summaryrefslogtreecommitdiff
path: root/sound/soc/pxa/pxa2xx-ac97.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/pxa/pxa2xx-ac97.c')
-rw-r--r--sound/soc/pxa/pxa2xx-ac97.c431
1 files changed, 431 insertions, 0 deletions
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
new file mode 100644
index 000000000000..1bbbeff84ef0
--- /dev/null
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -0,0 +1,431 @@
+/*
+ * linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
+ *
+ * Author: Nicolas Pitre
+ * Created: Dec 02, 2004
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <asm/irq.h>
+#include <linux/mutex.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/audio.h>
+
+#include "pxa2xx-pcm.h"
+#include "pxa2xx-ac97.h"
+
+static DEFINE_MUTEX(car_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
+static volatile long gsr_bits;
+
+/*
+ * Beware PXA27x bugs:
+ *
+ * o Slot 12 read from modem space will hang controller.
+ * o CDONE, SDONE interrupt fails after any slot 12 IO.
+ *
+ * We therefore have an hybrid approach for waiting on SDONE (interrupt or
+ * 1 jiffy timeout if interrupt never comes).
+ */
+
+static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ unsigned short val = -1;
+ volatile u32 *reg_addr;
+
+ mutex_lock(&car_mutex);
+
+ /* set up primary or secondary codec/modem space */
+#ifdef CONFIG_PXA27x
+ reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+#else
+ if (reg == AC97_GPIO_STATUS)
+ reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
+ else
+ reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+#endif
+ reg_addr += (reg >> 1);
+
+#ifndef CONFIG_PXA27x
+ if (reg == AC97_GPIO_STATUS) {
+ /* read from controller cache */
+ val = *reg_addr;
+ goto out;
+ }
+#endif
+
+ /* start read access across the ac97 link */
+ GSR = GSR_CDONE | GSR_SDONE;
+ gsr_bits = 0;
+ val = *reg_addr;
+
+ wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
+ if (!((GSR | gsr_bits) & GSR_SDONE)) {
+ printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n",
+ __FUNCTION__, reg, GSR | gsr_bits);
+ val = -1;
+ goto out;
+ }
+
+ /* valid data now */
+ GSR = GSR_CDONE | GSR_SDONE;
+ gsr_bits = 0;
+ val = *reg_addr;
+ /* but we've just started another cycle... */
+ wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
+
+out: mutex_unlock(&car_mutex);
+ return val;
+}
+
+static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
+{
+ volatile u32 *reg_addr;
+
+ mutex_lock(&car_mutex);
+
+ /* set up primary or secondary codec/modem space */
+#ifdef CONFIG_PXA27x
+ reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+#else
+ if (reg == AC97_GPIO_STATUS)
+ reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
+ else
+ reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+#endif
+ reg_addr += (reg >> 1);
+
+ GSR = GSR_CDONE | GSR_SDONE;
+ gsr_bits = 0;
+ *reg_addr = val;
+ wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1);
+ if (!((GSR | gsr_bits) & GSR_CDONE))
+ printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n",
+ __FUNCTION__, reg, GSR | gsr_bits);
+
+ mutex_unlock(&car_mutex);
+}
+
+static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ gsr_bits = 0;
+
+#ifdef CONFIG_PXA27x
+ /* warm reset broken on Bulverde,
+ so manually keep AC97 reset high */
+ pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
+ udelay(10);
+ GCR |= GCR_WARM_RST;
+ pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+ udelay(500);
+#else
+ GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
+ wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+#endif
+
+ if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
+ printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
+ __FUNCTION__, gsr_bits);
+
+ GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+ GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
+}
+
+static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+ GCR &= GCR_COLD_RST; /* clear everything but nCRST */
+ GCR &= ~GCR_COLD_RST; /* then assert nCRST */
+
+ gsr_bits = 0;
+#ifdef CONFIG_PXA27x
+ /* PXA27x Developers Manual section 13.5.2.2.1 */
+ pxa_set_cken(1 << 31, 1);
+ udelay(5);
+ pxa_set_cken(1 << 31, 0);
+ GCR = GCR_COLD_RST;
+ udelay(50);
+#else
+ GCR = GCR_COLD_RST;
+ GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
+ wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+#endif
+
+ if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
+ printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
+ __FUNCTION__, gsr_bits);
+
+ GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+ GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
+}
+
+static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
+{
+ long status;
+
+ status = GSR;
+ if (status) {
+ GSR = status;
+ gsr_bits |= status;
+ wake_up(&gsr_wq);
+
+#ifdef CONFIG_PXA27x
+ /* Although we don't use those we still need to clear them
+ since they tend to spuriously trigger when MMC is used
+ (hardware bug? go figure)... */
+ MISR = MISR_EOC;
+ PISR = PISR_EOC;
+ MCSR = MCSR_EOC;
+#endif
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+ .read = pxa2xx_ac97_read,
+ .write = pxa2xx_ac97_write,
+ .warm_reset = pxa2xx_ac97_warm_reset,
+ .reset = pxa2xx_ac97_cold_reset,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
+ .name = "AC97 PCM Stereo out",
+ .dev_addr = __PREG(PCDR),
+ .drcmr = &DRCMRTXPCDR,
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST32 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
+ .name = "AC97 PCM Stereo in",
+ .dev_addr = __PREG(PCDR),
+ .drcmr = &DRCMRRXPCDR,
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST32 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
+ .name = "AC97 Aux PCM (Slot 5) Mono out",
+ .dev_addr = __PREG(MODR),
+ .drcmr = &DRCMRTXMODR,
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
+ .name = "AC97 Aux PCM (Slot 5) Mono in",
+ .dev_addr = __PREG(MODR),
+ .drcmr = &DRCMRRXMODR,
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
+ .name = "AC97 Mic PCM (Slot 6) Mono in",
+ .dev_addr = __PREG(MCDR),
+ .drcmr = &DRCMRRXMCDR,
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+#ifdef CONFIG_PM
+static int pxa2xx_ac97_suspend(struct platform_device *pdev,
+ struct snd_soc_cpu_dai *dai)
+{
+ GCR |= GCR_ACLINK_OFF;
+ pxa_set_cken(CKEN2_AC97, 0);
+ return 0;
+}
+
+static int pxa2xx_ac97_resume(struct platform_device *pdev,
+ struct snd_soc_cpu_dai *dai)
+{
+ pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
+ pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
+ pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
+ pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
+#ifdef CONFIG_PXA27x
+ /* Use GPIO 113 as AC97 Reset on Bulverde */
+ pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+#endif
+ pxa_set_cken(CKEN2_AC97, 1);
+ return 0;
+}
+
+#else
+#define pxa2xx_ac97_suspend NULL
+#define pxa2xx_ac97_resume NULL
+#endif
+
+static int pxa2xx_ac97_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
+ if (ret < 0)
+ goto err;
+
+ pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
+ pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
+ pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
+ pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
+#ifdef CONFIG_PXA27x
+ /* Use GPIO 113 as AC97 Reset on Bulverde */
+ pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+#endif
+ pxa_set_cken(CKEN2_AC97, 1);
+ return 0;
+
+ err:
+ if (CKEN & CKEN2_AC97) {
+ GCR |= GCR_ACLINK_OFF;
+ free_irq(IRQ_AC97, NULL);
+ pxa_set_cken(CKEN2_AC97, 0);
+ }
+ return ret;
+}
+
+static void pxa2xx_ac97_remove(struct platform_device *pdev)
+{
+ GCR |= GCR_ACLINK_OFF;
+ free_irq(IRQ_AC97, NULL);
+ pxa_set_cken(CKEN2_AC97, 0);
+}
+
+static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_out;
+ else
+ cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_in;
+
+ return 0;
+}
+
+static int pxa2xx_ac97_hw_aux_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_out;
+ else
+ cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_in;
+
+ return 0;
+}
+
+static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ return -ENODEV;
+ else
+ cpu_dai->dma_data = &pxa2xx_ac97_pcm_mic_mono_in;
+
+ return 0;
+}
+
+#define PXA2XX_AC97_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000)
+
+/*
+ * There is only 1 physical AC97 interface for pxa2xx, but it
+ * has extra fifo's that can be used for aux DACs and ADCs.
+ */
+struct snd_soc_cpu_dai pxa_ac97_dai[] = {
+{
+ .name = "pxa2xx-ac97",
+ .id = 0,
+ .type = SND_SOC_DAI_AC97,
+ .probe = pxa2xx_ac97_probe,
+ .remove = pxa2xx_ac97_remove,
+ .suspend = pxa2xx_ac97_suspend,
+ .resume = pxa2xx_ac97_resume,
+ .playback = {
+ .stream_name = "AC97 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = PXA2XX_AC97_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .stream_name = "AC97 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = PXA2XX_AC97_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .ops = {
+ .hw_params = pxa2xx_ac97_hw_params,},
+},
+{
+ .name = "pxa2xx-ac97-aux",
+ .id = 1,
+ .type = SND_SOC_DAI_AC97,
+ .playback = {
+ .stream_name = "AC97 Aux Playback",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = PXA2XX_AC97_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .stream_name = "AC97 Aux Capture",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = PXA2XX_AC97_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .ops = {
+ .hw_params = pxa2xx_ac97_hw_aux_params,},
+},
+{
+ .name = "pxa2xx-ac97-mic",
+ .id = 2,
+ .type = SND_SOC_DAI_AC97,
+ .capture = {
+ .stream_name = "AC97 Mic Capture",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = PXA2XX_AC97_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .ops = {
+ .hw_params = pxa2xx_ac97_hw_mic_params,},
+},
+};
+
+EXPORT_SYMBOL_GPL(pxa_ac97_dai);
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
+MODULE_LICENSE("GPL");