summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/ubi/Kconfig2
-rw-r--r--drivers/mtd/ubi/build.c60
-rw-r--r--drivers/mtd/ubi/io.c6
-rw-r--r--drivers/mtd/ubi/kapi.c6
-rw-r--r--drivers/mtd/ubi/scan.c4
-rw-r--r--drivers/mtd/ubi/ubi.h2
-rw-r--r--drivers/mtd/ubi/vtbl.c4
-rw-r--r--drivers/mtd/ubi/wl.c2
8 files changed, 35 insertions, 51 deletions
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 0a8c7ea764ae..f702a163d8df 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -27,7 +27,7 @@ config MTD_UBI_WL_THRESHOLD
The default value should be OK for SLC NAND flashes, NOR flashes and
other flashes which have eraseblock life-cycle 100000 or more.
However, in case of MLC NAND flashes which typically have eraseblock
- life-cycle less then 10000, the threshold should be lessened (e.g.,
+ life-cycle less than 10000, the threshold should be lessened (e.g.,
to 128 or 256, although it does not have to be power of 2).
config MTD_UBI_BEB_RESERVE
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 55c726dde942..13b05cb33b08 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -42,7 +42,6 @@
#include <linux/miscdevice.h>
#include <linux/log2.h>
#include <linux/kthread.h>
-#include <linux/reboot.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include "ubi.h"
@@ -50,6 +49,12 @@
/* Maximum length of the 'mtd=' parameter */
#define MTD_PARAM_LEN_MAX 64
+#ifdef CONFIG_MTD_UBI_MODULE
+#define ubi_is_module() 1
+#else
+#define ubi_is_module() 0
+#endif
+
/**
* struct mtd_dev_param - MTD device parameter description data structure.
* @name: MTD character device node path, MTD device name, or MTD device number
@@ -832,34 +837,6 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
}
/**
- * ubi_reboot_notifier - halt UBI transactions immediately prior to a reboot.
- * @n: reboot notifier object
- * @state: SYS_RESTART, SYS_HALT, or SYS_POWER_OFF
- * @cmd: pointer to command string for RESTART2
- *
- * This function stops the UBI background thread so that the flash device
- * remains quiescent when Linux restarts the system. Any queued work will be
- * discarded, but this function will block until do_work() finishes if an
- * operation is already in progress.
- *
- * This function solves a real-life problem observed on NOR flashes when an
- * PEB erase operation starts, then the system is rebooted before the erase is
- * finishes, and the boot loader gets confused and dies. So we prefer to finish
- * the ongoing operation before rebooting.
- */
-static int ubi_reboot_notifier(struct notifier_block *n, unsigned long state,
- void *cmd)
-{
- struct ubi_device *ubi;
-
- ubi = container_of(n, struct ubi_device, reboot_notifier);
- if (ubi->bgt_thread)
- kthread_stop(ubi->bgt_thread);
- ubi_sync(ubi->ubi_num);
- return NOTIFY_DONE;
-}
-
-/**
* ubi_attach_mtd_dev - attach an MTD device.
* @mtd: MTD device description object
* @ubi_num: number to assign to the new UBI device
@@ -1016,11 +993,6 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
wake_up_process(ubi->bgt_thread);
spin_unlock(&ubi->wl_lock);
- /* Flash device priority is 0 - UBI needs to shut down first */
- ubi->reboot_notifier.priority = 1;
- ubi->reboot_notifier.notifier_call = ubi_reboot_notifier;
- register_reboot_notifier(&ubi->reboot_notifier);
-
ubi_devices[ubi_num] = ubi;
ubi_notify_all(ubi, UBI_VOLUME_ADDED, NULL);
return ubi_num;
@@ -1091,7 +1063,6 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
* Before freeing anything, we have to stop the background thread to
* prevent it from doing anything on this device while we are freeing.
*/
- unregister_reboot_notifier(&ubi->reboot_notifier);
if (ubi->bgt_thread)
kthread_stop(ubi->bgt_thread);
@@ -1241,9 +1212,24 @@ static int __init ubi_init(void)
p->vid_hdr_offs);
mutex_unlock(&ubi_devices_mutex);
if (err < 0) {
- put_mtd_device(mtd);
ubi_err("cannot attach mtd%d", mtd->index);
- goto out_detach;
+ put_mtd_device(mtd);
+
+ /*
+ * Originally UBI stopped initializing on any error.
+ * However, later on it was found out that this
+ * behavior is not very good when UBI is compiled into
+ * the kernel and the MTD devices to attach are passed
+ * through the command line. Indeed, UBI failure
+ * stopped whole boot sequence.
+ *
+ * To fix this, we changed the behavior for the
+ * non-module case, but preserved the old behavior for
+ * the module case, just for compatibility. This is a
+ * little inconsistent, though.
+ */
+ if (ubi_is_module())
+ goto out_detach;
}
}
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 533b1a4b9af1..4b979e34b159 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -64,9 +64,9 @@
* device, e.g., make @ubi->min_io_size = 512 in the example above?
*
* A: because when writing a sub-page, MTD still writes a full 2K page but the
- * bytes which are no relevant to the sub-page are 0xFF. So, basically, writing
- * 4x512 sub-pages is 4 times slower then writing one 2KiB NAND page. Thus, we
- * prefer to use sub-pages only for EV and VID headers.
+ * bytes which are not relevant to the sub-page are 0xFF. So, basically,
+ * writing 4x512 sub-pages is 4 times slower than writing one 2KiB NAND page.
+ * Thus, we prefer to use sub-pages only for EC and VID headers.
*
* As it was noted above, the VID header may start at a non-aligned offset.
* For example, in case of a 2KiB page NAND flash with a 512 bytes sub-page,
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 17f287decc36..69fa4ef03c53 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -488,7 +488,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
*
* This function changes the contents of a logical eraseblock atomically. @buf
* has to contain new logical eraseblock data, and @len - the length of the
- * data, which has to be aligned. The length may be shorter then the logical
+ * data, which has to be aligned. The length may be shorter than the logical
* eraseblock size, ant the logical eraseblock may be appended to more times
* later on. This function guarantees that in case of an unclean reboot the old
* contents is preserved. Returns zero in case of success and a negative error
@@ -571,7 +571,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase);
*
* This function un-maps logical eraseblock @lnum and schedules the
* corresponding physical eraseblock for erasure, so that it will eventually be
- * physically erased in background. This operation is much faster then the
+ * physically erased in background. This operation is much faster than the
* erase operation.
*
* Unlike erase, the un-map operation does not guarantee that the logical
@@ -590,7 +590,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase);
*
* The main and obvious use-case of this function is when the contents of a
* logical eraseblock has to be re-written. Then it is much more efficient to
- * first un-map it, then write new data, rather then first erase it, then write
+ * first un-map it, then write new data, rather than first erase it, then write
* new data. Note, once new data has been written to the logical eraseblock,
* UBI guarantees that the old contents has gone forever. In other words, if an
* unclean reboot happens after the logical eraseblock has been un-mapped and
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index dc5f688699da..aed19f33b8f3 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -231,7 +231,7 @@ static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id,
* case of success this function returns a positive value, in case of failure, a
* negative error code is returned. The success return codes use the following
* bits:
- * o bit 0 is cleared: the first PEB (described by @seb) is newer then the
+ * o bit 0 is cleared: the first PEB (described by @seb) is newer than the
* second PEB (described by @pnum and @vid_hdr);
* o bit 0 is set: the second PEB is newer;
* o bit 1 is cleared: no bit-flips were detected in the newer LEB;
@@ -452,7 +452,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
if (cmp_res & 1) {
/*
- * This logical eraseblock is newer then the one
+ * This logical eraseblock is newer than the one
* found earlier.
*/
err = validate_vid_hdr(vid_hdr, sv, pnum);
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 5176d4886518..a637f0283add 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -350,7 +350,6 @@ struct ubi_wl_entry;
* @bgt_thread: background thread description object
* @thread_enabled: if the background thread is enabled
* @bgt_name: background thread name
- * @reboot_notifier: notifier to terminate background thread before rebooting
*
* @flash_size: underlying MTD device size (in bytes)
* @peb_count: count of physical eraseblocks on the MTD device
@@ -436,7 +435,6 @@ struct ubi_device {
struct task_struct *bgt_thread;
int thread_enabled;
char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
- struct notifier_block reboot_notifier;
/* I/O sub-system's stuff */
long long flash_size;
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index cd90ff3b76b1..14c10bed94ee 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -414,7 +414,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
* 0 contains more recent information.
*
* So the plan is to first check LEB 0. Then
- * a. if LEB 0 is OK, it must be containing the most resent data; then
+ * a. if LEB 0 is OK, it must be containing the most recent data; then
* we compare it with LEB 1, and if they are different, we copy LEB
* 0 to LEB 1;
* b. if LEB 0 is corrupted, but LEB 1 has to be OK, and we copy LEB 1
@@ -848,7 +848,7 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
goto out_free;
/*
- * Get sure that the scanning information is consistent to the
+ * Make sure that the scanning information is consistent to the
* information stored in the volume table.
*/
err = check_scanning_info(ubi, si);
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index f64ddabd4ac8..ee7b1d8fbb92 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -350,7 +350,7 @@ static void prot_queue_add(struct ubi_device *ubi, struct ubi_wl_entry *e)
* @max: highest possible erase counter
*
* This function looks for a wear leveling entry with erase counter closest to
- * @max and less then @max.
+ * @max and less than @max.
*/
static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max)
{