summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-20dt-bindings: input: rotary-encoder: fix typoRahul Bedarkar
s/rollove/rollover/ Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-19Input: xen-kbdfront - add module parameter for setting resolutionJuergen Gross
Add a parameter for setting the resolution of xen-kbdfront in order to be able to cope with a (virtual) frame buffer of arbitrary resolution. While at it remove the pointless second reading of parameters from Xenstore in the device connection phase: all parameters are available during device probing already and that is where they should be read. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-18ARM: pxa/raumfeld: fix compile error in rotary controller resourcesDmitry Torokhov
When switching rotary controlelr from plain IRQ number to IRQ resource, I messed up the syntax. Fixes: d422be5f62ef ("Input: eeti_ts - expect platform code to set ... ") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-18Input: xpad - do not suggest writing to DominicDmitry Torokhov
Do not recommend people write to Dominic, rather everyone should be using linux-input mailing list. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: xpad - don't use literal blocks inside footnotesMauro Carvalho Chehab
Unfortunately, Sphinx (or LaTeX) can't handle literal blocks inside footnotes. So, just use normal text for the two literal code-blocks that documents the output of /sys/kernel/debug/usb/devices for xpad devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: xpad - note that usb/devices is now at /sys/kernel/debug/Mauro Carvalho Chehab
The /proc/bus/usb/devices got moved to sysfs. It is now sitting at: /sys/kernel/debug/usb/devices Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: docs - freshen up introductionDmitry Torokhov
Stop saying that API is experimental and that only USB is supported, acknowledge that evdev is the preferred interface, and remove paragraph encouraging people sending snail mail to Vojtech :) along with his email. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: docs - split input docs into kernel- and user-facingDmitry Torokhov
Split input documentation into several groups: kernel- and user-facing, and notes about individual device drivers. Move device drivers docs into a separate subdirectory. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: docs - note that MT-A protocol is obsoleteDmitry Torokhov
Everyone should be using multitouch protocol B (slotted) now. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: docs - update joystick documentation a bitDmitry Torokhov
Consolidate use instructions and userspace API notes into the same chapter; remove completely obsolete references, move into a separate subdirectory. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: docs - remove disclaimer/GPL noticeDmitry Torokhov
This is just a part of kernel documentation, it does not require explicit license notice. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: fix "Game console" heading level in joystick documentationDmitry Torokhov
The heading level should be the same as for other devices. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: rotary-encoder - remove references to platform data from docsDmitry Torokhov
The driver has been converted to use generic device properties, so stop referring to platform data. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-17Input: move documentation for Amiga CD32Dmitry Torokhov
Move the documentation for Amiga CD32 together with other parallel port joysticks. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - enable IRQ operation in F34 V7Nick Dyer
The polled firmware update proved unreliable when testing on S7817. Use attention to signal commands are complete. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - change F12 clip to inactive border debugNick Dyer
The data in F12_2D_Ctrl8 corresponds to the inactive border width used by the RMI device. It is not in pixel units and should not be treated as a clip value. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - use dev_driver_string when registering interruptNick Dyer
When IRQ handling was moved to rmi_driver in 3aeed5b the naming of the interrupt changed from "rmi4_i2c" to "2-0020" (or similar). This patch restores the previous behaviour and makes the interrupt easier to identify in /proc/interrupts. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - highlight support for AR1020Martin Kepplinger
ar1021_i2c also supports the ar1020 device I'm using. This is tested. They also share the same datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/40001393C.pdf So let users see that they have a compatible in front of them by adding AR1020 to the driver's description. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - do not force raising edge IRQ triggerDmitry Torokhov
We should not be forcing edge triggered interrupt, but rather let platform decide the kind of trigger it needs to use. Also, the driver is not quite safe with regard to edge-triggered interrupts as it does not try to kick the controller after requesting/enabling IRQ. Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - fix too long name in driver's device tableDmitry Torokhov
The name field in structure i2c_device_id is 20 characters, and we expect it to be NULL-terminated, however we are trying to stuff it with 21 bytes and thus NULL-terminator is lost. This causes issues when one creates device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C", and automatic module loading by alias does not work as result. The -I2C suffix in the device name is superfluous, we know what bus we are dealing with, so let's drop it. Also, no other driver uses capitals, and the manufacturer name is normally not included, except in very rare cases of incompatible name collisions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211 Fixes: dd4cae8bf166 ("Input: Add Microchip AR1021 i2c touchscreen") Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: ar1021_i2c - coding style fixesMartin Kepplinger
Use the common kernel coding style and corrently align parameters with open parenthesis. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: lpc32xx_ts - check for clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: imx6ul_tsc - fix error handlingFabio Estevam
If imx6ul_tsc_init() fails we should not return directly. We should disable the previously acquired clocks in this case. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: omap-keypad - fix error handling codeChristophe JAILLET
According to the previous error handling code, it is likely that 'goto err_free_keymap' is expected here in order to avoid a memory leak in error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: xpad - support some quirky Xbox One padsCameron Gutman
There are several quirky Xbox One pads that depend on initialization packets that the Microsoft pads don't require. To deal with these, I've added a mechanism for issuing device-specific initialization packets using a VID/PID-based quirks list. For the initial set of init quirks, I have added quirk handling from Valve's Steam Link xpad driver[0] and the 360Controller project[1] for macOS to enable some new pads to work properly. This should enable full functionality on the following quirky pads: 0x0e6f:0x0165 - Titanfall 2 gamepad (previously fully non-functional) 0x0f0d:0x0067 - Hori Horipad (analog sticks previously non-functional) 0x24c6:0x541a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x542a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x543a - PowerA Xbox One pad (previously fully non-functional) [0]: https://github.com/ValveSoftware/steamlink-sdk/blob/master/kernel/drivers/input/joystick/xpad.c [1]: https://github.com/360Controller/360Controller Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: yealink - define packet offset __be16 instead of u16Martin Kepplinger
sparse says warning: incorrect type in assignment (different base types) expected unsigned short [unsigned] [usertype] offset got restricted __be16 [usertype] <noident> for every usage of cpu_to_be16 in yealink.c. Defining it __be16 in the first place shouldn't hurt. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Henk.Vergonet@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: turbografx - use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: locomokbd - use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: gameport - use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: db9 - use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: soc_button_array - properly map usage 0x07/0xe3 to KEY_LEFTMETAHans de Goede
When submitting the support for the ACPI0011 windows tablet keys device I mapped the "windows" logo homekey to KEY_HOMEPAGE. But this is inconsistent with how it is done on windows tablets using the old PNP0C40 ACPI device and it does not match the HUT spec, which says that usage-page 7 usage 0xe3 is "Keyboard Left GUI". This commit maps usage-page 7 usage 0xe3 to KEY_LEFTMETA fixing this. Fixes: 4c3362f44980 ("Input: soc_button_array - add support for ACPI 6.0...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: use svg files instead of xfig in force feedback documentationMauro Carvalho Chehab
Now that the images got converted to svg, add them at the ff.rst file. NOTE: After merging upstream, the "figure" tag should be replaced by the new "kernel-figure" tag, in order for the SVG images to be included at the PDF files. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: docs - convert interactive.fig from xfig to svgMauro Carvalho Chehab
We're using svg as the standard format for vectorial images. Convert it to .svg, in a way that it is easily editable. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: docs - convert shape.fig from xfig to svgMauro Carvalho Chehab
We're using svg as the standard format for vectorial images. Convert shape.fig to .svg, in a way that it is easily editable. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: create a book with Linux Input documentationMauro Carvalho Chehab
Now that all files under Documentation/input follows the ReST markup language, rename them to *.rst and create a book for the Linux Input subsystem. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: yealink - convert documentation into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: xpad - convert documentation into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: walkera0701 - convert documentation into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: userio - convert documentation into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: sentelic - convert documentation into ReST formatMauro Carvalho Chehab
This file has its own particular format that doesn't match any markup one. Manually change it to get something that would be readable using ReST markup language. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: rotary-encoder - convert documentation into to ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: ntrig - convert documentation into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: convert keyboard notifier docs into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: convert multi-touch protocol spec into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: joystick-parport - convert documentation into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: joystick - convert documentation into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: convert joystick-api doc into ReST formatMauro Carvalho Chehab
This file require some adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: convert input-programming doc into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: iforce - convert documentation into ReST formatMauro Carvalho Chehab
This file seems to be using some other markup language, (maybe mediawiki?). Manually convert it to ReST markup, with is the one we're using along the Kernel documentaiton. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: gpio-tilt - convert documentation into ReST formatMauro Carvalho Chehab
This file require minimum adjustments to be a valid ReST file. Do it, in order to be able to parse it with Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 09:20:33 +0000