1 files changed, 172 insertions, 10 deletions

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index c17c28594a29..72dce4546451 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -103,6 +103,8 @@
 #define NDCB0_ST_ROW_EN         (0x1 << 26)
 #define NDCB0_AUTO_RS		(0x1 << 25)
 #define NDCB0_CSEL		(0x1 << 24)
+#define NDCB0_EXT_CMD_TYPE_MASK	(0x7 << 29)
+#define NDCB0_EXT_CMD_TYPE(x)	(((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
 #define NDCB0_CMD_TYPE_MASK	(0x7 << 21)
 #define NDCB0_CMD_TYPE(x)	(((x) << 21) & NDCB0_CMD_TYPE_MASK)
 #define NDCB0_NC		(0x1 << 20)
@@ -113,6 +115,14 @@
 #define NDCB0_CMD1_MASK		(0xff)
 #define NDCB0_ADDR_CYC_SHIFT	(16)
 
+#define EXT_CMD_TYPE_DISPATCH	6 /* Command dispatch */
+#define EXT_CMD_TYPE_NAKED_RW	5 /* Naked read or Naked write */
+#define EXT_CMD_TYPE_READ	4 /* Read */
+#define EXT_CMD_TYPE_DISP_WR	4 /* Command dispatch with write */
+#define EXT_CMD_TYPE_FINAL	3 /* Final command */
+#define EXT_CMD_TYPE_LAST_RW	1 /* Last naked read/write */
+#define EXT_CMD_TYPE_MONO	0 /* Monolithic read/write */
+
 /* macros for registers read/write */
 #define nand_writel(info, off, val)	\
 	__raw_writel((val), (info)->mmio_base + (off))
@@ -206,8 +216,8 @@ struct pxa3xx_nand_info {
 	int			use_spare;	/* use spare ? */
 	int			need_wait;
 
-	unsigned int		fifo_size;	/* max. data size in the FIFO */
 	unsigned int		data_size;	/* data to be read from FIFO */
+	unsigned int		chunk_size;	/* split commands chunk size */
 	unsigned int		oob_size;
 	unsigned int		spare_size;
 	unsigned int		ecc_size;
@@ -271,6 +281,31 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 	.pattern = bbt_mirror_pattern
 };
 
+static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
+	.eccbytes = 64,
+	.eccpos = {
+		32,  33,  34,  35,  36,  37,  38,  39,
+		40,  41,  42,  43,  44,  45,  46,  47,
+		48,  49,  50,  51,  52,  53,  54,  55,
+		56,  57,  58,  59,  60,  61,  62,  63,
+		96,  97,  98,  99,  100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127},
+	/* Bootrom looks in bytes 0 & 5 for bad blocks */
+	.oobfree = { {6, 26}, { 64, 32} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
+	.eccbytes = 128,
+	.eccpos = {
+		32,  33,  34,  35,  36,  37,  38,  39,
+		40,  41,  42,  43,  44,  45,  46,  47,
+		48,  49,  50,  51,  52,  53,  54,  55,
+		56,  57,  58,  59,  60,  61,  62,  63},
+	.oobfree = { }
+};
+
 /* Define a default flash type setting serve as flash detecting only */
 #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
 
@@ -429,7 +464,7 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
 
 static void handle_data_pio(struct pxa3xx_nand_info *info)
 {
-	unsigned int do_bytes = min(info->data_size, info->fifo_size);
+	unsigned int do_bytes = min(info->data_size, info->chunk_size);
 
 	switch (info->state) {
 	case STATE_PIO_WRITING:
@@ -666,7 +701,7 @@ static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
 }
 
 static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
-		uint16_t column, int page_addr)
+		int ext_cmd_type, uint16_t column, int page_addr)
 {
 	int addr_cycle, exec_cmd;
 	struct pxa3xx_nand_host *host;
@@ -699,9 +734,20 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
 		if (command == NAND_CMD_READOOB)
 			info->buf_start += mtd->writesize;
 
-		/* Second command setting for large pages */
-		if (mtd->writesize >= PAGE_CHUNK_SIZE)
+		/*
+		 * Multiple page read needs an 'extended command type' field,
+		 * which is either naked-read or last-read according to the
+		 * state.
+		 */
+		if (mtd->writesize == PAGE_CHUNK_SIZE) {
 			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
+		} else if (mtd->writesize > PAGE_CHUNK_SIZE) {
+			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
+					| NDCB0_LEN_OVRD
+					| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+			info->ndcb3 = info->chunk_size +
+				      info->oob_size;
+		}
 
 		set_command_address(info, mtd->writesize, column, page_addr);
 		break;
@@ -817,7 +863,8 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 	prepare_start_command(info, command);
 
 	info->state = STATE_PREPARED;
-	exec_cmd = prepare_set_command(info, command, column, page_addr);
+	exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
+
 	if (exec_cmd) {
 		init_completion(&info->cmd_complete);
 		init_completion(&info->dev_ready);
@@ -835,6 +882,93 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 	info->state = STATE_IDLE;
 }
 
+static void armada370_nand_cmdfunc(struct mtd_info *mtd,
+				   const unsigned command,
+				   int column, int page_addr)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	int ret, exec_cmd, ext_cmd_type;
+
+	/*
+	 * if this is a x16 device then convert the input
+	 * "byte" address into a "word" address appropriate
+	 * for indexing a word-oriented device
+	 */
+	if (info->reg_ndcr & NDCR_DWIDTH_M)
+		column /= 2;
+
+	/*
+	 * There may be different NAND chip hooked to
+	 * different chip select, so check whether
+	 * chip select has been changed, if yes, reset the timing
+	 */
+	if (info->cs != host->cs) {
+		info->cs = host->cs;
+		nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+		nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+	}
+
+	/* Select the extended command for the first command */
+	switch (command) {
+	case NAND_CMD_READ0:
+	case NAND_CMD_READOOB:
+		ext_cmd_type = EXT_CMD_TYPE_MONO;
+		break;
+	default:
+		ext_cmd_type = 0;
+	}
+
+	prepare_start_command(info, command);
+
+	/*
+	 * Prepare the "is ready" completion before starting a command
+	 * transaction sequence. If the command is not executed the
+	 * completion will be completed, see below.
+	 *
+	 * We can do that inside the loop because the command variable
+	 * is invariant and thus so is the exec_cmd.
+	 */
+	info->need_wait = 1;
+	init_completion(&info->dev_ready);
+	do {
+		info->state = STATE_PREPARED;
+		exec_cmd = prepare_set_command(info, command, ext_cmd_type,
+					       column, page_addr);
+		if (!exec_cmd) {
+			info->need_wait = 0;
+			complete(&info->dev_ready);
+			break;
+		}
+
+		init_completion(&info->cmd_complete);
+		pxa3xx_nand_start(info);
+
+		ret = wait_for_completion_timeout(&info->cmd_complete,
+				CHIP_DELAY_TIMEOUT);
+		if (!ret) {
+			dev_err(&info->pdev->dev, "Wait time out!!!\n");
+			/* Stop State Machine for next command cycle */
+			pxa3xx_nand_stop(info);
+			break;
+		}
+
+		/* Check if the sequence is complete */
+		if (info->data_size == 0)
+			break;
+
+		if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
+			/* Last read: issue a 'last naked read' */
+			if (info->data_size == info->chunk_size)
+				ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
+			else
+				ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+		}
+	} while (1);
+
+	info->state = STATE_IDLE;
+}
+
 static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
 		struct nand_chip *chip, const uint8_t *buf, int oob_required)
 {
@@ -1015,13 +1149,14 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
 
 	if (ndcr & NDCR_PAGE_SZ) {
 		/* Controller's FIFO size */
-		info->fifo_size = 2048;
+		info->chunk_size = 2048;
 		host->read_id_bytes = 4;
 	} else {
-		info->fifo_size = 512;
+		info->chunk_size = 512;
 		host->read_id_bytes = 2;
 	}
 
+	/* Set an initial chunk size */
 	info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
 	info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
 	info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
@@ -1125,6 +1260,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
 	 * is used with non-ONFI compliant devices.
 	 */
 	if (page_size == 2048) {
+		info->chunk_size = 2048;
 		info->spare_size = 40;
 		info->ecc_size = 24;
 		ecc->mode = NAND_ECC_HW;
@@ -1133,6 +1269,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
 		return 1;
 
 	} else if (page_size == 512) {
+		info->chunk_size = 512;
 		info->spare_size = 8;
 		info->ecc_size = 8;
 		ecc->mode = NAND_ECC_HW;
@@ -1147,7 +1284,28 @@ static int armada370_ecc_init(struct pxa3xx_nand_info *info,
 			      struct nand_ecc_ctrl *ecc,
 			      int strength, int page_size)
 {
-	/* Unimplemented yet */
+	if (strength == 4 && page_size == 4096) {
+		info->ecc_bch = 1;
+		info->chunk_size = 2048;
+		info->spare_size = 32;
+		info->ecc_size = 32;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = info->chunk_size;
+		ecc->layout = &ecc_layout_4KB_bch4bit;
+		ecc->strength = 16;
+		return 1;
+
+	} else if (strength == 8 && page_size == 4096) {
+		info->ecc_bch = 1;
+		info->chunk_size = 1024;
+		info->spare_size = 0;
+		info->ecc_size = 32;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = info->chunk_size;
+		ecc->layout = &ecc_layout_4KB_bch8bit;
+		ecc->strength = 16;
+		return 1;
+	}
 	return 0;
 }
 
@@ -1315,12 +1473,16 @@ static int alloc_nand_resource(struct platform_device *pdev)
 		chip->controller        = &info->controller;
 		chip->waitfunc		= pxa3xx_nand_waitfunc;
 		chip->select_chip	= pxa3xx_nand_select_chip;
-		chip->cmdfunc		= pxa3xx_nand_cmdfunc;
 		chip->read_word		= pxa3xx_nand_read_word;
 		chip->read_byte		= pxa3xx_nand_read_byte;
 		chip->read_buf		= pxa3xx_nand_read_buf;
 		chip->write_buf		= pxa3xx_nand_write_buf;
 		chip->options		|= NAND_NO_SUBPAGE_WRITE;
+
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+			chip->cmdfunc = armada370_nand_cmdfunc;
+		else
+			chip->cmdfunc = pxa3xx_nand_cmdfunc;
 	}
 
 	spin_lock_init(&chip->controller->lock);