7 files changed, 42 insertions, 13 deletions
diff --git a/drivers/Makefile b/drivers/Makefile
index fceb71a741c3..e121b66ef082 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_UWB)		+= uwb/
+obj-$(CONFIG_USB_OTG_UTILS)	+= usb/otg/
 obj-$(CONFIG_USB)		+= usb/
 obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
 obj-$(CONFIG_PCI)		+= usb/
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 864ac561fdbb..59c3d23f5bdc 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -114,18 +114,6 @@ config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
-config ISP1301_OMAP
-	tristate "Philips ISP1301 with OMAP OTG"
-	depends on ARCH_OMAP_OTG
-	help
-	  If you say yes here you get support for the Philips ISP1301
-	  USB-On-The-Go transceiver working with the OMAP OTG controller.
-	  The ISP1301 is used in products including H2 and H3 development
-	  boards for Texas Instruments OMAP processors.
-	  
-	  This driver can also be built as a module.  If so, the module
-	  will be called isp1301_omap.
-
 config SENSORS_MAX6875
 	tristate "Maxim MAX6875 Power supply supervisor"
 	depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 8b95f41a5001..83accaaf8164 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
-obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 289d81adfb9c..83babb0a1df7 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -150,4 +150,6 @@ source "drivers/usb/atm/Kconfig"
 
 source "drivers/usb/gadget/Kconfig"
 
+source "drivers/usb/otg/Kconfig"
+
 endif # USB_SUPPORT
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
new file mode 100644
index 000000000000..860342902bbb
--- /dev/null
+++ b/drivers/usb/otg/Kconfig
@@ -0,0 +1,31 @@
+#
+# USB OTG infrastructure may be needed for peripheral-only, host-only,
+# or OTG-capable configurations when OTG transceivers or controllers
+# are used.
+#
+
+comment "OTG and related infrastructure"
+
+if USB || USB_GADGET
+
+config USB_OTG_UTILS
+	bool
+	help
+	  Select this to make sure the build includes objects from
+	  the OTG infrastructure directory.
+
+config ISP1301_OMAP
+	tristate "Philips ISP1301 with OMAP OTG"
+	depends on I2C && ARCH_OMAP_OTG
+	select USB_OTG_UTILS
+	help
+	  If you say yes here you get support for the Philips ISP1301
+	  USB-On-The-Go transceiver working with the OMAP OTG controller.
+	  The ISP1301 is a full speed USB  transceiver which is used in
+	  products including H2, H3, and H4 development boards for Texas
+	  Instruments OMAP processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called isp1301_omap.
+
+endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
new file mode 100644
index 000000000000..483816685d00
--- /dev/null
+++ b/drivers/usb/otg/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
+
+ifeq ($(CONFIG_USB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+else ifeq ($(CONFIG_USB_GADGET_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index e0d56ef2bcb0..e0d56ef2bcb0 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c