diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/video/backlight/bd6107.c | 24 |
1 files changed, 16 insertions, 8 deletions
diff --git a/drivers/video/backlight/bd6107.c b/drivers/video/backlight/bd6107.c index d344fb03cb86..d5d5fb457e78 100644 --- a/drivers/video/backlight/bd6107.c +++ b/drivers/video/backlight/bd6107.c @@ -11,7 +11,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/fb.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/platform_data/bd6107.h> @@ -71,6 +71,7 @@ struct bd6107 { struct i2c_client *client; struct backlight_device *backlight; struct bd6107_platform_data *pdata; + struct gpio_desc *reset; }; static int bd6107_write(struct bd6107 *bd, u8 reg, u8 data) @@ -94,9 +95,10 @@ static int bd6107_backlight_update_status(struct backlight_device *backlight) bd6107_write(bd, BD6107_MAINCNT1, brightness); bd6107_write(bd, BD6107_LEDCNT1, BD6107_LEDCNT1_LEDONOFF1); } else { - gpio_set_value(bd->pdata->reset, 0); + /* Assert the reset line (gpiolib will handle active low) */ + gpiod_set_value(bd->reset, 1); msleep(24); - gpio_set_value(bd->pdata->reset, 1); + gpiod_set_value(bd->reset, 0); } return 0; @@ -125,8 +127,8 @@ static int bd6107_probe(struct i2c_client *client, struct bd6107 *bd; int ret; - if (pdata == NULL || !pdata->reset) { - dev_err(&client->dev, "No reset GPIO in platform data\n"); + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); return -EINVAL; } @@ -144,10 +146,16 @@ static int bd6107_probe(struct i2c_client *client, bd->client = client; bd->pdata = pdata; - ret = devm_gpio_request_one(&client->dev, pdata->reset, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "reset"); - if (ret < 0) { + /* + * Request the reset GPIO line with GPIOD_OUT_HIGH meaning asserted, + * so in the machine descriptor table (or other hardware description), + * the line should be flagged as active low so this will assert + * the reset. + */ + bd->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(bd->reset)) { dev_err(&client->dev, "unable to request reset GPIO\n"); + ret = PTR_ERR(bd->reset); return ret; } |