diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/Kbuild | 1 | ||||
| -rw-r--r-- | include/linux/usb/atmel_usba_udc.h | 1 | ||||
| -rw-r--r-- | include/linux/usb/audio.h | 120 | ||||
| -rw-r--r-- | include/linux/usb/ch9.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/musb.h | 26 | ||||
| -rw-r--r-- | include/linux/usb/otg.h | 35 | ||||
| -rw-r--r-- | include/linux/usb/quirks.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 13 | ||||
| -rw-r--r-- | include/linux/usb/usbnet.h | 21 | ||||
| -rw-r--r-- | include/linux/usb/vstusb.h | 71 |
10 files changed, 175 insertions, 118 deletions
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index 54c446309a2a..29fd73b0bffc 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -5,4 +5,3 @@ header-y += gadgetfs.h header-y += midi.h header-y += g_printer.h header-y += tmc.h -header-y += vstusb.h diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h index 6311fa2d9f82..baf41c8616e9 100644 --- a/include/linux/usb/atmel_usba_udc.h +++ b/include/linux/usb/atmel_usba_udc.h @@ -15,6 +15,7 @@ struct usba_ep_data { struct usba_platform_data { int vbus_pin; + int vbus_pin_inverted; int num_ep; struct usba_ep_data ep[0]; }; diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index eaf9dffe0a01..6bb293684eb8 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -25,6 +25,9 @@ #define USB_SUBCLASS_AUDIOSTREAMING 0x02 #define USB_SUBCLASS_MIDISTREAMING 0x03 +#define UAC_VERSION_1 0x00 +#define UAC_VERSION_2 0x20 + /* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ #define UAC_HEADER 0x01 #define UAC_INPUT_TERMINAL 0x02 @@ -32,8 +35,17 @@ #define UAC_MIXER_UNIT 0x04 #define UAC_SELECTOR_UNIT 0x05 #define UAC_FEATURE_UNIT 0x06 -#define UAC_PROCESSING_UNIT 0x07 -#define UAC_EXTENSION_UNIT 0x08 +#define UAC_PROCESSING_UNIT_V1 0x07 +#define UAC_EXTENSION_UNIT_V1 0x08 + +/* UAC v2.0 types */ +#define UAC_EFFECT_UNIT 0x07 +#define UAC_PROCESSING_UNIT_V2 0x08 +#define UAC_EXTENSION_UNIT_V2 0x09 +#define UAC_CLOCK_SOURCE 0x0a +#define UAC_CLOCK_SELECTOR 0x0b +#define UAC_CLOCK_MULTIPLIER 0x0c +#define UAC_SAMPLE_RATE_CONVERTER 0x0d /* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ #define UAC_AS_GENERAL 0x01 @@ -66,6 +78,10 @@ #define UAC_GET_STAT 0xff +/* Audio class v2.0 handles all the parameter calls differently */ +#define UAC2_CS_CUR 0x01 +#define UAC2_CS_RANGE 0x02 + /* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ #define UAC_MS_HEADER 0x01 #define UAC_MIDI_IN_JACK 0x02 @@ -81,7 +97,7 @@ /* Terminal Control Selectors */ /* 4.3.2 Class-Specific AC Interface Descriptor */ -struct uac_ac_header_descriptor { +struct uac_ac_header_descriptor_v1 { __u8 bLength; /* 8 + n */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ @@ -95,7 +111,7 @@ struct uac_ac_header_descriptor { /* As above, but more useful for defining your own descriptors: */ #define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ -struct uac_ac_header_descriptor_##n { \ +struct uac_ac_header_descriptor_v1_##n { \ __u8 bLength; \ __u8 bDescriptorType; \ __u8 bDescriptorSubtype; \ @@ -130,8 +146,12 @@ struct uac_input_terminal_descriptor { #define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 #define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 +/* Terminals - control selectors */ + +#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 + /* 4.3.2.2 Output Terminal Descriptor */ -struct uac_output_terminal_descriptor { +struct uac_output_terminal_descriptor_v1 { __u8 bLength; /* in bytes: 9 */ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ @@ -171,7 +191,7 @@ struct uac_feature_unit_descriptor_##ch { \ } __attribute__ ((packed)) /* 4.5.2 Class-Specific AS Interface Descriptor */ -struct uac_as_header_descriptor { +struct uac_as_header_descriptor_v1 { __u8 bLength; /* in bytes: 7 */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* AS_GENERAL */ @@ -180,6 +200,19 @@ struct uac_as_header_descriptor { __le16 wFormatTag; /* The Audio Data Format */ } __attribute__ ((packed)); +struct uac_as_header_descriptor_v2 { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bTerminalLink; + __u8 bmControls; + __u8 bFormatType; + __u32 bmFormats; + __u8 bNrChannels; + __u32 bmChannelConfig; + __u8 iChannelNames; +} __attribute__((packed)); + #define UAC_DT_AS_HEADER_SIZE 7 /* Formats - A.1.1 Audio Data Format Type I Codes */ @@ -232,11 +265,62 @@ struct uac_format_type_i_discrete_descriptor_##n { \ #define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) +struct uac_format_type_i_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bSubslotSize; + __u8 bFormatType; + __u8 bBitResolution; + __u8 bHeaderLength; + __u8 bControlSize; + __u8 bSideBandProtocol; +} __attribute__((packed)); + + +/* Formats - Audio Data Format Type I Codes */ + +#define UAC_FORMAT_TYPE_II_MPEG 0x1001 +#define UAC_FORMAT_TYPE_II_AC3 0x1002 + +struct uac_format_type_ii_discrete_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __le16 wMaxBitRate; + __le16 wSamplesPerFrame; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__((packed)); + +struct uac_format_type_ii_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u16 wMaxBitRate; + __u16 wSamplesPerFrame; + __u8 bHeaderLength; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* type III */ +#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 + /* Formats - A.2 Format Type Codes */ #define UAC_FORMAT_TYPE_UNDEFINED 0x0 #define UAC_FORMAT_TYPE_I 0x1 #define UAC_FORMAT_TYPE_II 0x2 #define UAC_FORMAT_TYPE_III 0x3 +#define UAC_EXT_FORMAT_TYPE_I 0x81 +#define UAC_EXT_FORMAT_TYPE_II 0x82 +#define UAC_EXT_FORMAT_TYPE_III 0x83 struct uac_iso_endpoint_descriptor { __u8 bLength; /* in bytes: 7 */ @@ -252,7 +336,31 @@ struct uac_iso_endpoint_descriptor { #define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 #define UAC_EP_CS_ATTR_FILL_MAX 0x80 +/* Audio class v2.0: CLOCK_SOURCE descriptor */ + +struct uac_clock_source_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bClockID; + __u8 bmAttributes; + __u8 bmControls; + __u8 bAssocTerminal; + __u8 iClockSource; +} __attribute__((packed)); + /* A.10.2 Feature Unit Control Selectors */ + +struct uac_feature_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bSourceID; + __u8 bControlSize; + __u8 controls[0]; /* variable length */ +} __attribute__((packed)); + #define UAC_FU_CONTROL_UNDEFINED 0x00 #define UAC_MUTE_CONTROL 0x01 #define UAC_VOLUME_CONTROL 0x02 diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 94012e649d86..e58369ff8168 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -775,7 +775,7 @@ enum usb_device_speed { USB_SPEED_UNKNOWN = 0, /* enumerating */ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ + USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ USB_SPEED_SUPER, /* usb 3.0 */ }; diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index d43755669261..7acef0234c0e 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -30,26 +30,26 @@ struct musb_hdrc_eps_bits { struct musb_hdrc_config { /* MUSB configuration-specific details */ unsigned multipoint:1; /* multipoint device */ - unsigned dyn_fifo:1; /* supports dynamic fifo sizing */ - unsigned soft_con:1; /* soft connect required */ - unsigned utm_16:1; /* utm data witdh is 16 bits */ + unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */ + unsigned soft_con:1 __deprecated; /* soft connect required */ + unsigned utm_16:1 __deprecated; /* utm data witdh is 16 bits */ unsigned big_endian:1; /* true if CPU uses big-endian */ unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */ unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */ unsigned high_iso_tx:1; /* Tx ep required for HB iso */ unsigned high_iso_rx:1; /* Rx ep required for HD iso */ - unsigned dma:1; /* supports DMA */ - unsigned vendor_req:1; /* vendor registers required */ + unsigned dma:1 __deprecated; /* supports DMA */ + unsigned vendor_req:1 __deprecated; /* vendor registers required */ u8 num_eps; /* number of endpoints _with_ ep0 */ - u8 dma_channels; /* number of dma channels */ + u8 dma_channels __deprecated; /* number of dma channels */ u8 dyn_fifo_size; /* dynamic size in bytes */ - u8 vendor_ctrl; /* vendor control reg width */ - u8 vendor_stat; /* vendor status reg witdh */ - u8 dma_req_chan; /* bitmask for required dma channels */ + u8 vendor_ctrl __deprecated; /* vendor control reg width */ + u8 vendor_stat __deprecated; /* vendor status reg witdh */ + u8 dma_req_chan __deprecated; /* bitmask for required dma channels */ u8 ram_bits; /* ram address size */ - struct musb_hdrc_eps_bits *eps_bits; + struct musb_hdrc_eps_bits *eps_bits __deprecated; #ifdef CONFIG_BLACKFIN /* A GPIO controlling VRSEL in Blackfin */ unsigned int gpio_vrsel; @@ -76,6 +76,9 @@ struct musb_hdrc_platform_data { /* (HOST or OTG) msec/2 after VBUS on till power good */ u8 potpgt; + /* (HOST or OTG) program PHY for external Vbus */ + unsigned extvbus:1; + /* Power the device on or off */ int (*set_power)(int state); @@ -84,6 +87,9 @@ struct musb_hdrc_platform_data { /* MUSB configuration-specific details */ struct musb_hdrc_config *config; + + /* Architecture specific board data */ + void *board_data; }; diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 52bb917641f0..f8302d036a76 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -9,6 +9,8 @@ #ifndef __LINUX_USB_OTG_H #define __LINUX_USB_OTG_H +#include <linux/notifier.h> + /* OTG defines lots of enumeration states before device reset */ enum usb_otg_state { OTG_STATE_UNDEFINED = 0, @@ -33,6 +35,14 @@ enum usb_otg_state { OTG_STATE_A_VBUS_ERR, }; +enum usb_xceiv_events { + USB_EVENT_NONE, /* no events or cable disconnected */ + USB_EVENT_VBUS, /* vbus valid event */ + USB_EVENT_ID, /* id was grounded */ + USB_EVENT_CHARGER, /* usb dedicated charger */ + USB_EVENT_ENUMERATED, /* gadget driver enumerated */ +}; + #define USB_OTG_PULLUP_ID (1 << 0) #define USB_OTG_PULLDOWN_DP (1 << 1) #define USB_OTG_PULLDOWN_DM (1 << 2) @@ -70,6 +80,9 @@ struct otg_transceiver { struct otg_io_access_ops *io_ops; void __iomem *io_priv; + /* for notification of usb_xceiv_events */ + struct blocking_notifier_head notifier; + /* to pass extra port status to the root hub */ u16 port_status; u16 port_change; @@ -110,9 +123,19 @@ struct otg_transceiver { /* for board-specific init logic */ extern int otg_set_transceiver(struct otg_transceiver *); +#if defined(CONFIG_NOP_USB_XCEIV) || defined(CONFIG_NOP_USB_XCEIV_MODULE) /* sometimes transceivers are accessed only through e.g. ULPI */ extern void usb_nop_xceiv_register(void); extern void usb_nop_xceiv_unregister(void); +#else +static inline void usb_nop_xceiv_register(void) +{ +} + +static inline void usb_nop_xceiv_unregister(void) +{ +} +#endif /* helpers for direct access thru low-level io interface */ static inline int otg_io_read(struct otg_transceiver *otg, u32 reg) @@ -203,6 +226,18 @@ otg_start_srp(struct otg_transceiver *otg) return otg->start_srp(otg); } +/* notifiers */ +static inline int +otg_register_notifier(struct otg_transceiver *otg, struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&otg->notifier, nb); +} + +static inline void +otg_unregister_notifier(struct otg_transceiver *otg, struct notifier_block *nb) +{ + blocking_notifier_chain_unregister(&otg->notifier, nb); +} /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 2526f3bbd273..0a555dd131fc 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -19,4 +19,7 @@ /* device can't handle its Configuration or Interface strings */ #define USB_QUIRK_CONFIG_INTF_STRINGS 0x00000008 +/*device will morph if reset, don't use reset for handling errors */ +#define USB_QUIRK_RESET_MORPHS 0x00000010 + #endif /* __LINUX_USB_QUIRKS_H */ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 1819396ed501..0a458b861933 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -351,14 +351,11 @@ static inline void usb_serial_debug_data(int debug, /* Use our own dbg macro */ #undef dbg -#define dbg(format, arg...) \ - do { \ - if (debug) \ - printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , \ - ## arg); \ - } while (0) - - +#define dbg(format, arg...) \ +do { \ + if (debug) \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ +} while (0) #endif /* __LINUX_USB_SERIAL_H */ diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 8ce61359bf73..df1e83dd9a54 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -214,25 +214,4 @@ extern void usbnet_set_msglevel (struct net_device *, u32); extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *); extern int usbnet_nway_reset(struct net_device *net); -/* messaging support includes the interface name, so it must not be - * used before it has one ... notably, in minidriver bind() calls. - */ -#ifdef DEBUG -#define devdbg(usbnet, fmt, arg...) \ - printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg) -#else -#define devdbg(usbnet, fmt, arg...) \ - ({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \ - ## arg); 0; }) -#endif - -#define deverr(usbnet, fmt, arg...) \ - printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg) -#define devwarn(usbnet, fmt, arg...) \ - printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg) - -#define devinfo(usbnet, fmt, arg...) \ - printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \ - - #endif /* __LINUX_USB_USBNET_H */ diff --git a/include/linux/usb/vstusb.h b/include/linux/usb/vstusb.h deleted file mode 100644 index 1cfac67191ff..000000000000 --- a/include/linux/usb/vstusb.h +++ /dev/null @@ -1,71 +0,0 @@ -/***************************************************************************** - * File: drivers/usb/misc/vstusb.h - * - * Purpose: Support for the bulk USB Vernier Spectrophotometers - * - * Author: EQware Engineering, Inc. - * Oregon City, OR, USA 97045 - * - * Copyright: 2007, 2008 - * Vernier Software & Technology - * Beaverton, OR, USA 97005 - * - * Web: www.vernier.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - *****************************************************************************/ -/***************************************************************************** - * - * The vstusb module is a standard usb 'client' driver running on top of the - * standard usb host controller stack. - * - * In general, vstusb supports standard bulk usb pipes. It supports multiple - * devices and multiple pipes per device. - * - * The vstusb driver supports two interfaces: - * 1 - ioctl SEND_PIPE/RECV_PIPE - a general bulk write/read msg - * interface to any pipe with timeout support; - * 2 - standard read/write with ioctl config - offers standard read/write - * interface with ioctl configured pipes and timeouts. - * - * Both interfaces can be signal from other process and will abort its i/o - * operation. - * - * A timeout of 0 means NO timeout. The user can still terminate the read via - * signal. - * - * If using multiple threads with this driver, the user should ensure that - * any reads, writes, or ioctls are complete before closing the device. - * Changing read/write timeouts or pipes takes effect on next read/write. - * - *****************************************************************************/ - -struct vstusb_args { - union { - /* this struct is used for IOCTL_VSTUSB_SEND_PIPE, * - * IOCTL_VSTUSB_RECV_PIPE, and read()/write() fops */ - struct { - void __user *buffer; - size_t count; - unsigned int timeout_ms; - int pipe; - }; - - /* this one is used for IOCTL_VSTUSB_CONFIG_RW */ - struct { - int rd_pipe; - int rd_timeout_ms; - int wr_pipe; - int wr_timeout_ms; - }; - }; -}; - -#define VST_IOC_MAGIC 'L' -#define VST_IOC_FIRST 0x20 -#define IOCTL_VSTUSB_SEND_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST) -#define IOCTL_VSTUSB_RECV_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 1) -#define IOCTL_VSTUSB_CONFIG_RW _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 2) |