diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/phy/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 2 | ||||
| -rw-r--r-- | drivers/phy/phy-bcm-cygnus-pcie.c | 213 | ||||
| -rw-r--r-- | drivers/phy/phy-mt65xx-usb3.c | 506 | ||||
| -rw-r--r-- | drivers/phy/phy-samsung-usb2.c | 25 | ||||
| -rw-r--r-- | drivers/phy/phy-samsung-usb2.h | 2 | ||||
| -rw-r--r-- | drivers/phy/phy-sun4i-usb.c | 22 |
7 files changed, 773 insertions, 15 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 47da573d0bab..7eb5859dd035 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -206,6 +206,15 @@ config PHY_HIX5HD2_SATA help Support for SATA PHY on Hisilicon hix5hd2 Soc. +config PHY_MT65XX_USB3 + tristate "Mediatek USB3.0 PHY Driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help + Say 'Y' here to add support for Mediatek USB3.0 PHY driver + for mt65xx SoCs. it supports two usb2.0 ports and + one usb3.0 port. + config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF @@ -371,4 +380,13 @@ config PHY_BRCMSTB_SATA Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. Likely useful only with CONFIG_SATA_BRCMSTB enabled. +config PHY_CYGNUS_PCIE + tristate "Broadcom Cygnus PCIe PHY driver" + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_CYGNUS + help + Enable this to support the Broadcom Cygnus PCIe PHY. + If unsure, say N. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index a5b18c18fc12..075db1a81aa5 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o +obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o @@ -46,3 +47,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/phy-bcm-cygnus-pcie.c new file mode 100644 index 000000000000..7ad72b7d2b98 --- /dev/null +++ b/drivers/phy/phy-bcm-cygnus-pcie.c @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define PCIE_CFG_OFFSET 0x00 +#define PCIE1_PHY_IDDQ_SHIFT 10 +#define PCIE0_PHY_IDDQ_SHIFT 2 + +enum cygnus_pcie_phy_id { + CYGNUS_PHY_PCIE0 = 0, + CYGNUS_PHY_PCIE1, + MAX_NUM_PHYS, +}; + +struct cygnus_pcie_phy_core; + +/** + * struct cygnus_pcie_phy - Cygnus PCIe PHY device + * @core: pointer to the Cygnus PCIe PHY core control + * @id: internal ID to identify the Cygnus PCIe PHY + * @phy: pointer to the kernel PHY device + */ +struct cygnus_pcie_phy { + struct cygnus_pcie_phy_core *core; + enum cygnus_pcie_phy_id id; + struct phy *phy; +}; + +/** + * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control + * @dev: pointer to device + * @base: base register + * @lock: mutex to protect access to individual PHYs + * @phys: pointer to Cygnus PHY device + */ +struct cygnus_pcie_phy_core { + struct device *dev; + void __iomem *base; + struct mutex lock; + struct cygnus_pcie_phy phys[MAX_NUM_PHYS]; +}; + +static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool enable) +{ + struct cygnus_pcie_phy_core *core = phy->core; + unsigned shift; + u32 val; + + mutex_lock(&core->lock); + + switch (phy->id) { + case CYGNUS_PHY_PCIE0: + shift = PCIE0_PHY_IDDQ_SHIFT; + break; + + case CYGNUS_PHY_PCIE1: + shift = PCIE1_PHY_IDDQ_SHIFT; + break; + + default: + mutex_unlock(&core->lock); + dev_err(core->dev, "PCIe PHY %d invalid\n", phy->id); + return -EINVAL; + } + + if (enable) { + val = readl(core->base + PCIE_CFG_OFFSET); + val &= ~BIT(shift); + writel(val, core->base + PCIE_CFG_OFFSET); + /* + * Wait 50 ms for the PCIe Serdes to stabilize after the analog + * front end is brought up + */ + msleep(50); + } else { + val = readl(core->base + PCIE_CFG_OFFSET); + val |= BIT(shift); + writel(val, core->base + PCIE_CFG_OFFSET); + } + + mutex_unlock(&core->lock); + dev_dbg(core->dev, "PCIe PHY %d %s\n", phy->id, + enable ? "enabled" : "disabled"); + return 0; +} + +static int cygnus_pcie_phy_power_on(struct phy *p) +{ + struct cygnus_pcie_phy *phy = phy_get_drvdata(p); + + return cygnus_pcie_power_config(phy, true); +} + +static int cygnus_pcie_phy_power_off(struct phy *p) +{ + struct cygnus_pcie_phy *phy = phy_get_drvdata(p); + + return cygnus_pcie_power_config(phy, false); +} + +static struct phy_ops cygnus_pcie_phy_ops = { + .power_on = cygnus_pcie_phy_power_on, + .power_off = cygnus_pcie_phy_power_off, + .owner = THIS_MODULE, +}; + +static int cygnus_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node, *child; + struct cygnus_pcie_phy_core *core; + struct phy_provider *provider; + struct resource *res; + unsigned cnt = 0; + + if (of_get_child_count(node) == 0) { + dev_err(dev, "PHY no child node\n"); + return -ENODEV; + } + + core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; + + core->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + core->base = devm_ioremap_resource(dev, res); + if (IS_ERR(core->base)) + return PTR_ERR(core->base); + + mutex_init(&core->lock); + + for_each_available_child_of_node(node, child) { + unsigned int id; + struct cygnus_pcie_phy *p; + + if (of_property_read_u32(child, "reg", &id)) { + dev_err(dev, "missing reg property for %s\n", + child->name); + return -EINVAL; + } + + if (id >= MAX_NUM_PHYS) { + dev_err(dev, "invalid PHY id: %u\n", id); + return -EINVAL; + } + + if (core->phys[id].phy) { + dev_err(dev, "duplicated PHY id: %u\n", id); + return -EINVAL; + } + + p = &core->phys[id]; + p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops); + if (IS_ERR(p->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(p->phy); + } + + p->core = core; + p->id = id; + phy_set_drvdata(p->phy, p); + cnt++; + } + + dev_set_drvdata(dev, core); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "failed to register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt); + + return 0; +} + +static const struct of_device_id cygnus_pcie_phy_match_table[] = { + { .compatible = "brcm,cygnus-pcie-phy" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, cygnus_pcie_phy_match_table); + +static struct platform_driver cygnus_pcie_phy_driver = { + .driver = { + .name = "cygnus-pcie-phy", + .of_match_table = cygnus_pcie_phy_match_table, + }, + .probe = cygnus_pcie_phy_probe, +}; +module_platform_driver(cygnus_pcie_phy_driver); + +MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom Cygnus PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c new file mode 100644 index 000000000000..f30b28bd41fe --- /dev/null +++ b/drivers/phy/phy-mt65xx-usb3.c @@ -0,0 +1,506 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +/* + * for sifslv2 register, but exclude port's; + * relative to USB3_SIF2_BASE base address + */ +#define SSUSB_SIFSLV_SPLLC 0x0000 + +/* offsets of sub-segment in each port registers */ +#define SSUSB_SIFSLV_U2PHY_COM_BASE 0x0000 +#define SSUSB_SIFSLV_U3PHYD_BASE 0x0100 +#define SSUSB_USB30_PHYA_SIV_B_BASE 0x0300 +#define SSUSB_SIFSLV_U3PHYA_DA_BASE 0x0400 + +#define U3P_USBPHYACR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000) +#define PA0_RG_U2PLL_FORCE_ON BIT(15) + +#define U3P_USBPHYACR2 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008) +#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18) + +#define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014) +#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) +#define PA5_RG_U2_HS_100U_U3_EN BIT(11) + +#define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018) +#define PA6_RG_U2_ISO_EN BIT(31) +#define PA6_RG_U2_BC11_SW_EN BIT(23) +#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) + +#define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020) +#define P2C_RG_USB20_GPIO_CTL BIT(9) +#define P2C_USB20_GPIO_MODE BIT(8) +#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE) + +#define U3D_U2PHYDCR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060) +#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24) + +#define U3P_U2PHYDTM0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068) +#define P2C_FORCE_UART_EN BIT(26) +#define P2C_FORCE_DATAIN BIT(23) +#define P2C_FORCE_DM_PULLDOWN BIT(21) +#define P2C_FORCE_DP_PULLDOWN BIT(20) +#define P2C_FORCE_XCVRSEL BIT(19) +#define P2C_FORCE_SUSPENDM BIT(18) +#define P2C_FORCE_TERMSEL BIT(17) +#define P2C_RG_DATAIN GENMASK(13, 10) +#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10) +#define P2C_RG_DMPULLDOWN BIT(7) +#define P2C_RG_DPPULLDOWN BIT(6) +#define P2C_RG_XCVRSEL GENMASK(5, 4) +#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4) +#define P2C_RG_SUSPENDM BIT(3) +#define P2C_RG_TERMSEL BIT(2) +#define P2C_DTM0_PART_MASK \ + (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \ + P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \ + P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \ + P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL) + +#define U3P_U2PHYDTM1 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C) +#define P2C_RG_UART_EN BIT(16) +#define P2C_RG_VBUSVALID BIT(5) +#define P2C_RG_SESSEND BIT(4) +#define P2C_RG_AVALID BIT(2) + +#define U3P_U3_PHYA_REG0 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000) +#define P3A_RG_U3_VUSB10_ON BIT(5) + +#define U3P_U3_PHYA_REG6 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018) +#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28) +#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28) + +#define U3P_U3_PHYA_REG9 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024) +#define P3A_RG_RX_DAC_MUX GENMASK(5, 1) +#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1) + +#define U3P_U3PHYA_DA_REG0 (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0000) +#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10) +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10) + +#define U3P_PHYD_CDR1 (SSUSB_SIFSLV_U3PHYD_BASE + 0x005c) +#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) +#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24) +#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) +#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8) + +#define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x0018) +#define XC3_RG_U3_XTAL_RX_PWD BIT(9) +#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) + +struct mt65xx_phy_instance { + struct phy *phy; + void __iomem *port_base; + u32 index; + u8 type; +}; + +struct mt65xx_u3phy { + struct device *dev; + void __iomem *sif_base; /* include sif2, but exclude port's */ + struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */ + struct mt65xx_phy_instance **phys; + int nphys; +}; + +static void phy_instance_init(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *port_base = instance->port_base; + u32 index = instance->index; + u32 tmp; + + /* switch to USB function. (system register, force ip into usb mode) */ + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~P2C_FORCE_UART_EN; + tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0); + writel(tmp, port_base + U3P_U2PHYDTM0); + + tmp = readl(port_base + U3P_U2PHYDTM1); + tmp &= ~P2C_RG_UART_EN; + writel(tmp, port_base + U3P_U2PHYDTM1); + + if (!index) { + tmp = readl(port_base + U3P_U2PHYACR4); + tmp &= ~P2C_U2_GPIO_CTR_MSK; + writel(tmp, port_base + U3P_U2PHYACR4); + + tmp = readl(port_base + U3P_USBPHYACR2); + tmp |= PA2_RG_SIF_U2PLL_FORCE_EN; + writel(tmp, port_base + U3P_USBPHYACR2); + + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + } else { + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp |= P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + } + + /* DP/DM BC1.1 path Disable */ + tmp = readl(port_base + U3P_USBPHYACR6); + tmp &= ~PA6_RG_U2_BC11_SW_EN; + writel(tmp, port_base + U3P_USBPHYACR6); + + tmp = readl(port_base + U3P_U3PHYA_DA_REG0); + tmp &= ~P3A_RG_XTAL_EXT_EN_U3; + tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2); + writel(tmp, port_base + U3P_U3PHYA_DA_REG0); + + tmp = readl(port_base + U3P_U3_PHYA_REG9); + tmp &= ~P3A_RG_RX_DAC_MUX; + tmp |= P3A_RG_RX_DAC_MUX_VAL(4); + writel(tmp, port_base + U3P_U3_PHYA_REG9); + + tmp = readl(port_base + U3P_U3_PHYA_REG6); + tmp &= ~P3A_RG_TX_EIDLE_CM; + tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe); + writel(tmp, port_base + U3P_U3_PHYA_REG6); + + tmp = readl(port_base + U3P_PHYD_CDR1); + tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1); + tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3); + writel(tmp, port_base + U3P_PHYD_CDR1); + + dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); +} + +static void phy_instance_power_on(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *port_base = instance->port_base; + u32 index = instance->index; + u32 tmp; + + if (!index) { + /* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */ + tmp = readl(port_base + U3P_U3_PHYA_REG0); + tmp |= P3A_RG_U3_VUSB10_ON; + writel(tmp, port_base + U3P_U3_PHYA_REG0); + } + + /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */ + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL); + tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK); + writel(tmp, port_base + U3P_U2PHYDTM0); + + /* OTG Enable */ + tmp = readl(port_base + U3P_USBPHYACR6); + tmp |= PA6_RG_U2_OTG_VBUSCMP_EN; + writel(tmp, port_base + U3P_USBPHYACR6); + + if (!index) { + tmp = readl(u3phy->sif_base + U3P_XTALCTL3); + tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD; + writel(tmp, u3phy->sif_base + U3P_XTALCTL3); + + /* [mt8173]disable Change 100uA current from SSUSB */ + tmp = readl(port_base + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HS_100U_U3_EN; + writel(tmp, port_base + U3P_USBPHYACR5); + } + + tmp = readl(port_base + U3P_U2PHYDTM1); + tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID; + tmp &= ~P2C_RG_SESSEND; + writel(tmp, port_base + U3P_U2PHYDTM1); + + /* USB 2.0 slew rate calibration */ + tmp = readl(port_base + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HSTX_SRCTRL; + tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4); + writel(tmp, port_base + U3P_USBPHYACR5); + + if (index) { + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp |= P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + } + dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); +} + +static void phy_instance_power_off(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *port_base = instance->port_base; + u32 index = instance->index; + u32 tmp; + + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN); + tmp |= P2C_FORCE_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + + /* OTG Disable */ + tmp = readl(port_base + U3P_USBPHYACR6); + tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN; + writel(tmp, port_base + U3P_USBPHYACR6); + + if (!index) { + /* (also disable)Change 100uA current switch to USB2.0 */ + tmp = readl(port_base + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HS_100U_U3_EN; + writel(tmp, port_base + U3P_USBPHYACR5); + } + + /* let suspendm=0, set utmi into analog power down */ + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~P2C_RG_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + udelay(1); + + tmp = readl(port_base + U3P_U2PHYDTM1); + tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID); + tmp |= P2C_RG_SESSEND; + writel(tmp, port_base + U3P_U2PHYDTM1); + + if (!index) { + tmp = readl(port_base + U3P_U3_PHYA_REG0); + tmp &= ~P3A_RG_U3_VUSB10_ON; + writel(tmp, port_base + U3P_U3_PHYA_REG0); + } else { + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + } + + dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); +} + +static void phy_instance_exit(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *port_base = instance->port_base; + u32 index = instance->index; + u32 tmp; + + if (index) { + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~P2C_FORCE_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + } +} + +static int mt65xx_phy_init(struct phy *phy) +{ + struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); + struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + int ret; + + ret = clk_prepare_enable(u3phy->u3phya_ref); + if (ret) { + dev_err(u3phy->dev, "failed to enable u3phya_ref\n"); + return ret; + } + + phy_instance_init(u3phy, instance); + return 0; +} + +static int mt65xx_phy_power_on(struct phy *phy) +{ + struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); + struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + + phy_instance_power_on(u3phy, instance); + return 0; +} + +static int mt65xx_phy_power_off(struct phy *phy) +{ + struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); + struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + + phy_instance_power_off(u3phy, instance); + return 0; +} + +static int mt65xx_phy_exit(struct phy *phy) +{ + struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); + struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + + phy_instance_exit(u3phy, instance); + clk_disable_unprepare(u3phy->u3phya_ref); + return 0; +} + +static struct phy *mt65xx_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev); + struct mt65xx_phy_instance *instance = NULL; + struct device_node *phy_np = args->np; + int index; + + + if (args->args_count != 1) { + dev_err(dev, "invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < u3phy->nphys; index++) + if (phy_np == u3phy->phys[index]->phy->dev.of_node) { + instance = u3phy->phys[index]; + break; + } + + if (!instance) { + dev_err(dev, "failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + instance->type = args->args[0]; + + if (!(instance->type == PHY_TYPE_USB2 || + instance->type == PHY_TYPE_USB3)) { + dev_err(dev, "unsupported device type: %d\n", instance->type); + return ERR_PTR(-EINVAL); + } + + return instance->phy; +} + +static struct phy_ops mt65xx_u3phy_ops = { + .init = mt65xx_phy_init, + .exit = mt65xx_phy_exit, + .power_on = mt65xx_phy_power_on, + .power_off = mt65xx_phy_power_off, + .owner = THIS_MODULE, +}; + +static int mt65xx_u3phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct resource *sif_res; + struct mt65xx_u3phy *u3phy; + struct resource res; + int port; + + u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL); + if (!u3phy) + return -ENOMEM; + + u3phy->nphys = of_get_child_count(np); + u3phy->phys = devm_kcalloc(dev, u3phy->nphys, + sizeof(*u3phy->phys), GFP_KERNEL); + if (!u3phy->phys) + return -ENOMEM; + + u3phy->dev = dev; + platform_set_drvdata(pdev, u3phy); + + sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + u3phy->sif_base = devm_ioremap_resource(dev, sif_res); + if (IS_ERR(u3phy->sif_base)) { + dev_err(dev, "failed to remap sif regs\n"); + return PTR_ERR(u3phy->sif_base); + } + + u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref"); + if (IS_ERR(u3phy->u3phya_ref)) { + dev_err(dev, "error to get u3phya_ref\n"); + return PTR_ERR(u3phy->u3phya_ref); + } + + port = 0; + for_each_child_of_node(np, child_np) { + struct mt65xx_phy_instance *instance; + struct phy *phy; + int retval; + + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); + if (!instance) + return -ENOMEM; + + u3phy->phys[port] = instance; + + phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + + retval = of_address_to_resource(child_np, 0, &res); + if (retval) { + dev_err(dev, "failed to get address resource(id-%d)\n", + port); + return retval; + } + + instance->port_base = devm_ioremap_resource(&phy->dev, &res); + if (IS_ERR(instance->port_base)) { + dev_err(dev, "failed to remap phy regs\n"); + return PTR_ERR(instance->port_base); + } + + instance->phy = phy; + instance->index = port; + phy_set_drvdata(phy, instance); + port++; + } + + provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id mt65xx_u3phy_id_table[] = { + { .compatible = "mediatek,mt8173-u3phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table); + +static struct platform_driver mt65xx_u3phy_driver = { + .probe = mt65xx_u3phy_probe, + .driver = { + .name = "mt65xx-u3phy", + .of_match_table = mt65xx_u3phy_id_table, + }, +}; + +module_platform_driver(mt65xx_u3phy_driver); + +MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); +MODULE_DESCRIPTION("mt65xx USB PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c index f278a9c547e1..1d22d93b552d 100644 --- a/drivers/phy/phy-samsung-usb2.c +++ b/drivers/phy/phy-samsung-usb2.c @@ -27,6 +27,13 @@ static int samsung_usb2_phy_power_on(struct phy *phy) dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", inst->cfg->label); + + if (drv->vbus) { + ret = regulator_enable(drv->vbus); + if (ret) + goto err_regulator; + } + ret = clk_prepare_enable(drv->clk); if (ret) goto err_main_clk; @@ -48,6 +55,9 @@ err_power_on: err_instance_clk: clk_disable_unprepare(drv->clk); err_main_clk: + if (drv->vbus) + regulator_disable(drv->vbus); +err_regulator: return ret; } @@ -55,7 +65,7 @@ static int samsung_usb2_phy_power_off(struct phy *phy) { struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); struct samsung_usb2_phy_driver *drv = inst->drv; - int ret; + int ret = 0; dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", inst->cfg->label); @@ -68,7 +78,10 @@ static int samsung_usb2_phy_power_off(struct phy *phy) } clk_disable_unprepare(drv->ref_clk); clk_disable_unprepare(drv->clk); - return 0; + if (drv->vbus) + ret = regulator_disable(drv->vbus); + + return ret; } static const struct phy_ops samsung_usb2_phy_ops = { @@ -203,6 +216,14 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev) return ret; } + drv->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(drv->vbus)) { + ret = PTR_ERR(drv->vbus); + if (ret == -EPROBE_DEFER) + return ret; + drv->vbus = NULL; + } + for (i = 0; i < drv->cfg->num_phys; i++) { char *label = drv->cfg->phys[i].label; struct samsung_usb2_phy_instance *p = &drv->instances[i]; diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/phy-samsung-usb2.h index 44bead9b8f34..6563e7ca0ac4 100644 --- a/drivers/phy/phy-samsung-usb2.h +++ b/drivers/phy/phy-samsung-usb2.h @@ -17,6 +17,7 @@ #include <linux/device.h> #include <linux/regmap.h> #include <linux/spinlock.h> +#include <linux/regulator/consumer.h> #define KHZ 1000 #define MHZ (KHZ * KHZ) @@ -37,6 +38,7 @@ struct samsung_usb2_phy_driver { const struct samsung_usb2_phy_config *cfg; struct clk *clk; struct clk *ref_clk; + struct regulator *vbus; unsigned long ref_rate; u32 ref_reg_val; struct device *dev; diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 731b395d6e6a..b12964b70625 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -551,19 +551,15 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) if (IS_ERR(data->base)) return PTR_ERR(data->base); - data->id_det_gpio = devm_gpiod_get(dev, "usb0_id_det", GPIOD_IN); - if (IS_ERR(data->id_det_gpio)) { - if (PTR_ERR(data->id_det_gpio) == -EPROBE_DEFER) - return -EPROBE_DEFER; - data->id_det_gpio = NULL; - } - - data->vbus_det_gpio = devm_gpiod_get(dev, "usb0_vbus_det", GPIOD_IN); - if (IS_ERR(data->vbus_det_gpio)) { - if (PTR_ERR(data->vbus_det_gpio) == -EPROBE_DEFER) - return -EPROBE_DEFER; - data->vbus_det_gpio = NULL; - } + data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det", + GPIOD_IN); + if (IS_ERR(data->id_det_gpio)) + return PTR_ERR(data->id_det_gpio); + + data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det", + GPIOD_IN); + if (IS_ERR(data->vbus_det_gpio)) + return PTR_ERR(data->vbus_det_gpio); if (of_find_property(np, "usb0_vbus_power-supply", NULL)) { data->vbus_power_supply = devm_power_supply_get_by_phandle(dev, |