21 files changed, 191 insertions, 233 deletions

diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index ee58cde8ee3b..73e80b917f12 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -79,8 +79,8 @@ endef
 # would try to directly execute the shell builtin 'command'. This workaround
 # should be kept for a long time since this issue was fixed only after the
 # GNU Make 4.2.1 release.
-cc-cross-prefix = $(firstword $(foreach c, $(filter-out -%, $(1)), \
-			$(if $(shell command -v $(c)gcc 2>/dev/null), $(c))))
+cc-cross-prefix = $(firstword $(foreach c, $(1), \
+			$(if $(shell command -v -- $(c)gcc 2>/dev/null), $(c))))
 
 # output directory for tests below
 TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
@@ -187,12 +187,6 @@ dtbinst := -f $(srctree)/scripts/Makefile.dtbinst obj
 # $(Q)$(MAKE) $(clean)=dir
 clean := -f $(srctree)/scripts/Makefile.clean obj
 
-###
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.headersinst obj=
-# Usage:
-# $(Q)$(MAKE) $(hdr-inst)=dir
-hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
-
 # echo command.
 # Short version is used, if $(quiet) equals `quiet_', otherwise full one.
 echo-cmd = $(if $($(quiet)cmd_$(1)),\
@@ -213,12 +207,12 @@ objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
 # See Documentation/kbuild/makefiles.rst for more info
 
 ifneq ($(KBUILD_NOCMDDEP),1)
-# Check if both arguments are the same including their order. Result is empty
+# Check if both commands are the same including their order. Result is empty
 # string if equal. User may override this check using make KBUILD_NOCMDDEP=1
-arg-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
+cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
                          $(subst $(space),$(space_escape),$(strip $(cmd_$1))))
 else
-arg-check = $(if $(strip $(cmd_$@)),,1)
+cmd-check = $(if $(strip $(cmd_$@)),,1)
 endif
 
 # Replace >$< with >$$< to preserve $ when reloading the .cmd file
@@ -231,15 +225,15 @@ make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1))))
 
 # Find any prerequisites that is newer than target or that does not exist.
 # PHONY targets skipped in both cases.
-any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
+any-prereq = $(filter-out $(PHONY),$?)$(filter-out $(PHONY) $(wildcard $^),$^)
 
 # Execute command if command has changed or prerequisite(s) are updated.
-if_changed = $(if $(strip $(any-prereq) $(arg-check)),                       \
+if_changed = $(if $(any-prereq)$(cmd-check),                                 \
 	$(cmd);                                                              \
 	printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
 
 # Execute the command and also postprocess generated .d dependencies file.
-if_changed_dep = $(if $(strip $(any-prereq) $(arg-check)),$(cmd_and_fixdep),@:)
+if_changed_dep = $(if $(any-prereq)$(cmd-check),$(cmd_and_fixdep),@:)
 
 cmd_and_fixdep =                                                             \
 	$(cmd);                                                              \
@@ -249,7 +243,7 @@ cmd_and_fixdep =                                                             \
 # Usage: $(call if_changed_rule,foo)
 # Will check if $(cmd_foo) or any of the prerequisites changed,
 # and if so will execute $(rule_foo).
-if_changed_rule = $(if $(strip $(any-prereq) $(arg-check)),$(rule_$(1)),@:)
+if_changed_rule = $(if $(any-prereq)$(cmd-check),$(rule_$(1)),@:)
 
 ###
 # why - tell why a target got built
@@ -274,8 +268,8 @@ ifeq ($(KBUILD_VERBOSE),2)
 why =                                                                        \
     $(if $(filter $@, $(PHONY)),- due to target is PHONY,                    \
         $(if $(wildcard $@),                                                 \
-            $(if $(strip $(any-prereq)),- due to: $(any-prereq),             \
-                $(if $(arg-check),                                           \
+            $(if $(any-prereq),- due to: $(any-prereq),                      \
+                $(if $(cmd-check),                                           \
                     $(if $(cmd_$@),- due to command line change,             \
                         $(if $(filter $@, $(targets)),                       \
                             - due to missing .cmd file,                      \
diff --git a/scripts/Makefile b/scripts/Makefile
index 9d442ee050bd..16bcb8087899 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -31,11 +31,6 @@ always		:= $(hostprogs-y) $(hostprogs-m)
 # The following hostprogs-y programs are only build on demand
 hostprogs-y += unifdef
 
-# These targets are used internally to avoid "is up to date" messages
-PHONY += build_unifdef
-build_unifdef: $(obj)/unifdef
-	@:
-
 subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins
 subdir-$(CONFIG_MODVERSIONS) += genksyms
 subdir-$(CONFIG_SECURITY_SELINUX) += selinux
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index ae9cf740633e..be38198d98b2 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -294,6 +294,15 @@ quiet_cmd_cc_lst_c = MKLST   $@
 $(obj)/%.lst: $(src)/%.c FORCE
 	$(call if_changed_dep,cc_lst_c)
 
+# header test (header-test-y target)
+# ---------------------------------------------------------------------------
+
+quiet_cmd_cc_s_h = CC      $@
+      cmd_cc_s_h = $(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<
+
+$(obj)/%.h.s: $(src)/%.h FORCE
+	$(call if_changed_dep,cc_s_h)
+
 # Compile assembler sources (.S)
 # ---------------------------------------------------------------------------
 
@@ -504,7 +513,7 @@ existing-targets := $(wildcard $(sort $(targets)))
 
 -include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
 
-ifneq ($(srctree),.)
+ifdef building_out_of_srctree
 # Create directories for object files if they do not exist
 obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets))))
 # If targets exist, their directories apparently exist. Skip mkdir.
diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn
index 3ab8d1a303cd..a74ce2e3c33e 100644
--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -34,7 +34,6 @@ warning-1 += $(call cc-option, -Wstringop-truncation)
 warning-1 += -Wno-missing-field-initializers
 warning-1 += -Wno-sign-compare
 
-warning-2 := -Waggregate-return
 warning-2 += -Wcast-align
 warning-2 += -Wdisabled-optimization
 warning-2 += -Wnested-externs
@@ -68,10 +67,8 @@ else
 
 ifdef CONFIG_CC_IS_CLANG
 KBUILD_CFLAGS += -Wno-initializer-overrides
-KBUILD_CFLAGS += -Wno-unused-value
 KBUILD_CFLAGS += -Wno-format
 KBUILD_CFLAGS += -Wno-sign-compare
 KBUILD_CFLAGS += -Wno-format-zero-length
-KBUILD_CFLAGS += -Wno-uninitialized
 endif
 endif
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 3d1ebaabd1b6..1b405a7ed14f 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -14,109 +14,89 @@ __headers:
 
 include scripts/Kbuild.include
 
-srcdir        := $(srctree)/$(obj)
+src := $(srctree)/$(obj)
+gen := $(objtree)/$(subst include/,include/generated/,$(obj))
+dst := usr/include
 
-# When make is run under a fakechroot environment, the function
-# $(wildcard $(srcdir)/*/.) doesn't only return directories, but also regular
-# files. So, we are using a combination of sort/dir/wildcard which works
-# with fakechroot.
-subdirs       := $(patsubst $(srcdir)/%/,%,\
-		 $(filter-out $(srcdir)/,\
-		 $(sort $(dir $(wildcard $(srcdir)/*/)))))
+-include $(src)/Kbuild
 
-# Recursion
-__headers: $(subdirs)
+# $(filter %/, ...) is a workaround for GNU Make <= 4.2.1, where
+# $(wildcard $(src)/*/) contains not only directories but also regular files.
+src-subdirs := $(patsubst $(src)/%/,%,$(filter %/, $(wildcard $(src)/*/)))
+gen-subdirs := $(patsubst $(gen)/%/,%,$(filter %/, $(wildcard $(gen)/*/)))
+all-subdirs := $(sort $(src-subdirs) $(gen-subdirs))
 
-PHONY += $(subdirs)
-$(subdirs):
-	$(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(dst)/$@
+src-headers := $(if $(src-subdirs), $(shell cd $(src) && find $(src-subdirs) -name '*.h'))
+src-headers := $(filter-out $(no-export-headers), $(src-headers))
+gen-headers := $(if $(gen-subdirs), $(shell cd $(gen) && find $(gen-subdirs) -name '*.h'))
+gen-headers := $(filter-out $(no-export-headers), $(gen-headers))
 
-# Skip header install/check for include/uapi and arch/$(SRCARCH)/include/uapi.
-# We have only sub-directories there.
-skip-inst := $(if $(filter %/uapi,$(obj)),1)
+# If the same header is exported from source and generated directories,
+# the former takes precedence, but this should be warned.
+duplicated := $(filter $(gen-headers), $(src-headers))
+$(if $(duplicated), $(warning duplicated header export: $(duplicated)))
 
-ifeq ($(skip-inst),)
+gen-headers := $(filter-out $(duplicated), $(gen-headers))
 
-# Kbuild file is optional
-kbuild-file := $(srctree)/$(obj)/Kbuild
--include $(kbuild-file)
+# Add dst path prefix
+all-subdirs := $(addprefix $(dst)/, $(all-subdirs))
+src-headers := $(addprefix $(dst)/, $(src-headers))
+gen-headers := $(addprefix $(dst)/, $(gen-headers))
+all-headers := $(src-headers) $(gen-headers)
 
-installdir    := $(INSTALL_HDR_PATH)/$(dst)
-gendir        := $(objtree)/$(subst include/,include/generated/,$(obj))
-header-files  := $(notdir $(wildcard $(srcdir)/*.h))
-header-files  := $(filter-out $(no-export-headers), $(header-files))
-genhdr-files  := $(notdir $(wildcard $(gendir)/*.h))
-genhdr-files  := $(filter-out $(header-files), $(genhdr-files))
+# Work out what needs to be removed
+old-subdirs := $(wildcard $(all-subdirs))
+old-headers := $(if $(old-subdirs),$(shell find $(old-subdirs) -name '*.h'))
+unwanted    := $(filter-out $(all-headers), $(old-headers))
 
-# files used to track state of install/check
-install-file  := $(installdir)/.install
-check-file    := $(installdir)/.check
+# Create directories
+existing-dirs := $(sort $(dir $(old-headers)))
+wanted-dirs   := $(sort $(dir $(all-headers)))
+new-dirs      := $(filter-out $(existing-dirs), $(wanted-dirs))
+$(if $(new-dirs), $(shell mkdir -p $(new-dirs)))
 
-# all headers files for this dir
-all-files     := $(header-files) $(genhdr-files)
-output-files  := $(addprefix $(installdir)/, $(all-files))
+# Rules
 
-# Work out what needs to be removed
-oldheaders    := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
-unwanted      := $(filter-out $(all-files),$(oldheaders))
+ifndef HDRCHECK
 
-# Prefix unwanted with full paths to $(INSTALL_HDR_PATH)
-unwanted-file := $(addprefix $(installdir)/, $(unwanted))
+quiet_cmd_install = HDRINST $@
+      cmd_install = $(CONFIG_SHELL) $(srctree)/scripts/headers_install.sh $< $@
 
-printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
+$(src-headers): $(dst)/%.h: $(src)/%.h $(srctree)/scripts/headers_install.sh FORCE
+	$(call if_changed,install)
 
-quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
-                            file$(if $(word 2, $(all-files)),s))
-      cmd_install = \
-        $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-files); \
-        $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-files); \
-        touch $@
+$(gen-headers): $(dst)/%.h: $(gen)/%.h $(srctree)/scripts/headers_install.sh FORCE
+	$(call if_changed,install)
 
 quiet_cmd_remove = REMOVE  $(unwanted)
-      cmd_remove = rm -f $(unwanted-file)
-
-quiet_cmd_check = CHECK   $(printdir) ($(words $(all-files)) files)
-# Headers list can be pretty long, xargs helps to avoid
-# the "Argument list too long" error.
-      cmd_check = for f in $(all-files); do                          \
-                  echo "$(installdir)/$${f}"; done                      \
-                  | xargs                                            \
-                  $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH); \
-	          touch $@
+      cmd_remove = rm -f $(unwanted)
 
-ifndef HDRCHECK
-# Rules for installing headers
-__headers: $(install-file)
+__headers: $(all-headers)
+ifneq ($(unwanted),)
+	$(call cmd,remove)
+endif
 	@:
 
-targets += $(install-file)
-$(install-file): scripts/headers_install.sh \
-		 $(addprefix $(srcdir)/,$(header-files)) \
-		 $(addprefix $(gendir)/,$(genhdr-files)) FORCE
-	$(if $(unwanted),$(call cmd,remove),)
-	$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
-	$(call if_changed,install)
+existing-headers := $(filter $(old-headers), $(all-headers))
+
+-include $(foreach f,$(existing-headers),$(dir $(f)).$(notdir $(f)).cmd)
 
 else
-__headers: $(check-file)
-	@:
 
-targets += $(check-file)
-$(check-file): scripts/headers_check.pl $(output-files) FORCE
-	$(call if_changed,check)
+quiet_cmd_check = HDRCHK  $<
+      cmd_check = $(PERL) $(srctree)/scripts/headers_check.pl $(dst) $(SRCARCH) $<; touch $@
 
-endif
+check-files := $(addsuffix .chk, $(all-headers))
 
-cmd_files := $(wildcard \
-             $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
+$(check-files): $(dst)/%.chk : $(dst)/% $(srctree)/scripts/headers_check.pl
+	$(call cmd,check)
 
-ifneq ($(cmd_files),)
-	include $(cmd_files)
-endif
+__headers: $(check-files)
+	@:
 
-endif # skip-inst
+endif
 
 PHONY += FORCE
-FORCE: ;
+FORCE:
 
 .PHONY: $(PHONY)
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index a316d368b697..2208ebbd8c4c 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -69,7 +69,7 @@ _hostcxx_flags = $(KBUILD_HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
 
 # $(objtree)/$(obj) for including generated headers from checkin source files
 ifeq ($(KBUILD_EXTMOD),)
-ifneq ($(srctree),.)
+ifdef building_out_of_srctree
 _hostc_flags   += -I $(objtree)/$(obj)
 _hostcxx_flags += -I $(objtree)/$(obj)
 endif
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index f1f38c8cdc74..6cb3aa5cbc79 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -66,6 +66,20 @@ extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
 extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
 endif
 
+# Test self-contained headers
+
+# Wildcard searches in $(srctree)/$(src)/, but not in $(objtree)/$(obj)/.
+# Stale generated headers are often left over, so pattern matching should
+# be avoided. Please notice $(srctree)/$(src)/ and $(objtree)/$(obj) point
+# to the same location for in-tree building. So, header-test-pattern-y should
+# be used with care.
+header-test-y	+= $(filter-out $(header-test-), \
+		$(patsubst $(srctree)/$(src)/%, %, \
+		$(wildcard $(addprefix $(srctree)/$(src)/, \
+		$(header-test-pattern-y)))))
+
+extra-$(CONFIG_HEADER_TEST) += $(addsuffix .s, $(header-test-y))
+
 # Add subdir path
 
 extra-y		:= $(addprefix $(obj)/,$(extra-y))
@@ -140,7 +154,7 @@ endif
 # $(srctree)/$(src) for including checkin headers from generated source files
 # $(objtree)/$(obj) for including generated headers from checkin source files
 ifeq ($(KBUILD_EXTMOD),)
-ifneq ($(srctree),.)
+ifdef building_out_of_srctree
 _c_flags   += -I $(srctree)/$(src) -I $(objtree)/$(obj)
 _a_flags   += -I $(srctree)/$(src) -I $(objtree)/$(obj)
 _cpp_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj)
@@ -331,19 +345,19 @@ printf "%08x\n" $$dec_size |						\
 )
 
 quiet_cmd_bzip2 = BZIP2   $@
-      cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9 && $(size_append); } > $@
+      cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9; $(size_append); } > $@
 
 # Lzma
 # ---------------------------------------------------------------------------
 
 quiet_cmd_lzma = LZMA    $@
-      cmd_lzma = { cat $(real-prereqs) | lzma -9 && $(size_append); } > $@
+      cmd_lzma = { cat $(real-prereqs) | lzma -9; $(size_append); } > $@
 
 quiet_cmd_lzo = LZO     $@
-      cmd_lzo = { cat $(real-prereqs) | lzop -9 && $(size_append); } > $@
+      cmd_lzo = { cat $(real-prereqs) | lzop -9; $(size_append); } > $@
 
 quiet_cmd_lz4 = LZ4     $@
-      cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout && \
+      cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout; \
                   $(size_append); } > $@
 
 # U-Boot mkimage
@@ -386,7 +400,7 @@ quiet_cmd_uimage = UIMAGE  $@
 # big dictionary would increase the memory usage too much in the multi-call
 # decompression mode. A BCJ filter isn't used either.
 quiet_cmd_xzkern = XZKERN  $@
-      cmd_xzkern = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh && \
+      cmd_xzkern = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh; \
                      $(size_append); } > $@
 
 quiet_cmd_xzmisc = XZMISC  $@
diff --git a/scripts/Makefile.modbuiltin b/scripts/Makefile.modbuiltin
index ea90a90b41a0..50a9990760f3 100644
--- a/scripts/Makefile.modbuiltin
+++ b/scripts/Makefile.modbuiltin
@@ -15,7 +15,7 @@ include include/config/tristate.conf
 
 include scripts/Kbuild.include
 
-ifneq ($(srctree),.)
+ifdef building_out_of_srctree
 # Create output directory if not already present
 _dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
 endif
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index facbd603adf6..9ba47b0a47b9 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -99,6 +99,7 @@
 #include <unistd.h>
 #include <fcntl.h>
 #include <string.h>
+#include <stdarg.h>
 #include <stdlib.h>
 #include <stdio.h>
 #include <ctype.h>
@@ -110,13 +111,43 @@ static void usage(void)
 }
 
 /*
+ * In the intended usage of this program, the stdout is redirected to .*.cmd
+ * files. The return value of printf() and putchar() must be checked to catch
+ * any error, e.g. "No space left on device".
+ */
+static void xprintf(const char *format, ...)
+{
+	va_list ap;
+	int ret;
+
+	va_start(ap, format);
+	ret = vprintf(format, ap);
+	if (ret < 0) {
+		perror("fixdep");
+		exit(1);
+	}
+	va_end(ap);
+}
+
+static void xputchar(int c)
+{
+	int ret;
+
+	ret = putchar(c);
+	if (ret == EOF) {
+		perror("fixdep");
+		exit(1);
+	}
+}
+
+/*
  * Print out a dependency path from a symbol name
  */
 static void print_dep(const char *m, int slen, const char *dir)
 {
 	int c, prev_c = '/', i;
 
-	printf("    $(wildcard %s/", dir);
+	xprintf("    $(wildcard %s/", dir);
 	for (i = 0; i < slen; i++) {
 		c = m[i];
 		if (c == '_')
@@ -124,10 +155,10 @@ static void print_dep(const char *m, int slen, const char *dir)
 		else
 			c = tolower(c);
 		if (c != '/' || prev_c != '/')
-			putchar(c);
+			xputchar(c);
 		prev_c = c;
 	}
-	printf(".h) \\\n");
+	xprintf(".h) \\\n");
 }
 
 struct item {
@@ -324,13 +355,13 @@ static void parse_dep_file(char *m, const char *target)
 				 */
 				if (!saw_any_target) {
 					saw_any_target = 1;
-					printf("source_%s := %s\n\n",
-					       target, m);
-					printf("deps_%s := \\\n", target);
+					xprintf("source_%s := %s\n\n",
+						target, m);
+					xprintf("deps_%s := \\\n", target);
 				}
 				is_first_dep = 0;
 			} else {
-				printf("  %s \\\n", m);
+				xprintf("  %s \\\n", m);
 			}
 
 			buf = read_file(m);
@@ -353,8 +384,8 @@ static void parse_dep_file(char *m, const char *target)
 		exit(1);
 	}
 
-	printf("\n%s: $(deps_%s)\n\n", target, target);
-	printf("$(deps_%s):\n", target);
+	xprintf("\n%s: $(deps_%s)\n\n", target, target);
+	xprintf("$(deps_%s):\n", target);
 }
 
 int main(int argc, char *argv[])
@@ -369,7 +400,7 @@ int main(int argc, char *argv[])
 	target = argv[2];
 	cmdline = argv[3];
 
-	printf("cmd_%s := %s\n\n", target, cmdline);
+	xprintf("cmd_%s := %s\n\n", target, cmdline);
 
 	buf = read_file(depfile);
 	parse_dep_file(buf, target);
diff --git a/scripts/coccinelle/api/kstrdup.cocci b/scripts/coccinelle/api/kstrdup.cocci
index 888bf43df07e..19f2645e6076 100644
--- a/scripts/coccinelle/api/kstrdup.cocci
+++ b/scripts/coccinelle/api/kstrdup.cocci
@@ -77,7 +77,7 @@ p1 << r1.p1;
 p2 << r1.p2;
 @@
 
-cocci.print_main("WARNING opportunity for kstrdep",p1)
+cocci.print_main("WARNING opportunity for kstrdup",p1)
 cocci.print_secs("strcpy",p2)
 
 @script:python depends on org@
@@ -85,7 +85,7 @@ p1 << r2.p1;
 p2 << r2.p2;
 @@
 
-cocci.print_main("WARNING opportunity for kstrdep",p1)
+cocci.print_main("WARNING opportunity for kstrdup",p1)
 cocci.print_secs("memcpy",p2)
 
 @script:python depends on report@
@@ -93,7 +93,7 @@ p1 << r1.p1;
 p2 << r1.p2;
 @@
 
-msg = "WARNING opportunity for kstrdep (strcpy on line %s)" % (p2[0].line)
+msg = "WARNING opportunity for kstrdup (strcpy on line %s)" % (p2[0].line)
 coccilib.report.print_report(p1[0], msg)
 
 @script:python depends on report@
@@ -101,5 +101,5 @@ p1 << r2.p1;
 p2 << r2.p2;
 @@
 
-msg = "WARNING opportunity for kstrdep (memcpy on line %s)" % (p2[0].line)
+msg = "WARNING opportunity for kstrdup (memcpy on line %s)" % (p2[0].line)
 coccilib.report.print_report(p1[0], msg)
diff --git a/scripts/coccinelle/api/stream_open.cocci b/scripts/coccinelle/api/stream_open.cocci
index 350145da7669..12ce18fa6b74 100644
--- a/scripts/coccinelle/api/stream_open.cocci
+++ b/scripts/coccinelle/api/stream_open.cocci
@@ -35,11 +35,11 @@ type loff_t;
 // a function that blocks
 @ blocks @
 identifier block_f;
-identifier wait_event =~ "^wait_event_.*";
+identifier wait =~ "^wait_.*";
 @@
   block_f(...) {
     ... when exists
-    wait_event(...)
+    wait(...)
     ... when exists
   }
 
@@ -49,12 +49,12 @@ identifier wait_event =~ "^wait_event_.*";
 // XXX currently reader_blocks supports only direct and 1-level indirect cases.
 @ reader_blocks_direct @
 identifier stream_reader.readstream;
-identifier wait_event =~ "^wait_event_.*";
+identifier wait =~ "^wait_.*";
 @@
   readstream(...)
   {
     ... when exists
-    wait_event(...)
+    wait(...)
     ... when exists
   }
 
diff --git a/scripts/coccinelle/free/put_device.cocci b/scripts/coccinelle/free/put_device.cocci
index c9f071b0a0ab..120921366e84 100644
--- a/scripts/coccinelle/free/put_device.cocci
+++ b/scripts/coccinelle/free/put_device.cocci
@@ -24,7 +24,7 @@ if (id == NULL || ...) { ... return ...; }
     when != of_dev_put(id)
     when != if (id) { ... put_device(&id->dev) ... }
     when != e1 = (T)id
-    when != e1 = &id->dev
+    when != e1 = (T)(&id->dev)
     when != e1 = get_device(&id->dev)
     when != e1 = (T1)platform_get_drvdata(id)
 (
@@ -42,11 +42,10 @@ p1 << search.p1;
 p2 << search.p2;
 @@
 
-coccilib.report.print_report(p2[0], "ERROR: missing put_device; "
-			      + "call of_find_device_by_node on line "
-			      + p1[0].line
-			      + ", but without a corresponding object release "
-			      + "within this function.")
+coccilib.report.print_report(p2[0],
+                             "ERROR: missing put_device; call of_find_device_by_node on line "
+                             + p1[0].line
+                             + ", but without a corresponding object release within this function.")
 
 @script:python depends on org@
 p1 << search.p1;
diff --git a/scripts/gdb/linux/Makefile b/scripts/gdb/linux/Makefile
index 9fd3d8ed731a..124755087510 100644
--- a/scripts/gdb/linux/Makefile
+++ b/scripts/gdb/linux/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-ifneq ($(srctree),.)
+ifdef building_out_of_srctree
 
 symlinks := $(patsubst $(srctree)/$(src)/%,%,$(wildcard $(srctree)/$(src)/*.py))
 
diff --git a/scripts/genksyms/keywords.c b/scripts/genksyms/keywords.c
index e93336baaaed..c586d32dd2c3 100644
--- a/scripts/genksyms/keywords.c
+++ b/scripts/genksyms/keywords.c
@@ -25,6 +25,10 @@ static struct resword {
 	{ "__volatile__", VOLATILE_KEYW },
 	{ "__builtin_va_list", VA_LIST_KEYW },
 
+	{ "__int128", BUILTIN_INT_KEYW },
+	{ "__int128_t", BUILTIN_INT_KEYW },
+	{ "__uint128_t", BUILTIN_INT_KEYW },
+
 	// According to rth, c99 defines "_Bool", __restrict", __restrict__", "restrict".  KAO
 	{ "_Bool", BOOL_KEYW },
 	{ "_restrict", RESTRICT_KEYW },
diff --git a/scripts/genksyms/parse.y b/scripts/genksyms/parse.y
index 00a6d7e54971..1ebcf52cd0f9 100644
--- a/scripts/genksyms/parse.y
+++ b/scripts/genksyms/parse.y
@@ -76,6 +76,7 @@ static void record_compound(struct string_list **keyw,
 %token ATTRIBUTE_KEYW
 %token AUTO_KEYW
 %token BOOL_KEYW
+%token BUILTIN_INT_KEYW
 %token CHAR_KEYW
 %token CONST_KEYW
 %token DOUBLE_KEYW
@@ -263,6 +264,7 @@ simple_type_specifier:
 	| VOID_KEYW
 	| BOOL_KEYW
 	| VA_LIST_KEYW
+	| BUILTIN_INT_KEYW
 	| TYPE			{ (*$1)->tag = SYM_TYPEDEF; $$ = $1; }
 	;
 
diff --git a/scripts/headers.sh b/scripts/headers.sh
deleted file mode 100755
index e0f883eb39a2..000000000000
--- a/scripts/headers.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-# Run headers_$1 command for all suitable architectures
-
-# Stop on error
-set -e
-
-do_command()
-{
-	if [ -f ${srctree}/arch/$2/include/asm/Kbuild ]; then
-		make ARCH=$2 KBUILD_HEADERS=$1 headers_$1
-	else
-		printf "Ignoring arch: %s\n" ${arch}
-	fi
-}
-
-archs=${HDR_ARCH_LIST:-$(ls ${srctree}/arch)}
-
-for arch in ${archs}; do
-	case ${arch} in
-	um)        # no userspace export
-		;;
-	*)
-		if [ -d ${srctree}/arch/${arch} ]; then
-			do_command $1 ${arch}
-		fi
-		;;
-	esac
-done
diff --git a/scripts/headers_install.sh b/scripts/headers_install.sh
index 593f8879c641..47f6f3ea0771 100755
--- a/scripts/headers_install.sh
+++ b/scripts/headers_install.sh
@@ -1,47 +1,39 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
-if [ $# -lt 2 ]
+if [ $# -ne 2 ]
 then
-	echo "Usage: headers_install.sh OUTDIR SRCDIR [FILES...]"
+	echo "Usage: headers_install.sh INFILE OUTFILE"
 	echo
 	echo "Prepares kernel header files for use by user space, by removing"
 	echo "all compiler.h definitions and #includes, removing any"
 	echo "#ifdef __KERNEL__ sections, and putting __underscores__ around"
 	echo "asm/inline/volatile keywords."
 	echo
-	echo "OUTDIR: directory to write each userspace header FILE to."
-	echo "SRCDIR: source directory where files are picked."
-	echo "FILES:  list of header files to operate on."
+	echo "INFILE: header file to operate on"
+	echo "OUTFILE: output file which the processed header is writen to"
 
 	exit 1
 fi
 
 # Grab arguments
+INFILE=$1
+OUTFILE=$2
+TMPFILE=$OUTFILE.tmp
 
-OUTDIR="$1"
-shift
-SRCDIR="$1"
-shift
+trap 'rm -f $OUTFILE $TMPFILE' EXIT
 
-# Iterate through files listed on command line
+sed -E -e '
+	s/([[:space:](])(__user|__force|__iomem)[[:space:]]/\1/g
+	s/__attribute_const__([[:space:]]|$)/\1/g
+	s@^#include <linux/compiler(|_types).h>@@
+	s/(^|[^a-zA-Z0-9])__packed([^a-zA-Z0-9_]|$)/\1__attribute__((packed))\2/g
+	s/(^|[[:space:](])(inline|asm|volatile)([[:space:](]|$)/\1__\2__\3/g
+	s@#(ifndef|define|endif[[:space:]]*/[*])[[:space:]]*_UAPI@#\1 @
+' $INFILE > $TMPFILE || exit 1
 
-FILE=
-trap 'rm -f "$OUTDIR/$FILE" "$OUTDIR/$FILE.sed"' EXIT
-for i in "$@"
-do
-	FILE="$(basename "$i")"
-	sed -E \
-		-e 's/([[:space:](])(__user|__force|__iomem)[[:space:]]/\1/g' \
-		-e 's/__attribute_const__([[:space:]]|$)/\1/g' \
-		-e 's@^#include <linux/compiler(|_types).h>@@' \
-		-e 's/(^|[^a-zA-Z0-9])__packed([^a-zA-Z0-9_]|$)/\1__attribute__((packed))\2/g' \
-		-e 's/(^|[[:space:](])(inline|asm|volatile)([[:space:](]|$)/\1__\2__\3/g' \
-		-e 's@#(ifndef|define|endif[[:space:]]*/[*])[[:space:]]*_UAPI@#\1 @' \
-		"$SRCDIR/$i" > "$OUTDIR/$FILE.sed" || exit 1
-	scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__ "$OUTDIR/$FILE.sed" \
-		> "$OUTDIR/$FILE"
-	[ $? -gt 1 ] && exit 1
-	rm -f "$OUTDIR/$FILE.sed"
-done
+scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__ $TMPFILE > $OUTFILE
+[ $? -gt 1 ] && exit 1
+
+rm -f $TMPFILE
 trap - EXIT
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index e17837f1d3f2..ae6504d07fd6 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -150,6 +150,9 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 	/* exclude debugging symbols */
 	else if (stype == 'N' || stype == 'n')
 		return -1;
+	/* exclude s390 kasan local symbols */
+	else if (!strncmp(sym, ".LASANPC", 8))
+		return -1;
 
 	/* include the type field in the symbol name, so that it gets
 	 * compressed together */
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index b03dd56a4782..e8ca6dc97e96 100755
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -130,7 +130,7 @@ if is_enabled CONFIG_MODULES; then
 fi
 
 if [ "$ARCH" != "um" ]; then
-	$MAKE -f $srctree/Makefile headers_check
+	$MAKE -f $srctree/Makefile headers
 	$MAKE -f $srctree/Makefile headers_install INSTALL_HDR_PATH="$libc_headers_dir/usr"
 fi
 
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 009147d4718e..2d29df4a0a53 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -31,7 +31,7 @@ PROVIDES="$PROVIDES kernel-$KERNELRELEASE"
 __KERNELRELEASE=$(echo $KERNELRELEASE | sed -e "s/-/_/g")
 EXCLUDES="$RCS_TAR_IGNORE --exclude=.tmp_versions --exclude=*vmlinux* \
 --exclude=*.o --exclude=*.ko --exclude=*.cmd --exclude=Documentation \
---exclude=.config.old --exclude=.missing-syscalls.d"
+--exclude=.config.old --exclude=.missing-syscalls.d --exclude=*.s"
 
 # We can label the here-doc lines for conditional output to the spec file
 #
diff --git a/scripts/tags.sh b/scripts/tags.sh
index d46be47633af..4e18ae5282a6 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -6,7 +6,7 @@
 # mode may be any of: tags, TAGS, cscope
 #
 # Uses the following environment variables:
-# ARCH, SUBARCH, SRCARCH, srctree, src, obj
+# SUBARCH, SRCARCH, srctree
 
 if [ "$KBUILD_VERBOSE" = "1" ]; then
 	set -x
@@ -17,8 +17,7 @@ ignore="$(echo "$RCS_FIND_IGNORE" | sed 's|\\||g' )"
 # tags and cscope files should also ignore MODVERSION *.mod.c files
 ignore="$ignore ( -name *.mod.c ) -prune -o"
 
-# Do not use full path if we do not use O=.. builds
-# Use make O=. {tags|cscope}
+# Use make KBUILD_ABS_SRCTREE=1 {tags|cscope}
 # to force full paths for a non-O= build
 if [ "${srctree}" = "." -o -z "${srctree}" ]; then
 	tree=
@@ -36,21 +35,19 @@ elif [ "${ALLSOURCE_ARCHS}" = "all" ]; then
 	ALLSOURCE_ARCHS=$(find ${tree}arch/ -mindepth 1 -maxdepth 1 -type d -printf '%f ')
 fi
 
-# find sources in arch/$ARCH
+# find sources in arch/$1
 find_arch_sources()
 {
 	for i in $archincludedir; do
 		prune="$prune -wholename $i -prune -o"
 	done
-	find ${tree}arch/$1 $ignore $subarchprune $prune -name "$2" \
-		-not -type l -print;
+	find ${tree}arch/$1 $ignore $prune -name "$2" -not -type l -print;
 }
 
 # find sources in arch/$1/include
 find_arch_include_sources()
 {
-	include=$(find ${tree}arch/$1/ $subarchprune \
-					-name include -type d -print);
+	include=$(find ${tree}arch/$1/ -name include -type d -print);
 	if [ -n "$include" ]; then
 		archincludedir="$archincludedir $include"
 		find $include $ignore -name "$2" -not -type l -print;
@@ -306,36 +303,6 @@ if [ "${ARCH}" = "um" ]; then
 	else
 		archinclude=${SUBARCH}
 	fi
-elif [ "${SRCARCH}" = "arm" -a "${SUBARCH}" != "" ]; then
-	subarchdir=$(find ${tree}arch/$SRCARCH/ -name "mach-*" -type d -o \
-							-name "plat-*" -type d);
-	mach_suffix=$SUBARCH
-	plat_suffix=$SUBARCH
-
-	# Special cases when $plat_suffix != $mach_suffix
-	case $mach_suffix in
-		"omap1" | "omap2")
-			plat_suffix="omap"
-			;;
-	esac
-
-	if [ ! -d ${tree}arch/$SRCARCH/mach-$mach_suffix ]; then
-		echo "Warning: arch/arm/mach-$mach_suffix/ not found." >&2
-		echo "         Fix your \$SUBARCH appropriately" >&2
-	fi
-
-	for i in $subarchdir; do
-		case "$i" in
-			*"mach-"${mach_suffix})
-				;;
-			*"plat-"${plat_suffix})
-				;;
-			*)
-				subarchprune="$subarchprune \
-						-wholename $i -prune -o"
-				;;
-		esac
-	done
 fi
 
 remove_structs=