diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/iio/humidity/dht11.c | 8 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 2 | ||||
| -rw-r--r-- | drivers/staging/iio/adc/Kconfig | 1 |
5 files changed, 9 insertions, 6 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 97b20aa0b36c..283ded7747a9 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -175,6 +175,7 @@ config DA9150_GPADC config EXYNOS_ADC tristate "Exynos ADC driver support" depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST) + depends on HAS_IOMEM help Core support for the ADC block found in the Samsung EXYNOS series of SoCs for drivers such as the touchscreen and hwmon to use to share @@ -207,6 +208,7 @@ config INA2XX_ADC config IMX7D_ADC tristate "IMX7D ADC driver" depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM help Say yes here to build support for IMX7D ADC. diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index 1165b1c4f9d6..cfc5a051ab9f 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -117,7 +117,7 @@ static int dht11_decode(struct dht11 *dht11, int offset, int timeres) if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum) return -EIO; - dht11->timestamp = ktime_get_real_ns(); + dht11->timestamp = ktime_get_boot_ns(); if (hum_int < 20) { /* DHT22 */ dht11->temperature = (((temp_int & 0x7f) << 8) + temp_dec) * ((temp_int & 0x80) ? -100 : 100); @@ -145,7 +145,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data) /* TODO: Consider making the handler safe for IRQ sharing */ if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) { - dht11->edges[dht11->num_edges].ts = ktime_get_real_ns(); + dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns(); dht11->edges[dht11->num_edges++].value = gpio_get_value(dht11->gpio); @@ -164,7 +164,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev, int ret, timeres; mutex_lock(&dht11->lock); - if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_real_ns()) { + if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_boot_ns()) { timeres = ktime_get_resolution_ns(); if (DHT11_DATA_BIT_HIGH < 2 * timeres) { dev_err(dht11->dev, "timeresolution %dns too low\n", @@ -279,7 +279,7 @@ static int dht11_probe(struct platform_device *pdev) return -EINVAL; } - dht11->timestamp = ktime_get_real_ns() - DHT11_DATA_VALID_TIME - 1; + dht11->timestamp = ktime_get_boot_ns() - DHT11_DATA_VALID_TIME - 1; dht11->num_edges = -1; platform_set_drvdata(pdev, iio); diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 48fbc0bc7e2a..8f8d1370ed8b 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -5,9 +5,9 @@ config INV_MPU6050_IIO tristate "Invensense MPU6050 devices" depends on I2C && SYSFS + depends on I2C_MUX select IIO_BUFFER select IIO_TRIGGERED_BUFFER - select I2C_MUX help This driver supports the Invensense MPU6050 devices. This driver can also support MPU6500 in MPU6050 compatibility mode diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c index 93e29fb67fa0..db35e04a0637 100644 --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c @@ -87,7 +87,7 @@ static int lidar_i2c_xfer(struct lidar_data *data, u8 reg, u8 *val, int len) ret = i2c_transfer(client->adapter, msg, 2); - return (ret == 2) ? 0 : ret; + return (ret == 2) ? 0 : -EIO; } static int lidar_smbus_xfer(struct lidar_data *data, u8 reg, u8 *val, int len) diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 58d4517e1836..b9519be90fda 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -6,6 +6,7 @@ menu "Analog to digital converters" config AD7606 tristate "Analog Devices AD7606 ADC driver" depends on GPIOLIB || COMPILE_TEST + depends on HAS_IOMEM select IIO_BUFFER select IIO_TRIGGERED_BUFFER help |