diff options
Diffstat (limited to 'sound/soc/codecs/wcd-mbhc-v2.c')
| -rw-r--r-- | sound/soc/codecs/wcd-mbhc-v2.c | 1475 |
1 files changed, 1475 insertions, 0 deletions
diff --git a/sound/soc/codecs/wcd-mbhc-v2.c b/sound/soc/codecs/wcd-mbhc-v2.c new file mode 100644 index 000000000000..405128ccb4b0 --- /dev/null +++ b/sound/soc/codecs/wcd-mbhc-v2.c @@ -0,0 +1,1475 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2015-2021, The Linux Foundation. All rights reserved. + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/printk.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <sound/soc.h> +#include <sound/jack.h> +#include "wcd-mbhc-v2.h" + +#define HS_DETECT_PLUG_TIME_MS (3 * 1000) +#define MBHC_BUTTON_PRESS_THRESHOLD_MIN 250 +#define GND_MIC_SWAP_THRESHOLD 4 +#define WCD_FAKE_REMOVAL_MIN_PERIOD_MS 100 +#define HPHL_CROSS_CONN_THRESHOLD 100 +#define HS_VREF_MIN_VAL 1400 +#define FAKE_REM_RETRY_ATTEMPTS 3 +#define WCD_MBHC_ADC_HS_THRESHOLD_MV 1700 +#define WCD_MBHC_ADC_HPH_THRESHOLD_MV 75 +#define WCD_MBHC_ADC_MICBIAS_MV 1800 +#define WCD_MBHC_FAKE_INS_RETRY 4 + +#define WCD_MBHC_JACK_MASK (SND_JACK_HEADSET | SND_JACK_LINEOUT | \ + SND_JACK_MECHANICAL) + +#define WCD_MBHC_JACK_BUTTON_MASK (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \ + SND_JACK_BTN_2 | SND_JACK_BTN_3 | \ + SND_JACK_BTN_4 | SND_JACK_BTN_5) + +enum wcd_mbhc_adc_mux_ctl { + MUX_CTL_AUTO = 0, + MUX_CTL_IN2P, + MUX_CTL_IN3P, + MUX_CTL_IN4P, + MUX_CTL_HPH_L, + MUX_CTL_HPH_R, + MUX_CTL_NONE, +}; + +struct wcd_mbhc { + struct device *dev; + struct snd_soc_component *component; + struct snd_soc_jack *jack; + struct wcd_mbhc_config *cfg; + const struct wcd_mbhc_cb *mbhc_cb; + const struct wcd_mbhc_intr *intr_ids; + struct wcd_mbhc_field *fields; + /* Delayed work to report long button press */ + struct delayed_work mbhc_btn_dwork; + /* Work to correct accessory type */ + struct work_struct correct_plug_swch; + struct mutex lock; + int buttons_pressed; + u32 hph_status; /* track headhpone status */ + u8 current_plug; + bool is_btn_press; + bool in_swch_irq_handler; + bool hs_detect_work_stop; + bool is_hs_recording; + bool extn_cable_hph_rem; + bool force_linein; + bool impedance_detect; + unsigned long event_state; + unsigned long jiffies_atreport; + /* impedance of hphl and hphr */ + uint32_t zl, zr; + /* Holds type of Headset - Mono/Stereo */ + enum wcd_mbhc_hph_type hph_type; + /* Holds mbhc detection method - ADC/Legacy */ + int mbhc_detection_logic; +}; + +static inline int wcd_mbhc_write_field(const struct wcd_mbhc *mbhc, + int field, int val) +{ + if (!mbhc->fields[field].reg) + return 0; + + return snd_soc_component_write_field(mbhc->component, + mbhc->fields[field].reg, + mbhc->fields[field].mask, val); +} + +static inline int wcd_mbhc_read_field(const struct wcd_mbhc *mbhc, int field) +{ + if (!mbhc->fields[field].reg) + return 0; + + return snd_soc_component_read_field(mbhc->component, + mbhc->fields[field].reg, + mbhc->fields[field].mask); +} + +static void wcd_program_hs_vref(struct wcd_mbhc *mbhc) +{ + u32 reg_val = ((mbhc->cfg->v_hs_max - HS_VREF_MIN_VAL) / 100); + + wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_VREF, reg_val); +} + +static void wcd_program_btn_threshold(const struct wcd_mbhc *mbhc, bool micbias) +{ + struct snd_soc_component *component = mbhc->component; + + mbhc->mbhc_cb->set_btn_thr(component, mbhc->cfg->btn_low, + mbhc->cfg->btn_high, + mbhc->cfg->num_btn, micbias); +} + +static void wcd_mbhc_curr_micbias_control(const struct wcd_mbhc *mbhc, + const enum wcd_mbhc_cs_mb_en_flag cs_mb_en) +{ + + /* + * Some codecs handle micbias/pullup enablement in codec + * drivers itself and micbias is not needed for regular + * plug type detection. So if micbias_control callback function + * is defined, just return. + */ + if (mbhc->mbhc_cb->mbhc_micbias_control) + return; + + switch (cs_mb_en) { + case WCD_MBHC_EN_CS: + wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3); + /* Program Button threshold registers as per CS */ + wcd_program_btn_threshold(mbhc, false); + break; + case WCD_MBHC_EN_MB: + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1); + /* Disable PULL_UP_EN & enable MICBIAS */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 2); + /* Program Button threshold registers as per MICBIAS */ + wcd_program_btn_threshold(mbhc, true); + break; + case WCD_MBHC_EN_PULLUP: + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3); + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1); + wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 1); + /* Program Button threshold registers as per MICBIAS */ + wcd_program_btn_threshold(mbhc, true); + break; + case WCD_MBHC_EN_NONE: + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1); + wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0); + break; + default: + dev_err(mbhc->dev, "%s: Invalid parameter", __func__); + break; + } +} + +int wcd_mbhc_event_notify(struct wcd_mbhc *mbhc, unsigned long event) +{ + + struct snd_soc_component *component; + bool micbias2 = false; + + if (!mbhc) + return 0; + + component = mbhc->component; + + if (mbhc->mbhc_cb->micbias_enable_status) + micbias2 = mbhc->mbhc_cb->micbias_enable_status(component, MIC_BIAS_2); + + switch (event) { + /* MICBIAS usage change */ + case WCD_EVENT_POST_DAPM_MICBIAS_2_ON: + mbhc->is_hs_recording = true; + break; + case WCD_EVENT_POST_MICBIAS_2_ON: + /* Disable current source if micbias2 enabled */ + if (mbhc->mbhc_cb->mbhc_micbias_control) { + if (wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN)) + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0); + } else { + mbhc->is_hs_recording = true; + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB); + } + break; + case WCD_EVENT_PRE_MICBIAS_2_OFF: + /* + * Before MICBIAS_2 is turned off, if FSM is enabled, + * make sure current source is enabled so as to detect + * button press/release events + */ + if (mbhc->mbhc_cb->mbhc_micbias_control/* && !mbhc->micbias_enable*/) { + if (wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN)) + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3); + } + break; + /* MICBIAS usage change */ + case WCD_EVENT_POST_DAPM_MICBIAS_2_OFF: + mbhc->is_hs_recording = false; + break; + case WCD_EVENT_POST_MICBIAS_2_OFF: + if (!mbhc->mbhc_cb->mbhc_micbias_control) + mbhc->is_hs_recording = false; + + /* Enable PULL UP if PA's are enabled */ + if ((test_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state)) || + (test_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state))) + /* enable pullup and cs, disable mb */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP); + else + /* enable current source and disable mb, pullup*/ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS); + + break; + case WCD_EVENT_POST_HPHL_PA_OFF: + clear_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state); + + /* check if micbias is enabled */ + if (micbias2) + /* Disable cs, pullup & enable micbias */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB); + else + /* Disable micbias, pullup & enable cs */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS); + break; + case WCD_EVENT_POST_HPHR_PA_OFF: + clear_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state); + /* check if micbias is enabled */ + if (micbias2) + /* Disable cs, pullup & enable micbias */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB); + else + /* Disable micbias, pullup & enable cs */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS); + break; + case WCD_EVENT_PRE_HPHL_PA_ON: + set_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state); + /* check if micbias is enabled */ + if (micbias2) + /* Disable cs, pullup & enable micbias */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB); + else + /* Disable micbias, enable pullup & cs */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP); + break; + case WCD_EVENT_PRE_HPHR_PA_ON: + set_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state); + /* check if micbias is enabled */ + if (micbias2) + /* Disable cs, pullup & enable micbias */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB); + else + /* Disable micbias, enable pullup & cs */ + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP); + break; + default: + break; + } + return 0; +} +EXPORT_SYMBOL_GPL(wcd_mbhc_event_notify); + +static int wcd_cancel_btn_work(struct wcd_mbhc *mbhc) +{ + return cancel_delayed_work_sync(&mbhc->mbhc_btn_dwork); +} + +static void wcd_micbias_disable(struct wcd_mbhc *mbhc) +{ + struct snd_soc_component *component = mbhc->component; + + if (mbhc->mbhc_cb->mbhc_micbias_control) + mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2, MICB_DISABLE); + + if (mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic) + mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic(component, MIC_BIAS_2, false); + + if (mbhc->mbhc_cb->set_micbias_value) { + mbhc->mbhc_cb->set_micbias_value(component); + wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0); + } +} + +static void wcd_mbhc_report_plug_removal(struct wcd_mbhc *mbhc, + enum snd_jack_types jack_type) +{ + mbhc->hph_status &= ~jack_type; + /* + * cancel possibly scheduled btn work and + * report release if we reported button press + */ + if (!wcd_cancel_btn_work(mbhc) && mbhc->buttons_pressed) { + snd_soc_jack_report(mbhc->jack, 0, mbhc->buttons_pressed); + mbhc->buttons_pressed &= ~WCD_MBHC_JACK_BUTTON_MASK; + } + + wcd_micbias_disable(mbhc); + mbhc->hph_type = WCD_MBHC_HPH_NONE; + mbhc->zl = mbhc->zr = 0; + snd_soc_jack_report(mbhc->jack, mbhc->hph_status, WCD_MBHC_JACK_MASK); + mbhc->current_plug = MBHC_PLUG_TYPE_NONE; + mbhc->force_linein = false; +} + +static void wcd_mbhc_compute_impedance(struct wcd_mbhc *mbhc) +{ + + if (!mbhc->impedance_detect) + return; + + if (mbhc->cfg->linein_th != 0) { + u8 fsm_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN); + /* Set MUX_CTL to AUTO for Z-det */ + + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_AUTO); + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1); + mbhc->mbhc_cb->compute_impedance(mbhc->component, &mbhc->zl, &mbhc->zr); + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, fsm_en); + } +} + +static void wcd_mbhc_report_plug_insertion(struct wcd_mbhc *mbhc, + enum snd_jack_types jack_type) +{ + bool is_pa_on; + /* + * Report removal of current jack type. + * Headphone to headset shouldn't report headphone + * removal. + */ + if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET && + jack_type == SND_JACK_HEADPHONE) + mbhc->hph_status &= ~SND_JACK_HEADSET; + + /* Report insertion */ + switch (jack_type) { + case SND_JACK_HEADPHONE: + mbhc->current_plug = MBHC_PLUG_TYPE_HEADPHONE; + break; + case SND_JACK_HEADSET: + mbhc->current_plug = MBHC_PLUG_TYPE_HEADSET; + mbhc->jiffies_atreport = jiffies; + break; + case SND_JACK_LINEOUT: + mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH; + break; + default: + break; + } + + + is_pa_on = wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN); + + if (!is_pa_on) { + wcd_mbhc_compute_impedance(mbhc); + if ((mbhc->zl > mbhc->cfg->linein_th) && + (mbhc->zr > mbhc->cfg->linein_th) && + (jack_type == SND_JACK_HEADPHONE)) { + jack_type = SND_JACK_LINEOUT; + mbhc->force_linein = true; + mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH; + if (mbhc->hph_status) { + mbhc->hph_status &= ~(SND_JACK_HEADSET | + SND_JACK_LINEOUT); + snd_soc_jack_report(mbhc->jack, mbhc->hph_status, + WCD_MBHC_JACK_MASK); + } + } + } + + /* Do not calculate impedance again for lineout + * as during playback pa is on and impedance values + * will not be correct resulting in lineout detected + * as headphone. + */ + if (is_pa_on && mbhc->force_linein) { + jack_type = SND_JACK_LINEOUT; + mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH; + if (mbhc->hph_status) { + mbhc->hph_status &= ~(SND_JACK_HEADSET | + SND_JACK_LINEOUT); + snd_soc_jack_report(mbhc->jack, mbhc->hph_status, + WCD_MBHC_JACK_MASK); + } + } + + mbhc->hph_status |= jack_type; + + if (jack_type == SND_JACK_HEADPHONE && mbhc->mbhc_cb->mbhc_micb_ramp_control) + mbhc->mbhc_cb->mbhc_micb_ramp_control(mbhc->component, false); + + snd_soc_jack_report(mbhc->jack, (mbhc->hph_status | SND_JACK_MECHANICAL), + WCD_MBHC_JACK_MASK); +} + +static void wcd_mbhc_report_plug(struct wcd_mbhc *mbhc, int insertion, + enum snd_jack_types jack_type) +{ + + WARN_ON(!mutex_is_locked(&mbhc->lock)); + + if (!insertion) /* Report removal */ + wcd_mbhc_report_plug_removal(mbhc, jack_type); + else + wcd_mbhc_report_plug_insertion(mbhc, jack_type); + +} + +static void wcd_cancel_hs_detect_plug(struct wcd_mbhc *mbhc, + struct work_struct *work) +{ + mbhc->hs_detect_work_stop = true; + mutex_unlock(&mbhc->lock); + cancel_work_sync(work); + mutex_lock(&mbhc->lock); +} + +static void wcd_mbhc_cancel_pending_work(struct wcd_mbhc *mbhc) +{ + /* cancel pending button press */ + wcd_cancel_btn_work(mbhc); + /* cancel correct work function */ + wcd_cancel_hs_detect_plug(mbhc, &mbhc->correct_plug_swch); +} + +static void wcd_mbhc_elec_hs_report_unplug(struct wcd_mbhc *mbhc) +{ + wcd_mbhc_cancel_pending_work(mbhc); + /* Report extension cable */ + wcd_mbhc_report_plug(mbhc, 1, SND_JACK_LINEOUT); + /* + * Disable HPHL trigger and MIC Schmitt triggers. + * Setup for insertion detection. + */ + disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr); + wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_NONE); + /* Disable HW FSM */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 3); + + /* Set the detection type appropriately */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_DETECTION_TYPE, 1); + enable_irq(mbhc->intr_ids->mbhc_hs_ins_intr); +} + +static void wcd_mbhc_find_plug_and_report(struct wcd_mbhc *mbhc, + enum wcd_mbhc_plug_type plug_type) +{ + if (mbhc->current_plug == plug_type) + return; + + mutex_lock(&mbhc->lock); + + switch (plug_type) { + case MBHC_PLUG_TYPE_HEADPHONE: + wcd_mbhc_report_plug(mbhc, 1, SND_JACK_HEADPHONE); + break; + case MBHC_PLUG_TYPE_HEADSET: + wcd_mbhc_report_plug(mbhc, 1, SND_JACK_HEADSET); + break; + case MBHC_PLUG_TYPE_HIGH_HPH: + wcd_mbhc_report_plug(mbhc, 1, SND_JACK_LINEOUT); + break; + case MBHC_PLUG_TYPE_GND_MIC_SWAP: + if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE) + wcd_mbhc_report_plug(mbhc, 0, SND_JACK_HEADPHONE); + if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET) + wcd_mbhc_report_plug(mbhc, 0, SND_JACK_HEADSET); + break; + default: + WARN(1, "Unexpected current plug_type %d, plug_type %d\n", + mbhc->current_plug, plug_type); + break; + } + mutex_unlock(&mbhc->lock); +} + +static void wcd_schedule_hs_detect_plug(struct wcd_mbhc *mbhc, + struct work_struct *work) +{ + WARN_ON(!mutex_is_locked(&mbhc->lock)); + mbhc->hs_detect_work_stop = false; + schedule_work(work); +} + +static void wcd_mbhc_adc_detect_plug_type(struct wcd_mbhc *mbhc) +{ + struct snd_soc_component *component = mbhc->component; + + WARN_ON(!mutex_is_locked(&mbhc->lock)); + + if (mbhc->mbhc_cb->hph_pull_down_ctrl) + mbhc->mbhc_cb->hph_pull_down_ctrl(component, false); + + wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0); + + if (mbhc->mbhc_cb->mbhc_micbias_control) { + mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2, + MICB_ENABLE); + wcd_schedule_hs_detect_plug(mbhc, &mbhc->correct_plug_swch); + } +} + +static irqreturn_t wcd_mbhc_mech_plug_detect_irq(int irq, void *data) +{ + struct snd_soc_component *component; + enum snd_jack_types jack_type; + struct wcd_mbhc *mbhc = data; + bool detection_type; + + component = mbhc->component; + mutex_lock(&mbhc->lock); + + mbhc->in_swch_irq_handler = true; + + wcd_mbhc_cancel_pending_work(mbhc); + + detection_type = wcd_mbhc_read_field(mbhc, WCD_MBHC_MECH_DETECTION_TYPE); + + /* Set the detection type appropriately */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_MECH_DETECTION_TYPE, !detection_type); + + /* Enable micbias ramp */ + if (mbhc->mbhc_cb->mbhc_micb_ramp_control) + mbhc->mbhc_cb->mbhc_micb_ramp_control(component, true); + + if (detection_type) { + if (mbhc->current_plug != MBHC_PLUG_TYPE_NONE) + goto exit; + /* Make sure MASTER_BIAS_CTL is enabled */ + mbhc->mbhc_cb->mbhc_bias(component, true); + mbhc->is_btn_press = false; + wcd_mbhc_adc_detect_plug_type(mbhc); + } else { + /* Disable HW FSM */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0); + mbhc->extn_cable_hph_rem = false; + + if (mbhc->current_plug == MBHC_PLUG_TYPE_NONE) + goto exit; + + mbhc->is_btn_press = false; + switch (mbhc->current_plug) { + case MBHC_PLUG_TYPE_HEADPHONE: + jack_type = SND_JACK_HEADPHONE; + break; + case MBHC_PLUG_TYPE_HEADSET: + jack_type = SND_JACK_HEADSET; + break; + case MBHC_PLUG_TYPE_HIGH_HPH: + if (mbhc->mbhc_detection_logic == WCD_DETECTION_ADC) + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 0); + jack_type = SND_JACK_LINEOUT; + break; + case MBHC_PLUG_TYPE_GND_MIC_SWAP: + dev_err(mbhc->dev, "Ground and Mic Swapped on plug\n"); + goto exit; + default: + dev_err(mbhc->dev, "Invalid current plug: %d\n", + mbhc->current_plug); + goto exit; + } + disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr); + disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_DETECTION_TYPE, 1); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0); + wcd_mbhc_report_plug(mbhc, 0, jack_type); + } + +exit: + mbhc->in_swch_irq_handler = false; + mutex_unlock(&mbhc->lock); + return IRQ_HANDLED; +} + +static int wcd_mbhc_get_button_mask(struct wcd_mbhc *mbhc) +{ + int mask = 0; + int btn; + + btn = wcd_mbhc_read_field(mbhc, WCD_MBHC_BTN_RESULT); + + switch (btn) { + case 0: + mask = SND_JACK_BTN_0; + break; + case 1: + mask = SND_JACK_BTN_1; + break; + case 2: + mask = SND_JACK_BTN_2; + break; + case 3: + mask = SND_JACK_BTN_3; + break; + case 4: + mask = SND_JACK_BTN_4; + break; + case 5: + mask = SND_JACK_BTN_5; + break; + default: + break; + } + + return mask; +} + +static void wcd_btn_long_press_fn(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct wcd_mbhc *mbhc = container_of(dwork, struct wcd_mbhc, mbhc_btn_dwork); + + if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET) + snd_soc_jack_report(mbhc->jack, mbhc->buttons_pressed, + mbhc->buttons_pressed); +} + +static irqreturn_t wcd_mbhc_btn_press_handler(int irq, void *data) +{ + struct wcd_mbhc *mbhc = data; + int mask; + unsigned long msec_val; + + mutex_lock(&mbhc->lock); + wcd_cancel_btn_work(mbhc); + mbhc->is_btn_press = true; + msec_val = jiffies_to_msecs(jiffies - mbhc->jiffies_atreport); + + /* Too short, ignore button press */ + if (msec_val < MBHC_BUTTON_PRESS_THRESHOLD_MIN) + goto done; + + /* If switch interrupt already kicked in, ignore button press */ + if (mbhc->in_swch_irq_handler) + goto done; + + /* Plug isn't headset, ignore button press */ + if (mbhc->current_plug != MBHC_PLUG_TYPE_HEADSET) + goto done; + + mask = wcd_mbhc_get_button_mask(mbhc); + mbhc->buttons_pressed |= mask; + if (schedule_delayed_work(&mbhc->mbhc_btn_dwork, msecs_to_jiffies(400)) == 0) + WARN(1, "Button pressed twice without release event\n"); +done: + mutex_unlock(&mbhc->lock); + return IRQ_HANDLED; +} + +static irqreturn_t wcd_mbhc_btn_release_handler(int irq, void *data) +{ + struct wcd_mbhc *mbhc = data; + int ret; + + mutex_lock(&mbhc->lock); + if (mbhc->is_btn_press) + mbhc->is_btn_press = false; + else /* fake btn press */ + goto exit; + + if (!(mbhc->buttons_pressed & WCD_MBHC_JACK_BUTTON_MASK)) + goto exit; + + ret = wcd_cancel_btn_work(mbhc); + if (ret == 0) { /* Reporting long button release event */ + snd_soc_jack_report(mbhc->jack, 0, mbhc->buttons_pressed); + } else { + if (!mbhc->in_swch_irq_handler) { + /* Reporting btn press n Release */ + snd_soc_jack_report(mbhc->jack, mbhc->buttons_pressed, + mbhc->buttons_pressed); + snd_soc_jack_report(mbhc->jack, 0, mbhc->buttons_pressed); + } + } + mbhc->buttons_pressed &= ~WCD_MBHC_JACK_BUTTON_MASK; +exit: + mutex_unlock(&mbhc->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t wcd_mbhc_hph_ocp_irq(struct wcd_mbhc *mbhc, bool hphr) +{ + + /* TODO Find a better way to report this to Userspace */ + dev_err(mbhc->dev, "MBHC Over Current on %s detected\n", + hphr ? "HPHR" : "HPHL"); + + wcd_mbhc_write_field(mbhc, WCD_MBHC_OCP_FSM_EN, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_OCP_FSM_EN, 1); + + return IRQ_HANDLED; +} + +static irqreturn_t wcd_mbhc_hphl_ocp_irq(int irq, void *data) +{ + return wcd_mbhc_hph_ocp_irq(data, false); +} + +static irqreturn_t wcd_mbhc_hphr_ocp_irq(int irq, void *data) +{ + return wcd_mbhc_hph_ocp_irq(data, true); +} + +static int wcd_mbhc_initialise(struct wcd_mbhc *mbhc) +{ + struct snd_soc_component *component = mbhc->component; + + mutex_lock(&mbhc->lock); + + /* enable HS detection */ + if (mbhc->mbhc_cb->hph_pull_up_control_v2) + mbhc->mbhc_cb->hph_pull_up_control_v2(component, + HS_PULLUP_I_DEFAULT); + else if (mbhc->mbhc_cb->hph_pull_up_control) + mbhc->mbhc_cb->hph_pull_up_control(component, I_DEFAULT); + else + wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_L_DET_PULL_UP_CTRL, 3); + + wcd_mbhc_write_field(mbhc, WCD_MBHC_HPHL_PLUG_TYPE, mbhc->cfg->hphl_swh); + wcd_mbhc_write_field(mbhc, WCD_MBHC_GND_PLUG_TYPE, mbhc->cfg->gnd_swh); + wcd_mbhc_write_field(mbhc, WCD_MBHC_SW_HPH_LP_100K_TO_GND, 1); + if (mbhc->cfg->gnd_det_en && mbhc->mbhc_cb->mbhc_gnd_det_ctrl) + mbhc->mbhc_cb->mbhc_gnd_det_ctrl(component, true); + wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_L_DET_PULL_UP_COMP_CTRL, 1); + + wcd_mbhc_write_field(mbhc, WCD_MBHC_L_DET_EN, 1); + + /* Insertion debounce set to 96ms */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_INSREM_DBNC, 6); + + /* Button Debounce set to 16ms */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_DBNC, 2); + + /* enable bias */ + mbhc->mbhc_cb->mbhc_bias(component, true); + /* enable MBHC clock */ + if (mbhc->mbhc_cb->clk_setup) + mbhc->mbhc_cb->clk_setup(component, true); + + /* program HS_VREF value */ + wcd_program_hs_vref(mbhc); + + wcd_program_btn_threshold(mbhc, false); + + mutex_unlock(&mbhc->lock); + + return 0; +} + +static int wcd_mbhc_get_micbias(struct wcd_mbhc *mbhc) +{ + int micbias = 0; + + if (mbhc->mbhc_cb->get_micbias_val) { + mbhc->mbhc_cb->get_micbias_val(mbhc->component, &micbias); + } else { + u8 vout_ctl = 0; + /* Read MBHC Micbias (Mic Bias2) voltage */ + vout_ctl = wcd_mbhc_read_field(mbhc, WCD_MBHC_MICB2_VOUT); + /* Formula for getting micbias from vout + * micbias = 1.0V + VOUT_CTL * 50mV + */ + micbias = 1000 + (vout_ctl * 50); + } + return micbias; +} + +static int wcd_get_voltage_from_adc(u8 val, int micbias) +{ + /* Formula for calculating voltage from ADC + * Voltage = ADC_RESULT*12.5mV*V_MICBIAS/1.8 + */ + return ((val * 125 * micbias)/(WCD_MBHC_ADC_MICBIAS_MV * 10)); +} + +static int wcd_measure_adc_continuous(struct wcd_mbhc *mbhc) +{ + u8 adc_result; + int output_mv; + int retry = 3; + u8 adc_en; + + /* Pre-requisites for ADC continuous measurement */ + /* Read legacy electircal detection and disable */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0x00); + /* Set ADC to continuous measurement */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 1); + /* Read ADC Enable bit to restore after adc measurement */ + adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN); + /* Disable ADC_ENABLE bit */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0); + /* Disable MBHC FSM */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0); + /* Set the MUX selection to IN2P */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_IN2P); + /* Enable MBHC FSM */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1); + /* Enable ADC_ENABLE bit */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 1); + + while (retry--) { + /* wait for 3 msec before reading ADC result */ + usleep_range(3000, 3100); + adc_result = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_RESULT); + } + + /* Restore ADC Enable */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en); + /* Get voltage from ADC result */ + output_mv = wcd_get_voltage_from_adc(adc_result, wcd_mbhc_get_micbias(mbhc)); + + return output_mv; +} + +static int wcd_measure_adc_once(struct wcd_mbhc *mbhc, int mux_ctl) +{ + struct device *dev = mbhc->dev; + u8 adc_timeout = 0; + u8 adc_complete = 0; + u8 adc_result; + int retry = 6; + int ret; + int output_mv = 0; + u8 adc_en; + + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0); + /* Read ADC Enable bit to restore after adc measurement */ + adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN); + /* Trigger ADC one time measurement */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0); + /* Set the appropriate MUX selection */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, mux_ctl); + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 1); + + while (retry--) { + /* wait for 600usec to get adc results */ + usleep_range(600, 610); + + /* check for ADC Timeout */ + adc_timeout = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_TIMEOUT); + if (adc_timeout) + continue; + + /* Read ADC complete bit */ + adc_complete = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_COMPLETE); + if (!adc_complete) + continue; + + /* Read ADC result */ + adc_result = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_RESULT); + + /* Get voltage from ADC result */ + output_mv = wcd_get_voltage_from_adc(adc_result, + wcd_mbhc_get_micbias(mbhc)); + break; + } + + /* Restore ADC Enable */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en); + + if (retry <= 0) { + dev_err(dev, "%s: adc complete: %d, adc timeout: %d\n", + __func__, adc_complete, adc_timeout); + ret = -EINVAL; + } else { + ret = output_mv; + } + + return ret; +} + +/* To determine if cross connection occurred */ +static int wcd_check_cross_conn(struct wcd_mbhc *mbhc) +{ + u8 adc_mode, elect_ctl, adc_en, fsm_en; + int hphl_adc_res, hphr_adc_res; + bool is_cross_conn = false; + + /* If PA is enabled, dont check for cross-connection */ + if (wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN)) + return -EINVAL; + + /* Read legacy electircal detection and disable */ + elect_ctl = wcd_mbhc_read_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0); + + /* Read and set ADC to single measurement */ + adc_mode = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_MODE); + /* Read ADC Enable bit to restore after adc measurement */ + adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN); + /* Read FSM status */ + fsm_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN); + + /* Get adc result for HPH L */ + hphl_adc_res = wcd_measure_adc_once(mbhc, MUX_CTL_HPH_L); + if (hphl_adc_res < 0) + return hphl_adc_res; + + /* Get adc result for HPH R in mV */ + hphr_adc_res = wcd_measure_adc_once(mbhc, MUX_CTL_HPH_R); + if (hphr_adc_res < 0) + return hphr_adc_res; + + if (hphl_adc_res > HPHL_CROSS_CONN_THRESHOLD || + hphr_adc_res > HPHL_CROSS_CONN_THRESHOLD) + is_cross_conn = true; + + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0); + /* Set the MUX selection to Auto */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_AUTO); + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1); + /* Restore ADC Enable */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en); + /* Restore ADC mode */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, adc_mode); + /* Restore FSM state */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, fsm_en); + /* Restore electrical detection */ + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, elect_ctl); + + return is_cross_conn; +} + +static int wcd_mbhc_adc_get_hs_thres(struct wcd_mbhc *mbhc) +{ + int hs_threshold, micbias_mv; + + micbias_mv = wcd_mbhc_get_micbias(mbhc); + if (mbhc->cfg->hs_thr) { + if (mbhc->cfg->micb_mv == micbias_mv) + hs_threshold = mbhc->cfg->hs_thr; + else + hs_threshold = (mbhc->cfg->hs_thr * + micbias_mv) / mbhc->cfg->micb_mv; + } else { + hs_threshold = ((WCD_MBHC_ADC_HS_THRESHOLD_MV * + micbias_mv) / WCD_MBHC_ADC_MICBIAS_MV); + } + return hs_threshold; +} + +static int wcd_mbhc_adc_get_hph_thres(struct wcd_mbhc *mbhc) +{ + int hph_threshold, micbias_mv; + + micbias_mv = wcd_mbhc_get_micbias(mbhc); + if (mbhc->cfg->hph_thr) { + if (mbhc->cfg->micb_mv == micbias_mv) + hph_threshold = mbhc->cfg->hph_thr; + else + hph_threshold = (mbhc->cfg->hph_thr * + micbias_mv) / mbhc->cfg->micb_mv; + } else { + hph_threshold = ((WCD_MBHC_ADC_HPH_THRESHOLD_MV * + micbias_mv) / WCD_MBHC_ADC_MICBIAS_MV); + } + return hph_threshold; +} + +static void wcd_mbhc_adc_update_fsm_source(struct wcd_mbhc *mbhc, + enum wcd_mbhc_plug_type plug_type) +{ + bool micbias2 = false; + + switch (plug_type) { + case MBHC_PLUG_TYPE_HEADPHONE: + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3); + break; + case MBHC_PLUG_TYPE_HEADSET: + if (mbhc->mbhc_cb->micbias_enable_status) + micbias2 = mbhc->mbhc_cb->micbias_enable_status(mbhc->component, + MIC_BIAS_2); + + if (!mbhc->is_hs_recording && !micbias2) + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3); + break; + default: + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0); + break; + + } +} + +static void wcd_mbhc_bcs_enable(struct wcd_mbhc *mbhc, int plug_type, bool enable) +{ + switch (plug_type) { + case MBHC_PLUG_TYPE_HEADSET: + case MBHC_PLUG_TYPE_HEADPHONE: + if (mbhc->mbhc_cb->bcs_enable) + mbhc->mbhc_cb->bcs_enable(mbhc->component, enable); + break; + default: + break; + } +} + +static int wcd_mbhc_get_plug_from_adc(struct wcd_mbhc *mbhc, int adc_result) + +{ + enum wcd_mbhc_plug_type plug_type; + u32 hph_thr, hs_thr; + + hs_thr = wcd_mbhc_adc_get_hs_thres(mbhc); + hph_thr = wcd_mbhc_adc_get_hph_thres(mbhc); + + if (adc_result < hph_thr) + plug_type = MBHC_PLUG_TYPE_HEADPHONE; + else if (adc_result > hs_thr) + plug_type = MBHC_PLUG_TYPE_HIGH_HPH; + else + plug_type = MBHC_PLUG_TYPE_HEADSET; + + return plug_type; +} + +static void wcd_correct_swch_plug(struct work_struct *work) +{ + struct wcd_mbhc *mbhc; + struct snd_soc_component *component; + enum wcd_mbhc_plug_type plug_type = MBHC_PLUG_TYPE_INVALID; + unsigned long timeout; + int pt_gnd_mic_swap_cnt = 0; + int output_mv, cross_conn, hs_threshold, try = 0; + bool is_pa_on; + + mbhc = container_of(work, struct wcd_mbhc, correct_plug_swch); + component = mbhc->component; + + hs_threshold = wcd_mbhc_adc_get_hs_thres(mbhc); + + /* Mask ADC COMPLETE interrupt */ + disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr); + + /* Check for cross connection */ + do { + cross_conn = wcd_check_cross_conn(mbhc); + try++; + } while (try < GND_MIC_SWAP_THRESHOLD); + + if (cross_conn > 0) { + plug_type = MBHC_PLUG_TYPE_GND_MIC_SWAP; + dev_err(mbhc->dev, "cross connection found, Plug type %d\n", + plug_type); + goto correct_plug_type; + } + + /* Find plug type */ + output_mv = wcd_measure_adc_continuous(mbhc); + plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv); + + /* + * Report plug type if it is either headset or headphone + * else start the 3 sec loop + */ + switch (plug_type) { + case MBHC_PLUG_TYPE_HEADPHONE: + wcd_mbhc_find_plug_and_report(mbhc, plug_type); + break; + case MBHC_PLUG_TYPE_HEADSET: + wcd_mbhc_find_plug_and_report(mbhc, plug_type); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1); + break; + default: + break; + } + +correct_plug_type: + + /* Disable BCS slow insertion detection */ + wcd_mbhc_bcs_enable(mbhc, plug_type, false); + + timeout = jiffies + msecs_to_jiffies(HS_DETECT_PLUG_TIME_MS); + + while (!time_after(jiffies, timeout)) { + if (mbhc->hs_detect_work_stop) { + wcd_micbias_disable(mbhc); + goto exit; + } + + msleep(180); + /* + * Use ADC single mode to minimize the chance of missing out + * btn press/release for HEADSET type during correct work. + */ + output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P); + plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv); + is_pa_on = wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN); + + if ((output_mv <= hs_threshold) && !is_pa_on) { + /* Check for cross connection*/ + cross_conn = wcd_check_cross_conn(mbhc); + if (cross_conn > 0) { /* cross-connection */ + pt_gnd_mic_swap_cnt++; + if (pt_gnd_mic_swap_cnt < GND_MIC_SWAP_THRESHOLD) + continue; + else + plug_type = MBHC_PLUG_TYPE_GND_MIC_SWAP; + } else if (!cross_conn) { /* no cross connection */ + pt_gnd_mic_swap_cnt = 0; + plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv); + continue; + } else if (cross_conn < 0) /* Error */ + continue; + + if (pt_gnd_mic_swap_cnt == GND_MIC_SWAP_THRESHOLD) { + /* US_EU gpio present, flip switch */ + if (mbhc->cfg->swap_gnd_mic) { + if (mbhc->cfg->swap_gnd_mic(component, true)) + continue; + } + } + } + + if (output_mv > hs_threshold) /* cable is extension cable */ + plug_type = MBHC_PLUG_TYPE_HIGH_HPH; + } + + wcd_mbhc_bcs_enable(mbhc, plug_type, true); + + if (plug_type == MBHC_PLUG_TYPE_HIGH_HPH) + wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 1); + + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0); + wcd_mbhc_find_plug_and_report(mbhc, plug_type); + + /* + * Set DETECTION_DONE bit for HEADSET + * so that btn press/release interrupt can be generated. + * For other plug type, clear the bit. + */ + if (plug_type == MBHC_PLUG_TYPE_HEADSET) + wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1); + else + wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0); + + if (mbhc->mbhc_cb->mbhc_micbias_control) + wcd_mbhc_adc_update_fsm_source(mbhc, plug_type); + +exit: + if (mbhc->mbhc_cb->mbhc_micbias_control/* && !mbhc->micbias_enable*/) + mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2, MICB_DISABLE); + + /* + * If plug type is corrected from special headset to headphone, + * clear the micbias enable flag, set micbias back to 1.8V and + * disable micbias. + */ + if (plug_type == MBHC_PLUG_TYPE_HEADPHONE) { + wcd_micbias_disable(mbhc); + /* + * Enable ADC COMPLETE interrupt for HEADPHONE. + * Btn release may happen after the correct work, ADC COMPLETE + * interrupt needs to be captured to correct plug type. + */ + enable_irq(mbhc->intr_ids->mbhc_hs_ins_intr); + } + + if (mbhc->mbhc_cb->hph_pull_down_ctrl) + mbhc->mbhc_cb->hph_pull_down_ctrl(component, true); +} + +static irqreturn_t wcd_mbhc_adc_hs_rem_irq(int irq, void *data) +{ + struct wcd_mbhc *mbhc = data; + unsigned long timeout; + int adc_threshold, output_mv, retry = 0; + bool hphpa_on = false; + + mutex_lock(&mbhc->lock); + timeout = jiffies + msecs_to_jiffies(WCD_FAKE_REMOVAL_MIN_PERIOD_MS); + adc_threshold = wcd_mbhc_adc_get_hs_thres(mbhc); + + do { + retry++; + /* + * read output_mv every 10ms to look for + * any change in IN2_P + */ + usleep_range(10000, 10100); + output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P); + + /* Check for fake removal */ + if ((output_mv <= adc_threshold) && retry > FAKE_REM_RETRY_ATTEMPTS) + goto exit; + } while (!time_after(jiffies, timeout)); + + /* + * ADC COMPLETE and ELEC_REM interrupts are both enabled for + * HEADPHONE, need to reject the ADC COMPLETE interrupt which + * follows ELEC_REM one when HEADPHONE is removed. + */ + if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE) + mbhc->extn_cable_hph_rem = true; + + wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0); + wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0); + wcd_mbhc_elec_hs_report_unplug(mbhc); + wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0); + + if (hphpa_on) { + hphpa_on = false; + wcd_mbhc_write_field(mbhc, WCD_MBHC_HPH_PA_EN, 3); + } +exit: + mutex_unlock(&mbhc->lock); + return IRQ_HANDLED; +} + +static irqreturn_t wcd_mbhc_adc_hs_ins_irq(int irq, void *data) +{ + struct wcd_mbhc *mbhc = data; + u8 clamp_state = 0; + u8 clamp_retry = WCD_MBHC_FAKE_INS_RETRY; + + /* + * ADC COMPLETE and ELEC_REM interrupts are both enabled for HEADPHONE, + * need to reject the ADC COMPLETE interrupt which follows ELEC_REM one + * when HEADPHONE is removed. + */ + if (mbhc->extn_cable_hph_rem == true) { + mbhc->extn_cable_hph_rem = false; + return IRQ_HANDLED; + } + + do { + clamp_state = wcd_mbhc_read_field(mbhc, WCD_MBHC_IN2P_CLAMP_STATE); + if (clamp_state) + return IRQ_HANDLED; + /* + * check clamp for 120ms but at 30ms chunks to leave + * room for other interrupts to be processed + */ + usleep_range(30000, 30100); + } while (--clamp_retry); + + /* + * If current plug is headphone then there is no chance to + * get ADC complete interrupt, so connected cable should be + * headset not headphone. + */ + if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE) { + disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr); + wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1); + wcd_mbhc_find_plug_and_report(mbhc, MBHC_PLUG_TYPE_HEADSET); + return IRQ_HANDLED; + } + + return IRQ_HANDLED; +} + +int wcd_mbhc_get_impedance(struct wcd_mbhc *mbhc, uint32_t *zl, uint32_t *zr) +{ + *zl = mbhc->zl; + *zr = mbhc->zr; + + if (*zl && *zr) + return 0; + else + return -EINVAL; +} +EXPORT_SYMBOL(wcd_mbhc_get_impedance); + +void wcd_mbhc_set_hph_type(struct wcd_mbhc *mbhc, int hph_type) +{ + mbhc->hph_type = hph_type; +} +EXPORT_SYMBOL(wcd_mbhc_set_hph_type); + +int wcd_mbhc_get_hph_type(struct wcd_mbhc *mbhc) +{ + return mbhc->hph_type; +} +EXPORT_SYMBOL(wcd_mbhc_get_hph_type); + +int wcd_mbhc_start(struct wcd_mbhc *mbhc, struct wcd_mbhc_config *cfg, + struct snd_soc_jack *jack) +{ + if (!mbhc || !cfg || !jack) + return -EINVAL; + + mbhc->cfg = cfg; + mbhc->jack = jack; + + return wcd_mbhc_initialise(mbhc); +} +EXPORT_SYMBOL(wcd_mbhc_start); + +void wcd_mbhc_stop(struct wcd_mbhc *mbhc) +{ + mbhc->current_plug = MBHC_PLUG_TYPE_NONE; + mbhc->hph_status = 0; + disable_irq_nosync(mbhc->intr_ids->hph_left_ocp); + disable_irq_nosync(mbhc->intr_ids->hph_right_ocp); +} +EXPORT_SYMBOL(wcd_mbhc_stop); + +int wcd_dt_parse_mbhc_data(struct device *dev, struct wcd_mbhc_config *cfg) +{ + struct device_node *np = dev->of_node; + int ret, i, microvolt; + + if (of_property_read_bool(np, "qcom,hphl-jack-type-normally-closed")) + cfg->hphl_swh = false; + else + cfg->hphl_swh = true; + + if (of_property_read_bool(np, "qcom,ground-jack-type-normally-closed")) + cfg->gnd_swh = false; + else + cfg->gnd_swh = true; + + ret = of_property_read_u32(np, "qcom,mbhc-headset-vthreshold-microvolt", + µvolt); + if (ret) + dev_dbg(dev, "missing qcom,mbhc-hs-mic-max-vthreshold--microvolt in dt node\n"); + else + cfg->hs_thr = microvolt/1000; + + ret = of_property_read_u32(np, "qcom,mbhc-headphone-vthreshold-microvolt", + µvolt); + if (ret) + dev_dbg(dev, "missing qcom,mbhc-hs-mic-min-vthreshold-microvolt entry\n"); + else + cfg->hph_thr = microvolt/1000; + + ret = of_property_read_u32_array(np, + "qcom,mbhc-buttons-vthreshold-microvolt", + &cfg->btn_high[0], + WCD_MBHC_DEF_BUTTONS); + if (ret) + dev_err(dev, "missing qcom,mbhc-buttons-vthreshold-microvolt entry\n"); + + for (i = 0; i < WCD_MBHC_DEF_BUTTONS; i++) { + if (ret) /* default voltage */ + cfg->btn_high[i] = 500000; + else + /* Micro to Milli Volts */ + cfg->btn_high[i] = cfg->btn_high[i]/1000; + } + + return 0; +} +EXPORT_SYMBOL(wcd_dt_parse_mbhc_data); + +struct wcd_mbhc *wcd_mbhc_init(struct snd_soc_component *component, + const struct wcd_mbhc_cb *mbhc_cb, + const struct wcd_mbhc_intr *intr_ids, + struct wcd_mbhc_field *fields, + bool impedance_det_en) +{ + struct device *dev = component->dev; + struct wcd_mbhc *mbhc; + int ret; + + if (!intr_ids || !fields || !mbhc_cb || !mbhc_cb->mbhc_bias || !mbhc_cb->set_btn_thr) { + dev_err(dev, "%s: Insufficient mbhc configuration\n", __func__); + return ERR_PTR(-EINVAL); + } + + mbhc = devm_kzalloc(dev, sizeof(*mbhc), GFP_KERNEL); + if (!mbhc) + return ERR_PTR(-ENOMEM); + + mbhc->component = component; + mbhc->dev = dev; + mbhc->intr_ids = intr_ids; + mbhc->mbhc_cb = mbhc_cb; + mbhc->fields = fields; + mbhc->mbhc_detection_logic = WCD_DETECTION_ADC; + + if (mbhc_cb->compute_impedance) + mbhc->impedance_detect = impedance_det_en; + + INIT_DELAYED_WORK(&mbhc->mbhc_btn_dwork, wcd_btn_long_press_fn); + + mutex_init(&mbhc->lock); + + INIT_WORK(&mbhc->correct_plug_swch, wcd_correct_swch_plug); + + ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_sw_intr, NULL, + wcd_mbhc_mech_plug_detect_irq, + IRQF_ONESHOT | IRQF_TRIGGER_RISING, + "mbhc sw intr", mbhc); + if (ret) + goto err; + + ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_btn_press_intr, NULL, + wcd_mbhc_btn_press_handler, + IRQF_ONESHOT | IRQF_TRIGGER_RISING, + "Button Press detect", mbhc); + if (ret) + goto err; + + ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_btn_release_intr, NULL, + wcd_mbhc_btn_release_handler, + IRQF_ONESHOT | IRQF_TRIGGER_RISING, + "Button Release detect", mbhc); + if (ret) + goto err; + + ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_hs_ins_intr, NULL, + wcd_mbhc_adc_hs_ins_irq, + IRQF_ONESHOT | IRQF_TRIGGER_RISING, + "Elect Insert", mbhc); + if (ret) + goto err; + + disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr); + + ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_hs_rem_intr, NULL, + wcd_mbhc_adc_hs_rem_irq, + IRQF_ONESHOT | IRQF_TRIGGER_RISING, + "Elect Remove", mbhc); + if (ret) + goto err; + + disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr); + + ret = devm_request_threaded_irq(dev, mbhc->intr_ids->hph_left_ocp, NULL, + wcd_mbhc_hphl_ocp_irq, + IRQF_ONESHOT | IRQF_TRIGGER_RISING, + "HPH_L OCP detect", mbhc); + if (ret) + goto err; + + ret = devm_request_threaded_irq(dev, mbhc->intr_ids->hph_right_ocp, NULL, + wcd_mbhc_hphr_ocp_irq, + IRQF_ONESHOT | IRQF_TRIGGER_RISING, + "HPH_R OCP detect", mbhc); + if (ret) + goto err; + + return mbhc; +err: + dev_err(dev, "Failed to request mbhc interrupts %d\n", ret); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL(wcd_mbhc_init); + +void wcd_mbhc_deinit(struct wcd_mbhc *mbhc) +{ + mutex_lock(&mbhc->lock); + wcd_cancel_hs_detect_plug(mbhc, &mbhc->correct_plug_swch); + mutex_unlock(&mbhc->lock); +} +EXPORT_SYMBOL(wcd_mbhc_deinit); + +static int __init mbhc_init(void) +{ + return 0; +} + +static void __exit mbhc_exit(void) +{ +} + +module_init(mbhc_init); +module_exit(mbhc_exit); + +MODULE_DESCRIPTION("wcd MBHC v2 module"); +MODULE_LICENSE("GPL"); |