diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/media/dvb/ttpci/budget.c | 77 |
1 files changed, 70 insertions, 7 deletions
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 7adfe17b0616..2293d80c6e51 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -45,6 +45,7 @@ #include "tda826x.h" #include "lnbp21.h" #include "bsru6.h" +#include "bsbe1.h" static int diseqc_method; module_param(diseqc_method, int, 0444); @@ -368,6 +369,38 @@ static struct tda10086_config tda10086_config = { .xtal_freq = TDA10086_XTAL_16M, }; +static struct stv0299_config alps_bsru6_config_activy = { + .demod_address = 0x68, + .inittab = alps_bsru6_inittab, + .mclk = 88000000UL, + .invert = 1, + .op0_off = 1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, +}; + +static struct stv0299_config alps_bsbe1_config_activy = { + .demod_address = 0x68, + .inittab = alps_bsbe1_inittab, + .mclk = 88000000UL, + .invert = 1, + .op0_off = 1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsbe1_set_symbol_rate, +}; + + +static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) +{ + u8 val; + struct i2c_msg msg[] = { + { .addr = adr, .flags = 0, .buf = ®, .len = 1 }, + { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 } + }; + + return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val; +} + static u8 read_pwm(struct budget* budget) { u8 b = 0xff; @@ -383,6 +416,8 @@ static u8 read_pwm(struct budget* budget) static void frontend_init(struct budget *budget) { + (void)alps_bsbe1_config; /* avoid warning */ + switch(budget->dev->pci->subsystem_device) { case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) case 0x1013: @@ -428,15 +463,43 @@ static void frontend_init(struct budget *budget) } break; - case 0x4f60: // Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/ALPS BSRU6(tsa5059)) - budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; - budget->dvb_frontend->tuner_priv = &budget->i2c_adap; - budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; - budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */ + { + int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67); + + if (subtype < 0) + break; + /* fixme: find a better way to identify the card */ + if (subtype < 0x36) { + /* assume ALPS BSRU6 */ + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + break; + } + } else { + /* assume ALPS BSBE1 */ + /* reset tuner */ + saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI); + msleep(250); + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + break; + } } break; + } case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522)) budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap); |