diff options
Diffstat (limited to 'sound/soc/imx/mx27vis_wm8974.c')
-rw-r--r-- | sound/soc/imx/mx27vis_wm8974.c | 318 |
1 files changed, 0 insertions, 318 deletions
diff --git a/sound/soc/imx/mx27vis_wm8974.c b/sound/soc/imx/mx27vis_wm8974.c deleted file mode 100644 index 07d2a248438c..000000000000 --- a/sound/soc/imx/mx27vis_wm8974.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * mx27vis_wm8974.c -- SoC audio for mx27vis - * - * Copyright 2009 Vista Silicon S.L. - * Author: Javier Martin - * javier.martin@vista-silicon.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/device.h> -#include <linux/i2c.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - - -#include "../codecs/wm8974.h" -#include "mx1_mx2-pcm.h" -#include "mxc-ssi.h" -#include <mach/gpio.h> -#include <mach/iomux.h> - -#define IGNORED_ARG 0 - - -static struct snd_soc_card mx27vis; - -/** - * This function connects SSI1 (HPCR1) as slave to - * SSI1 external signals (PPCR1) - * As slave, HPCR1 must set TFSDIR and TCLKDIR as inputs from - * port 4 - */ -void audmux_connect_1_4(void) -{ - pr_debug("AUDMUX: normal operation mode\n"); - /* Reset HPCR1 and PPCR1 */ - - DAM_HPCR1 = 0x00000000; - DAM_PPCR1 = 0x00000000; - - /* set to synchronous */ - DAM_HPCR1 |= AUDMUX_HPCR_SYN; - DAM_PPCR1 |= AUDMUX_PPCR_SYN; - - - /* set Rx sources 1 <--> 4 */ - DAM_HPCR1 |= AUDMUX_HPCR_RXDSEL(3); /* port 4 */ - DAM_PPCR1 |= AUDMUX_PPCR_RXDSEL(0); /* port 1 */ - - /* set Tx frame and Clock direction and source 4 --> 1 output */ - DAM_HPCR1 |= AUDMUX_HPCR_TFSDIR | AUDMUX_HPCR_TCLKDIR; - DAM_HPCR1 |= AUDMUX_HPCR_TFCSEL(3); /* TxDS and TxCclk from port 4 */ - - return; -} - -static int mx27vis_hifi_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - unsigned int pll_out = 0, bclk = 0, fmt = 0, mclk = 0; - int ret = 0; - - /* - * The WM8974 is better at generating accurate audio clocks than the - * MX27 SSI controller, so we will use it as master when we can. - */ - switch (params_rate(params)) { - case 8000: - fmt = SND_SOC_DAIFMT_CBM_CFM; - mclk = WM8974_MCLKDIV_12; - pll_out = 24576000; - break; - case 16000: - fmt = SND_SOC_DAIFMT_CBM_CFM; - pll_out = 12288000; - break; - case 48000: - fmt = SND_SOC_DAIFMT_CBM_CFM; - bclk = WM8974_BCLKDIV_4; - pll_out = 12288000; - break; - case 96000: - fmt = SND_SOC_DAIFMT_CBM_CFM; - bclk = WM8974_BCLKDIV_2; - pll_out = 12288000; - break; - case 11025: - fmt = SND_SOC_DAIFMT_CBM_CFM; - bclk = WM8974_BCLKDIV_16; - pll_out = 11289600; - break; - case 22050: - fmt = SND_SOC_DAIFMT_CBM_CFM; - bclk = WM8974_BCLKDIV_8; - pll_out = 11289600; - break; - case 44100: - fmt = SND_SOC_DAIFMT_CBM_CFM; - bclk = WM8974_BCLKDIV_4; - mclk = WM8974_MCLKDIV_2; - pll_out = 11289600; - break; - case 88200: - fmt = SND_SOC_DAIFMT_CBM_CFM; - bclk = WM8974_BCLKDIV_2; - pll_out = 11289600; - break; - } - - /* set codec DAI configuration */ - ret = codec_dai->ops->set_fmt(codec_dai, - SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF | - SND_SOC_DAIFMT_SYNC | fmt); - if (ret < 0) { - printk(KERN_ERR "Error from codec DAI configuration\n"); - return ret; - } - - /* set cpu DAI configuration */ - ret = cpu_dai->ops->set_fmt(cpu_dai, - SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_SYNC | fmt); - if (ret < 0) { - printk(KERN_ERR "Error from cpu DAI configuration\n"); - return ret; - } - - /* Put DC field of STCCR to 1 (not zero) */ - ret = cpu_dai->ops->set_tdm_slot(cpu_dai, 0, 2); - - /* set the SSI system clock as input */ - ret = cpu_dai->ops->set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0, - SND_SOC_CLOCK_IN); - if (ret < 0) { - printk(KERN_ERR "Error when setting system SSI clk\n"); - return ret; - } - - /* set codec BCLK division for sample rate */ - ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_BCLKDIV, bclk); - if (ret < 0) { - printk(KERN_ERR "Error when setting BCLK division\n"); - return ret; - } - - - /* codec PLL input is 25 MHz */ - ret = codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, IGNORED_ARG, - 25000000, pll_out); - if (ret < 0) { - printk(KERN_ERR "Error when setting PLL input\n"); - return ret; - } - - /*set codec MCLK division for sample rate */ - ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_MCLKDIV, mclk); - if (ret < 0) { - printk(KERN_ERR "Error when setting MCLK division\n"); - return ret; - } - - return 0; -} - -static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - - /* disable the PLL */ - return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, IGNORED_ARG, - 0, 0); -} - -/* - * mx27vis WM8974 HiFi DAI opserations. - */ -static struct snd_soc_ops mx27vis_hifi_ops = { - .hw_params = mx27vis_hifi_hw_params, - .hw_free = mx27vis_hifi_hw_free, -}; - - -static int mx27vis_suspend(struct platform_device *pdev, pm_message_t state) -{ - return 0; -} - -static int mx27vis_resume(struct platform_device *pdev) -{ - return 0; -} - -static int mx27vis_probe(struct platform_device *pdev) -{ - int ret = 0; - - ret = get_ssi_clk(0, &pdev->dev); - - if (ret < 0) { - printk(KERN_ERR "%s: cant get ssi clock\n", __func__); - return ret; - } - - - return 0; -} - -static int mx27vis_remove(struct platform_device *pdev) -{ - put_ssi_clk(0); - return 0; -} - -static struct snd_soc_dai_link mx27vis_dai[] = { -{ /* Hifi Playback*/ - .name = "WM8974", - .stream_name = "WM8974 HiFi", - .cpu_dai = &imx_ssi_pcm_dai[0], - .codec_dai = &wm8974_dai, - .ops = &mx27vis_hifi_ops, -}, -}; - -static struct snd_soc_card mx27vis = { - .name = "mx27vis", - .platform = &mx1_mx2_soc_platform, - .probe = mx27vis_probe, - .remove = mx27vis_remove, - .suspend_pre = mx27vis_suspend, - .resume_post = mx27vis_resume, - .dai_link = mx27vis_dai, - .num_links = ARRAY_SIZE(mx27vis_dai), -}; - -static struct snd_soc_device mx27vis_snd_devdata = { - .card = &mx27vis, - .codec_dev = &soc_codec_dev_wm8974, -}; - -static struct platform_device *mx27vis_snd_device; - -/* Temporal definition of board specific behaviour */ -void gpio_ssi_active(int ssi_num) -{ - int ret = 0; - - unsigned int ssi1_pins[] = { - PC20_PF_SSI1_FS, - PC21_PF_SSI1_RXD, - PC22_PF_SSI1_TXD, - PC23_PF_SSI1_CLK, - }; - unsigned int ssi2_pins[] = { - PC24_PF_SSI2_FS, - PC25_PF_SSI2_RXD, - PC26_PF_SSI2_TXD, - PC27_PF_SSI2_CLK, - }; - if (ssi_num == 0) - ret = mxc_gpio_setup_multiple_pins(ssi1_pins, - ARRAY_SIZE(ssi1_pins), "USB OTG"); - else - ret = mxc_gpio_setup_multiple_pins(ssi2_pins, - ARRAY_SIZE(ssi2_pins), "USB OTG"); - if (ret) - printk(KERN_ERR "Error requesting ssi %x pins\n", ssi_num); -} - - -static int __init mx27vis_init(void) -{ - int ret; - - mx27vis_snd_device = platform_device_alloc("soc-audio", -1); - if (!mx27vis_snd_device) - return -ENOMEM; - - platform_set_drvdata(mx27vis_snd_device, &mx27vis_snd_devdata); - mx27vis_snd_devdata.dev = &mx27vis_snd_device->dev; - ret = platform_device_add(mx27vis_snd_device); - - if (ret) { - printk(KERN_ERR "ASoC: Platform device allocation failed\n"); - platform_device_put(mx27vis_snd_device); - } - - /* WM8974 uses SSI1 (HPCR1) via AUDMUX port 4 for audio (PPCR1) */ - gpio_ssi_active(0); - audmux_connect_1_4(); - - return ret; -} - -static void __exit mx27vis_exit(void) -{ - /* We should call some "ssi_gpio_inactive()" properly */ -} - -module_init(mx27vis_init); -module_exit(mx27vis_exit); - - -MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com"); -MODULE_DESCRIPTION("ALSA SoC WM8974 mx27vis"); -MODULE_LICENSE("GPL"); |