diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/platform_data/cros_ec_proto.h | 138 | ||||
| -rw-r--r-- | include/linux/platform_data/cros_ec_sensorhub.h | 30 | ||||
| -rw-r--r-- | include/linux/platform_data/wilco-ec.h | 15 |
3 files changed, 72 insertions, 111 deletions
diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index eab7036cda09..30098a551523 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -12,6 +12,7 @@ #include <linux/mutex.h> #include <linux/notifier.h> +#include <linux/mfd/cros_ec.h> #include <linux/platform_data/cros_ec_commands.h> #define CROS_EC_DEV_NAME "cros_ec" @@ -115,12 +116,16 @@ struct cros_ec_command { * code. * @pkt_xfer: Send packet to EC and get response. * @lock: One transaction at a time. - * @mkbp_event_supported: True if this EC supports the MKBP event protocol. + * @mkbp_event_supported: 0 if MKBP not supported. Otherwise its value is + * the maximum supported version of the MKBP host event + * command + 1. * @host_sleep_v1: True if this EC supports the sleep v1 command. * @event_notifier: Interrupt event notifier for transport devices. * @event_data: Raw payload transferred with the MKBP event. * @event_size: Size in bytes of the event data. * @host_event_wake_mask: Mask of host events that cause wake from suspend. + * @last_event_time: exact time from the hard irq when we got notified of + * a new event. * @ec: The platform_device used by the mfd driver to interface with the * main EC. * @pd: The platform_device used by the mfd driver to interface with the @@ -153,7 +158,7 @@ struct cros_ec_device { int (*pkt_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg); struct mutex lock; - bool mkbp_event_supported; + u8 mkbp_event_supported; bool host_sleep_v1; struct blocking_notifier_head event_notifier; @@ -161,6 +166,7 @@ struct cros_ec_device { int event_size; u32 host_event_wake_mask; u32 last_resume_result; + ktime_t last_event_time; /* The platform devices used by the mfd driver */ struct platform_device *ec; @@ -168,14 +174,6 @@ struct cros_ec_device { }; /** - * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information. - * @sensor_num: Id of the sensor, as reported by the EC. - */ -struct cros_ec_sensor_platform { - u8 sensor_num; -}; - -/** * struct cros_ec_platform - ChromeOS EC platform information. * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...) * used in /dev/ and sysfs. @@ -187,133 +185,51 @@ struct cros_ec_platform { u16 cmd_offset; }; -/** - * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device. - * @ec_dev: Device to suspend. - * - * This can be called by drivers to handle a suspend event. - * - * Return: 0 on success or negative error code. - */ int cros_ec_suspend(struct cros_ec_device *ec_dev); -/** - * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device. - * @ec_dev: Device to resume. - * - * This can be called by drivers to handle a resume event. - * - * Return: 0 on success or negative error code. - */ int cros_ec_resume(struct cros_ec_device *ec_dev); -/** - * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer. - * @ec_dev: Device to register. - * @msg: Message to write. - * - * This is intended to be used by all ChromeOS EC drivers, but at present - * only SPI uses it. Once LPC uses the same protocol it can start using it. - * I2C could use it now, with a refactor of the existing code. - * - * Return: 0 on success or negative error code. - */ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); -/** - * cros_ec_check_result() - Check ec_msg->result. - * @ec_dev: EC device. - * @msg: Message to check. - * - * This is used by ChromeOS EC drivers to check the ec_msg->result for - * errors and to warn about them. - * - * Return: 0 on success or negative error code. - */ int cros_ec_check_result(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); -/** - * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC. - * @ec_dev: EC device. - * @msg: Message to write. - * - * Call this to send a command to the ChromeOS EC. This should be used - * instead of calling the EC's cmd_xfer() callback directly. - * - * Return: 0 on success or negative error code. - */ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); -/** - * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC. - * @ec_dev: EC device. - * @msg: Message to write. - * - * This function is identical to cros_ec_cmd_xfer, except it returns success - * status only if both the command was transmitted successfully and the EC - * replied with success status. It's not necessary to check msg->result when - * using this function. - * - * Return: The number of bytes transferred on success or negative error code. - */ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); -/** - * cros_ec_register() - Register a new ChromeOS EC, using the provided info. - * @ec_dev: Device to register. - * - * Before calling this, allocate a pointer to a new device and then fill - * in all the fields up to the --private-- marker. - * - * Return: 0 on success or negative error code. - */ int cros_ec_register(struct cros_ec_device *ec_dev); -/** - * cros_ec_unregister() - Remove a ChromeOS EC. - * @ec_dev: Device to unregister. - * - * Call this to deregister a ChromeOS EC, then clean up any private data. - * - * Return: 0 on success or negative error code. - */ int cros_ec_unregister(struct cros_ec_device *ec_dev); -/** - * cros_ec_query_all() - Query the protocol version supported by the - * ChromeOS EC. - * @ec_dev: Device to register. - * - * Return: 0 on success or negative error code. - */ int cros_ec_query_all(struct cros_ec_device *ec_dev); -/** - * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC. - * @ec_dev: Device to fetch event from. - * @wake_event: Pointer to a bool set to true upon return if the event might be - * treated as a wake event. Ignored if null. - * - * Return: negative error code on errors; 0 for no data; or else number of - * bytes received (i.e., an event was retrieved successfully). Event types are - * written out to @ec_dev->event_data.event_type on success. - */ -int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event); +int cros_ec_get_next_event(struct cros_ec_device *ec_dev, + bool *wake_event, + bool *has_more_events); + +u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev); + +int cros_ec_check_features(struct cros_ec_dev *ec, int feature); + +int cros_ec_get_sensor_count(struct cros_ec_dev *ec); + +bool cros_ec_handle_event(struct cros_ec_device *ec_dev); /** - * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC. - * @ec_dev: Device to fetch event from. + * cros_ec_get_time_ns() - Return time in ns. * - * When MKBP is supported, when the EC raises an interrupt, we collect the - * events raised and call the functions in the ec notifier. This function - * is a helper to know which events are raised. + * This is the function used to record the time for last_event_time in struct + * cros_ec_device during the hard irq. * - * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*. + * Return: ktime_t format since boot. */ -u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev); +static inline ktime_t cros_ec_get_time_ns(void) +{ + return ktime_get_boottime_ns(); +} #endif /* __LINUX_CROS_EC_PROTO_H */ diff --git a/include/linux/platform_data/cros_ec_sensorhub.h b/include/linux/platform_data/cros_ec_sensorhub.h new file mode 100644 index 000000000000..bef7ffc7fce1 --- /dev/null +++ b/include/linux/platform_data/cros_ec_sensorhub.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Chrome OS EC MEMS Sensor Hub driver. + * + * Copyright 2019 Google LLC + */ + +#ifndef __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H +#define __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H + +#include <linux/platform_data/cros_ec_commands.h> + +/** + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information. + * @sensor_num: Id of the sensor, as reported by the EC. + */ +struct cros_ec_sensor_platform { + u8 sensor_num; +}; + +/** + * struct cros_ec_sensorhub - Sensor Hub device data. + * + * @ec: Embedded Controller where the hub is located. + */ +struct cros_ec_sensorhub { + struct cros_ec_dev *ec; +}; + +#endif /* __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H */ diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h index ad03b586a095..afede15a95bf 100644 --- a/include/linux/platform_data/wilco-ec.h +++ b/include/linux/platform_data/wilco-ec.h @@ -29,6 +29,7 @@ * @data_size: Size of the data buffer used for EC communication. * @debugfs_pdev: The child platform_device used by the debugfs sub-driver. * @rtc_pdev: The child platform_device used by the RTC sub-driver. + * @charger_pdev: Child platform_device used by the charger config sub-driver. * @telem_pdev: The child platform_device used by the telemetry sub-driver. */ struct wilco_ec_device { @@ -41,6 +42,7 @@ struct wilco_ec_device { size_t data_size; struct platform_device *debugfs_pdev; struct platform_device *rtc_pdev; + struct platform_device *charger_pdev; struct platform_device *telem_pdev; }; @@ -120,6 +122,19 @@ struct wilco_ec_message { */ int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg); +/** + * wilco_keyboard_leds_init() - Set up the keyboard backlight LEDs. + * @ec: EC device to query. + * + * After this call, the keyboard backlight will be exposed through a an LED + * device at /sys/class/leds. + * + * This may sleep because it uses wilco_ec_mailbox(). + * + * Return: 0 on success, negative error code on failure. + */ +int wilco_keyboard_leds_init(struct wilco_ec_device *ec); + /* * A Property is typically a data item that is stored to NVRAM * by the EC. Each of these data items has an index associated |