| Age | Commit message (Collapse) | Author |
|---|
|
writex() has implicit barriers, that's what makes it different from
writex_relaxed(). Therefore these calls to mmiowb() can be removed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Port 0/1 of HiP08 supports 10G and 25G. This patch adds a
change to configure NIC port speed same as that of optical
module(SFP/QFSP). Driver gets the optical module speed and
sets NIC port speed accordingly.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nicolas Dichtel says:
====================
Ease to interpret net-nsid
The goal of this series is to ease the interpretation of nsid received in
netlink messages from other netns (when the user uses
NETLINK_F_LISTEN_ALL_NSID).
After this series, with a patched iproute2:
$ ip netns add foo
$ ip netns add bar
$ touch /var/run/netns/init_net
$ mount --bind /proc/1/ns/net /var/run/netns/init_net
$ ip netns set init_net 11
$ ip netns set foo 12
$ ip netns set bar 13
$ ip netns
init_net (id: 11)
bar (id: 13)
foo (id: 12)
$ ip -n foo netns set init_net 21
$ ip -n foo netns set foo 22
$ ip -n foo netns set bar 23
$ ip -n foo netns
init_net (id: 21)
bar (id: 23)
foo (id: 22)
$ ip -n bar netns set init_net 31
$ ip -n bar netns set foo 32
$ ip -n bar netns set bar 33
$ ip -n bar netns
init_net (id: 31)
bar (id: 33)
foo (id: 32)
$ ip netns list-id target-nsid 12
nsid 21 current-nsid 11 (iproute2 netns name: init_net)
nsid 22 current-nsid 12 (iproute2 netns name: foo)
nsid 23 current-nsid 13 (iproute2 netns name: bar)
$ ip -n bar netns list-id target-nsid 32 nsid 31
nsid 21 current-nsid 31 (iproute2 netns name: init_net)
v3 -> v4:
- patch 5/5: fix imbalance lock in error path
v2 -> v3:
- patch 5/5: account NETNSA_CURRENT_NSID in rtnl_net_get_size()
v1 -> v2:
- patch 1/5: remove net from struct rtnl_net_dump_cb
- patch 2/5: new in this version
- patch 3/5: use a bool to know if rtnl_get_net_ns_capable() was called
- patch 5/5: use struct net_fill_args
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like the previous patch, the goal is to ease to convert nsids from one
netns to another netns.
A new attribute (NETNSA_CURRENT_NSID) is added to the kernel answer when
NETNSA_TARGET_NSID is provided, thus the user can easily convert nsids.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Combined with NETNSA_TARGET_NSID, it enables to "translate" a nsid from one
netns to a nsid of another netns.
This is useful when using NETLINK_F_LISTEN_ALL_NSID because it helps the
user to interpret a nsid received from an other netns.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like it was done for link and address, add the ability to perform get/dump
in another netns by specifying a target nsid attribute.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preparatory work. To avoid having to much arguments for the
function rtnl_net_fill(), a new structure is defined.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This argument is not used anymore.
Fixes: cab3c8ec8d57 ("netns: always provide the id to rtnl_net_fill()")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sudarsana Reddy Kalluru says:
====================
qed* enhancements series
The patch series add few enhancements to qed/qede drivers.
Changes from previous versions:
-------------------------------
v3: Revert v2 changes as the other paths (i.e. ptp) access the same data in
atomic context.
v2: Use __set_bit()/__clear_bit() where data access doesn't need to be
atomic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch adds driver support for MBI image update through MFW.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the case of internal reload (e.g., mtu change), there could be a race
between link-up notification from mfw and the driver unload processing. In
such case kernel assumes the link is up and starts using the queues which
leads to the server crash.
Send link notification to the kernel only when driver has already requested
MFW for the link.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The values represented by qede->flags is being used in mixed ways:
1. As 'value' at some places e.g., QEDE_FLAGS_IS_VF usage
2. As bit-mask(value) at some places e.g., QEDE_FLAGS_PTP_TX_IN_PRORGESS
usage.
This implementation pose problems in future when we want to add more flag
values e.g., overlap of the values, overflow of 64-bit storage.
Updated the implementation to go with approach (2) for qede->flags.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MFW sends UFP notifications mostly during the device init phase and PFs
might not be assigned with a name by this time. Hence capturing port-id in
the debug messages would help in finding which PF the ufp notification was
sent to.
Also, fixed a minor scemantic issue in a debug print.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Igor Russkikh says:
====================
Add support for Aquantia AQtion USB to 5/2.5GbE devices
This patchset introduces support for new multigig ethernet to USB dongle,
developed jointly by Aquantia (Phy) and ASIX (USB MAC).
The driver has similar structure with other ASIX MAC drivers (AX88179), but
with a number of important differences:
- Driver supports both direct Phy and custom firmware interface for Phy
programming. This is due to different firmware modules available with
this product.
- Driver handles new 2.5G/5G link speed configuration and reporting.
- Device support all speeds from 100M up to 5G.
- Device supports MTU up to 16K.
Device supports various standard networking features, like
checksum offloads, vlan tagging/filtering, TSO.
The code of this driver is based on original ASIX sources and was extended
by Aquantia for 5G multigig support.
Patchset v2 includes following changes:
- Function variables declarions fixed to reverse xmass tree
- Improve patch layout structure
- Remove unnecessary curly braces in switch/case statements
- Use 'packed' attribute for HW structures only
- Use eth_mac_addr function in set_mac_addr callback
- Remove unnecessary 'memset' calls.
- Read MAC address from EEPROM function has now better name
- Use driver_priv field to store context. It avoids ugly cast.
- Set max_mtu field. Remove check for MTU size
- Rewrite read/write functions. Add helpers for read/write 16/32 bit values
- Use mask and shifts instead of bitfields to support BE platforms.
- Use stack allocated buffer for configuring mcast filters
- Use AUTONEG_ENABLE when go to suspend state
- Pad out wol_cfg field from context structure. Use stack allocated instead
- Remove driver version
- Check field 'duplex' in set_link_ksetting callback as well
- Use already created defines in usb matching macro
- Rename phy_ops struct to phy_cfg
- Use ether_addr_copy for copying mac address
- Add fall-through comment in switch/case for avoid checkpatch warning
- Remove match for CDC ether device
- Add ASIX's HW id-s to match this driver
- Add all HW id-s with which driver can work to blacklist of cdc_ether driver
Patchset v3 includes following changes:
- Use linkmode_copy instead of bitmap_copy
- Remove Direct PHY access code since production HW will not have this
mode anymore
- Fix line over 80 symbols and alignments in cdc_ether patch
- Add match for ECM configuration
On start our HW reports both ECM and vendor configs.
Linux prefers to use ECM driver and chooses active configuration
which is for ecm driver (not for vendor specific).
We need to match this configuration and forcibly switch configuration
to vendor specific.
Patchset v4 includes following changes:
- Set gso_max_size.
- Optimize accessing to descriptors
- Use SKB_TRUESIZE macro.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added Aquantia and ASIX device IDs to prevent loading cdc_ether for
these devices. Our firmware reports CDC configuration simultaneously
with vendor specific.
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It enables driver for ASIX products which are also based on
aqc111/112U chips.
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement get_drvinfo, set/get_msglevel, get_link callbacks
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add full hardware initialization sequence and link configuration logic
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add helpers to write 32bit values.
Implement PHY power up/down sequences.
AQC111, PHY is being controlled via vendor command interface.
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reset, stop callbacks, driver unbind callback.
More register defines required for these callbacks.
Add helpers to read/write 16bit values
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Read/write command register defines and functions
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialize net_device_ops structure
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialize usb_driver structure skeleton
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add explaination of below counters:
TcpExtTCPRcvCoalesce
TcpExtTCPAutoCorking
TcpExtTCPOrigDataSent
TCPSynRetrans
TCPFastOpenActiveFail
TcpExtListenOverflows
TcpExtListenDrops
TcpExtTCPHystartTrainDetect
TcpExtTCPHystartTrainCwnd
TcpExtTCPHystartDelayDetect
TcpExtTCPHystartDelayCwnd
Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
mlxsw: Prepare for VLAN-aware bridge w/VxLAN
The driver is using 802.1Q filtering identifiers (FIDs) to represent the
different VLANs in the VLAN-aware bridge (only one is supported).
However, the device cannot assign a VNI to such FIDs, which prevents the
driver from supporting the enslavement of VxLAN devices to the
VLAN-aware bridge.
This patchset works around this limitation by emulating 802.1Q FIDs
using 802.1D FIDs, which can be assigned a VNI and so far have only been
used in conjunction with VLAN-unaware bridges.
The downside of this approach is that multiple {Port,VID}->FID entries
are required, whereas a single VID->FID entry is required with "true"
802.1Q FIDs.
First four patches introduce the new FID family of emulated 802.1Q FIDs
and the associated type of router interfaces (RIFs). Last patch flips
the driver to use this new FID family.
The diff is relatively small because the internal implementation of each
FID family is contained and hidden in spectrum_fid.c. Different internal
users (e.g., bridge, router) are aware of the different FID types, but
do not care about their internal implementation. This makes it trivial
to swap the current implementation of 802.1Q FIDs with the new one,
using 802.1D FIDs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace 802.1Q FIDs and VLAN RIFs with their emulated counterparts.
The emulated 802.1Q FIDs are actually 802.1D FIDs and thus use the same
flood tables, of per-FID type. Therefore, add 4K-1 entries to the
per-FID flood tables for the new FIDs and get rid of the FID-offset
flood tables that were used by the old 802.1Q FIDs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Router interfaces (RIFs) constructed on top of VLAN-aware bridges are of
"VLAN" type, whereas RIFs constructed on top of VLAN-unaware bridges of
"FID" type.
In other words, the RIF type is derived from the underlying FID type.
VLAN RIFs are used on top of 802.1Q FIDs, whereas FID RIFs are used on
top of 802.1D FIDs.
Since the previous patch emulated 802.1Q FIDs using 802.1D FIDs, this
patch emulates VLAN RIFs using FID RIFs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver uses 802.1Q FIDs when offloading a VLAN-aware bridge.
Unfortunately, it is not possible to assign a VNI to such FIDs, which
prompts the driver to forbid the enslavement of VxLAN devices to a
VLAN-aware bridge.
Workaround this hardware limitation by creating a new family of FIDs,
emulated 802.1Q FIDs. These FIDs are emulated using 802.1D FIDs, which
can be assigned a VNI.
The downside of this approach is that multiple {Port, VID}->FID entries
are required, whereas only a single VID->FID is required with "true"
802.1Q FIDs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
802.1D FIDs use a per-FID flood table, where the flood index into the
table is calculated by subtracting 4K from the FID's index.
Currently, 802.1D FIDs start at 4K, so the calculation is correct, but
if it was ever to change, the calculation will no longer be correct.
In addition, this change will allow us to reuse the flood index
calculation function in the next patch, where we are going to emulate
802.1Q FIDs using 802.1D FIDs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When configuring an FDB entry pointing to a LAG netdev (or its upper),
the driver should only set the 'lag_vid' field when the FID (filtering
identifier) is of 802.1D type.
Extend the 802.1D FID family with an attribute indicating whether this
field should be set and based on its value set the field or leave it
blank.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:260:7:
warning: variable 'err' set but not used [-Wunused-but-set-variable]
'err' should be returned while set MPI_DEINIT state fails
in hw_atl_utils_soft_reset.
Fixes: cce96d1883da ("net: aquantia: Regression on reset with 1.x firmware")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nikolay Aleksandrov says:
====================
net: bridge: add an option to disabe linklocal learning
This set adds a new bridge option which can control learning from
link-local packets, by default learning is on to be consistent and avoid
breaking users expectations. If the new no_linklocal_learn option is
enabled then the bridge will stop learning from link-local packets.
In order to save space for future boolean options, patch 01 adds a new
bool option API that uses a bitmask to control boolean options. The
bridge is by far the largest netlink attr user and we keep adding simple
boolean options which waste nl attr ids and space. We're not directly
mapping these to the in-kernel bridge flags because some might require
more complex configuration changes (e.g. if we were to add the per port
vlan stats now, it'd require multiple checks before changing value).
Any new bool option needs to be handled by both br_boolopt_toggle and get
in order to be able to retrieve its state later. All such options are
automatically exported via netlink. The behaviour of setting such
options is consistent with netlink option handling when a missing
option is being set (silently ignored), e.g. when a newer iproute2 is used
on older kernel. All supported options are exported via bm's optmask
when dumping the new attribute.
v2: address Andrew Lunn's comments, squash a minor change into patch 01,
export all supported options via optmask when dumping, add patch 03,
pass down extack so options can return meaningful errors, add
WARN_ON on unsupported options (should not happen)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have at least one bool option, we can export all of the
supported bool options via optmask when dumping them.
v2: new patch
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the new boolopt API to add an option which disables learning from
link-local packets. The default is kept as before and learning is
enabled. This is a simple map from a boolopt bit to a bridge private
flag that is tested before learning.
v2: pass NULL for extack via sysfs
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have been adding many new bridge options, a big number of which are
boolean but still take up netlink attribute ids and waste space in the skb.
Recently we discussed learning from link-local packets[1] and decided
yet another new boolean option will be needed, thus introducing this API
to save some bridge nl space.
The API supports changing the value of multiple boolean options at once
via the br_boolopt_multi struct which has an optmask (which options to
set, bit per opt) and optval (options' new values). Future boolean
options will only be added to the br_boolopt_id enum and then will have
to be handled in br_boolopt_toggle/get. The API will automatically
add the ability to change and export them via netlink, sysfs can use the
single boolopt function versions to do the same. The behaviour with
failing/succeeding is the same as with normal netlink option changing.
If an option requires mapping to internal kernel flag or needs special
configuration to be enabled then it should be handled in
br_boolopt_toggle. It should also be able to retrieve an option's current
state via br_boolopt_get.
v2: WARN_ON() on unsupported option as that shouldn't be possible and
also will help catch people who add new options without handling
them for both set and get. Pass down extack so if an option desires
it could set it on error and be more user-friendly.
[1] https://www.spinics.net/lists/netdev/msg532698.html
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tiwei Bie says:
====================
virtio: support packed ring
This patch set implements packed ring support in virtio driver.
A performance test between pktgen (pktgen_sample03_burst_single_flow.sh)
and DPDK vhost (testpmd/rxonly/vhost-PMD) has been done, I saw
~30% performance gain in packed ring in this case.
To make this patch set work with below patch set for vhost,
some hacks are needed to set the _F_NEXT flag in indirect
descriptors (this should be fixed in vhost):
https://lkml.org/lkml/2018/7/3/33
v2 -> v3:
- Use leXX instead of virtioXX (MST);
- Refactor split ring first (MST);
- Add debug helpers (MST);
- Put split/packed ring specific fields in sub structures (MST);
- Handle normal descriptors and indirect descriptors differently (MST);
- Track the DMA addr/len related info in a separate structure (MST);
- Calculate AVAIL/USED flags only when wrap counter wraps (MST);
- Define a struct/union to read event structure (MST);
- Define a macro for wrap counter bit in uapi (MST);
- Define the AVAIL/USED bits as shifts instead of values (MST);
- s/_F_/_FLAG_/ in VRING_PACKED_EVENT_* as they are values (MST);
- Drop the notify workaround for QEMU's tx-timer in packed ring (MST);
v1 -> v2:
- Use READ_ONCE() to read event off_wrap and flags together (Jason);
- Add comments related to ccw (Jason);
RFC v6 -> v1:
- Avoid extra virtio_wmb() in virtqueue_enable_cb_delayed_packed()
when event idx is off (Jason);
- Fix bufs calculation in virtqueue_enable_cb_delayed_packed() (Jason);
- Test the state of the desc at used_idx instead of last_used_idx
in virtqueue_enable_cb_delayed_packed() (Jason);
- Save wrap counter (as part of queue state) in the return value
of virtqueue_enable_cb_prepare_packed();
- Refine the packed ring definitions in uapi;
- Rebase on the net-next tree;
RFC v5 -> RFC v6:
- Avoid tracking addr/len/flags when DMA API isn't used (MST/Jason);
- Define wrap counter as bool (Jason);
- Use ALIGN() in vring_init_packed() (Jason);
- Avoid using pointer to track `next` in detach_buf_packed() (Jason);
- Add comments for barriers (Jason);
- Don't enable RING_PACKED on ccw for now (noticed by Jason);
- Refine the memory barrier in virtqueue_poll();
- Add a missing memory barrier in virtqueue_enable_cb_delayed_packed();
- Remove the hacks in virtqueue_enable_cb_prepare_packed();
RFC v4 -> RFC v5:
- Save DMA addr, etc in desc state (Jason);
- Track used wrap counter;
RFC v3 -> RFC v4:
- Make ID allocation support out-of-order (Jason);
- Various fixes for EVENT_IDX support;
RFC v2 -> RFC v3:
- Split into small patches (Jason);
- Add helper virtqueue_use_indirect() (Jason);
- Just set id for the last descriptor of a list (Jason);
- Calculate the prev in virtqueue_add_packed() (Jason);
- Fix/improve desc suppression code (Jason/MST);
- Refine the code layout for XXX_split/packed and wrappers (MST);
- Fix the comments and API in uapi (MST);
- Remove the BUG_ON() for indirect (Jason);
- Some other refinements and bug fixes;
RFC v1 -> RFC v2:
- Add indirect descriptor support - compile test only;
- Add event suppression supprt - compile test only;
- Move vring_packed_init() out of uapi (Jason, MST);
- Merge two loops into one in virtqueue_add_packed() (Jason);
- Split vring_unmap_one() for packed ring and split ring (Jason);
- Avoid using '%' operator (Jason);
- Rename free_head -> next_avail_idx (Jason);
- Add comments for virtio_wmb() in virtqueue_add_packed() (Jason);
- Some other refinements and bug fixes;
====================
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Advertize the packed ring layout support.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, ccw, vop and remoteproc need some legacy virtio
APIs to create or access virtio rings, which are not supported
by packed ring. So disable packed ring on these transports
for now.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
