diff options
Diffstat (limited to 'include/linux/mtd/rawnand.h')
| -rw-r--r-- | include/linux/mtd/rawnand.h | 368 |
1 files changed, 367 insertions, 1 deletions
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index f8f27c6801a6..469dc724f5df 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -735,6 +735,350 @@ struct nand_manufacturer_ops { }; /** + * struct nand_op_cmd_instr - Definition of a command instruction + * @opcode: the command to issue in one cycle + */ +struct nand_op_cmd_instr { + u8 opcode; +}; + +/** + * struct nand_op_addr_instr - Definition of an address instruction + * @naddrs: length of the @addrs array + * @addrs: array containing the address cycles to issue + */ +struct nand_op_addr_instr { + unsigned int naddrs; + const u8 *addrs; +}; + +/** + * struct nand_op_data_instr - Definition of a data instruction + * @len: number of data bytes to move + * @in: buffer to fill when reading from the NAND chip + * @out: buffer to read from when writing to the NAND chip + * @force_8bit: force 8-bit access + * + * Please note that "in" and "out" are inverted from the ONFI specification + * and are from the controller perspective, so a "in" is a read from the NAND + * chip while a "out" is a write to the NAND chip. + */ +struct nand_op_data_instr { + unsigned int len; + union { + void *in; + const void *out; + } buf; + bool force_8bit; +}; + +/** + * struct nand_op_waitrdy_instr - Definition of a wait ready instruction + * @timeout_ms: maximum delay while waiting for the ready/busy pin in ms + */ +struct nand_op_waitrdy_instr { + unsigned int timeout_ms; +}; + +/** + * enum nand_op_instr_type - Definition of all instruction types + * @NAND_OP_CMD_INSTR: command instruction + * @NAND_OP_ADDR_INSTR: address instruction + * @NAND_OP_DATA_IN_INSTR: data in instruction + * @NAND_OP_DATA_OUT_INSTR: data out instruction + * @NAND_OP_WAITRDY_INSTR: wait ready instruction + */ +enum nand_op_instr_type { + NAND_OP_CMD_INSTR, + NAND_OP_ADDR_INSTR, + NAND_OP_DATA_IN_INSTR, + NAND_OP_DATA_OUT_INSTR, + NAND_OP_WAITRDY_INSTR, +}; + +/** + * struct nand_op_instr - Instruction object + * @type: the instruction type + * @cmd/@addr/@data/@waitrdy: extra data associated to the instruction. + * You'll have to use the appropriate element + * depending on @type + * @delay_ns: delay the controller should apply after the instruction has been + * issued on the bus. Most modern controllers have internal timings + * control logic, and in this case, the controller driver can ignore + * this field. + */ +struct nand_op_instr { + enum nand_op_instr_type type; + union { + struct nand_op_cmd_instr cmd; + struct nand_op_addr_instr addr; + struct nand_op_data_instr data; + struct nand_op_waitrdy_instr waitrdy; + } ctx; + unsigned int delay_ns; +}; + +/* + * Special handling must be done for the WAITRDY timeout parameter as it usually + * is either tPROG (after a prog), tR (before a read), tRST (during a reset) or + * tBERS (during an erase) which all of them are u64 values that cannot be + * divided by usual kernel macros and must be handled with the special + * DIV_ROUND_UP_ULL() macro. + */ +#define __DIVIDE(dividend, divisor) ({ \ + sizeof(dividend) == sizeof(u32) ? \ + DIV_ROUND_UP(dividend, divisor) : \ + DIV_ROUND_UP_ULL(dividend, divisor); \ + }) +#define PSEC_TO_NSEC(x) __DIVIDE(x, 1000) +#define PSEC_TO_MSEC(x) __DIVIDE(x, 1000000000) + +#define NAND_OP_CMD(id, ns) \ + { \ + .type = NAND_OP_CMD_INSTR, \ + .ctx.cmd.opcode = id, \ + .delay_ns = ns, \ + } + +#define NAND_OP_ADDR(ncycles, cycles, ns) \ + { \ + .type = NAND_OP_ADDR_INSTR, \ + .ctx.addr = { \ + .naddrs = ncycles, \ + .addrs = cycles, \ + }, \ + .delay_ns = ns, \ + } + +#define NAND_OP_DATA_IN(l, b, ns) \ + { \ + .type = NAND_OP_DATA_IN_INSTR, \ + .ctx.data = { \ + .len = l, \ + .buf.in = b, \ + .force_8bit = false, \ + }, \ + .delay_ns = ns, \ + } + +#define NAND_OP_DATA_OUT(l, b, ns) \ + { \ + .type = NAND_OP_DATA_OUT_INSTR, \ + .ctx.data = { \ + .len = l, \ + .buf.out = b, \ + .force_8bit = false, \ + }, \ + .delay_ns = ns, \ + } + +#define NAND_OP_8BIT_DATA_IN(l, b, ns) \ + { \ + .type = NAND_OP_DATA_IN_INSTR, \ + .ctx.data = { \ + .len = l, \ + .buf.in = b, \ + .force_8bit = true, \ + }, \ + .delay_ns = ns, \ + } + +#define NAND_OP_8BIT_DATA_OUT(l, b, ns) \ + { \ + .type = NAND_OP_DATA_OUT_INSTR, \ + .ctx.data = { \ + .len = l, \ + .buf.out = b, \ + .force_8bit = true, \ + }, \ + .delay_ns = ns, \ + } + +#define NAND_OP_WAIT_RDY(tout_ms, ns) \ + { \ + .type = NAND_OP_WAITRDY_INSTR, \ + .ctx.waitrdy.timeout_ms = tout_ms, \ + .delay_ns = ns, \ + } + +/** + * struct nand_subop - a sub operation + * @instrs: array of instructions + * @ninstrs: length of the @instrs array + * @first_instr_start_off: offset to start from for the first instruction + * of the sub-operation + * @last_instr_end_off: offset to end at (excluded) for the last instruction + * of the sub-operation + * + * Both @first_instr_start_off and @last_instr_end_off only apply to data or + * address instructions. + * + * When an operation cannot be handled as is by the NAND controller, it will + * be split by the parser into sub-operations which will be passed to the + * controller driver. + */ +struct nand_subop { + const struct nand_op_instr *instrs; + unsigned int ninstrs; + unsigned int first_instr_start_off; + unsigned int last_instr_end_off; +}; + +int nand_subop_get_addr_start_off(const struct nand_subop *subop, + unsigned int op_id); +int nand_subop_get_num_addr_cyc(const struct nand_subop *subop, + unsigned int op_id); +int nand_subop_get_data_start_off(const struct nand_subop *subop, + unsigned int op_id); +int nand_subop_get_data_len(const struct nand_subop *subop, + unsigned int op_id); + +/** + * struct nand_op_parser_addr_constraints - Constraints for address instructions + * @maxcycles: maximum number of address cycles the controller can issue in a + * single step + */ +struct nand_op_parser_addr_constraints { + unsigned int maxcycles; +}; + +/** + * struct nand_op_parser_data_constraints - Constraints for data instructions + * @maxlen: maximum data length that the controller can handle in a single step + */ +struct nand_op_parser_data_constraints { + unsigned int maxlen; +}; + +/** + * struct nand_op_parser_pattern_elem - One element of a pattern + * @type: the instructuction type + * @optional: whether this element of the pattern is optional or mandatory + * @addr/@data: address or data constraint (number of cycles or data length) + */ +struct nand_op_parser_pattern_elem { + enum nand_op_instr_type type; + bool optional; + union { + struct nand_op_parser_addr_constraints addr; + struct nand_op_parser_data_constraints data; + }; +}; + +#define NAND_OP_PARSER_PAT_CMD_ELEM(_opt) \ + { \ + .type = NAND_OP_CMD_INSTR, \ + .optional = _opt, \ + } + +#define NAND_OP_PARSER_PAT_ADDR_ELEM(_opt, _maxcycles) \ + { \ + .type = NAND_OP_ADDR_INSTR, \ + .optional = _opt, \ + .addr.maxcycles = _maxcycles, \ + } + +#define NAND_OP_PARSER_PAT_DATA_IN_ELEM(_opt, _maxlen) \ + { \ + .type = NAND_OP_DATA_IN_INSTR, \ + .optional = _opt, \ + .data.maxlen = _maxlen, \ + } + +#define NAND_OP_PARSER_PAT_DATA_OUT_ELEM(_opt, _maxlen) \ + { \ + .type = NAND_OP_DATA_OUT_INSTR, \ + .optional = _opt, \ + .data.maxlen = _maxlen, \ + } + +#define NAND_OP_PARSER_PAT_WAITRDY_ELEM(_opt) \ + { \ + .type = NAND_OP_WAITRDY_INSTR, \ + .optional = _opt, \ + } + +/** + * struct nand_op_parser_pattern - NAND sub-operation pattern descriptor + * @elems: array of pattern elements + * @nelems: number of pattern elements in @elems array + * @exec: the function that will issue a sub-operation + * + * A pattern is a list of elements, each element reprensenting one instruction + * with its constraints. The pattern itself is used by the core to match NAND + * chip operation with NAND controller operations. + * Once a match between a NAND controller operation pattern and a NAND chip + * operation (or a sub-set of a NAND operation) is found, the pattern ->exec() + * hook is called so that the controller driver can issue the operation on the + * bus. + * + * Controller drivers should declare as many patterns as they support and pass + * this list of patterns (created with the help of the following macro) to + * the nand_op_parser_exec_op() helper. + */ +struct nand_op_parser_pattern { + const struct nand_op_parser_pattern_elem *elems; + unsigned int nelems; + int (*exec)(struct nand_chip *chip, const struct nand_subop *subop); +}; + +#define NAND_OP_PARSER_PATTERN(_exec, ...) \ + { \ + .exec = _exec, \ + .elems = (struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ }, \ + .nelems = sizeof((struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ }) / \ + sizeof(struct nand_op_parser_pattern_elem), \ + } + +/** + * struct nand_op_parser - NAND controller operation parser descriptor + * @patterns: array of supported patterns + * @npatterns: length of the @patterns array + * + * The parser descriptor is just an array of supported patterns which will be + * iterated by nand_op_parser_exec_op() everytime it tries to execute an + * NAND operation (or tries to determine if a specific operation is supported). + * + * It is worth mentioning that patterns will be tested in their declaration + * order, and the first match will be taken, so it's important to order patterns + * appropriately so that simple/inefficient patterns are placed at the end of + * the list. Usually, this is where you put single instruction patterns. + */ +struct nand_op_parser { + const struct nand_op_parser_pattern *patterns; + unsigned int npatterns; +}; + +#define NAND_OP_PARSER(...) \ + { \ + .patterns = (struct nand_op_parser_pattern[]) { __VA_ARGS__ }, \ + .npatterns = sizeof((struct nand_op_parser_pattern[]) { __VA_ARGS__ }) / \ + sizeof(struct nand_op_parser_pattern), \ + } + +/** + * struct nand_operation - NAND operation descriptor + * @instrs: array of instructions to execute + * @ninstrs: length of the @instrs array + * + * The actual operation structure that will be passed to chip->exec_op(). + */ +struct nand_operation { + const struct nand_op_instr *instrs; + unsigned int ninstrs; +}; + +#define NAND_OPERATION(_instrs) \ + { \ + .instrs = _instrs, \ + .ninstrs = ARRAY_SIZE(_instrs), \ + } + +int nand_op_parser_exec_op(struct nand_chip *chip, + const struct nand_op_parser *parser, + const struct nand_operation *op, bool check_only); + +/** * struct nand_chip - NAND Private Flash Chip Data * @mtd: MTD device registered to the MTD framework * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the @@ -760,6 +1104,10 @@ struct nand_manufacturer_ops { * commands to the chip. * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on * ready. + * @exec_op: controller specific method to execute NAND operations. + * This method replaces ->cmdfunc(), + * ->{read,write}_{buf,byte,word}(), ->dev_ready() and + * ->waifunc(). * @setup_read_retry: [FLASHSPECIFIC] flash (vendor) specific function for * setting the read-retry mode. Mostly needed for MLC NAND. * @ecc: [BOARDSPECIFIC] ECC control structure @@ -859,6 +1207,9 @@ struct nand_chip { void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this); + int (*exec_op)(struct nand_chip *chip, + const struct nand_operation *op, + bool check_only); int (*erase)(struct mtd_info *mtd, int page); int (*scan_bbt)(struct mtd_info *mtd); int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, @@ -869,7 +1220,6 @@ struct nand_chip { int (*setup_data_interface)(struct mtd_info *mtd, int chipnr, const struct nand_data_interface *conf); - int chip_delay; unsigned int options; unsigned int bbt_options; @@ -929,6 +1279,15 @@ struct nand_chip { } manufacturer; }; +static inline int nand_exec_op(struct nand_chip *chip, + const struct nand_operation *op) +{ + if (!chip->exec_op) + return -ENOTSUPP; + + return chip->exec_op(chip, op, false); +} + extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops; extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops; @@ -1320,4 +1679,11 @@ void nand_cleanup(struct nand_chip *chip); /* Default extended ID decoding function */ void nand_decode_ext_id(struct nand_chip *chip); + +/* + * External helper for controller drivers that have to implement the WAITRDY + * instruction and have no physical pin to check it. + */ +int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms); + #endif /* __LINUX_MTD_RAWNAND_H */ |