diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/usb/pd.h | 311 | ||||
| -rw-r--r-- | include/linux/acpi.h | 10 | ||||
| -rw-r--r-- | include/linux/platform_data/cros_ec_commands.h | 43 | ||||
| -rw-r--r-- | include/linux/property.h | 7 | ||||
| -rw-r--r-- | include/linux/thunderbolt.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/ch9.h | 20 | ||||
| -rw-r--r-- | include/linux/usb/chipidea.h | 6 | ||||
| -rw-r--r-- | include/linux/usb/composite.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 11 | ||||
| -rw-r--r-- | include/linux/usb/pd.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/pd_vdo.h | 304 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/tcpm.h | 9 | ||||
| -rw-r--r-- | include/linux/usb/tegra_usb_phy.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/typec.h | 23 | ||||
| -rw-r--r-- | include/linux/usb/typec_altmode.h | 10 | ||||
| -rw-r--r-- | include/uapi/linux/usb/ch9.h | 13 | ||||
| -rw-r--r-- | include/uapi/linux/usb/tmc.h | 3 |
18 files changed, 745 insertions, 37 deletions
diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h index 0352893697f0..fef3ef65967f 100644 --- a/include/dt-bindings/usb/pd.h +++ b/include/dt-bindings/usb/pd.h @@ -93,4 +93,313 @@ #define FRS_DEFAULT_POWER 1 #define FRS_5V_1P5A 2 #define FRS_5V_3A 3 - #endif /* __DT_POWER_DELIVERY_H */ + +/* + * SVDM Identity Header + * -------------------- + * <31> :: data capable as a USB host + * <30> :: data capable as a USB device + * <29:27> :: product type (UFP / Cable / VPD) + * <26> :: modal operation supported (1b == yes) + * <25:23> :: product type (DFP) (SVDM version 2.0+ only; set to zero in version 1.0) + * <22:21> :: connector type (SVDM version 2.0+ only; set to zero in version 1.0) + * <20:16> :: Reserved, Shall be set to zero + * <15:0> :: USB-IF assigned VID for this cable vendor + */ +/* SOP Product Type (UFP) */ +#define IDH_PTYPE_NOT_UFP 0 +#define IDH_PTYPE_HUB 1 +#define IDH_PTYPE_PERIPH 2 +#define IDH_PTYPE_PSD 3 +#define IDH_PTYPE_AMA 5 + +/* SOP' Product Type (Cable Plug / VPD) */ +#define IDH_PTYPE_NOT_CABLE 0 +#define IDH_PTYPE_PCABLE 3 +#define IDH_PTYPE_ACABLE 4 +#define IDH_PTYPE_VPD 6 + +/* SOP Product Type (DFP) */ +#define IDH_PTYPE_NOT_DFP 0 +#define IDH_PTYPE_DFP_HUB 1 +#define IDH_PTYPE_DFP_HOST 2 +#define IDH_PTYPE_DFP_PB 3 + +#define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid) \ + ((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27 \ + | (is_modal) << 26 | ((dfp) & 0x7) << 23 | ((conn) & 0x3) << 21 \ + | ((vid) & 0xffff)) + +/* + * Cert Stat VDO + * ------------- + * <31:0> : USB-IF assigned XID for this cable + */ +#define VDO_CERT(xid) ((xid) & 0xffffffff) + +/* + * Product VDO + * ----------- + * <31:16> : USB Product ID + * <15:0> : USB bcdDevice + */ +#define VDO_PRODUCT(pid, bcd) (((pid) & 0xffff) << 16 | ((bcd) & 0xffff)) + +/* + * UFP VDO (PD Revision 3.0+ only) + * -------- + * <31:29> :: UFP VDO version + * <28> :: Reserved + * <27:24> :: Device capability + * <23:22> :: Connector type (10b == receptacle, 11b == captive plug) + * <21:11> :: Reserved + * <10:8> :: Vconn power (AMA only) + * <7> :: Vconn required (AMA only, 0b == no, 1b == yes) + * <6> :: Vbus required (AMA only, 0b == yes, 1b == no) + * <5:3> :: Alternate modes + * <2:0> :: USB highest speed + */ +/* UFP VDO Version */ +#define UFP_VDO_VER1_2 2 + +/* Device Capability */ +#define DEV_USB2_CAPABLE BIT(0) +#define DEV_USB2_BILLBOARD BIT(1) +#define DEV_USB3_CAPABLE BIT(2) +#define DEV_USB4_CAPABLE BIT(3) + +/* Connector Type */ +#define UFP_RECEPTACLE 2 +#define UFP_CAPTIVE 3 + +/* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required) */ +#define AMA_VCONN_PWR_1W 0 +#define AMA_VCONN_PWR_1W5 1 +#define AMA_VCONN_PWR_2W 2 +#define AMA_VCONN_PWR_3W 3 +#define AMA_VCONN_PWR_4W 4 +#define AMA_VCONN_PWR_5W 5 +#define AMA_VCONN_PWR_6W 6 + +/* Vconn Required (AMA only) */ +#define AMA_VCONN_NOT_REQ 0 +#define AMA_VCONN_REQ 1 + +/* Vbus Required (AMA only) */ +#define AMA_VBUS_REQ 0 +#define AMA_VBUS_NOT_REQ 1 + +/* Alternate Modes */ +#define UFP_ALTMODE_NOT_SUPP 0 +#define UFP_ALTMODE_TBT3 BIT(0) +#define UFP_ALTMODE_RECFG BIT(1) +#define UFP_ALTMODE_NO_RECFG BIT(2) + +/* USB Highest Speed */ +#define UFP_USB2_ONLY 0 +#define UFP_USB32_GEN1 1 +#define UFP_USB32_4_GEN2 2 +#define UFP_USB4_GEN3 3 + +#define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd) \ + (((ver) & 0x7) << 29 | ((cap) & 0xf) << 24 | ((conn) & 0x3) << 22 \ + | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3 \ + | ((spd) & 0x7)) + +/* + * DFP VDO (PD Revision 3.0+ only) + * -------- + * <31:29> :: DFP VDO version + * <28:27> :: Reserved + * <26:24> :: Host capability + * <23:22> :: Connector type (10b == receptacle, 11b == captive plug) + * <21:5> :: Reserved + * <4:0> :: Port number + */ +#define DFP_VDO_VER1_1 1 +#define HOST_USB2_CAPABLE BIT(0) +#define HOST_USB3_CAPABLE BIT(1) +#define HOST_USB4_CAPABLE BIT(2) +#define DFP_RECEPTACLE 2 +#define DFP_CAPTIVE 3 + +#define VDO_DFP(ver, cap, conn, pnum) \ + (((ver) & 0x7) << 29 | ((cap) & 0x7) << 24 | ((conn) & 0x3) << 22 \ + | ((pnum) & 0x1f)) + +/* + * Passive Cable VDO + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:21> :: VDO version + * <20> :: Reserved, Shall be set to zero + * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive) + * <17> :: Reserved, Shall be set to zero + * <16:13> :: cable latency (0001 == <10ns(~1m length)) + * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req) + * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) + * <8:7> :: Reserved, Shall be set to zero + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) + * <4:3> :: Reserved, Shall be set to zero + * <2:0> :: USB highest speed + * + * Active Cable VDO 1 + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:21> :: VDO version + * <20> :: Reserved, Shall be set to zero + * <19:18> :: Connector type (10b == C, 11b == Captive) + * <17> :: Reserved, Shall be set to zero + * <16:13> :: cable latency (0001 == <10ns(~1m length)) + * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req) + * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) + * <8> :: SBU supported (0b == supported, 1b == not supported) + * <7> :: SBU type (0b == passive, 1b == active) + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) + * <4> :: Vbus through cable (0b == no, 1b == yes) + * <3> :: SOP" controller present? (0b == no, 1b == yes) + * <2:0> :: USB highest speed + */ +/* Cable VDO Version */ +#define CABLE_VDO_VER1_0 0 +#define CABLE_VDO_VER1_3 3 + +/* Connector Type */ +#define CABLE_CTYPE 2 +#define CABLE_CAPTIVE 3 + +/* Cable Latency */ +#define CABLE_LATENCY_1M 1 +#define CABLE_LATENCY_2M 2 +#define CABLE_LATENCY_3M 3 +#define CABLE_LATENCY_4M 4 +#define CABLE_LATENCY_5M 5 +#define CABLE_LATENCY_6M 6 +#define CABLE_LATENCY_7M 7 +#define CABLE_LATENCY_7M_PLUS 8 + +/* Cable Termination Type */ +#define PCABLE_VCONN_NOT_REQ 0 +#define PCABLE_VCONN_REQ 1 +#define ACABLE_ONE_END 2 +#define ACABLE_BOTH_END 3 + +/* Maximum Vbus Voltage */ +#define CABLE_MAX_VBUS_20V 0 +#define CABLE_MAX_VBUS_30V 1 +#define CABLE_MAX_VBUS_40V 2 +#define CABLE_MAX_VBUS_50V 3 + +/* Active Cable SBU Supported/Type */ +#define ACABLE_SBU_SUPP 0 +#define ACABLE_SBU_NOT_SUPP 1 +#define ACABLE_SBU_PASSIVE 0 +#define ACABLE_SBU_ACTIVE 1 + +/* Vbus Current Handling Capability */ +#define CABLE_CURR_DEF 0 +#define CABLE_CURR_3A 1 +#define CABLE_CURR_5A 2 + +/* USB Highest Speed */ +#define CABLE_USB2_ONLY 0 +#define CABLE_USB32_GEN1 1 +#define CABLE_USB32_4_GEN2 2 +#define CABLE_USB4_GEN3 3 + +#define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd) \ + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ + | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ + | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 5 | ((spd) & 0x7)) +#define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt, sopp, spd) \ + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ + | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ + | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5 \ + | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7)) + +/* + * Active Cable VDO 2 + * --------- + * <31:24> :: Maximum operating temperature + * <23:16> :: Shutdown temperature + * <15> :: Reserved, Shall be set to zero + * <14:12> :: U3/CLd power + * <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S) + * <10> :: Physical connection (0b == copper, 1b == optical) + * <9> :: Active element (0b == redriver, 1b == retimer) + * <8> :: USB4 supported (0b == yes, 1b == no) + * <7:6> :: USB2 hub hops consumed + * <5> :: USB2 supported (0b == yes, 1b == no) + * <4> :: USB3.2 supported (0b == yes, 1b == no) + * <3> :: USB lanes supported (0b == one lane, 1b == two lanes) + * <2> :: Optically isolated active cable (0b == no, 1b == yes) + * <1> :: Reserved, Shall be set to zero + * <0> :: USB gen (0b == gen1, 1b == gen2+) + */ +/* U3/CLd Power*/ +#define ACAB2_U3_CLD_10MW_PLUS 0 +#define ACAB2_U3_CLD_10MW 1 +#define ACAB2_U3_CLD_5MW 2 +#define ACAB2_U3_CLD_1MW 3 +#define ACAB2_U3_CLD_500UW 4 +#define ACAB2_U3_CLD_200UW 5 +#define ACAB2_U3_CLD_50UW 6 + +/* Other Active Cable VDO 2 Fields */ +#define ACAB2_U3U0_DIRECT 0 +#define ACAB2_U3U0_U3S 1 +#define ACAB2_PHY_COPPER 0 +#define ACAB2_PHY_OPTICAL 1 +#define ACAB2_REDRIVER 0 +#define ACAB2_RETIMER 1 +#define ACAB2_USB4_SUPP 0 +#define ACAB2_USB4_NOT_SUPP 1 +#define ACAB2_USB2_SUPP 0 +#define ACAB2_USB2_NOT_SUPP 1 +#define ACAB2_USB32_SUPP 0 +#define ACAB2_USB32_NOT_SUPP 1 +#define ACAB2_LANES_ONE 0 +#define ACAB2_LANES_TWO 1 +#define ACAB2_OPT_ISO_NO 0 +#define ACAB2_OPT_ISO_YES 1 +#define ACAB2_GEN_1 0 +#define ACAB2_GEN_2_PLUS 1 + +#define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32, lane, iso, gen) \ + (((mtemp) & 0xff) << 24 | ((stemp) & 0xff) << 16 | ((u3p) & 0x7) << 12 \ + | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8 \ + | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3 \ + | (iso) << 2 | (gen)) + +/* + * VPD VDO + * --------- + * <31:28> :: HW version + * <27:24> :: FW version + * <23:21> :: VDO version + * <20:17> :: Reserved, Shall be set to zero + * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) + * <14> :: Charge through current support (0b == 3A, 1b == 5A) + * <13> :: Reserved, Shall be set to zero + * <12:7> :: Vbus impedance + * <6:1> :: Ground impedance + * <0> :: Charge through support (0b == no, 1b == yes) + */ +#define VPD_VDO_VER1_0 0 +#define VPD_MAX_VBUS_20V 0 +#define VPD_MAX_VBUS_30V 1 +#define VPD_MAX_VBUS_40V 2 +#define VPD_MAX_VBUS_50V 3 +#define VPDCT_CURR_3A 0 +#define VPDCT_CURR_5A 1 +#define VPDCT_NOT_SUPP 0 +#define VPDCT_SUPP 1 + +#define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct) \ + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ + | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7 \ + | ((gi) & 0x3f) << 1 | (ct)) + +#endif /* __DT_POWER_DELIVERY_H */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 053bf05fb1f7..68eef9e67dcb 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -546,9 +546,19 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context); #define OSC_SB_OSLPI_SUPPORT 0x00000100 #define OSC_SB_CPC_DIVERSE_HIGH_SUPPORT 0x00001000 #define OSC_SB_GENERIC_INITIATOR_SUPPORT 0x00002000 +#define OSC_SB_NATIVE_USB4_SUPPORT 0x00040000 extern bool osc_sb_apei_support_acked; extern bool osc_pc_lpi_support_confirmed; +extern bool osc_sb_native_usb4_support_confirmed; + +/* USB4 Capabilities */ +#define OSC_USB_USB3_TUNNELING 0x00000001 +#define OSC_USB_DP_TUNNELING 0x00000002 +#define OSC_USB_PCIE_TUNNELING 0x00000004 +#define OSC_USB_XDOMAIN 0x00000008 + +extern u32 osc_sb_native_usb4_control; /* PCI Host Bridge _OSC: Capabilities DWORD 2: Support Field */ #define OSC_PCI_EXT_CONFIG_SUPPORT 0x00000001 diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 86376779ab31..50e1caad81be 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -1286,6 +1286,16 @@ enum ec_feature_code { EC_FEATURE_ISH = 40, /* New TCPMv2 TYPEC_ prefaced commands supported */ EC_FEATURE_TYPEC_CMD = 41, + /* + * The EC will wait for direction from the AP to enter Type-C alternate + * modes or USB4. + */ + EC_FEATURE_TYPEC_REQUIRE_AP_MODE_ENTRY = 42, + /* + * The EC will wait for an acknowledge from the AP after setting the + * mux. + */ + EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK = 43, }; #define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32) @@ -5567,6 +5577,32 @@ struct ec_response_typec_discovery { struct svid_mode_info svids[0]; } __ec_align1; +/* USB Type-C commands for AP-controlled device policy. */ +#define EC_CMD_TYPEC_CONTROL 0x0132 + +enum typec_control_command { + TYPEC_CONTROL_COMMAND_EXIT_MODES, + TYPEC_CONTROL_COMMAND_CLEAR_EVENTS, + TYPEC_CONTROL_COMMAND_ENTER_MODE, +}; + +struct ec_params_typec_control { + uint8_t port; + uint8_t command; /* enum typec_control_command */ + uint16_t reserved; + + /* + * This section will be interpreted based on |command|. Define a + * placeholder structure to avoid having to increase the size and bump + * the command version when adding new sub-commands. + */ + union { + uint32_t clear_events_mask; + uint8_t mode_to_enter; /* enum typec_mode */ + uint8_t placeholder[128]; + }; +} __ec_align1; + /* * Gather all status information for a port. * @@ -6054,6 +6090,13 @@ struct ec_params_charger_control { uint8_t allow_charging; } __ec_align_size1; +/* Get ACK from the USB-C SS muxes */ +#define EC_CMD_USB_PD_MUX_ACK 0x0603 + +struct ec_params_usb_pd_mux_ack { + uint8_t port; /* USB-C port number */ +} __ec_align1; + /*****************************************************************************/ /* * Reserve a range of host commands for board-specific, experimental, or diff --git a/include/linux/property.h b/include/linux/property.h index 0a9001fe7aea..dafccfce0262 100644 --- a/include/linux/property.h +++ b/include/linux/property.h @@ -488,4 +488,11 @@ fwnode_create_software_node(const struct property_entry *properties, const struct fwnode_handle *parent); void fwnode_remove_software_node(struct fwnode_handle *fwnode); +int device_add_software_node(struct device *dev, const struct software_node *swnode); +void device_remove_software_node(struct device *dev); + +int device_create_managed_software_node(struct device *dev, + const struct property_entry *properties, + const struct software_node *parent); + #endif /* _LINUX_PROPERTY_H_ */ diff --git a/include/linux/thunderbolt.h b/include/linux/thunderbolt.h index 034dccf93955..659a0a810fa1 100644 --- a/include/linux/thunderbolt.h +++ b/include/linux/thunderbolt.h @@ -45,6 +45,8 @@ enum tb_cfg_pkg_type { * @TB_SECURITY_USBONLY: Only tunnel USB controller of the connected * Thunderbolt dock (and Display Port). All PCIe * links downstream of the dock are removed. + * @TB_SECURITY_NOPCIE: For USB4 systems this level is used when the + * PCIe tunneling is disabled from the BIOS. */ enum tb_security_level { TB_SECURITY_NONE, @@ -52,6 +54,7 @@ enum tb_security_level { TB_SECURITY_SECURE, TB_SECURITY_DPONLY, TB_SECURITY_USBONLY, + TB_SECURITY_NOPCIE, }; /** diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 604c6c514a50..abdd310c77f0 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -36,6 +36,15 @@ #include <linux/device.h> #include <uapi/linux/usb/ch9.h> +/* USB 3.2 SuperSpeed Plus phy signaling rate generation and lane count */ + +enum usb_ssp_rate { + USB_SSP_GEN_UNKNOWN = 0, + USB_SSP_GEN_2x1, + USB_SSP_GEN_1x2, + USB_SSP_GEN_2x2, +}; + /** * usb_ep_type_string() - Returns human readable-name of the endpoint type. * @ep_type: The endpoint type to return human-readable name for. If it's not @@ -63,6 +72,17 @@ extern const char *usb_speed_string(enum usb_device_speed speed); extern enum usb_device_speed usb_get_maximum_speed(struct device *dev); /** + * usb_get_maximum_ssp_rate - Get the signaling rate generation and lane count + * of a SuperSpeed Plus capable device. + * @dev: Pointer to the given USB controller device + * + * If the string from "maximum-speed" property is super-speed-plus-genXxY where + * 'X' is the generation number and 'Y' is the number of lanes, then this + * function returns the corresponding enum usb_ssp_rate. + */ +extern enum usb_ssp_rate usb_get_maximum_ssp_rate(struct device *dev); + +/** * usb_state_string - Returns human readable name for the state. * @state: The state to return a human-readable name for. If it's not * any of the states devices in usb_device_state_string enum, diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 025b41687ce9..edf3342507f1 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -88,6 +88,12 @@ struct ci_hdrc_platform_data { struct pinctrl_state *pins_default; struct pinctrl_state *pins_host; struct pinctrl_state *pins_device; + + /* platform-specific hooks */ + int (*hub_control)(struct ci_hdrc *ci, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength, + bool *done, unsigned long *flags); + void (*enter_lpm)(struct ci_hdrc *ci, bool enable); }; /* Default offset of capability registers */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index a2d229ab63ba..5646dad886e6 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -525,6 +525,8 @@ extern struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev, extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n); extern void composite_disconnect(struct usb_gadget *gadget); +extern void composite_reset(struct usb_gadget *gadget); + extern int composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl); extern void composite_suspend(struct usb_gadget *gadget); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index e7351d64f11f..ee04ef214ce8 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -323,6 +323,8 @@ struct usb_gadget_ops { struct usb_gadget_driver *); int (*udc_stop)(struct usb_gadget *); void (*udc_set_speed)(struct usb_gadget *, enum usb_device_speed); + void (*udc_set_ssp_rate)(struct usb_gadget *gadget, + enum usb_ssp_rate rate); struct usb_ep *(*match_ep)(struct usb_gadget *, struct usb_endpoint_descriptor *, struct usb_ss_ep_comp_descriptor *); @@ -339,6 +341,10 @@ struct usb_gadget_ops { * @speed: Speed of current connection to USB host. * @max_speed: Maximal speed the UDC can handle. UDC must support this * and all slower speeds. + * @ssp_rate: Current connected SuperSpeed Plus signaling rate and lane count. + * @max_ssp_rate: Maximum SuperSpeed Plus signaling rate and lane count the UDC + * can handle. The UDC must support this and all slower speeds and lower + * number of lanes. * @state: the state we are now (attached, suspended, configured, etc) * @name: Identifies the controller hardware type. Used in diagnostics * and sometimes configuration. @@ -406,6 +412,11 @@ struct usb_gadget { struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; enum usb_device_speed max_speed; + + /* USB SuperSpeed Plus only */ + enum usb_ssp_rate ssp_rate; + enum usb_ssp_rate max_ssp_rate; + enum usb_device_state state; const char *name; struct device dev; diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index bb9a782e1411..70d681918d01 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -225,6 +225,7 @@ enum pd_pdo_type { #define PDO_FIXED_EXTPOWER BIT(27) /* Externally powered */ #define PDO_FIXED_USB_COMM BIT(26) /* USB communications capable */ #define PDO_FIXED_DATA_SWAP BIT(25) /* Data role swap supported */ +#define PDO_FIXED_UNCHUNK_EXT BIT(24) /* Unchunked Extended Message supported (Source) */ #define PDO_FIXED_FRS_CURR_MASK (BIT(24) | BIT(23)) /* FR_Swap Current (Sink) */ #define PDO_FIXED_FRS_CURR_SHIFT 23 #define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ @@ -479,6 +480,8 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_NEWSRC 250 /* Maximum of 275ms */ #define PD_T_SWAP_SRC_START 20 /* Minimum of 20ms */ #define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */ +#define PD_T_SINK_TX 16 /* 16 - 20 ms */ +#define PD_T_CHUNK_NOT_SUPP 42 /* 40 - 50 ms */ #define PD_T_DRP_TRY 100 /* 75 - 150 ms */ #define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */ diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h index 8c08eeb9a74b..b057250704e8 100644 --- a/include/linux/usb/pd_vdo.h +++ b/include/linux/usb/pd_vdo.h @@ -21,22 +21,24 @@ * ---------- * <31:16> :: SVID * <15> :: VDM type ( 1b == structured, 0b == unstructured ) - * <14:13> :: Structured VDM version (can only be 00 == 1.0 currently) + * <14:13> :: Structured VDM version * <12:11> :: reserved * <10:8> :: object position (1-7 valid ... used for enter/exit mode only) * <7:6> :: command type (SVDM only?) * <5> :: reserved (SVDM), command type (UVDM) * <4:0> :: command */ -#define VDO(vid, type, custom) \ +#define VDO(vid, type, ver, custom) \ (((vid) << 16) | \ ((type) << 15) | \ + ((ver) << 13) | \ ((custom) & 0x7FFF)) #define VDO_SVDM_TYPE (1 << 15) #define VDO_SVDM_VERS(x) ((x) << 13) #define VDO_OPOS(x) ((x) << 8) #define VDO_CMDT(x) ((x) << 6) +#define VDO_SVDM_VERS_MASK VDO_SVDM_VERS(0x3) #define VDO_OPOS_MASK VDO_OPOS(0x7) #define VDO_CMDT_MASK VDO_CMDT(0x3) @@ -74,6 +76,7 @@ #define PD_VDO_VID(vdo) ((vdo) >> 16) #define PD_VDO_SVDM(vdo) (((vdo) >> 15) & 1) +#define PD_VDO_SVDM_VER(vdo) (((vdo) >> 13) & 0x3) #define PD_VDO_OPOS(vdo) (((vdo) >> 8) & 0x7) #define PD_VDO_CMD(vdo) ((vdo) & 0x1f) #define PD_VDO_CMDT(vdo) (((vdo) >> 6) & 0x3) @@ -103,34 +106,50 @@ * -------------------- * <31> :: data capable as a USB host * <30> :: data capable as a USB device - * <29:27> :: product type (UFP / Cable) + * <29:27> :: product type (UFP / Cable / VPD) * <26> :: modal operation supported (1b == yes) - * <25:16> :: product type (DFP) + * <25:23> :: product type (DFP) (SVDM version 2.0+ only; set to zero in version 1.0) + * <22:21> :: connector type (SVDM version 2.0+ only; set to zero in version 1.0) + * <20:16> :: Reserved, Shall be set to zero * <15:0> :: USB-IF assigned VID for this cable vendor */ + +/* PD Rev2.0 definition */ #define IDH_PTYPE_UNDEF 0 + +/* SOP Product Type (UFP) */ +#define IDH_PTYPE_NOT_UFP 0 #define IDH_PTYPE_HUB 1 #define IDH_PTYPE_PERIPH 2 #define IDH_PTYPE_PSD 3 #define IDH_PTYPE_AMA 5 +/* SOP' Product Type (Cable Plug / VPD) */ +#define IDH_PTYPE_NOT_CABLE 0 #define IDH_PTYPE_PCABLE 3 #define IDH_PTYPE_ACABLE 4 +#define IDH_PTYPE_VPD 6 -#define IDH_PTYPE_DFP_UNDEF 0 +/* SOP Product Type (DFP) */ +#define IDH_PTYPE_NOT_DFP 0 #define IDH_PTYPE_DFP_HUB 1 #define IDH_PTYPE_DFP_HOST 2 #define IDH_PTYPE_DFP_PB 3 -#define IDH_PTYPE_DFP_AMC 4 -#define VDO_IDH(usbh, usbd, ptype, is_modal, vid) \ - ((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27 \ - | (is_modal) << 26 | ((vid) & 0xffff)) +/* ID Header Mask */ +#define IDH_DFP_MASK GENMASK(25, 23) +#define IDH_CONN_MASK GENMASK(22, 21) + +#define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid) \ + ((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27 \ + | (is_modal) << 26 | ((dfp) & 0x7) << 23 | ((conn) & 0x3) << 21 \ + | ((vid) & 0xffff)) #define PD_IDH_PTYPE(vdo) (((vdo) >> 27) & 0x7) #define PD_IDH_VID(vdo) ((vdo) & 0xffff) #define PD_IDH_MODAL_SUPP(vdo) ((vdo) & (1 << 26)) #define PD_IDH_DFP_PTYPE(vdo) (((vdo) >> 23) & 0x7) +#define PD_IDH_CONN_TYPE(vdo) (((vdo) >> 21) & 0x3) /* * Cert Stat VDO @@ -138,6 +157,7 @@ * <31:0> : USB-IF assigned XID for this cable */ #define PD_CSTAT_XID(vdo) (vdo) +#define VDO_CERT(xid) ((xid) & 0xffffffff) /* * Product VDO @@ -149,79 +169,271 @@ #define PD_PRODUCT_PID(vdo) (((vdo) >> 16) & 0xffff) /* - * UFP VDO1 + * UFP VDO (PD Revision 3.0+ only) * -------- * <31:29> :: UFP VDO version * <28> :: Reserved * <27:24> :: Device capability - * <23:6> :: Reserved + * <23:22> :: Connector type (10b == receptacle, 11b == captive plug) + * <21:11> :: Reserved + * <10:8> :: Vconn power (AMA only) + * <7> :: Vconn required (AMA only, 0b == no, 1b == yes) + * <6> :: Vbus required (AMA only, 0b == yes, 1b == no) * <5:3> :: Alternate modes * <2:0> :: USB highest speed */ -#define PD_VDO1_UFP_DEVCAP(vdo) (((vdo) & GENMASK(27, 24)) >> 24) +#define PD_VDO_UFP_DEVCAP(vdo) (((vdo) & GENMASK(27, 24)) >> 24) + +/* UFP VDO Version */ +#define UFP_VDO_VER1_2 2 +/* Device Capability */ #define DEV_USB2_CAPABLE BIT(0) #define DEV_USB2_BILLBOARD BIT(1) #define DEV_USB3_CAPABLE BIT(2) #define DEV_USB4_CAPABLE BIT(3) +/* Connector Type */ +#define UFP_RECEPTACLE 2 +#define UFP_CAPTIVE 3 + +/* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required) */ +#define AMA_VCONN_PWR_1W 0 +#define AMA_VCONN_PWR_1W5 1 +#define AMA_VCONN_PWR_2W 2 +#define AMA_VCONN_PWR_3W 3 +#define AMA_VCONN_PWR_4W 4 +#define AMA_VCONN_PWR_5W 5 +#define AMA_VCONN_PWR_6W 6 + +/* Vconn Required (AMA only) */ +#define AMA_VCONN_NOT_REQ 0 +#define AMA_VCONN_REQ 1 + +/* Vbus Required (AMA only) */ +#define AMA_VBUS_REQ 0 +#define AMA_VBUS_NOT_REQ 1 + +/* Alternate Modes */ +#define UFP_ALTMODE_NOT_SUPP 0 +#define UFP_ALTMODE_TBT3 BIT(0) +#define UFP_ALTMODE_RECFG BIT(1) +#define UFP_ALTMODE_NO_RECFG BIT(2) + +/* USB Highest Speed */ +#define UFP_USB2_ONLY 0 +#define UFP_USB32_GEN1 1 +#define UFP_USB32_4_GEN2 2 +#define UFP_USB4_GEN3 3 + +#define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd) \ + (((ver) & 0x7) << 29 | ((cap) & 0xf) << 24 | ((conn) & 0x3) << 22 \ + | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3 \ + | ((spd) & 0x7)) + /* - * DFP VDO + * DFP VDO (PD Revision 3.0+ only) * -------- * <31:29> :: DFP VDO version * <28:27> :: Reserved * <26:24> :: Host capability - * <23:5> :: Reserved + * <23:22> :: Connector type (10b == receptacle, 11b == captive plug) + * <21:5> :: Reserved * <4:0> :: Port number */ #define PD_VDO_DFP_HOSTCAP(vdo) (((vdo) & GENMASK(26, 24)) >> 24) +#define DFP_VDO_VER1_1 1 #define HOST_USB2_CAPABLE BIT(0) #define HOST_USB3_CAPABLE BIT(1) #define HOST_USB4_CAPABLE BIT(2) +#define DFP_RECEPTACLE 2 +#define DFP_CAPTIVE 3 + +#define VDO_DFP(ver, cap, conn, pnum) \ + (((ver) & 0x7) << 29 | ((cap) & 0x7) << 24 | ((conn) & 0x3) << 22 \ + | ((pnum) & 0x1f)) /* - * Cable VDO + * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0) * --------- * <31:28> :: Cable HW version * <27:24> :: Cable FW version * <23:20> :: Reserved, Shall be set to zero * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive) - * <17> :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle) + * <17> :: Reserved, Shall be set to zero * <16:13> :: cable latency (0001 == <10ns(~1m length)) * <12:11> :: cable termination type (11b == both ends active VCONN req) * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) * <9> :: SSTX2 Directionality support * <8> :: SSRX1 Directionality support * <7> :: SSRX2 Directionality support - * <6:5> :: Vbus current handling capability + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) * <4> :: Vbus through cable (0b == no, 1b == yes) * <3> :: SOP" controller present? (0b == no, 1b == yes) * <2:0> :: USB SS Signaling support + * + * Passive Cable VDO (PD Rev3.0+) + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:21> :: VDO version + * <20> :: Reserved, Shall be set to zero + * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive) + * <17> :: Reserved, Shall be set to zero + * <16:13> :: cable latency (0001 == <10ns(~1m length)) + * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req) + * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) + * <8:7> :: Reserved, Shall be set to zero + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) + * <4:3> :: Reserved, Shall be set to zero + * <2:0> :: USB highest speed + * + * Active Cable VDO 1 (PD Rev3.0+) + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:21> :: VDO version + * <20> :: Reserved, Shall be set to zero + * <19:18> :: Connector type (10b == C, 11b == Captive) + * <17> :: Reserved, Shall be set to zero + * <16:13> :: cable latency (0001 == <10ns(~1m length)) + * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req) + * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) + * <8> :: SBU supported (0b == supported, 1b == not supported) + * <7> :: SBU type (0b == passive, 1b == active) + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) + * <4> :: Vbus through cable (0b == no, 1b == yes) + * <3> :: SOP" controller present? (0b == no, 1b == yes) + * <2:0> :: USB highest speed */ +/* Cable VDO Version */ +#define CABLE_VDO_VER1_0 0 +#define CABLE_VDO_VER1_3 3 + +/* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */ #define CABLE_ATYPE 0 #define CABLE_BTYPE 1 #define CABLE_CTYPE 2 #define CABLE_CAPTIVE 3 -#define CABLE_PLUG 0 -#define CABLE_RECEPTACLE 1 -#define CABLE_CURR_1A5 0 + +/* Cable Latency */ +#define CABLE_LATENCY_1M 1 +#define CABLE_LATENCY_2M 2 +#define CABLE_LATENCY_3M 3 +#define CABLE_LATENCY_4M 4 +#define CABLE_LATENCY_5M 5 +#define CABLE_LATENCY_6M 6 +#define CABLE_LATENCY_7M 7 +#define CABLE_LATENCY_7M_PLUS 8 + +/* Cable Termination Type */ +#define PCABLE_VCONN_NOT_REQ 0 +#define PCABLE_VCONN_REQ 1 +#define ACABLE_ONE_END 2 +#define ACABLE_BOTH_END 3 + +/* Maximum Vbus Voltage */ +#define CABLE_MAX_VBUS_20V 0 +#define CABLE_MAX_VBUS_30V 1 +#define CABLE_MAX_VBUS_40V 2 +#define CABLE_MAX_VBUS_50V 3 + +/* Active Cable SBU Supported/Type */ +#define ACABLE_SBU_SUPP 0 +#define ACABLE_SBU_NOT_SUPP 1 +#define ACABLE_SBU_PASSIVE 0 +#define ACABLE_SBU_ACTIVE 1 + +/* Vbus Current Handling Capability */ +#define CABLE_CURR_DEF 0 #define CABLE_CURR_3A 1 #define CABLE_CURR_5A 2 + +/* USB SuperSpeed Signaling Support (PD Rev2.0) */ #define CABLE_USBSS_U2_ONLY 0 #define CABLE_USBSS_U31_GEN1 1 #define CABLE_USBSS_U31_GEN2 2 -#define VDO_CABLE(hw, fw, cbl, gdr, lat, term, tx1d, tx2d, rx1d, rx2d, cur,\ - vps, sopp, usbss) \ - (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \ - | (gdr) << 17 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 \ - | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 \ - | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3 \ - | ((usbss) & 0x7)) + +/* USB Highest Speed */ +#define CABLE_USB2_ONLY 0 +#define CABLE_USB32_GEN1 1 +#define CABLE_USB32_4_GEN2 2 +#define CABLE_USB4_GEN3 3 + +#define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \ + | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10 \ + | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5 \ + | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7)) +#define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd) \ + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ + | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ + | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 5 | ((spd) & 0x7)) +#define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt, sopp, spd) \ + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ + | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ + | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5 \ + | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7)) + #define VDO_TYPEC_CABLE_TYPE(vdo) (((vdo) >> 18) & 0x3) /* - * AMA VDO + * Active Cable VDO 2 + * --------- + * <31:24> :: Maximum operating temperature + * <23:16> :: Shutdown temperature + * <15> :: Reserved, Shall be set to zero + * <14:12> :: U3/CLd power + * <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S) + * <10> :: Physical connection (0b == copper, 1b == optical) + * <9> :: Active element (0b == redriver, 1b == retimer) + * <8> :: USB4 supported (0b == yes, 1b == no) + * <7:6> :: USB2 hub hops consumed + * <5> :: USB2 supported (0b == yes, 1b == no) + * <4> :: USB3.2 supported (0b == yes, 1b == no) + * <3> :: USB lanes supported (0b == one lane, 1b == two lanes) + * <2> :: Optically isolated active cable (0b == no, 1b == yes) + * <1> :: Reserved, Shall be set to zero + * <0> :: USB gen (0b == gen1, 1b == gen2+) + */ +/* U3/CLd Power*/ +#define ACAB2_U3_CLD_10MW_PLUS 0 +#define ACAB2_U3_CLD_10MW 1 +#define ACAB2_U3_CLD_5MW 2 +#define ACAB2_U3_CLD_1MW 3 +#define ACAB2_U3_CLD_500UW 4 +#define ACAB2_U3_CLD_200UW 5 +#define ACAB2_U3_CLD_50UW 6 + +/* Other Active Cable VDO 2 Fields */ +#define ACAB2_U3U0_DIRECT 0 +#define ACAB2_U3U0_U3S 1 +#define ACAB2_PHY_COPPER 0 +#define ACAB2_PHY_OPTICAL 1 +#define ACAB2_REDRIVER 0 +#define ACAB2_RETIMER 1 +#define ACAB2_USB4_SUPP 0 +#define ACAB2_USB4_NOT_SUPP 1 +#define ACAB2_USB2_SUPP 0 +#define ACAB2_USB2_NOT_SUPP 1 +#define ACAB2_USB32_SUPP 0 +#define ACAB2_USB32_NOT_SUPP 1 +#define ACAB2_LANES_ONE 0 +#define ACAB2_LANES_TWO 1 +#define ACAB2_OPT_ISO_NO 0 +#define ACAB2_OPT_ISO_YES 1 +#define ACAB2_GEN_1 0 +#define ACAB2_GEN_2_PLUS 1 + +#define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32, lane, iso, gen) \ + (((mtemp) & 0xff) << 24 | ((stemp) & 0xff) << 16 | ((u3p) & 0x7) << 12 \ + | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8 \ + | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3 \ + | (iso) << 2 | (gen)) + +/* + * AMA VDO (PD Rev2.0) * --------- * <31:28> :: Cable HW version * <27:24> :: Cable FW version @@ -244,19 +456,41 @@ #define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1) #define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1) -#define AMA_VCONN_PWR_1W 0 -#define AMA_VCONN_PWR_1W5 1 -#define AMA_VCONN_PWR_2W 2 -#define AMA_VCONN_PWR_3W 3 -#define AMA_VCONN_PWR_4W 4 -#define AMA_VCONN_PWR_5W 5 -#define AMA_VCONN_PWR_6W 6 #define AMA_USBSS_U2_ONLY 0 #define AMA_USBSS_U31_GEN1 1 #define AMA_USBSS_U31_GEN2 2 #define AMA_USBSS_BBONLY 3 /* + * VPD VDO + * --------- + * <31:28> :: HW version + * <27:24> :: FW version + * <23:21> :: VDO version + * <20:17> :: Reserved, Shall be set to zero + * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) + * <14> :: Charge through current support (0b == 3A, 1b == 5A) + * <13> :: Reserved, Shall be set to zero + * <12:7> :: Vbus impedance + * <6:1> :: Ground impedance + * <0> :: Charge through support (0b == no, 1b == yes) + */ +#define VPD_VDO_VER1_0 0 +#define VPD_MAX_VBUS_20V 0 +#define VPD_MAX_VBUS_30V 1 +#define VPD_MAX_VBUS_40V 2 +#define VPD_MAX_VBUS_50V 3 +#define VPDCT_CURR_3A 0 +#define VPDCT_CURR_5A 1 +#define VPDCT_NOT_SUPP 0 +#define VPDCT_SUPP 1 + +#define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct) \ + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ + | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7 \ + | ((gi) & 0x3f) << 1 | (ct)) + +/* * SVDM Discover SVIDs request -> response * * Request is properly formatted VDM Header with discover SVIDs command. diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 1c09b922f8b0..952272002e48 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -260,7 +260,7 @@ struct usb_serial_driver { void (*release)(struct usb_serial *serial); int (*port_probe)(struct usb_serial_port *port); - int (*port_remove)(struct usb_serial_port *port); + void (*port_remove)(struct usb_serial_port *port); int (*suspend)(struct usb_serial *serial, pm_message_t message); int (*resume)(struct usb_serial *serial); diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index f4a18427f5c4..42fcfbe10590 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -19,6 +19,10 @@ enum typec_cc_status { TYPEC_CC_RP_3_0, }; +/* Collision Avoidance */ +#define SINK_TX_NG TYPEC_CC_RP_1_5 +#define SINK_TX_OK TYPEC_CC_RP_3_0 + enum typec_cc_polarity { TYPEC_POLARITY_CC1, TYPEC_POLARITY_CC2, @@ -104,6 +108,10 @@ enum tcpm_transmit_type { * is supported by TCPC, set this callback for TCPM to query * whether vbus is at VSAFE0V when needed. * Returns true when vbus is at VSAFE0V, false otherwise. + * @set_partner_usb_comm_capable: + * Optional; The USB Communications Capable bit indicates if port + * partner is capable of communication over the USB data lines + * (e.g. D+/- or SS Tx/Rx). Called to notify the status of the bit. */ struct tcpc_dev { struct fwnode_handle *fwnode; @@ -135,6 +143,7 @@ struct tcpc_dev { int (*set_auto_vbus_discharge_threshold)(struct tcpc_dev *dev, enum typec_pwr_opmode mode, bool pps_active, u32 requested_vbus_voltage); bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev); + void (*set_partner_usb_comm_capable)(struct tcpc_dev *dev, bool enable); }; struct tcpm_port; diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index c29d1b4c9381..fd1c9f6a4e37 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -79,6 +79,8 @@ struct tegra_usb_phy { bool is_ulpi_phy; struct gpio_desc *reset_gpio; struct reset_control *pad_rst; + bool wakeup_enabled; + bool pad_wakeup; bool powered_on; }; diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index 54475323f83b..91b4303ca305 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -126,6 +126,7 @@ struct typec_altmode_desc { enum typec_port_data roles; }; +void typec_partner_set_pd_revision(struct typec_partner *partner, u16 pd_revision); int typec_partner_set_num_altmodes(struct typec_partner *partner, int num_altmodes); struct typec_altmode *typec_partner_register_altmode(struct typec_partner *partner, @@ -164,6 +165,7 @@ struct typec_plug_desc { * @type: The plug type from USB PD Cable VDO * @active: Is the cable active or passive * @identity: Result of Discover Identity command + * @pd_revision: USB Power Delivery Specification revision if supported * * Represents USB Type-C Cable attached to USB Type-C port. */ @@ -171,6 +173,8 @@ struct typec_cable_desc { enum typec_plug_type type; unsigned int active:1; struct usb_pd_identity *identity; + u16 pd_revision; /* 0300H = "3.0" */ + }; /* @@ -178,15 +182,22 @@ struct typec_cable_desc { * @usb_pd: USB Power Delivery support * @accessory: Audio, Debug or none. * @identity: Discover Identity command data + * @pd_revision: USB Power Delivery Specification Revision if supported * * Details about a partner that is attached to USB Type-C port. If @identity * member exists when partner is registered, a directory named "identity" is * created to sysfs for the partner device. + * + * @pd_revision is based on the setting of the "Specification Revision" field + * in the message header on the initial "Source Capabilities" message received + * from the partner, or a "Request" message received from the partner, depending + * on whether our port is a Sink or a Source. */ struct typec_partner_desc { unsigned int usb_pd:1; enum typec_accessory accessory; struct usb_pd_identity *identity; + u16 pd_revision; /* 0300H = "3.0" */ }; /** @@ -206,12 +217,19 @@ struct typec_operations { enum typec_port_type type); }; +enum usb_pd_svdm_ver { + SVDM_VER_1_0 = 0, + SVDM_VER_2_0 = 1, + SVDM_VER_MAX = SVDM_VER_2_0, +}; + /* * struct typec_capability - USB Type-C Port Capabilities * @type: Supported power role of the port * @data: Supported data role of the port * @revision: USB Type-C Specification release. Binary coded decimal * @pd_revision: USB Power Delivery Specification revision if supported + * @svdm_version: USB PD Structured VDM version if supported * @prefer_role: Initial role preference (DRP ports). * @accessory: Supported Accessory Modes * @fwnode: Optional fwnode of the port @@ -225,6 +243,7 @@ struct typec_capability { enum typec_port_data data; u16 revision; /* 0120H = "1.2" */ u16 pd_revision; /* 0300H = "3.0" */ + enum usb_pd_svdm_ver svdm_version; int prefer_role; enum typec_accessory accessory[TYPEC_MAX_ACCESSORY]; unsigned int orientation_aware:1; @@ -275,4 +294,8 @@ int typec_find_orientation(const char *name); int typec_find_port_power_role(const char *name); int typec_find_power_role(const char *name); int typec_find_port_data_role(const char *name); + +void typec_partner_set_svdm_version(struct typec_partner *partner, + enum usb_pd_svdm_ver svdm_version); +int typec_get_negotiated_svdm_version(struct typec_port *port); #endif /* __LINUX_USB_TYPEC_H */ diff --git a/include/linux/usb/typec_altmode.h b/include/linux/usb/typec_altmode.h index 5e0a7b7647c3..65933cbe9129 100644 --- a/include/linux/usb/typec_altmode.h +++ b/include/linux/usb/typec_altmode.h @@ -133,6 +133,16 @@ typec_altmode_get_orientation(struct typec_altmode *altmode) } /** + * typec_altmode_get_svdm_version - Get negotiated SVDM version + * @altmode: Handle to the alternate mode + */ +static inline int +typec_altmode_get_svdm_version(struct typec_altmode *altmode) +{ + return typec_get_negotiated_svdm_version(typec_altmode2port(altmode)); +} + +/** * struct typec_altmode_driver - USB Type-C alternate mode device driver * @id_table: Null terminated array of SVIDs * @probe: Callback for device binding diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index 0f865ae4ba89..17ce56198c9a 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -968,9 +968,22 @@ struct usb_ssp_cap_descriptor { __le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */ #define USB_SSP_SUBLINK_SPEED_SSID (0xf) /* sublink speed ID */ #define USB_SSP_SUBLINK_SPEED_LSE (0x3 << 4) /* Lanespeed exponent */ +#define USB_SSP_SUBLINK_SPEED_LSE_BPS 0 +#define USB_SSP_SUBLINK_SPEED_LSE_KBPS 1 +#define USB_SSP_SUBLINK_SPEED_LSE_MBPS 2 +#define USB_SSP_SUBLINK_SPEED_LSE_GBPS 3 + #define USB_SSP_SUBLINK_SPEED_ST (0x3 << 6) /* Sublink type */ +#define USB_SSP_SUBLINK_SPEED_ST_SYM_RX 0 +#define USB_SSP_SUBLINK_SPEED_ST_ASYM_RX 1 +#define USB_SSP_SUBLINK_SPEED_ST_SYM_TX 2 +#define USB_SSP_SUBLINK_SPEED_ST_ASYM_TX 3 + #define USB_SSP_SUBLINK_SPEED_RSVD (0x3f << 8) /* Reserved */ #define USB_SSP_SUBLINK_SPEED_LP (0x3 << 14) /* Link protocol */ +#define USB_SSP_SUBLINK_SPEED_LP_SS 0 +#define USB_SSP_SUBLINK_SPEED_LP_SSP 1 + #define USB_SSP_SUBLINK_SPEED_LSM (0xff << 16) /* Lanespeed mantissa */ } __attribute__((packed)); diff --git a/include/uapi/linux/usb/tmc.h b/include/uapi/linux/usb/tmc.h index fdd4d88a7b95..d791cc58a7f0 100644 --- a/include/uapi/linux/usb/tmc.h +++ b/include/uapi/linux/usb/tmc.h @@ -102,6 +102,9 @@ struct usbtmc_message { #define USBTMC_IOCTL_MSG_IN_ATTR _IOR(USBTMC_IOC_NR, 24, __u8) #define USBTMC_IOCTL_AUTO_ABORT _IOW(USBTMC_IOC_NR, 25, __u8) +#define USBTMC_IOCTL_GET_STB _IOR(USBTMC_IOC_NR, 26, __u8) +#define USBTMC_IOCTL_GET_SRQ_STB _IOR(USBTMC_IOC_NR, 27, __u8) + /* Cancel and cleanup asynchronous calls */ #define USBTMC_IOCTL_CANCEL_IO _IO(USBTMC_IOC_NR, 35) #define USBTMC_IOCTL_CLEANUP_IO _IO(USBTMC_IOC_NR, 36) |