocumented compatible checks for dtbs_check. This allows tracking of missing binding schemas. - DT docs improvements. Regroup the DT docs and add the example schema and DT kernel ABI docs to the doc build. - Convert Broadcom Bluetooth and video-mux bindings to schema - Add QCom sm8250 Venus video codec binding schema - Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile Technologies Inc. - Cleanup of DT schema type references on common properties and standard unit properties * tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) powerpc: If kexec_build_elf_info() fails return immediately from elf64_load() powerpc: Free fdt on error in elf64_load() of: overlay: Fix kerneldoc warning in of_overlay_remove() of: linux/of.h: fix kernel-doc warnings of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses dt-bindings: bcm4329-fmac: add optional brcm,ccode-map docs: dt: update writing-schema.rst references dt-bindings: media: venus: Add sm8250 dt schema of: base: Fix spelling issue with function param 'prop' docs: dt: Add DT API documentation of: Add missing 'Return' section in kerneldoc comments of: Fix kerneldoc output formatting docs: dt: Group DT docs into relevant sub-sections docs: dt: Make 'Devicetree' wording more consistent docs: dt: writing-schema: Include the example schema in the doc build docs: dt: writing-schema: Remove spurious indentation dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3 dt-bindings: media: video-interfaces: Drop the example devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt ...
2021-04-26Merge tag 'staging-5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the big set of staging and IIO driver updates for 5.13-rc1. Lots of little churn in here, and some larger churn as well. Major things are: - removal of wimax drivers, no one has this hardware anymore for this failed "experiment". - removal of the Google gasket driver, turns out no one wanted to maintain it or cares about it anymore, so they asked for it to be removed. - comedi finally moves out of the staging directory into drivers/comedi This is one of the oldest kernel subsystems around, being created in the 2.0 kernel days, and was one of the first things added to drivers/staging/ when that was created over 15 years ago. It should have been moved out of staging a long time ago, it's well maintained and used by loads of different devices in the real world every day. Nice to see this finally happen. - so many tiny coding style cleanups it's not funny. Perfect storm of at least 2 different intern project application deadlines combined to provide a huge number of new contributions in this area from people learning how to do kernel development. Great job to everyone involved here. There's also the normal updates for IIO drivers with new IIO drivers and updates all over that subsystem. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits) staging: octeon: Use 'for_each_child_of_node' Staging: rtl8723bs: rtw_xmit: fixed tabbing issue staging: rtl8188eu: remove unused function parameters staging: rtl8188eu: cmdThread is a task_struct staging: rtl8188eu: remove constant variable and dead code staging: rtl8188eu: change bLeisurePs' type to bool staging: rtl8723bs: remove empty #ifdef block staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations staging: rtl8723bs: split too long line staging: rtl8723bs: fix indentation in if block staging: rtl8723bs: fix code indent issue staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*() staging: rtl8192e: indent statement properly staging: rtl8723bs: Remove led_blink_hdl() and everything related staging: comedi: move out of staging directory staging: rtl8723bs: remove sdio_drv_priv structure staging: rtl8723bs: remove unused argument in function staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg() staging: rtl8723bs: fix indentation issue introduced by long line split ...
2021-04-09dt-bindings: fix references for iio-bindings.txtMauro Carvalho Chehab
The iio-bindings.txt was converted into two files and merged at the dt-schema git tree at: https://github.com/devicetree-org/dt-schema Yet, some documents still refer to the old file. Fix their references, in order to point to the right URL. Fixes: dba91f82d580 ("dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema") Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/4efd81eca266ca0875d3bf9d1672097444146c69.1617972339.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-04-07dt-bindings:iio:cdc:adi,ad7150 binding docJonathan Cameron
Binding covering the ad7150, ad7151 and ad7156 capacitance to digital convertors. The only difference between these is how many channels they have (1 or 2) Whilst it is clearly necessary to provide power to the part, we don't need to know the voltage or anything so if it is always on, there should be no need to have it specified in the binding. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210314181511.531414-24-jic23@kernel.org
2021-03-25dt-bindings: iio: adc: Add compatible for Mediatek MT8195Seiya Wang
This commit adds dt-binding documentation of auxadc for Mediatek MT8195 SoC Platform. Signed-off-by: Seiya Wang <seiya.wang@mediatek.com> Link: https://lore.kernel.org/r/20210319023427.16711-7-seiya.wang@mediatek.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25dt-bindings: iio: st,st-sensors add IIS2MDC.LI Qingwu
Add support for ST magnetometer IIS2MDC, an I2C/SPI interface 3-axis magnetometer sensor. The patch was tested on the instrument with IIS2MDC via I2C interface. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> Link: https://lore.kernel.org/r/20210317063902.19300-2-Qing-wu.Li@leica-geosystems.com.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25dt-bindings: iio: Add cros ec proximity yaml docStephen Boyd
Some cros ECs support a front proximity MKBP event via 'EC_MKBP_FRONT_PROXIMITY'. Add a DT binding to document this feature via a node that is a child of the main cros_ec device node. Devices that have this ability will describe this in firmware. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: <devicetree@vger.kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210211024601.1963379-3-swboyd@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-23dt-bindings: Clean-up undocumented compatible stringsRob Herring
Adding checks for undocumented compatible strings reveals a bunch of warnings in the DT binding examples. Fix the cases which are typos, just a mismatch between the schema and the example, or aren't documented at all. In a couple of cases, fixing the compatible revealed some schema errors which are fixed. There's a bunch of others remaining after this which have bindings, but those aren't converted to schema yet. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux-clk@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-i3c@lists.infradead.org Cc: linux-iio@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Alain Volmat <alain.volmat@foss.st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210316194918.3528417-1-robh@kernel.org
2021-03-23dt-bindings: More cleanup of standard unit propertiesRob Herring
Properties with standard unit suffixes already have a type and don't need type references. Fix a few more cases which have gotten added. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kevin Tsai <ktsai@capellamicro.com> Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Dmity Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20210316194824.3526913-1-robh@kernel.org
2021-03-11dt-bindings: adis16475: remove propertyNuno Sá
`adi,scaled-output-hz` is no longer used by the driver. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210218114039.216091-4-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11bindings: iio: adc: Add documentation for ADS131E0x ADC driverTomislav Denis
Add a device tree binding documentation for Texas Instruments ADS131E0x ADC family driver. Signed-off-by: Tomislav Denis <tomislav.denis@avl.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210202084107.3260-3-tomislav.denis@avl.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11dt-bindings: iio: accel: Add bmi088 accelerometer bindingsMike Looijmans
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, the accelerometer part. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210125150732.23873-1-mike.looijmans@topic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-02-22Merge tag 'devicetree-for-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions * tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) driver core: platform: Drop of_device_node_put() wrapper of: Remove of_dev_{get,put}() dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt dt-bindings: can: rcar_canfd: Group tuples in pin control properties dt-bindings: power: renesas,apmu: Group tuples in cpus properties dt-bindings: mtd: spi-nor: Convert to DT schema format dt-bindings: Use portable sort for version cmp dt-bindings: ethernet-controller: fix fixed-link specification dt-bindings: irqchip: Add node name to PRUSS INTC dt-bindings: interconnect: Fix the expected number of cells dt-bindings: Fix errors in 'if' schemas dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required dt-bindings: Fix undocumented compatible strings in examples kbuild: Add support to build overlays (%.dtbo) scripts: dtc: Remove the unused fdtdump.c file scripts: dtc: Build fdtoverlay tool scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9 scripts: dtc: Fetch fdtoverlay.c from external DTC project dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings dt-bindings: iio: dac: Fix AD5686 references ...
2021-02-20Merge tag 'staging-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the "big" set of staging and IIO driver patches for 5.12-rc1. Nothing really huge in here, the number of staging tree patches has gone down for a bit, maybe there's only so much churn to happen in here at the moment. The IIO changes are: - new drivers - new DT bindings - new iio driver features with full details in the shortlog. The staging driver patches are just a lot of tiny coding style cleanups, along with some semi-larger hikey driver cleanups as those are _almost_ good enough to get out of the staging tree, but will probably have to wait until 5.13 to have happen. All of these have been in linux-next with no reported issues" * tag 'staging-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (189 commits) staging: hikey9xx: Fix alignment of function parameters staging: greybus: Fixed a misspelling in hid.c staging: wimax/i2400m: fix some byte order issues found by sparse staging: wimax: i2400m: fix some incorrect type warnings staging: greybus: minor code style fix staging:wlan-ng: use memdup_user instead of kmalloc/copy_from_user staging:r8188eu: use IEEE80211_FCTL_* kernel definitions staging: rtl8192e: remove multiple blank lines staging: greybus: Fixed alignment issue in hid.c staging: wfx: remove unused included header files staging: nvec: minor coding style fix staging: wimax: Fix some coding style problem staging: fbtft: add tearing signal detect staging: vt6656: Fixed issue with alignment in rf.c staging: qlge: Remove duplicate word in comment staging: rtl8723bs: remove obsolete commented out code staging: rtl8723bs: fix function comments to follow kernel-doc staging: wfx: avoid defining array of flexible struct staging: rtl8723bs: Replace one-element array with flexible-array member in struct ndis_80211_var_ie staging: Replace lkml.org links with lore ...
2021-02-20Merge tag 'arm-dt-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC devicetree updates from Arnd Bergmann: "After the last release contained a surprising amount of new 32-bit machines, this time two thirds of the code changes are for 64-bit. The usual updates to existing files include: - Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA, nomadik, stm32, Allwinner, TI Keystone - Support for additional devices on existing machines on Renesas, SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom, ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic, Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba - Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung, stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm, i.MX, Rockchip, ASpeed, Zynq Only three new SoCs this time, but a number of boards across: Renesas: - Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based) Intel SoCFPGA: - eASIC N5X board (N5X) ST-Ericsson Ux500: - Samsung GT-I9070 (Janice) phone (u8500) TI OMAP: - MYIR Tech Limited development board (AM335X) Allwinner/sunxi: - SL631 Action Camera (V3) - PineTab Early Adopter tablet (A64) Broadcom: - BCM4906 networking chip - Netgear R8000P router (BCM4906) AMLogic: - Hardkernel ODROID-HC4 development board (SM1) - Beelink GS-King-X TV Box (S922X) Qualcomm: - Snapdragon 888 / SM8350 high-end phone SoC - Qualcomm SDX55 5G modem as standalone SoC - Snapdragon MTP reference board (SM8350) - Snapdragon MTP reference board (SDX55) - Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094) - Alcatel Idol 3 phone (MSM8916) - ASUS Zenfone 2 Laser phone (MSM8916) - BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916) - OnePlus6 phone (SDM845) - OnePlus6T phone (SDM845) - Alfa Network AP120C-AC access point (IPQ4018) NXP i.MX6 (32-bit): - Plymovent BAS base system controller for filter systems (imx6dl) - Protonic MVT industrial touchscreen terminals (imx6dl) - Protonic PRTI6G reference board (imx6ul) - Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp) NXP i.MX8 (64-bit) - Beacon i.MX8M Nano development kit (imx8mn) - Boundary Devices i.MX8MM Nitrogen SBC (imx8mm) - Gateworks Venice i.MX 8M Mini Development Kits (imx8mm) - phyBOARD-Pollux-i.MX8MP (imx8mp) - Purism Librem5 Evergreen phone (imx8mp) - Kontron SMARC-sAL28 system-on-module(imx8mp) Rockchip: - NanoPi M4B Single-board computer (RK3399) - Radxa Rock Pi E router SBC (RK3328) ASpeed: - Ampere Mt. Jade, a BMC for an x86 server (AST2500) - IBM Everest, a BMC for a Power10 server (AST2600) - Supermicro x11spi, a BMC for an ARM server (AST2500) Zynq: - Ebang EBAZ4205, FPGA board (Zynq-7000) - ZynqMP zcu104 revC reference platform (ZynqMP)" * tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits) ARM: dts: aspeed: align GPIO hog names with dtschema ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci ARM: dts: aspeed: mowgli: Add i2c rtc device ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address dt-bindings: arm: xilinx: Add missing Zturn boards ARM: dts: ebaz4205: add pinctrl entries for switches ARM: dts: add Ebang EBAZ4205 device tree dt-bindings: arm: add Ebang EBAZ4205 board dt-bindings: add ebang vendor prefix ARM: dts: aspeed: Add Everest BMC machine ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names ARM: dts: aspeed: Add Supermicro x11spi BMC machine ARM: dts: aspeed: g220a: Fix some gpio ARM: dts: aspeed: g220a: Enable ipmb ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ARM: dts: aspeed: Add LCLK to lpc-snoop ...
2021-02-03dt-bindings: iio: dac: Fix AD5686 referencesRob Herring
The example and filename use 'adi,ad5686', but the schema doesn't document it. The AD5686 is also a SPI interface variant while all the documented variants have an I2C interface. So let's update all the references to AD5686 to AD5696. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Michael Auchter <michael.auchter@ni.com> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210202215503.114113-1-robh@kernel.org
2021-01-30Merge tag 'devicetree-fixes-for-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Cleanups on properties with standard unit suffixes - Fix overwriting dma_range_map if there's no 'dma-ranges' property - Fix a bug when creating a /chosen node from ARM ATAGs - Add missing properties for TI j721e USB binding - Several doc reference updates due to DT schema conversions * tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Cleanup standard unit properties of/device: Update dma_range_map only when dev has valid dma-ranges ARM: zImage: atags_to_fdt: Fix node names on added root nodes dt-bindings: usb: j721e: add ranges and dma-coherent props dt-bindings:iio:adc: update adc.yaml reference dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references dt-bindings: display: mediatek: update mediatek,dpi.yaml reference ASoC: audio-graph-card: update audio-graph-card.yaml reference
2021-01-29dt-bindings: Cleanup standard unit propertiesRob Herring
Properties with standard unit suffixes already have a type and don't need type definitions. They also default to a single entry, so 'maxItems: 1' can be dropped. adi,ad5758 is an oddball which defined an enum of arrays. While a valid schema, it is simpler as a whole to only define scalar constraints. Cc: Jean Delvare <jdelvare@suse.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
2021-01-25dt-bindings:iio:adc: update adc.yaml referenceMauro Carvalho Chehab
Changeset b70d154d6558 ("dt-bindings:iio:adc: convert adc.txt to yaml") renamed: Documentation/devicetree/bindings/iio/adc/adc.txt to: Documentation/devicetree/bindings/iio/adc/adc.yaml. Update its cross-reference accordingly. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/8e37dba8ae9099acd649bab8a1cf718caa4f3e6a.1610535350.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-01-25Merge 5.11-rc5 into staging-nextGreg Kroah-Hartman
We need the IIO/Staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 09:20:15 +0000