summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/power/reset/Kconfig16
-rw-r--r--drivers/power/reset/Makefile2
-rw-r--r--drivers/power/reset/at91-poweroff.c14
-rw-r--r--drivers/power/reset/at91-reset.c4
-rw-r--r--drivers/power/reset/gemini-poweroff.c30
-rw-r--r--drivers/power/reset/gpio-poweroff.c8
-rw-r--r--drivers/power/reset/ocelot-reset.c88
-rw-r--r--drivers/power/reset/sc27xx-poweroff.c66
-rw-r--r--drivers/power/supply/axp20x_battery.c136
-rw-r--r--drivers/power/supply/axp288_fuel_gauge.c53
-rw-r--r--drivers/power/supply/bq2415x_charger.c5
-rw-r--r--drivers/power/supply/bq27xxx_battery.c2
-rw-r--r--drivers/power/supply/da9150-fg.c4
-rw-r--r--drivers/power/supply/gpio-charger.c179
-rw-r--r--drivers/power/supply/ltc2941-battery-gauge.c67
-rw-r--r--drivers/power/supply/max17042_battery.c1
16 files changed, 478 insertions, 197 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index a102e74ab24e..df58fc878b3e 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -104,6 +104,13 @@ config POWER_RESET_MSM
help
Power off and restart support for Qualcomm boards.
+config POWER_RESET_OCELOT_RESET
+ bool "Microsemi Ocelot reset driver"
+ depends on MSCC_OCELOT || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ This driver supports restart for Microsemi Ocelot SoC.
+
config POWER_RESET_PIIX4_POWEROFF
tristate "Intel PIIX4 power-off driver"
depends on PCI
@@ -218,5 +225,14 @@ config SYSCON_REBOOT_MODE
register, then the bootloader can read it to take different
action according to the mode.
+config POWER_RESET_SC27XX
+ bool "Spreadtrum SC27xx PMIC power-off driver"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ help
+ This driver supports powering off a system through
+ Spreadtrum SC27xx series PMICs. The SC27xx series
+ PMICs includes the SC2720, SC2721, SC2723, SC2730
+ and SC2731 chips.
+
endif
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index dcc92f5f7a37..7778c7485cf1 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
@@ -26,3 +27,4 @@ obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
+obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c
index c30c40193aaa..fb2fc8f741a1 100644
--- a/drivers/power/reset/at91-poweroff.c
+++ b/drivers/power/reset/at91-poweroff.c
@@ -55,10 +55,10 @@ static void __iomem *at91_shdwc_base;
static struct clk *sclk;
static void __iomem *mpddrc_base;
-static void __init at91_wakeup_status(void)
+static void __init at91_wakeup_status(struct platform_device *pdev)
{
+ const char *reason;
u32 reg = readl(at91_shdwc_base + AT91_SHDW_SR);
- char *reason = "unknown";
/* Simple power-on, just bail out */
if (!reg)
@@ -68,8 +68,10 @@ static void __init at91_wakeup_status(void)
reason = "RTT";
else if (reg & AT91_SHDW_RTCWK)
reason = "RTC";
+ else
+ reason = "unknown";
- pr_info("AT91: Wake-Up source: %s\n", reason);
+ dev_info(&pdev->dev, "Wake-Up source: %s\n", reason);
}
static void at91_poweroff(void)
@@ -157,10 +159,8 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(at91_shdwc_base)) {
- dev_err(&pdev->dev, "Could not map reset controller address\n");
+ if (IS_ERR(at91_shdwc_base))
return PTR_ERR(at91_shdwc_base);
- }
sclk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(sclk))
@@ -172,7 +172,7 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
return ret;
}
- at91_wakeup_status();
+ at91_wakeup_status(pdev);
if (pdev->dev.of_node)
at91_poweroff_dt_set_wakeup_mode(pdev);
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index b99769f8ab15..f44a9ffcc2ab 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -145,8 +145,8 @@ static int samx7_restart(struct notifier_block *this, unsigned long mode,
static void __init at91_reset_status(struct platform_device *pdev)
{
+ const char *reason;
u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
- char *reason;
switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
case RESET_TYPE_GENERAL:
@@ -169,7 +169,7 @@ static void __init at91_reset_status(struct platform_device *pdev)
break;
}
- pr_info("AT91: Starting after %s\n", reason);
+ dev_info(&pdev->dev, "Starting after %s\n", reason);
}
static const struct of_device_id at91_ramc_of_match[] = {
diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c
index ff75af5abbc5..2ac291af1265 100644
--- a/drivers/power/reset/gemini-poweroff.c
+++ b/drivers/power/reset/gemini-poweroff.c
@@ -47,8 +47,12 @@ static irqreturn_t gemini_powerbutton_interrupt(int irq, void *data)
val &= 0x70U;
switch (val) {
case GEMINI_STAT_CIR:
- dev_info(gpw->dev, "infrared poweroff\n");
- orderly_poweroff(true);
+ /*
+ * We do not yet have a driver for the infrared
+ * controller so it can cause spurious poweroff
+ * events. Ignore those for now.
+ */
+ dev_info(gpw->dev, "infrared poweroff - ignored\n");
break;
case GEMINI_STAT_RTC:
dev_info(gpw->dev, "RTC poweroff\n");
@@ -116,7 +120,17 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
return -ENODEV;
}
- /* Clear the power management IRQ */
+ /*
+ * Enable the power controller. This is crucial on Gemini
+ * systems: if this is not done, pressing the power button
+ * will result in unconditional poweroff without any warning.
+ * This makes the kernel handle the poweroff.
+ */
+ val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+ val |= GEMINI_CTRL_ENABLE;
+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+ /* Now that the state machine is active, clear the IRQ */
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
@@ -129,16 +143,6 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
pm_power_off = gemini_poweroff;
gpw_poweroff = gpw;
- /*
- * Enable the power controller. This is crucial on Gemini
- * systems: if this is not done, pressing the power button
- * will result in unconditional poweroff without any warning.
- * This makes the kernel handle the poweroff.
- */
- val = readl(gpw->base + GEMINI_PWC_CTRLREG);
- val |= GEMINI_CTRL_ENABLE;
- writel(val, gpw->base + GEMINI_PWC_CTRLREG);
-
dev_info(dev, "Gemini poweroff driver registered\n");
return 0;
diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
index be3d81ff51cc..6273ad3b411d 100644
--- a/drivers/power/reset/gpio-poweroff.c
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -19,11 +19,13 @@
#include <linux/of_platform.h>
#include <linux/module.h>
+#define DEFAULT_TIMEOUT_MS 3000
/*
* Hold configuration here, cannot be more than one instance of the driver
* since pm_power_off itself is global.
*/
static struct gpio_desc *reset_gpio;
+static u32 timeout = DEFAULT_TIMEOUT_MS;
static void gpio_poweroff_do_poweroff(void)
{
@@ -40,7 +42,7 @@ static void gpio_poweroff_do_poweroff(void)
gpiod_set_value(reset_gpio, 1);
/* give it some time */
- mdelay(3000);
+ mdelay(timeout);
WARN_ON(1);
}
@@ -58,12 +60,14 @@ static int gpio_poweroff_probe(struct platform_device *pdev)
return -EBUSY;
}
- input = of_property_read_bool(pdev->dev.of_node, "input");
+ input = device_property_read_bool(&pdev->dev, "input");
if (input)
flags = GPIOD_IN;
else
flags = GPIOD_OUT_LOW;
+ device_property_read_u32(&pdev->dev, "timeout-ms", &timeout);
+
reset_gpio = devm_gpiod_get(&pdev->dev, NULL, flags);
if (IS_ERR(reset_gpio))
return PTR_ERR(reset_gpio);
diff --git a/drivers/power/reset/ocelot-reset.c b/drivers/power/reset/ocelot-reset.c
new file mode 100644
index 000000000000..5a13a5cc8188
--- /dev/null
+++ b/drivers/power/reset/ocelot-reset.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi MIPS SoC reset driver
+ *
+ * License: Dual MIT/GPL
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+struct ocelot_reset_context {
+ void __iomem *base;
+ struct regmap *cpu_ctrl;
+ struct notifier_block restart_handler;
+};
+
+#define ICPU_CFG_CPU_SYSTEM_CTRL_RESET 0x20
+#define CORE_RST_PROTECT BIT(2)
+
+#define SOFT_CHIP_RST BIT(0)
+
+static int ocelot_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct ocelot_reset_context *ctx = container_of(this, struct
+ ocelot_reset_context,
+ restart_handler);
+
+ /* Make sure the core is not protected from reset */
+ regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_RESET,
+ CORE_RST_PROTECT, 0);
+
+ writel(SOFT_CHIP_RST, ctx->base);
+
+ pr_emerg("Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int ocelot_reset_probe(struct platform_device *pdev)
+{
+ struct ocelot_reset_context *ctx;
+ struct resource *res;
+
+ struct device *dev = &pdev->dev;
+ int err;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ctx->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctx->base))
+ return PTR_ERR(ctx->base);
+
+ ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
+ if (IS_ERR(ctx->cpu_ctrl))
+ return PTR_ERR(ctx->cpu_ctrl);
+
+ ctx->restart_handler.notifier_call = ocelot_restart_handle;
+ ctx->restart_handler.priority = 192;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err)
+ dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct of_device_id ocelot_reset_of_match[] = {
+ { .compatible = "mscc,ocelot-chip-reset" },
+ {}
+};
+
+static struct platform_driver ocelot_reset_driver = {
+ .probe = ocelot_reset_probe,
+ .driver = {
+ .name = "ocelot-chip-reset",
+ .of_match_table = ocelot_reset_of_match,
+ },
+};
+builtin_platform_driver(ocelot_reset_driver);
diff --git a/drivers/power/reset/sc27xx-poweroff.c b/drivers/power/reset/sc27xx-poweroff.c
new file mode 100644
index 000000000000..29fb08b8faa0
--- /dev/null
+++ b/drivers/power/reset/sc27xx-poweroff.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/cpu.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/syscore_ops.h>
+
+#define SC27XX_PWR_PD_HW 0xc2c
+#define SC27XX_PWR_OFF_EN BIT(0)
+
+static struct regmap *regmap;
+
+/*
+ * On Spreadtrum platform, we need power off system through external SC27xx
+ * series PMICs, and it is one similar SPI bus mapped by regmap to access PMIC,
+ * which is not fast io access.
+ *
+ * So before stopping other cores, we need release other cores' resource by
+ * taking cpus down to avoid racing regmap or spi mutex lock when poweroff
+ * system through PMIC.
+ */
+static void sc27xx_poweroff_shutdown(void)
+{
+#ifdef CONFIG_PM_SLEEP_SMP
+ int cpu = smp_processor_id();
+
+ freeze_secondary_cpus(cpu);
+#endif
+}
+
+static struct syscore_ops poweroff_syscore_ops = {
+ .shutdown = sc27xx_poweroff_shutdown,
+};
+
+static void sc27xx_poweroff_do_poweroff(void)
+{
+ regmap_write(regmap, SC27XX_PWR_PD_HW, SC27XX_PWR_OFF_EN);
+}
+
+static int sc27xx_poweroff_probe(struct platform_device *pdev)
+{
+ if (regmap)
+ return -EINVAL;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ pm_power_off = sc27xx_poweroff_do_poweroff;
+ register_syscore_ops(&poweroff_syscore_ops);
+ return 0;
+}
+
+static struct platform_driver sc27xx_poweroff_driver = {
+ .probe = sc27xx_poweroff_probe,
+ .driver = {
+ .name = "sc27xx-poweroff",
+ },
+};
+builtin_platform_driver(sc27xx_poweroff_driver);
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
index 7494f0f0eadb..e84b6e4da14a 100644
--- a/drivers/power/supply/axp20x_battery.c
+++ b/drivers/power/supply/axp20x_battery.c
@@ -49,10 +49,22 @@
#define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5)
#define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5)
+#define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5)
+
#define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0)
#define AXP20X_V_OFF_MASK GENMASK(2, 0)
+struct axp20x_batt_ps;
+
+struct axp_data {
+ int ccc_scale;
+ int ccc_offset;
+ bool has_fg_valid;
+ int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
+ int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
+};
+
struct axp20x_batt_ps {
struct regmap *regmap;
struct power_supply *batt;
@@ -62,7 +74,7 @@ struct axp20x_batt_ps {
struct iio_channel *batt_v;
/* Maximum constant charge current */
unsigned int max_ccc;
- u8 axp_id;
+ const struct axp_data *data;
};
static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
@@ -123,20 +135,33 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
return 0;
}
-static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val)
+static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+ int *val)
{
- if (axp->axp_id == AXP209_ID)
- *val = *val * 100000 + 300000;
- else
- *val = *val * 150000 + 300000;
-}
+ int ret, reg;
-static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val)
-{
- if (axp->axp_id == AXP209_ID)
- *val = (*val - 300000) / 100000;
- else
- *val = (*val - 300000) / 150000;
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+ if (ret)
+ return ret;
+
+ switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+ case AXP20X_CHRG_CTRL1_TGT_4_1V:
+ *val = 4100000;
+ break;
+ case AXP20X_CHRG_CTRL1_TGT_4_15V:
+ *val = 4150000;
+ break;
+ case AXP20X_CHRG_CTRL1_TGT_4_2V:
+ *val = 4200000;
+ break;
+ case AXP813_CHRG_CTRL1_TGT_4_35V:
+ *val = 4350000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
}
static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
@@ -150,7 +175,7 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
*val &= AXP20X_CHRG_CTRL1_TGT_CURR;
- raw_to_constant_charge_current(axp, val);
+ *val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
return 0;
}
@@ -269,8 +294,7 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
if (ret)
return ret;
- if (axp20x_batt->axp_id == AXP221_ID &&
- !(reg & AXP22X_FG_VALID))
+ if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID))
return -EINVAL;
/*
@@ -281,11 +305,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- if (axp20x_batt->axp_id == AXP209_ID)
- return axp20x_battery_get_max_voltage(axp20x_batt,
- &val->intval);
- return axp22x_battery_get_max_voltage(axp20x_batt,
- &val->intval);
+ return axp20x_batt->data->get_max_voltage(axp20x_batt,
+ &val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, &reg);
@@ -312,6 +333,32 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
return 0;
}
+static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+ int val)
+{
+ switch (val) {
+ case 4100000:
+ val = AXP20X_CHRG_CTRL1_TGT_4_1V;
+ break;
+
+ case 4200000:
+ val = AXP20X_CHRG_CTRL1_TGT_4_2V;
+ break;
+
+ default:
+ /*
+ * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
+ * can be set to 4.22V and 4.24V, but these voltages are too
+ * high for Lithium based batteries (AXP PMICs are supposed to
+ * be used with these kinds of battery).
+ */
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+ AXP20X_CHRG_CTRL1_TGT_VOLT, val);
+}
+
static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
int val)
{
@@ -321,9 +368,6 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
break;
case 4150000:
- if (axp20x_batt->axp_id == AXP221_ID)
- return -EINVAL;
-
val = AXP20X_CHRG_CTRL1_TGT_4_15V;
break;
@@ -351,7 +395,8 @@ static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
if (charge_current > axp_batt->max_ccc)
return -EINVAL;
- constant_charge_current_to_raw(axp_batt, &charge_current);
+ charge_current = (charge_current - axp_batt->data->ccc_offset) /
+ axp_batt->data->ccc_scale;
if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
return -EINVAL;
@@ -365,12 +410,14 @@ static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
{
bool lower_max = false;
- constant_charge_current_to_raw(axp, &charge_current);
+ charge_current = (charge_current - axp->data->ccc_offset) /
+ axp->data->ccc_scale;
if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
return -EINVAL;
- raw_to_constant_charge_current(axp, &charge_current);
+ charge_current = charge_current * axp->data->ccc_scale +
+ axp->data->ccc_offset;
if (charge_current > axp->max_ccc)
dev_warn(axp->dev,
@@ -413,7 +460,7 @@ static int axp20x_battery_set_prop(struct power_supply *psy,
return axp20x_set_voltage_min_design(axp20x_batt, val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- return axp20x_battery_set_max_voltage(axp20x_batt, val->intval);
+ return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval);
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
return axp20x_set_constant_charge_current(axp20x_batt,
@@ -460,13 +507,39 @@ static const struct power_supply_desc axp20x_batt_ps_desc = {
.set_property = axp20x_battery_set_prop,
};
+static const struct axp_data axp209_data = {
+ .ccc_scale = 100000,
+ .ccc_offset = 300000,
+ .get_max_voltage = axp20x_battery_get_max_voltage,
+ .set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
+static const struct axp_data axp221_data = {
+ .ccc_scale = 150000,
+ .ccc_offset = 300000,
+ .has_fg_valid = true,
+ .get_max_voltage = axp22x_battery_get_max_voltage,
+ .set_max_voltage = axp22x_battery_set_max_voltage,
+};
+
+static const struct axp_data axp813_data = {
+ .ccc_scale = 200000,
+ .ccc_offset = 200000,
+ .has_fg_valid = true,
+ .get_max_voltage = axp813_battery_get_max_voltage,
+ .set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
static const struct of_device_id axp20x_battery_ps_id[] = {
{
.compatible = "x-powers,axp209-battery-power-supply",
- .data = (void *)AXP209_ID,
+ .data = (void *)&axp209_data,
}, {
.compatible = "x-powers,axp221-battery-power-supply",
- .data = (void *)AXP221_ID,
+ .data = (void *)&axp221_data,
+ }, {
+ .compatible = "x-powers,axp813-battery-power-supply",
+ .data = (void *)&axp813_data,
}, { /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
@@ -476,6 +549,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
struct axp20x_batt_ps *axp20x_batt;
struct power_supply_config psy_cfg = {};
struct power_supply_battery_info info;
+ struct device *dev = &pdev->dev;
if (!of_device_is_available(pdev->dev.of_node))
return -ENODEV;
@@ -516,7 +590,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
psy_cfg.drv_data = axp20x_batt;
psy_cfg.of_node = pdev->dev.of_node;
- axp20x_batt->axp_id = (uintptr_t)of_device_get_match_data(&pdev->dev);
+ axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
&axp20x_batt_ps_desc,
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index 4cc6e038dfdd..fd8f0b2210bc 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -343,7 +343,7 @@ static inline void fuel_gauge_remove_debugfs(struct axp288_fg_info *info)
static void fuel_gauge_get_status(struct axp288_fg_info *info)
{
- int pwr_stat, fg_res;
+ int pwr_stat, fg_res, curr, ret;
pwr_stat = fuel_gauge_reg_readb(info, AXP20X_PWR_INPUT_STATUS);
if (pwr_stat < 0) {
@@ -353,19 +353,42 @@ static void fuel_gauge_get_status(struct axp288_fg_info *info)
}
/* Report full if Vbus is valid and the reported capacity is 100% */
- if (pwr_stat & PS_STAT_VBUS_VALID) {
- fg_res = fuel_gauge_reg_readb(info, AXP20X_FG_RES);
- if (fg_res < 0) {
- dev_err(&info->pdev->dev,
- "FG RES read failed: %d\n", fg_res);
- return;
- }
- if (fg_res == (FG_REP_CAP_VALID | 100)) {
- info->status = POWER_SUPPLY_STATUS_FULL;
- return;
- }
+ if (!(pwr_stat & PS_STAT_VBUS_VALID))
+ goto not_full;
+
+ fg_res = fuel_gauge_reg_readb(info, AXP20X_FG_RES);
+ if (fg_res < 0) {
+ dev_err(&info->pdev->dev, "FG RES read failed: %d\n", fg_res);
+ return;
}
+ if (!(fg_res & FG_REP_CAP_VALID))
+ goto not_full;
+ fg_res &= ~FG_REP_CAP_VALID;
+ if (fg_res == 100) {
+ info->status = POWER_SUPPLY_STATUS_FULL;
+ return;
+ }
+
+ /*
+ * Sometimes the charger turns itself off before fg-res reaches 100%.
+ * When this happens the AXP288 reports a not-charging status and
+ * 0 mA discharge current.
+ */
+ if (fg_res < 90 || (pwr_stat & PS_STAT_BAT_CHRG_DIR))
+ goto not_full;
+
+ ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &curr);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "FG get current failed: %d\n", ret);
+ return;
+ }
+ if (curr == 0) {
+ info->status = POWER_SUPPLY_STATUS_FULL;
+ return;
+ }
+
+not_full:
if (pwr_stat & PS_STAT_BAT_CHRG_DIR)
info->status = POWER_SUPPLY_STATUS_CHARGING;
else
@@ -708,6 +731,12 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
},
},
+ {
+ /* ECS EF20EA */
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"),
+ },
+ },
{}
};
diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
index c4770a94cc8e..cbec70f3e73e 100644
--- a/drivers/power/supply/bq2415x_charger.c
+++ b/drivers/power/supply/bq2415x_charger.c
@@ -1037,7 +1037,10 @@ static int bq2415x_power_supply_init(struct bq2415x_device *bq)
int ret;
int chip;
char revstr[8];
- struct power_supply_config psy_cfg = { .drv_data = bq, };
+ struct power_supply_config psy_cfg = {
+ .drv_data = bq,
+ .of_node = bq->dev->of_node,
+ };
bq->charger_desc.name = bq->name;
bq->charger_desc.type = POWER_SUPPLY_TYPE_USB;
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index d99981542a46..7ce60519b1bc 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -1670,7 +1670,7 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
status = POWER_SUPPLY_STATUS_FULL;
else if (di->cache.flags & BQ27000_FLAG_CHGS)
status = POWER_SUPPLY_STATUS_CHARGING;
- else if (power_supply_am_i_supplied(di->bat))
+ else if (power_supply_am_i_supplied(di->bat) > 0)
status = POWER_SUPPLY_STATUS_NOT_CHARGING;
else
status = POWER_SUPPLY_STATUS_DISCHARGING;
diff --git a/drivers/power/supply/da9150-fg.c b/drivers/power/supply/da9150-fg.c
index 8b8ce978656a..1e2e5b0520c9 100644
--- a/drivers/power/supply/da9150-fg.c
+++ b/drivers/power/supply/da9150-fg.c
@@ -92,7 +92,7 @@ struct da9150_fg {
static u32 da9150_fg_read_attr(struct da9150_fg *fg, u8 code, u8 size)
{
- u8 buf[size];
+ u8 buf[DA9150_QIF_LONG_SIZE];
u8 read_addr;
u32 res = 0;
int i;
@@ -111,7 +111,7 @@ static void da9150_fg_write_attr(struct da9150_fg *fg, u8 code, u8 size,
u32 val)
{
- u8 buf[size];
+ u8 buf[DA9150_QIF_LONG_SIZE];
u8 write_addr;
int i;
diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index 001731e88718..bd2468ca6b63 100644
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c
@@ -28,14 +28,12 @@
#include <linux/power/gpio-charger.h>
struct gpio_charger {
- const struct gpio_charger_platform_data *pdata;
unsigned int irq;
bool wakeup_enabled;
struct power_supply *charger;
struct power_supply_desc charger_desc;
struct gpio_desc *gpiod;
- bool legacy_gpio_requested;
};
static irqreturn_t gpio_charger_irq(int irq, void *devid)
@@ -56,13 +54,10 @@ static int gpio_charger_get_property(struct power_supply *psy,
enum power_supply_property psp, union power_supply_propval *val)
{
struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
- const struct gpio_charger_platform_data *pdata = gpio_charger->pdata;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod);
- /* This xor is only ever used with legacy pdata GPIO */
- val->intval ^= pdata->gpio_active_low;
break;
default:
return -EINVAL;
@@ -71,175 +66,134 @@ static int gpio_charger_get_property(struct power_supply *psy,
return 0;
}
-static enum power_supply_property gpio_charger_properties[] = {
- POWER_SUPPLY_PROP_ONLINE,
-};
-
-static
-struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
+static enum power_supply_type gpio_charger_get_type(struct device *dev)
{
- struct device_node *np = dev->of_node;
- struct gpio_charger_platform_data *pdata;
const char *chargetype;
- int ret;
-
- if (!np)
- return ERR_PTR(-ENOENT);
-
- pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return ERR_PTR(-ENOMEM);
-
- pdata->name = np->name;
- pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
- ret = of_property_read_string(np, "charger-type", &chargetype);
- if (ret >= 0) {
- if (!strncmp("unknown", chargetype, 7))
- pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
- else if (!strncmp("battery", chargetype, 7))
- pdata->type = POWER_SUPPLY_TYPE_BATTERY;
- else if (!strncmp("ups", chargetype, 3))
- pdata->type = POWER_SUPPLY_TYPE_UPS;
- else if (!strncmp("mains", chargetype, 5))
- pdata->type = POWER_SUPPLY_TYPE_MAINS;
- else if (!strncmp("usb-sdp", chargetype, 7))
- pdata->type = POWER_SUPPLY_TYPE_USB;
- else if (!strncmp("usb-dcp", chargetype, 7))
- pdata->type = POWER_SUPPLY_TYPE_USB_DCP;
- else if (!strncmp("usb-cdp", chargetype, 7))
- pdata->type = POWER_SUPPLY_TYPE_USB_CDP;
- else if (!strncmp("usb-aca", chargetype, 7))
- pdata->type = POWER_SUPPLY_TYPE_USB_ACA;
- else
- dev_warn(dev, "unknown charger type %s\n", chargetype);
+
+ if (!device_property_read_string(dev, "charger-type", &chargetype)) {
+ if (!strcmp("unknown", chargetype))
+ return POWER_SUPPLY_TYPE_UNKNOWN;
+ if (!strcmp("battery", chargetype))
+ return POWER_SUPPLY_TYPE_BATTERY;
+ if (!strcmp("ups", chargetype))
+ return POWER_SUPPLY_TYPE_UPS;
+ if (!strcmp("mains", chargetype))
+ return POWER_SUPPLY_TYPE_MAINS;
+ if (!strcmp("usb-sdp", chargetype))
+ return POWER_SUPPLY_TYPE_USB;
+ if (!strcmp("usb-dcp", chargetype))
+ return POWER_SUPPLY_TYPE_USB_DCP;
+ if (!strcmp("usb-cdp", chargetype))
+ return POWER_SUPPLY_TYPE_USB_CDP;
+ if (!strcmp("usb-aca", chargetype))
+ return POWER_SUPPLY_TYPE_USB_ACA;
}
+ dev_warn(dev, "unknown charger type %s\n", chargetype);
- return pdata;
+ return POWER_SUPPLY_TYPE_UNKNOWN;
}
+static enum power_supply_property gpio_charger_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
static int gpio_charger_probe(struct platform_device *pdev)
{
- const struct gpio_charger_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ const struct gpio_charger_platform_data *pdata = dev->platform_data;
struct power_supply_config psy_cfg = {};
struct gpio_charger *gpio_charger;
struct power_supply_desc *charger_desc;
- int ret;
- int irq;
-
- if (!pdata) {
- pdata = gpio_charger_parse_dt(&pdev->dev);
- if (IS_ERR(pdata)) {
- ret = PTR_ERR(pdata);
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev, "No platform data\n");
- return ret;
- }
+ unsigned long flags;
+ int irq, ret;
+
+ if (!pdata && !dev->of_node) {
+ dev_err(dev, "No platform data\n");
+ return -ENOENT;
}
- gpio_charger = devm_kzalloc(&pdev->dev, sizeof(*gpio_charger),
- GFP_KERNEL);
- if (!gpio_charger) {
- dev_err(&pdev->dev, "Failed to alloc driver structure\n");
+ gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL);
+ if (!gpio_charger)
return -ENOMEM;
- }
/*
* This will fetch a GPIO descriptor from device tree, ACPI or
* boardfile descriptor tables. It's good to try this first.
*/
- gpio_charger->gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
+ gpio_charger->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
/*
* If this fails and we're not using device tree, try the
* legacy platform data method.
*/
- if (IS_ERR(gpio_charger->gpiod) && !pdev->dev.of_node) {
+ if (IS_ERR(gpio_charger->gpiod) && !dev->of_node) {
/* Non-DT: use legacy GPIO numbers */
if (!gpio_is_valid(pdata->gpio)) {
- dev_err(&pdev->dev, "Invalid gpio pin in pdata\n");
+ dev_err(dev, "Invalid gpio pin in pdata\n");
return -EINVAL;
}
- ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
+ flags = GPIOF_IN;
+ if (pdata->gpio_active_low)
+ flags |= GPIOF_ACTIVE_LOW;
+ ret = devm_gpio_request_one(dev, pdata->gpio, flags,
+ dev_name(dev));
if (ret) {
- dev_err(&pdev->dev, "Failed to request gpio pin: %d\n",
- ret);
+ dev_err(dev, "Failed to request gpio pin: %d\n", ret);
return ret;
}
- gpio_charger->legacy_gpio_requested = true;
- ret = gpio_direction_input(pdata->gpio);
- if (ret) {
- dev_err(&pdev->dev, "Failed to set gpio to input: %d\n",
- ret);
- goto err_gpio_free;
- }
/* Then convert this to gpiod for now */
gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
} else if (IS_ERR(gpio_charger->gpiod)) {
/* Just try again if this happens */
if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
return -EPROBE_DEFER;
- dev_err(&pdev->dev, "error getting GPIO descriptor\n");
+ dev_err(dev, "error getting GPIO descriptor\n");
return PTR_ERR(gpio_charger->gpiod);
}
charger_desc = &gpio_charger->charger_desc;
-
- charger_desc->name = pdata->name ? pdata->name : "gpio-charger";
- charger_desc->type = pdata->type;
charger_desc->properties = gpio_charger_properties;
charger_desc->num_properties = ARRAY_SIZE(gpio_charger_properties);
charger_desc->get_property = gpio_charger_get_property;
- psy_cfg.supplied_to = pdata->supplied_to;
- psy_cfg.num_supplicants = pdata->num_supplicants;
- psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.of_node = dev->of_node;
psy_cfg.drv_data = gpio_charger;
- gpio_charger->pdata = pdata;
+ if (pdata) {
+ charger_desc->name = pdata->name;
+ charger_desc->type = pdata->type;
+ psy_cfg.supplied_to = pdata->supplied_to;
+ psy_cfg.num_supplicants = pdata->num_supplicants;
+ } else {
+ charger_desc->name = dev->of_node->name;
+ charger_desc->type = gpio_charger_get_type(dev);
+ }
+
+ if (!charger_desc->name)
+ charger_desc->name = pdev->name;
- gpio_charger->charger = power_supply_register(&pdev->dev,
- charger_desc, &psy_cfg);
+ gpio_charger->charger = devm_power_supply_register(dev, charger_desc,
+ &psy_cfg);
if (IS_ERR(gpio_charger->charger)) {
ret = PTR_ERR(gpio_charger->charger);
- dev_err(&pdev->dev, "Failed to register power supply: %d\n",
- ret);
- goto err_gpio_free;
+ dev_err(dev, "Failed to register power supply: %d\n", ret);
+ return ret;
}
irq = gpiod_to_irq(gpio_charger->gpiod);
if (irq > 0) {
- ret = request_any_context_irq(irq, gpio_charger_irq,
+ ret = devm_request_any_context_irq(dev, irq, gpio_charger_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- dev_name(&pdev->dev), gpio_charger->charger);
+ dev_name(dev), gpio_charger->charger);
if (ret < 0)
- dev_warn(&pdev->dev, "Failed to request irq: %d\n", ret);
+ dev_warn(dev, "Failed to request irq: %d\n", ret);
else
gpio_charger->irq = irq;
}
platform_set_drvdata(pdev, gpio_charger);
- device_init_wakeup(&pdev->dev, 1);
-
- return 0;
-
-err_gpio_free:
- if (gpio_charger->legacy_gpio_requested)
- gpio_free(pdata->gpio);
- return ret;
-}
-
-static int gpio_charger_remove(struct platform_device *pdev)
-{
- struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
-
- if (gpio_charger->irq)
- free_irq(gpio_charger->irq, gpio_charger->charger);
-
- power_supply_unregister(gpio_charger->charger);
-
- if (gpio_charger->legacy_gpio_requested)
- gpio_free(gpio_charger->pdata->gpio);
+ device_init_wakeup(dev, 1);
return 0;
}
@@ -280,7 +234,6 @@ MODULE_DEVICE_TABLE(of, gpio_charger_match);
static struct platform_driver gpio_charger_driver = {
.probe = gpio_charger_probe,
- .remove = gpio_charger_remove,
.driver = {
.name = "gpio-charger",
.pm = &gpio_charger_pm_ops,
diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
index 4cfa3f0cd689..4f129bb4c972 100644
--- a/drivers/power/supply/ltc2941-battery-gauge.c
+++ b/drivers/power/supply/ltc2941-battery-gauge.c
@@ -34,6 +34,10 @@ enum ltc294x_reg {
LTC294X_REG_CONTROL = 0x01,
LTC294X_REG_ACC_CHARGE_MSB = 0x02,
LTC294X_REG_ACC_CHARGE_LSB = 0x03,
+ LTC294X_REG_CHARGE_THR_HIGH_MSB = 0x04,
+ LTC294X_REG_CHARGE_THR_HIGH_LSB = 0x05,
+ LTC294X_REG_CHARGE_THR_LOW_MSB = 0x06,
+ LTC294X_REG_CHARGE_THR_LOW_LSB = 0x07,
LTC294X_REG_VOLTAGE_MSB = 0x08,
LTC294X_REG_VOLTAGE_LSB = 0x09,
LTC2942_REG_TEMPERATURE_MSB = 0x0C,
@@ -179,21 +183,22 @@ error_exit:
return ret;
}
-static int ltc294x_read_charge_register(const struct ltc294x_info *info)
-{
+static int ltc294x_read_charge_register(const struct ltc294x_info *info,
+ enum ltc294x_reg reg)
+ {
int ret;
u8 datar[2];
- ret = ltc294x_read_regs(info->client,
- LTC294X_REG_ACC_CHARGE_MSB, &datar[0], 2);
+ ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
if (ret < 0)
return ret;
return (datar[0] << 8) + datar[1];
}
-static int ltc294x_get_charge_now(const struct ltc294x_info *info, int *val)
+static int ltc294x_get_charge(const struct ltc294x_info *info,
+ enum ltc294x_reg reg, int *val)
{
- int value = ltc294x_read_charge_register(info);
+ int value = ltc294x_read_charge_register(info, reg);
if (value < 0)
return value;
@@ -245,10 +250,29 @@ error_exit:
return ret < 0 ? ret : 0;
}
+static int ltc294x_set_charge_thr(const struct ltc294x_info *info,
+ enum ltc294x_reg reg, int val)
+{
+ u8 dataw[2];
+ s32 value;
+
+ value = convert_uAh_to_bin(info, val);
+ /* Direction depends on how sense+/- were connected */
+ if (info->Qlsb < 0)
+ value += 0xFFFF;
+ if ((value < 0) || (value > 0xFFFF)) /* input validation */
+ return -EINVAL;
+
+ /* Set new charge value */
+ dataw[0] = I16_MSB(value);
+ dataw[1] = I16_LSB(value);
+ return ltc294x_write_regs(info->client, reg, &dataw[0], 2);
+}
+
static int ltc294x_get_charge_counter(
const struct ltc294x_info *info, int *val)
{
- int value = ltc294x_read_charge_register(info);
+ int value = ltc294x_read_charge_register(info, LTC294X_REG_ACC_CHARGE_MSB);
if (value < 0)
return value;
@@ -317,15 +341,15 @@ static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
if (info->id == LTC2942_ID) {
reg = LTC2942_REG_TEMPERATURE_MSB;
- value = 60000; /* Full-scale is 600 Kelvin */
+ value = 6000; /* Full-scale is 600 Kelvin */
} else {
reg = LTC2943_REG_TEMPERATURE_MSB;
- value = 51000; /* Full-scale is 510 Kelvin */
+ value = 5100; /* Full-scale is 510 Kelvin */
}
ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
value *= (datar[0] << 8) | datar[1];
- /* Convert to centidegrees */
- *val = value / 0xFFFF - 27215;
+ /* Convert to tenths of degree Celsius */
+ *val = value / 0xFFFF - 2722;
return ret;
}
@@ -336,8 +360,15 @@ static int ltc294x_get_property(struct power_supply *psy,
struct ltc294x_info *info = power_supply_get_drvdata(psy);
switch (prop) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ return ltc294x_get_charge(info, LTC294X_REG_CHARGE_THR_HIGH_MSB,
+ &val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+ return ltc294x_get_charge(info, LTC294X_REG_CHARGE_THR_LOW_MSB,
+ &val->intval);
case POWER_SUPPLY_PROP_CHARGE_NOW:
- return ltc294x_get_charge_now(info, &val->intval);
+ return ltc294x_get_charge(info, LTC294X_REG_ACC_CHARGE_MSB,
+ &val->intval);
case POWER_SUPPLY_PROP_CHARGE_COUNTER:
return ltc294x_get_charge_counter(info, &val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
@@ -358,6 +389,12 @@ static int ltc294x_set_property(struct power_supply *psy,
struct ltc294x_info *info = power_supply_get_drvdata(psy);
switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ return ltc294x_set_charge_thr(info,
+ LTC294X_REG_CHARGE_THR_HIGH_MSB, val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+ return ltc294x_set_charge_thr(info,
+ LTC294X_REG_CHARGE_THR_LOW_MSB, val->intval);
case POWER_SUPPLY_PROP_CHARGE_NOW:
return ltc294x_set_charge_now(info, val->intval);
default:
@@ -369,6 +406,8 @@ static int ltc294x_property_is_writeable(
struct power_supply *psy, enum power_supply_property psp)
{
switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY:
case POWER_SUPPLY_PROP_CHARGE_NOW:
return 1;
default:
@@ -378,7 +417,7 @@ static int ltc294x_property_is_writeable(
static void ltc294x_update(struct ltc294x_info *info)
{
- int charge = ltc294x_read_charge_register(info);
+ int charge = ltc294x_read_charge_register(info, LTC294X_REG_ACC_CHARGE_MSB);
if (charge != info->charge) {
info->charge = charge;
@@ -397,6 +436,8 @@ static void ltc294x_work(struct work_struct *work)
static enum power_supply_property ltc294x_properties[] = {
POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_TEMP,
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index 35dde81b1c9b..1a568df383db 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -1053,6 +1053,7 @@ static int max17042_probe(struct i2c_client *client,
i2c_set_clientdata(client, chip);
psy_cfg.drv_data = chip;
+ psy_cfg.of_node = dev->of_node;
/* When current is not measured,
* CURRENT_NOW and CURRENT_AVG properties should be invisible. */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 13:02:32 +0000