summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/acpi_pnp.c2
-rw-r--r--drivers/input/gameport/gameport.c41
-rw-r--r--drivers/input/joystick/analog.c71
-rw-r--r--drivers/input/joystick/xpad.c34
-rw-r--r--drivers/input/keyboard/cros_ec_keyb.c92
-rw-r--r--drivers/input/misc/Kconfig43
-rw-r--r--drivers/input/misc/Makefile4
-rw-r--r--drivers/input/misc/drv260x.c741
-rw-r--r--drivers/input/misc/drv2667.c500
-rw-r--r--drivers/input/misc/max77693-haptic.c357
-rw-r--r--drivers/input/misc/palmas-pwrbutton.c332
-rw-r--r--drivers/input/misc/soc_button_array.c60
-rw-r--r--drivers/input/mouse/Makefile2
-rw-r--r--drivers/input/mouse/focaltech.c52
-rw-r--r--drivers/input/mouse/focaltech.h22
-rw-r--r--drivers/input/mouse/psmouse-base.c30
-rw-r--r--drivers/input/mouse/psmouse.h1
-rw-r--r--drivers/input/mouse/synaptics.c17
18 files changed, 2292 insertions, 109 deletions
diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c
index 996fa1959eea..1f8b20496f32 100644
--- a/drivers/acpi/acpi_pnp.c
+++ b/drivers/acpi/acpi_pnp.c
@@ -15,8 +15,6 @@
#include <linux/ctype.h>
static const struct acpi_device_id acpi_pnp_device_ids[] = {
- /* soc_button_array */
- {"PNP0C40"},
/* pata_isapnp */
{"PNP0600"}, /* Generic ESDI/IDE/ATA compatible hard disk controller */
/* floppy */
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 24c41ba7d4e0..e29c04e2aff4 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -23,6 +23,7 @@
#include <linux/workqueue.h>
#include <linux/sched.h> /* HZ */
#include <linux/mutex.h>
+#include <linux/timekeeping.h>
/*#include <asm/io.h>*/
@@ -30,6 +31,10 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Generic gameport layer");
MODULE_LICENSE("GPL");
+static bool use_ktime = true;
+module_param(use_ktime, bool, 0400);
+MODULE_PARM_DESC(use_ktime, "Use ktime for measuring I/O speed");
+
/*
* gameport_mutex protects entire gameport subsystem and is taken
* every time gameport port or driver registrered or unregistered.
@@ -76,6 +81,38 @@ static unsigned int get_time_pit(void)
static int gameport_measure_speed(struct gameport *gameport)
{
+ unsigned int i, t, tx;
+ u64 t1, t2, t3;
+ unsigned long flags;
+
+ if (gameport_open(gameport, NULL, GAMEPORT_MODE_RAW))
+ return 0;
+
+ tx = ~0;
+
+ for (i = 0; i < 50; i++) {
+ local_irq_save(flags);
+ t1 = ktime_get_ns();
+ for (t = 0; t < 50; t++)
+ gameport_read(gameport);
+ t2 = ktime_get_ns();
+ t3 = ktime_get_ns();
+ local_irq_restore(flags);
+ udelay(i * 10);
+ t = (t2 - t1) - (t3 - t2);
+ if (t < tx)
+ tx = t;
+ }
+
+ gameport_close(gameport);
+ t = 1000000 * 50;
+ if (tx)
+ t /= tx;
+ return t;
+}
+
+static int old_gameport_measure_speed(struct gameport *gameport)
+{
#if defined(__i386__)
unsigned int i, t, t1, t2, t3, tx;
@@ -521,7 +558,9 @@ static void gameport_add_port(struct gameport *gameport)
if (gameport->parent)
gameport->parent->child = gameport;
- gameport->speed = gameport_measure_speed(gameport);
+ gameport->speed = use_ktime ?
+ gameport_measure_speed(gameport) :
+ old_gameport_measure_speed(gameport);
list_add_tail(&gameport->node, &gameport_list);
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index ab0fdcd36e18..4284080e481d 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -36,6 +36,7 @@
#include <linux/gameport.h>
#include <linux/jiffies.h>
#include <linux/timex.h>
+#include <linux/timekeeping.h>
#define DRIVER_DESC "Analog joystick and gamepad driver"
@@ -43,6 +44,10 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
+static bool use_ktime = true;
+module_param(use_ktime, bool, 0400);
+MODULE_PARM_DESC(use_ktime, "Use ktime for measuring I/O speed");
+
/*
* Option parsing.
*/
@@ -171,6 +176,25 @@ static unsigned long analog_faketime = 0;
#warning Precise timer not defined for this architecture.
#endif
+static inline u64 get_time(void)
+{
+ if (use_ktime) {
+ return ktime_get_ns();
+ } else {
+ unsigned int x;
+ GET_TIME(x);
+ return x;
+ }
+}
+
+static inline unsigned int delta(u64 x, u64 y)
+{
+ if (use_ktime)
+ return y - x;
+ else
+ return DELTA((unsigned int)x, (unsigned int)y);
+}
+
/*
* analog_decode() decodes analog joystick data and reports input events.
*/
@@ -226,7 +250,8 @@ static void analog_decode(struct analog *analog, int *axes, int *initial, int bu
static int analog_cooked_read(struct analog_port *port)
{
struct gameport *gameport = port->gameport;
- unsigned int time[4], start, loop, now, loopout, timeout;
+ u64 time[4], start, loop, now;
+ unsigned int loopout, timeout;
unsigned char data[4], this, last;
unsigned long flags;
int i, j;
@@ -236,7 +261,7 @@ static int analog_cooked_read(struct analog_port *port)
local_irq_save(flags);
gameport_trigger(gameport);
- GET_TIME(now);
+ now = get_time();
local_irq_restore(flags);
start = now;
@@ -249,16 +274,16 @@ static int analog_cooked_read(struct analog_port *port)
local_irq_disable();
this = gameport_read(gameport) & port->mask;
- GET_TIME(now);
+ now = get_time();
local_irq_restore(flags);
- if ((last ^ this) && (DELTA(loop, now) < loopout)) {
+ if ((last ^ this) && (delta(loop, now) < loopout)) {
data[i] = last ^ this;
time[i] = now;
i++;
}
- } while (this && (i < 4) && (DELTA(start, now) < timeout));
+ } while (this && (i < 4) && (delta(start, now) < timeout));
this <<= 4;
@@ -266,7 +291,7 @@ static int analog_cooked_read(struct analog_port *port)
this |= data[i];
for (j = 0; j < 4; j++)
if (data[i] & (1 << j))
- port->axes[j] = (DELTA(start, time[i]) << ANALOG_FUZZ_BITS) / port->loop;
+ port->axes[j] = (delta(start, time[i]) << ANALOG_FUZZ_BITS) / port->loop;
}
return -(this != port->mask);
@@ -365,31 +390,39 @@ static void analog_close(struct input_dev *dev)
static void analog_calibrate_timer(struct analog_port *port)
{
struct gameport *gameport = port->gameport;
- unsigned int i, t, tx, t1, t2, t3;
+ unsigned int i, t, tx;
+ u64 t1, t2, t3;
unsigned long flags;
- local_irq_save(flags);
- GET_TIME(t1);
+ if (use_ktime) {
+ port->speed = 1000000;
+ } else {
+ local_irq_save(flags);
+ t1 = get_time();
#ifdef FAKE_TIME
- analog_faketime += 830;
+ analog_faketime += 830;
#endif
- mdelay(1);
- GET_TIME(t2);
- GET_TIME(t3);
- local_irq_restore(flags);
+ mdelay(1);
+ t2 = get_time();
+ t3 = get_time();
+ local_irq_restore(flags);
- port->speed = DELTA(t1, t2) - DELTA(t2, t3);
+ port->speed = delta(t1, t2) - delta(t2, t3);
+ }
tx = ~0;
for (i = 0; i < 50; i++) {
local_irq_save(flags);
- GET_TIME(t1);
- for (t = 0; t < 50; t++) { gameport_read(gameport); GET_TIME(t2); }
- GET_TIME(t3);
+ t1 = get_time();
+ for (t = 0; t < 50; t++) {
+ gameport_read(gameport);
+ t2 = get_time();
+ }
+ t3 = get_time();
local_irq_restore(flags);
udelay(i);
- t = DELTA(t1, t2) - DELTA(t2, t3);
+ t = delta(t1, t2) - delta(t2, t3);
if (t < tx) tx = t;
}
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 177602cf7079..cd13c82ca0a1 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -126,7 +126,9 @@ static const struct xpad_device {
{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+ { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
+ { 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
@@ -140,10 +142,17 @@ static const struct xpad_device {
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
+ { 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
@@ -156,28 +165,50 @@ static const struct xpad_device {
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
+ { 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
+ { 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
+ { 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
+ { 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 },
+ { 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
@@ -274,6 +305,9 @@ static struct usb_device_id xpad_table[] = {
XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
+ XPAD_XBOX360_VENDOR(0x1532), /* Razer Sabertooth */
+ XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */
+ XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */
{ }
};
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index 791781ade4e7..72d3499bb029 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -22,6 +22,7 @@
*/
#include <linux/module.h>
+#include <linux/bitops.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
@@ -38,6 +39,7 @@
* @row_shift: log2 or number of rows, rounded up
* @keymap_data: Matrix keymap data used to convert to keyscan values
* @ghost_filter: true to enable the matrix key-ghosting filter
+ * @valid_keys: bitmap of existing keys for each matrix column
* @old_kb_state: bitmap of keys pressed last scan
* @dev: Device pointer
* @idev: Input device
@@ -49,6 +51,7 @@ struct cros_ec_keyb {
int row_shift;
const struct matrix_keymap_data *keymap_data;
bool ghost_filter;
+ uint8_t *valid_keys;
uint8_t *old_kb_state;
struct device *dev;
@@ -57,39 +60,15 @@ struct cros_ec_keyb {
};
-static bool cros_ec_keyb_row_has_ghosting(struct cros_ec_keyb *ckdev,
- uint8_t *buf, int row)
-{
- int pressed_in_row = 0;
- int row_has_teeth = 0;
- int col, mask;
-
- mask = 1 << row;
- for (col = 0; col < ckdev->cols; col++) {
- if (buf[col] & mask) {
- pressed_in_row++;
- row_has_teeth |= buf[col] & ~mask;
- if (pressed_in_row > 1 && row_has_teeth) {
- /* ghosting */
- dev_dbg(ckdev->dev,
- "ghost found at: r%d c%d, pressed %d, teeth 0x%x\n",
- row, col, pressed_in_row,
- row_has_teeth);
- return true;
- }
- }
- }
-
- return false;
-}
-
/*
* Returns true when there is at least one combination of pressed keys that
* results in ghosting.
*/
static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf)
{
- int row;
+ int col1, col2, buf1, buf2;
+ struct device *dev = ckdev->dev;
+ uint8_t *valid_keys = ckdev->valid_keys;
/*
* Ghosting happens if for any pressed key X there are other keys
@@ -103,27 +82,23 @@ static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf)
*
* In this case only X, Y, and Z are pressed, but g appears to be
* pressed too (see Wikipedia).
- *
- * We can detect ghosting in a single pass (*) over the keyboard state
- * by maintaining two arrays. pressed_in_row counts how many pressed
- * keys we have found in a row. row_has_teeth is true if any of the
- * pressed keys for this row has other pressed keys in its column. If
- * at any point of the scan we find that a row has multiple pressed
- * keys, and at least one of them is at the intersection with a column
- * with multiple pressed keys, we're sure there is ghosting.
- * Conversely, if there is ghosting, we will detect such situation for
- * at least one key during the pass.
- *
- * (*) This looks linear in the number of keys, but it's not. We can
- * cheat because the number of rows is small.
*/
- for (row = 0; row < ckdev->rows; row++)
- if (cros_ec_keyb_row_has_ghosting(ckdev, buf, row))
- return true;
+ for (col1 = 0; col1 < ckdev->cols; col1++) {
+ buf1 = buf[col1] & valid_keys[col1];
+ for (col2 = col1 + 1; col2 < ckdev->cols; col2++) {
+ buf2 = buf[col2] & valid_keys[col2];
+ if (hweight8(buf1 & buf2) > 1) {
+ dev_dbg(dev, "ghost found at: B[%02d]:0x%02x & B[%02d]:0x%02x",
+ col1, buf1, col2, buf2);
+ return true;
+ }
+ }
+ }
return false;
}
+
/*
* Compares the new keyboard state to the old one and produces key
* press/release events accordingly. The keyboard state is 13 bytes (one byte
@@ -222,6 +197,30 @@ static void cros_ec_keyb_close(struct input_dev *dev)
free_irq(ec->irq, ckdev);
}
+/*
+ * Walks keycodes flipping bit in buffer COLUMNS deep where bit is ROW. Used by
+ * ghosting logic to ignore NULL or virtual keys.
+ */
+static void cros_ec_keyb_compute_valid_keys(struct cros_ec_keyb *ckdev)
+{
+ int row, col;
+ int row_shift = ckdev->row_shift;
+ unsigned short *keymap = ckdev->idev->keycode;
+ unsigned short code;
+
+ BUG_ON(ckdev->idev->keycodesize != sizeof(*keymap));
+
+ for (col = 0; col < ckdev->cols; col++) {
+ for (row = 0; row < ckdev->rows; row++) {
+ code = keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
+ if (code && (code != KEY_BATTERY))
+ ckdev->valid_keys[col] |= 1 << row;
+ }
+ dev_dbg(ckdev->dev, "valid_keys[%02d] = 0x%02x\n",
+ col, ckdev->valid_keys[col]);
+ }
+}
+
static int cros_ec_keyb_probe(struct platform_device *pdev)
{
struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
@@ -242,6 +241,11 @@ static int cros_ec_keyb_probe(struct platform_device *pdev)
&ckdev->cols);
if (err)
return err;
+
+ ckdev->valid_keys = devm_kzalloc(&pdev->dev, ckdev->cols, GFP_KERNEL);
+ if (!ckdev->valid_keys)
+ return -ENOMEM;
+
ckdev->old_kb_state = devm_kzalloc(&pdev->dev, ckdev->cols, GFP_KERNEL);
if (!ckdev->old_kb_state)
return -ENOMEM;
@@ -285,6 +289,8 @@ static int cros_ec_keyb_probe(struct platform_device *pdev)
input_set_capability(idev, EV_MSC, MSC_SCAN);
input_set_drvdata(idev, ckdev);
ckdev->idev = idev;
+ cros_ec_keyb_compute_valid_keys(ckdev);
+
err = input_register_device(ckdev->idev);
if (err) {
dev_err(dev, "cannot register input device\n");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 2ff4425a893b..23297ab6163f 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -144,6 +144,17 @@ config INPUT_M68K_BEEP
tristate "M68k Beeper support"
depends on M68K
+config INPUT_MAX77693_HAPTIC
+ tristate "MAXIM MAX77693 haptic controller support"
+ depends on MFD_MAX77693 && PWM
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for the haptic controller on
+ MAXIM MAX77693 chip.
+
+ To compile this driver as module, choose M here: the
+ module will be called max77693-haptic.
+
config INPUT_MAX8925_ONKEY
tristate "MAX8925 ONKEY support"
depends on MFD_MAX8925
@@ -451,6 +462,16 @@ config HP_SDC_RTC
Say Y here if you want to support the built-in real time clock
of the HP SDC controller.
+config INPUT_PALMAS_PWRBUTTON
+ tristate "Palmas Power button Driver"
+ depends on MFD_PALMAS
+ help
+ Say Y here if you want to enable power key reporting via the
+ Palmas family of PMICs.
+
+ To compile this driver as a module, choose M here. The module will
+ be called palmas_pwrbutton.
+
config INPUT_PCF50633_PMU
tristate "PCF50633 PMU events"
depends on MFD_PCF50633
@@ -676,4 +697,26 @@ config INPUT_SOC_BUTTON_ARRAY
To compile this driver as a module, choose M here: the
module will be called soc_button_array.
+config INPUT_DRV260X_HAPTICS
+ tristate "TI DRV260X haptics support"
+ depends on INPUT && I2C && GPIOLIB
+ select INPUT_FF_MEMLESS
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI DRV260X haptics driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called drv260x-haptics.
+
+config INPUT_DRV2667_HAPTICS
+ tristate "TI DRV2667 haptics support"
+ depends on INPUT && I2C
+ select INPUT_FF_MEMLESS
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI DRV2667 haptics driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called drv260x-haptics.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 4955ad322a01..19c760361f80 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
+obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
+obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
@@ -35,11 +37,13 @@ obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
+obj-$(CONFIG_INPUT_MAX77693_HAPTIC) += max77693-haptic.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o
+obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON) += palmas-pwrbutton.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
new file mode 100644
index 000000000000..cab87f5ce6d3
--- /dev/null
+++ b/drivers/input/misc/drv260x.c
@@ -0,0 +1,741 @@
+/*
+ * DRV260X haptics driver family
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * Copyright: (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include <dt-bindings/input/ti-drv260x.h>
+#include <linux/platform_data/drv260x-pdata.h>
+
+#define DRV260X_STATUS 0x0
+#define DRV260X_MODE 0x1
+#define DRV260X_RT_PB_IN 0x2
+#define DRV260X_LIB_SEL 0x3
+#define DRV260X_WV_SEQ_1 0x4
+#define DRV260X_WV_SEQ_2 0x5
+#define DRV260X_WV_SEQ_3 0x6
+#define DRV260X_WV_SEQ_4 0x7
+#define DRV260X_WV_SEQ_5 0x8
+#define DRV260X_WV_SEQ_6 0x9
+#define DRV260X_WV_SEQ_7 0xa
+#define DRV260X_WV_SEQ_8 0xb
+#define DRV260X_GO 0xc
+#define DRV260X_OVERDRIVE_OFF 0xd
+#define DRV260X_SUSTAIN_P_OFF 0xe
+#define DRV260X_SUSTAIN_N_OFF 0xf
+#define DRV260X_BRAKE_OFF 0x10
+#define DRV260X_A_TO_V_CTRL 0x11
+#define DRV260X_A_TO_V_MIN_INPUT 0x12
+#define DRV260X_A_TO_V_MAX_INPUT 0x13
+#define DRV260X_A_TO_V_MIN_OUT 0x14
+#define DRV260X_A_TO_V_MAX_OUT 0x15
+#define DRV260X_RATED_VOLT 0x16
+#define DRV260X_OD_CLAMP_VOLT 0x17
+#define DRV260X_CAL_COMP 0x18
+#define DRV260X_CAL_BACK_EMF 0x19
+#define DRV260X_FEEDBACK_CTRL 0x1a
+#define DRV260X_CTRL1 0x1b
+#define DRV260X_CTRL2 0x1c
+#define DRV260X_CTRL3 0x1d
+#define DRV260X_CTRL4 0x1e
+#define DRV260X_CTRL5 0x1f
+#define DRV260X_LRA_LOOP_PERIOD 0x20
+#define DRV260X_VBAT_MON 0x21
+#define DRV260X_LRA_RES_PERIOD 0x22
+#define DRV260X_MAX_REG 0x23
+
+#define DRV260X_GO_BIT 0x01
+
+/* Library Selection */
+#define DRV260X_LIB_SEL_MASK 0x07
+#define DRV260X_LIB_SEL_RAM 0x0
+#define DRV260X_LIB_SEL_OD 0x1
+#define DRV260X_LIB_SEL_40_60 0x2
+#define DRV260X_LIB_SEL_60_80 0x3
+#define DRV260X_LIB_SEL_100_140 0x4
+#define DRV260X_LIB_SEL_140_PLUS 0x5
+
+#define DRV260X_LIB_SEL_HIZ_MASK 0x10
+#define DRV260X_LIB_SEL_HIZ_EN 0x01
+#define DRV260X_LIB_SEL_HIZ_DIS 0
+
+/* Mode register */
+#define DRV260X_STANDBY (1 << 6)
+#define DRV260X_STANDBY_MASK 0x40
+#define DRV260X_INTERNAL_TRIGGER 0x00
+#define DRV260X_EXT_TRIGGER_EDGE 0x01
+#define DRV260X_EXT_TRIGGER_LEVEL 0x02
+#define DRV260X_PWM_ANALOG_IN 0x03
+#define DRV260X_AUDIOHAPTIC 0x04
+#define DRV260X_RT_PLAYBACK 0x05
+#define DRV260X_DIAGNOSTICS 0x06
+#define DRV260X_AUTO_CAL 0x07
+
+/* Audio to Haptics Control */
+#define DRV260X_AUDIO_HAPTICS_PEAK_10MS (0 << 2)
+#define DRV260X_AUDIO_HAPTICS_PEAK_20MS (1 << 2)
+#define DRV260X_AUDIO_HAPTICS_PEAK_30MS (2 << 2)
+#define DRV260X_AUDIO_HAPTICS_PEAK_40MS (3 << 2)
+
+#define DRV260X_AUDIO_HAPTICS_FILTER_100HZ 0x00
+#define DRV260X_AUDIO_HAPTICS_FILTER_125HZ 0x01
+#define DRV260X_AUDIO_HAPTICS_FILTER_150HZ 0x02
+#define DRV260X_AUDIO_HAPTICS_FILTER_200HZ 0x03
+
+/* Min/Max Input/Output Voltages */
+#define DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT 0x19
+#define DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT 0x64
+#define DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT 0x19
+#define DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT 0xFF
+
+/* Feedback register */
+#define DRV260X_FB_REG_ERM_MODE 0x7f
+#define DRV260X_FB_REG_LRA_MODE (1 << 7)
+
+#define DRV260X_BRAKE_FACTOR_MASK 0x1f
+#define DRV260X_BRAKE_FACTOR_2X (1 << 0)
+#define DRV260X_BRAKE_FACTOR_3X (2 << 4)
+#define DRV260X_BRAKE_FACTOR_4X (3 << 4)
+#define DRV260X_BRAKE_FACTOR_6X (4 << 4)
+#define DRV260X_BRAKE_FACTOR_8X (5 << 4)
+#define DRV260X_BRAKE_FACTOR_16 (6 << 4)
+#define DRV260X_BRAKE_FACTOR_DIS (7 << 4)
+
+#define DRV260X_LOOP_GAIN_LOW 0xf3
+#define DRV260X_LOOP_GAIN_MED (1 << 2)
+#define DRV260X_LOOP_GAIN_HIGH (2 << 2)
+#define DRV260X_LOOP_GAIN_VERY_HIGH (3 << 2)
+
+#define DRV260X_BEMF_GAIN_0 0xfc
+#define DRV260X_BEMF_GAIN_1 (1 << 0)
+#define DRV260X_BEMF_GAIN_2 (2 << 0)
+#define DRV260X_BEMF_GAIN_3 (3 << 0)
+
+/* Control 1 register */
+#define DRV260X_AC_CPLE_EN (1 << 5)
+#define DRV260X_STARTUP_BOOST (1 << 7)
+
+/* Control 2 register */
+
+#define DRV260X_IDISS_TIME_45 0
+#define DRV260X_IDISS_TIME_75 (1 << 0)
+#define DRV260X_IDISS_TIME_150 (1 << 1)
+#define DRV260X_IDISS_TIME_225 0x03
+
+#define DRV260X_BLANK_TIME_45 (0 << 2)
+#define DRV260X_BLANK_TIME_75 (1 << 2)
+#define DRV260X_BLANK_TIME_150 (2 << 2)
+#define DRV260X_BLANK_TIME_225 (3 << 2)
+
+#define DRV260X_SAMP_TIME_150 (0 << 4)
+#define DRV260X_SAMP_TIME_200 (1 << 4)
+#define DRV260X_SAMP_TIME_250 (2 << 4)
+#define DRV260X_SAMP_TIME_300 (3 << 4)
+
+#define DRV260X_BRAKE_STABILIZER (1 << 6)
+#define DRV260X_UNIDIR_IN (0 << 7)
+#define DRV260X_BIDIR_IN (1 << 7)
+
+/* Control 3 Register */
+#define DRV260X_LRA_OPEN_LOOP (1 << 0)
+#define DRV260X_ANANLOG_IN (1 << 1)
+#define DRV260X_LRA_DRV_MODE (1 << 2)
+#define DRV260X_RTP_UNSIGNED_DATA (1 << 3)
+#define DRV260X_SUPPLY_COMP_DIS (1 << 4)
+#define DRV260X_ERM_OPEN_LOOP (1 << 5)
+#define DRV260X_NG_THRESH_0 (0 << 6)
+#define DRV260X_NG_THRESH_2 (1 << 6)
+#define DRV260X_NG_THRESH_4 (2 << 6)
+#define DRV260X_NG_THRESH_8 (3 << 6)
+
+/* Control 4 Register */
+#define DRV260X_AUTOCAL_TIME_150MS (0 << 4)
+#define DRV260X_AUTOCAL_TIME_250MS (1 << 4)
+#define DRV260X_AUTOCAL_TIME_500MS (2 << 4)
+#define DRV260X_AUTOCAL_TIME_1000MS (3 << 4)
+
+/**
+ * struct drv260x_data -
+ * @input_dev - Pointer to the input device
+ * @client - Pointer to the I2C client
+ * @regmap - Register map of the device
+ * @work - Work item used to off load the enable/disable of the vibration
+ * @enable_gpio - Pointer to the gpio used for enable/disabling
+ * @regulator - Pointer to the regulator for the IC
+ * @magnitude - Magnitude of the vibration event
+ * @mode - The operating mode of the IC (LRA_NO_CAL, ERM or LRA)
+ * @library - The vibration library to be used
+ * @rated_voltage - The rated_voltage of the actuator
+ * @overdriver_voltage - The over drive voltage of the actuator
+**/
+struct drv260x_data {
+ struct input_dev *input_dev;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct work_struct work;
+ struct gpio_desc *enable_gpio;
+ struct regulator *regulator;
+ u32 magnitude;
+ u32 mode;
+ u32 library;
+ int rated_voltage;
+ int overdrive_voltage;
+};
+
+static struct reg_default drv260x_reg_defs[] = {
+ { DRV260X_STATUS, 0xe0 },
+ { DRV260X_MODE, 0x40 },
+ { DRV260X_RT_PB_IN, 0x00 },
+ { DRV260X_LIB_SEL, 0x00 },
+ { DRV260X_WV_SEQ_1, 0x01 },
+ { DRV260X_WV_SEQ_2, 0x00 },
+ { DRV260X_WV_SEQ_3, 0x00 },
+ { DRV260X_WV_SEQ_4, 0x00 },
+ { DRV260X_WV_SEQ_5, 0x00 },
+ { DRV260X_WV_SEQ_6, 0x00 },
+ { DRV260X_WV_SEQ_7, 0x00 },
+ { DRV260X_WV_SEQ_8, 0x00 },
+ { DRV260X_GO, 0x00 },
+ { DRV260X_OVERDRIVE_OFF, 0x00 },
+ { DRV260X_SUSTAIN_P_OFF, 0x00 },
+ { DRV260X_SUSTAIN_N_OFF, 0x00 },
+ { DRV260X_BRAKE_OFF, 0x00 },
+ { DRV260X_A_TO_V_CTRL, 0x05 },
+ { DRV260X_A_TO_V_MIN_INPUT, 0x19 },
+ { DRV260X_A_TO_V_MAX_INPUT, 0xff },
+ { DRV260X_A_TO_V_MIN_OUT, 0x19 },
+ { DRV260X_A_TO_V_MAX_OUT, 0xff },
+ { DRV260X_RATED_VOLT, 0x3e },
+ { DRV260X_OD_CLAMP_VOLT, 0x8c },
+ { DRV260X_CAL_COMP, 0x0c },
+ { DRV260X_CAL_BACK_EMF, 0x6c },
+ { DRV260X_FEEDBACK_CTRL, 0x36 },
+ { DRV260X_CTRL1, 0x93 },
+ { DRV260X_CTRL2, 0xfa },
+ { DRV260X_CTRL3, 0xa0 },
+ { DRV260X_CTRL4, 0x20 },
+ { DRV260X_CTRL5, 0x80 },
+ { DRV260X_LRA_LOOP_PERIOD, 0x33 },
+ { DRV260X_VBAT_MON, 0x00 },
+ { DRV260X_LRA_RES_PERIOD, 0x00 },
+};
+
+#define DRV260X_DEF_RATED_VOLT 0x90
+#define DRV260X_DEF_OD_CLAMP_VOLT 0x90
+
+/**
+ * Rated and Overdriver Voltages:
+ * Calculated using the formula r = v * 255 / 5.6
+ * where r is what will be written to the register
+ * and v is the rated or overdriver voltage of the actuator
+ **/
+static int drv260x_calculate_voltage(unsigned int voltage)
+{
+ return (voltage * 255 / 5600);
+}
+
+static void drv260x_worker(struct work_struct *work)
+{
+ struct drv260x_data *haptics = container_of(work, struct drv260x_data, work);
+ int error;
+
+ gpiod_set_value(haptics->enable_gpio, 1);
+ /* Data sheet says to wait 250us before trying to communicate */
+ udelay(250);
+
+ error = regmap_write(haptics->regmap,
+ DRV260X_MODE, DRV260X_RT_PLAYBACK);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write set mode: %d\n", error);
+ } else {
+ error = regmap_write(haptics->regmap,
+ DRV260X_RT_PB_IN, haptics->magnitude);
+ if (error)
+ dev_err(&haptics->client->dev,
+ "Failed to set magnitude: %d\n", error);
+ }
+}
+
+static int drv260x_haptics_play(struct input_dev *input, void *data,
+ struct ff_effect *effect)
+{
+ struct drv260x_data *haptics = input_get_drvdata(input);
+
+ haptics->mode = DRV260X_LRA_NO_CAL_MODE;
+
+ if (effect->u.rumble.strong_magnitude > 0)
+ haptics->magnitude = effect->u.rumble.strong_magnitude;
+ else if (effect->u.rumble.weak_magnitude > 0)
+ haptics->magnitude = effect->u.rumble.weak_magnitude;
+ else
+ haptics->magnitude = 0;
+
+ schedule_work(&haptics->work);
+
+ return 0;
+}
+
+static void drv260x_close(struct input_dev *input)
+{
+ struct drv260x_data *haptics = input_get_drvdata(input);
+ int error;
+
+ cancel_work_sync(&haptics->work);
+
+ error = regmap_write(haptics->regmap, DRV260X_MODE, DRV260X_STANDBY);
+ if (error)
+ dev_err(&haptics->client->dev,
+ "Failed to enter standby mode: %d\n", error);
+
+ gpiod_set_value(haptics->enable_gpio, 0);
+}
+
+static const struct reg_default drv260x_lra_cal_regs[] = {
+ { DRV260X_MODE, DRV260X_AUTO_CAL },
+ { DRV260X_CTRL3, DRV260X_NG_THRESH_2 },
+ { DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE |
+ DRV260X_BRAKE_FACTOR_4X | DRV260X_LOOP_GAIN_HIGH },
+};
+
+static const struct reg_default drv260x_lra_init_regs[] = {
+ { DRV260X_MODE, DRV260X_RT_PLAYBACK },
+ { DRV260X_A_TO_V_CTRL, DRV260X_AUDIO_HAPTICS_PEAK_20MS |
+ DRV260X_AUDIO_HAPTICS_FILTER_125HZ },
+ { DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT },
+ { DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT },
+ { DRV260X_A_TO_V_MIN_OUT, DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT },
+ { DRV260X_A_TO_V_MAX_OUT, DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT },
+ { DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE |
+ DRV260X_BRAKE_FACTOR_2X | DRV260X_LOOP_GAIN_MED |
+ DRV260X_BEMF_GAIN_3 },
+ { DRV260X_CTRL1, DRV260X_STARTUP_BOOST },
+ { DRV260X_CTRL2, DRV260X_SAMP_TIME_250 },
+ { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_ANANLOG_IN },
+ { DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS },
+};
+
+static const struct reg_default drv260x_erm_cal_regs[] = {
+ { DRV260X_MODE, DRV260X_AUTO_CAL },
+ { DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT },
+ { DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT },
+ { DRV260X_A_TO_V_MIN_OUT, DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT },
+ { DRV260X_A_TO_V_MAX_OUT, DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT },
+ { DRV260X_FEEDBACK_CTRL, DRV260X_BRAKE_FACTOR_3X |
+ DRV260X_LOOP_GAIN_MED | DRV260X_BEMF_GAIN_2 },
+ { DRV260X_CTRL1, DRV260X_STARTUP_BOOST },
+ { DRV260X_CTRL2, DRV260X_SAMP_TIME_250 | DRV260X_BLANK_TIME_75 |
+ DRV260X_IDISS_TIME_75 },
+ { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_ERM_OPEN_LOOP },
+ { DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS },
+};
+
+static int drv260x_init(struct drv260x_data *haptics)
+{
+ int error;
+ unsigned int cal_buf;
+
+ error = regmap_write(haptics->regmap,
+ DRV260X_RATED_VOLT, haptics->rated_voltage);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write DRV260X_RATED_VOLT register: %d\n",
+ error);
+ return error;
+ }
+
+ error = regmap_write(haptics->regmap,
+ DRV260X_OD_CLAMP_VOLT, haptics->overdrive_voltage);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write DRV260X_OD_CLAMP_VOLT register: %d\n",
+ error);
+ return error;
+ }
+
+ switch (haptics->mode) {
+ case DRV260X_LRA_MODE:
+ error = regmap_register_patch(haptics->regmap,
+ drv260x_lra_cal_regs,
+ ARRAY_SIZE(drv260x_lra_cal_regs));
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write LRA calibration registers: %d\n",
+ error);
+ return error;
+ }
+
+ break;
+
+ case DRV260X_ERM_MODE:
+ error = regmap_register_patch(haptics->regmap,
+ drv260x_erm_cal_regs,
+ ARRAY_SIZE(drv260x_erm_cal_regs));
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write ERM calibration registers: %d\n",
+ error);
+ return error;
+ }
+
+ error = regmap_update_bits(haptics->regmap, DRV260X_LIB_SEL,
+ DRV260X_LIB_SEL_MASK,
+ haptics->library);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write DRV260X_LIB_SEL register: %d\n",
+ error);
+ return error;
+ }
+
+ break;
+
+ default:
+ error = regmap_register_patch(haptics->regmap,
+ drv260x_lra_init_regs,
+ ARRAY_SIZE(drv260x_lra_init_regs));
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write LRA init registers: %d\n",
+ error);
+ return error;
+ }
+
+ error = regmap_update_bits(haptics->regmap, DRV260X_LIB_SEL,
+ DRV260X_LIB_SEL_MASK,
+ haptics->library);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write DRV260X_LIB_SEL register: %d\n",
+ error);
+ return error;
+ }
+
+ /* No need to set GO bit here */
+ return 0;
+ }
+
+ error = regmap_write(haptics->regmap, DRV260X_GO, DRV260X_GO_BIT);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write GO register: %d\n",
+ error);
+ return error;
+ }
+
+ do {
+ error = regmap_read(haptics->regmap, DRV260X_GO, &cal_buf);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to read GO register: %d\n",
+ error);
+ return error;
+ }
+ } while (cal_buf == DRV260X_GO_BIT);
+
+ return 0;
+}
+
+static const struct regmap_config drv260x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = DRV260X_MAX_REG,
+ .reg_defaults = drv260x_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(drv260x_reg_defs),
+ .cache_type = REGCACHE_NONE,
+};
+
+#ifdef CONFIG_OF
+static int drv260x_parse_dt(struct device *dev,
+ struct drv260x_data *haptics)
+{
+ struct device_node *np = dev->of_node;
+ unsigned int voltage;
+ int error;
+
+ error = of_property_read_u32(np, "mode", &haptics->mode);
+ if (error) {
+ dev_err(dev, "%s: No entry for mode\n", __func__);
+ return error;
+ }
+
+ error = of_property_read_u32(np, "library-sel", &haptics->library);
+ if (error) {
+ dev_err(dev, "%s: No entry for library selection\n",
+ __func__);
+ return error;
+ }
+
+ error = of_property_read_u32(np, "vib-rated-mv", &voltage);
+ if (!error)
+ haptics->rated_voltage = drv260x_calculate_voltage(voltage);
+
+
+ error = of_property_read_u32(np, "vib-overdrive-mv", &voltage);
+ if (!error)
+ haptics->overdrive_voltage = drv260x_calculate_voltage(voltage);
+
+ return 0;
+}
+#else
+static inline int drv260x_parse_dt(struct device *dev,
+ struct drv260x_data *haptics)
+{
+ dev_err(dev, "no platform data defined\n");
+
+ return -EINVAL;
+}
+#endif
+
+static int drv260x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct drv260x_data *haptics;
+ int error;
+
+ haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
+ if (!haptics)
+ return -ENOMEM;
+
+ haptics->rated_voltage = DRV260X_DEF_OD_CLAMP_VOLT;
+ haptics->rated_voltage = DRV260X_DEF_RATED_VOLT;
+
+ if (pdata) {
+ haptics->mode = pdata->mode;
+ haptics->library = pdata->library_selection;
+ if (pdata->vib_overdrive_voltage)
+ haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage);
+ if (pdata->vib_rated_voltage)
+ haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage);
+ } else if (client->dev.of_node) {
+ error = drv260x_parse_dt(&client->dev, haptics);
+ if (error)
+ return error;
+ } else {
+ dev_err(&client->dev, "Platform data not set\n");
+ return -ENODEV;
+ }
+
+
+ if (haptics->mode < DRV260X_LRA_MODE ||
+ haptics->mode > DRV260X_ERM_MODE) {
+ dev_err(&client->dev,
+ "Vibrator mode is invalid: %i\n",
+ haptics->mode);
+ return -EINVAL;
+ }
+
+ if (haptics->library < DRV260X_LIB_EMPTY ||
+ haptics->library > DRV260X_ERM_LIB_F) {
+ dev_err(&client->dev,
+ "Library value is invalid: %i\n", haptics->library);
+ return -EINVAL;
+ }
+
+ if (haptics->mode == DRV260X_LRA_MODE &&
+ haptics->library != DRV260X_LIB_EMPTY &&
+ haptics->library != DRV260X_LIB_LRA) {
+ dev_err(&client->dev,
+ "LRA Mode with ERM Library mismatch\n");
+ return -EINVAL;
+ }
+
+ if (haptics->mode == DRV260X_ERM_MODE &&
+ (haptics->library == DRV260X_LIB_EMPTY ||
+ haptics->library == DRV260X_LIB_LRA)) {
+ dev_err(&client->dev,
+ "ERM Mode with LRA Library mismatch\n");
+ return -EINVAL;
+ }
+
+ haptics->regulator = devm_regulator_get(&client->dev, "vbat");
+ if (IS_ERR(haptics->regulator)) {
+ error = PTR_ERR(haptics->regulator);
+ dev_err(&client->dev,
+ "unable to get regulator, error: %d\n", error);
+ return error;
+ }
+
+ haptics->enable_gpio = devm_gpiod_get(&client->dev, "enable");
+ if (IS_ERR(haptics->enable_gpio)) {
+ error = PTR_ERR(haptics->enable_gpio);
+ if (error != -ENOENT && error != -ENOSYS)
+ return error;
+ haptics->enable_gpio = NULL;
+ } else {
+ gpiod_direction_output(haptics->enable_gpio, 1);
+ }
+
+ haptics->input_dev = devm_input_allocate_device(&client->dev);
+ if (!haptics->input_dev) {
+ dev_err(&client->dev, "Failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ haptics->input_dev->name = "drv260x:haptics";
+ haptics->input_dev->dev.parent = client->dev.parent;
+ haptics->input_dev->close = drv260x_close;
+ input_set_drvdata(haptics->input_dev, haptics);
+ input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
+
+ error = input_ff_create_memless(haptics->input_dev, NULL,
+ drv260x_haptics_play);
+ if (error) {
+ dev_err(&client->dev, "input_ff_create() failed: %d\n",
+ error);
+ return error;
+ }
+
+ INIT_WORK(&haptics->work, drv260x_worker);
+
+ haptics->client = client;
+ i2c_set_clientdata(client, haptics);
+
+ haptics->regmap = devm_regmap_init_i2c(client, &drv260x_regmap_config);
+ if (IS_ERR(haptics->regmap)) {
+ error = PTR_ERR(haptics->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ error);
+ return error;
+ }
+
+ error = drv260x_init(haptics);
+ if (error) {
+ dev_err(&client->dev, "Device init failed: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(haptics->input_dev);
+ if (error) {
+ dev_err(&client->dev, "couldn't register input device: %d\n",
+ error);
+ return error;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int drv260x_suspend(struct device *dev)
+{
+ struct drv260x_data *haptics = dev_get_drvdata(dev);
+ int ret = 0;
+
+ mutex_lock(&haptics->input_dev->mutex);
+
+ if (haptics->input_dev->users) {
+ ret = regmap_update_bits(haptics->regmap,
+ DRV260X_MODE,
+ DRV260X_STANDBY_MASK,
+ DRV260X_STANDBY);
+ if (ret) {
+ dev_err(dev, "Failed to set standby mode\n");
+ goto out;
+ }
+
+ gpiod_set_value(haptics->enable_gpio, 0);
+
+ ret = regulator_disable(haptics->regulator);
+ if (ret) {
+ dev_err(dev, "Failed to disable regulator\n");
+ regmap_update_bits(haptics->regmap,
+ DRV260X_MODE,
+ DRV260X_STANDBY_MASK, 0);
+ }
+ }
+out:
+ mutex_unlock(&haptics->input_dev->mutex);
+ return ret;
+}
+
+static int drv260x_resume(struct device *dev)
+{
+ struct drv260x_data *haptics = dev_get_drvdata(dev);
+ int ret = 0;
+
+ mutex_lock(&haptics->input_dev->mutex);
+
+ if (haptics->input_dev->users) {
+ ret = regulator_enable(haptics->regulator);
+ if (ret) {
+ dev_err(dev, "Failed to enable regulator\n");
+ goto out;
+ }
+
+ ret = regmap_update_bits(haptics->regmap,
+ DRV260X_MODE,
+ DRV260X_STANDBY_MASK, 0);
+ if (ret) {
+ dev_err(dev, "Failed to unset standby mode\n");
+ regulator_disable(haptics->regulator);
+ goto out;
+ }
+
+ gpiod_set_value(haptics->enable_gpio, 1);
+ }
+
+out:
+ mutex_unlock(&haptics->input_dev->mutex);
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(drv260x_pm_ops, drv260x_suspend, drv260x_resume);
+
+static const struct i2c_device_id drv260x_id[] = {
+ { "drv2605l", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, drv260x_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id drv260x_of_match[] = {
+ { .compatible = "ti,drv2604", },
+ { .compatible = "ti,drv2604l", },
+ { .compatible = "ti,drv2605", },
+ { .compatible = "ti,drv2605l", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, drv260x_of_match);
+#endif
+
+static struct i2c_driver drv260x_driver = {
+ .probe = drv260x_probe,
+ .driver = {
+ .name = "drv260x-haptics",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(drv260x_of_match),
+ .pm = &drv260x_pm_ops,
+ },
+ .id_table = drv260x_id,
+};
+module_i2c_driver(drv260x_driver);
+
+MODULE_ALIAS("platform:drv260x-haptics");
+MODULE_DESCRIPTION("TI DRV260x haptics driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
diff --git a/drivers/input/misc/drv2667.c b/drivers/input/misc/drv2667.c
new file mode 100644
index 000000000000..0f437581cc04
--- /dev/null
+++ b/drivers/input/misc/drv2667.c
@@ -0,0 +1,500 @@
+/*
+ * DRV2667 haptics driver family
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * Copyright: (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+/* Contol registers */
+#define DRV2667_STATUS 0x00
+#define DRV2667_CTRL_1 0x01
+#define DRV2667_CTRL_2 0x02
+/* Waveform sequencer */
+#define DRV2667_WV_SEQ_0 0x03
+#define DRV2667_WV_SEQ_1 0x04
+#define DRV2667_WV_SEQ_2 0x05
+#define DRV2667_WV_SEQ_3 0x06
+#define DRV2667_WV_SEQ_4 0x07
+#define DRV2667_WV_SEQ_5 0x08
+#define DRV2667_WV_SEQ_6 0x09
+#define DRV2667_WV_SEQ_7 0x0A
+#define DRV2667_FIFO 0x0B
+#define DRV2667_PAGE 0xFF
+#define DRV2667_MAX_REG DRV2667_PAGE
+
+#define DRV2667_PAGE_0 0x00
+#define DRV2667_PAGE_1 0x01
+#define DRV2667_PAGE_2 0x02
+#define DRV2667_PAGE_3 0x03
+#define DRV2667_PAGE_4 0x04
+#define DRV2667_PAGE_5 0x05
+#define DRV2667_PAGE_6 0x06
+#define DRV2667_PAGE_7 0x07
+#define DRV2667_PAGE_8 0x08
+
+/* RAM fields */
+#define DRV2667_RAM_HDR_SZ 0x0
+/* RAM Header addresses */
+#define DRV2667_RAM_START_HI 0x01
+#define DRV2667_RAM_START_LO 0x02
+#define DRV2667_RAM_STOP_HI 0x03
+#define DRV2667_RAM_STOP_LO 0x04
+#define DRV2667_RAM_REPEAT_CT 0x05
+/* RAM data addresses */
+#define DRV2667_RAM_AMP 0x06
+#define DRV2667_RAM_FREQ 0x07
+#define DRV2667_RAM_DURATION 0x08
+#define DRV2667_RAM_ENVELOPE 0x09
+
+/* Control 1 Register */
+#define DRV2667_25_VPP_GAIN 0x00
+#define DRV2667_50_VPP_GAIN 0x01
+#define DRV2667_75_VPP_GAIN 0x02
+#define DRV2667_100_VPP_GAIN 0x03
+#define DRV2667_DIGITAL_IN 0xfc
+#define DRV2667_ANALOG_IN (1 << 2)
+
+/* Control 2 Register */
+#define DRV2667_GO (1 << 0)
+#define DRV2667_STANDBY (1 << 6)
+#define DRV2667_DEV_RST (1 << 7)
+
+/* RAM Envelope settings */
+#define DRV2667_NO_ENV 0x00
+#define DRV2667_32_MS_ENV 0x01
+#define DRV2667_64_MS_ENV 0x02
+#define DRV2667_96_MS_ENV 0x03
+#define DRV2667_128_MS_ENV 0x04
+#define DRV2667_160_MS_ENV 0x05
+#define DRV2667_192_MS_ENV 0x06
+#define DRV2667_224_MS_ENV 0x07
+#define DRV2667_256_MS_ENV 0x08
+#define DRV2667_512_MS_ENV 0x09
+#define DRV2667_768_MS_ENV 0x0a
+#define DRV2667_1024_MS_ENV 0x0b
+#define DRV2667_1280_MS_ENV 0x0c
+#define DRV2667_1536_MS_ENV 0x0d
+#define DRV2667_1792_MS_ENV 0x0e
+#define DRV2667_2048_MS_ENV 0x0f
+
+/**
+ * struct drv2667_data -
+ * @input_dev - Pointer to the input device
+ * @client - Pointer to the I2C client
+ * @regmap - Register map of the device
+ * @work - Work item used to off load the enable/disable of the vibration
+ * @regulator - Pointer to the regulator for the IC
+ * @magnitude - Magnitude of the vibration event
+**/
+struct drv2667_data {
+ struct input_dev *input_dev;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct work_struct work;
+ struct regulator *regulator;
+ u32 page;
+ u32 magnitude;
+ u32 frequency;
+};
+
+static struct reg_default drv2667_reg_defs[] = {
+ { DRV2667_STATUS, 0x02 },
+ { DRV2667_CTRL_1, 0x28 },
+ { DRV2667_CTRL_2, 0x40 },
+ { DRV2667_WV_SEQ_0, 0x00 },
+ { DRV2667_WV_SEQ_1, 0x00 },
+ { DRV2667_WV_SEQ_2, 0x00 },
+ { DRV2667_WV_SEQ_3, 0x00 },
+ { DRV2667_WV_SEQ_4, 0x00 },
+ { DRV2667_WV_SEQ_5, 0x00 },
+ { DRV2667_WV_SEQ_6, 0x00 },
+ { DRV2667_WV_SEQ_7, 0x00 },
+ { DRV2667_FIFO, 0x00 },
+ { DRV2667_PAGE, 0x00 },
+};
+
+static int drv2667_set_waveform_freq(struct drv2667_data *haptics)
+{
+ unsigned int read_buf;
+ int freq;
+ int error;
+
+ /* Per the data sheet:
+ * Sinusoid Frequency (Hz) = 7.8125 x Frequency
+ */
+ freq = (haptics->frequency * 1000) / 78125;
+ if (freq <= 0) {
+ dev_err(&haptics->client->dev,
+ "ERROR: Frequency calculated to %i\n", freq);
+ return -EINVAL;
+ }
+
+ error = regmap_read(haptics->regmap, DRV2667_PAGE, &read_buf);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to read the page number: %d\n", error);
+ return -EIO;
+ }
+
+ if (read_buf == DRV2667_PAGE_0 ||
+ haptics->page != read_buf) {
+ error = regmap_write(haptics->regmap,
+ DRV2667_PAGE, haptics->page);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to set the page: %d\n", error);
+ return -EIO;
+ }
+ }
+
+ error = regmap_write(haptics->regmap, DRV2667_RAM_FREQ, freq);
+ if (error)
+ dev_err(&haptics->client->dev,
+ "Failed to set the frequency: %d\n", error);
+
+ /* Reset back to original page */
+ if (read_buf == DRV2667_PAGE_0 ||
+ haptics->page != read_buf) {
+ error = regmap_write(haptics->regmap, DRV2667_PAGE, read_buf);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to set the page: %d\n", error);
+ return -EIO;
+ }
+ }
+
+ return error;
+}
+
+static void drv2667_worker(struct work_struct *work)
+{
+ struct drv2667_data *haptics = container_of(work, struct drv2667_data, work);
+ int error;
+
+ if (haptics->magnitude) {
+ error = regmap_write(haptics->regmap,
+ DRV2667_PAGE, haptics->page);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to set the page: %d\n", error);
+ return;
+ }
+
+ error = regmap_write(haptics->regmap, DRV2667_RAM_AMP,
+ haptics->magnitude);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to set the amplitude: %d\n", error);
+ return;
+ }
+
+ error = regmap_write(haptics->regmap,
+ DRV2667_PAGE, DRV2667_PAGE_0);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to set the page: %d\n", error);
+ return;
+ }
+
+ error = regmap_write(haptics->regmap,
+ DRV2667_CTRL_2, DRV2667_GO);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to set the GO bit: %d\n", error);
+ }
+ } else {
+ error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
+ DRV2667_GO, 0);
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to unset the GO bit: %d\n", error);
+ }
+ }
+}
+
+static int drv2667_haptics_play(struct input_dev *input, void *data,
+ struct ff_effect *effect)
+{
+ struct drv2667_data *haptics = input_get_drvdata(input);
+
+ if (effect->u.rumble.strong_magnitude > 0)
+ haptics->magnitude = effect->u.rumble.strong_magnitude;
+ else if (effect->u.rumble.weak_magnitude > 0)
+ haptics->magnitude = effect->u.rumble.weak_magnitude;
+ else
+ haptics->magnitude = 0;
+
+ schedule_work(&haptics->work);
+
+ return 0;
+}
+
+static void drv2667_close(struct input_dev *input)
+{
+ struct drv2667_data *haptics = input_get_drvdata(input);
+ int error;
+
+ cancel_work_sync(&haptics->work);
+
+ error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
+ DRV2667_STANDBY, 1);
+ if (error)
+ dev_err(&haptics->client->dev,
+ "Failed to enter standby mode: %d\n", error);
+}
+
+static const struct reg_default drv2667_init_regs[] = {
+ { DRV2667_CTRL_2, 0 },
+ { DRV2667_CTRL_1, DRV2667_25_VPP_GAIN },
+ { DRV2667_WV_SEQ_0, 1 },
+ { DRV2667_WV_SEQ_1, 0 }
+};
+
+static const struct reg_default drv2667_page1_init[] = {
+ { DRV2667_RAM_HDR_SZ, 0x05 },
+ { DRV2667_RAM_START_HI, 0x80 },
+ { DRV2667_RAM_START_LO, 0x06 },
+ { DRV2667_RAM_STOP_HI, 0x00 },
+ { DRV2667_RAM_STOP_LO, 0x09 },
+ { DRV2667_RAM_REPEAT_CT, 0 },
+ { DRV2667_RAM_DURATION, 0x05 },
+ { DRV2667_RAM_ENVELOPE, DRV2667_NO_ENV },
+ { DRV2667_RAM_AMP, 0x60 },
+};
+
+static int drv2667_init(struct drv2667_data *haptics)
+{
+ int error;
+
+ /* Set default haptic frequency to 195Hz on Page 1*/
+ haptics->frequency = 195;
+ haptics->page = DRV2667_PAGE_1;
+
+ error = regmap_register_patch(haptics->regmap,
+ drv2667_init_regs,
+ ARRAY_SIZE(drv2667_init_regs));
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write init registers: %d\n",
+ error);
+ return error;
+ }
+
+ error = regmap_write(haptics->regmap, DRV2667_PAGE, haptics->page);
+ if (error) {
+ dev_err(&haptics->client->dev, "Failed to set page: %d\n",
+ error);
+ goto error_out;
+ }
+
+ error = drv2667_set_waveform_freq(haptics);
+ if (error)
+ goto error_page;
+
+ error = regmap_register_patch(haptics->regmap,
+ drv2667_page1_init,
+ ARRAY_SIZE(drv2667_page1_init));
+ if (error) {
+ dev_err(&haptics->client->dev,
+ "Failed to write page registers: %d\n",
+ error);
+ return error;
+ }
+
+ error = regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
+ return error;
+
+error_page:
+ regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
+error_out:
+ return error;
+}
+
+static const struct regmap_config drv2667_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = DRV2667_MAX_REG,
+ .reg_defaults = drv2667_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(drv2667_reg_defs),
+ .cache_type = REGCACHE_NONE,
+};
+
+static int drv2667_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct drv2667_data *haptics;
+ int error;
+
+ haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
+ if (!haptics)
+ return -ENOMEM;
+
+ haptics->regulator = devm_regulator_get(&client->dev, "vbat");
+ if (IS_ERR(haptics->regulator)) {
+ error = PTR_ERR(haptics->regulator);
+ dev_err(&client->dev,
+ "unable to get regulator, error: %d\n", error);
+ return error;
+ }
+
+ haptics->input_dev = devm_input_allocate_device(&client->dev);
+ if (!haptics->input_dev) {
+ dev_err(&client->dev, "Failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ haptics->input_dev->name = "drv2667:haptics";
+ haptics->input_dev->dev.parent = client->dev.parent;
+ haptics->input_dev->close = drv2667_close;
+ input_set_drvdata(haptics->input_dev, haptics);
+ input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
+
+ error = input_ff_create_memless(haptics->input_dev, NULL,
+ drv2667_haptics_play);
+ if (error) {
+ dev_err(&client->dev, "input_ff_create() failed: %d\n",
+ error);
+ return error;
+ }
+
+ INIT_WORK(&haptics->work, drv2667_worker);
+
+ haptics->client = client;
+ i2c_set_clientdata(client, haptics);
+
+ haptics->regmap = devm_regmap_init_i2c(client, &drv2667_regmap_config);
+ if (IS_ERR(haptics->regmap)) {
+ error = PTR_ERR(haptics->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ error);
+ return error;
+ }
+
+ error = drv2667_init(haptics);
+ if (error) {
+ dev_err(&client->dev, "Device init failed: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(haptics->input_dev);
+ if (error) {
+ dev_err(&client->dev, "couldn't register input device: %d\n",
+ error);
+ return error;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int drv2667_suspend(struct device *dev)
+{
+ struct drv2667_data *haptics = dev_get_drvdata(dev);
+ int ret = 0;
+
+ mutex_lock(&haptics->input_dev->mutex);
+
+ if (haptics->input_dev->users) {
+ ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
+ DRV2667_STANDBY, 1);
+ if (ret) {
+ dev_err(dev, "Failed to set standby mode\n");
+ regulator_disable(haptics->regulator);
+ goto out;
+ }
+
+ ret = regulator_disable(haptics->regulator);
+ if (ret) {
+ dev_err(dev, "Failed to disable regulator\n");
+ regmap_update_bits(haptics->regmap,
+ DRV2667_CTRL_2,
+ DRV2667_STANDBY, 0);
+ }
+ }
+out:
+ mutex_unlock(&haptics->input_dev->mutex);
+ return ret;
+}
+
+static int drv2667_resume(struct device *dev)
+{
+ struct drv2667_data *haptics = dev_get_drvdata(dev);
+ int ret = 0;
+
+ mutex_lock(&haptics->input_dev->mutex);
+
+ if (haptics->input_dev->users) {
+ ret = regulator_enable(haptics->regulator);
+ if (ret) {
+ dev_err(dev, "Failed to enable regulator\n");
+ goto out;
+ }
+
+ ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
+ DRV2667_STANDBY, 0);
+ if (ret) {
+ dev_err(dev, "Failed to unset standby mode\n");
+ regulator_disable(haptics->regulator);
+ goto out;
+ }
+
+ }
+
+out:
+ mutex_unlock(&haptics->input_dev->mutex);
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(drv2667_pm_ops, drv2667_suspend, drv2667_resume);
+
+static const struct i2c_device_id drv2667_id[] = {
+ { "drv2667", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, drv2667_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id drv2667_of_match[] = {
+ { .compatible = "ti,drv2667", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, drv2667_of_match);
+#endif
+
+static struct i2c_driver drv2667_driver = {
+ .probe = drv2667_probe,
+ .driver = {
+ .name = "drv2667-haptics",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(drv2667_of_match),
+ .pm = &drv2667_pm_ops,
+ },
+ .id_table = drv2667_id,
+};
+module_i2c_driver(drv2667_driver);
+
+MODULE_ALIAS("platform:drv2667-haptics");
+MODULE_DESCRIPTION("TI DRV2667 haptics driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c
new file mode 100644
index 000000000000..d605db4d2f39
--- /dev/null
+++ b/drivers/input/misc/max77693-haptic.c
@@ -0,0 +1,357 @@
+/*
+ * MAXIM MAX77693 Haptic device driver
+ *
+ * Copyright (C) 2014 Samsung Electronics
+ * Jaewon Kim <jaewon02.kim@samsung.com>
+ *
+ * This program is not provided / owned by Maxim Integrated Products.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-private.h>
+
+#define MAX_MAGNITUDE_SHIFT 16
+
+enum max77693_haptic_motor_type {
+ MAX77693_HAPTIC_ERM = 0,
+ MAX77693_HAPTIC_LRA,
+};
+
+enum max77693_haptic_pulse_mode {
+ MAX77693_HAPTIC_EXTERNAL_MODE = 0,
+ MAX77693_HAPTIC_INTERNAL_MODE,
+};
+
+enum max77693_haptic_pwm_divisor {
+ MAX77693_HAPTIC_PWM_DIVISOR_32 = 0,
+ MAX77693_HAPTIC_PWM_DIVISOR_64,
+ MAX77693_HAPTIC_PWM_DIVISOR_128,
+ MAX77693_HAPTIC_PWM_DIVISOR_256,
+};
+
+struct max77693_haptic {
+ struct regmap *regmap_pmic;
+ struct regmap *regmap_haptic;
+ struct device *dev;
+ struct input_dev *input_dev;
+ struct pwm_device *pwm_dev;
+ struct regulator *motor_reg;
+
+ bool enabled;
+ bool suspend_state;
+ unsigned int magnitude;
+ unsigned int pwm_duty;
+ enum max77693_haptic_motor_type type;
+ enum max77693_haptic_pulse_mode mode;
+ enum max77693_haptic_pwm_divisor pwm_divisor;
+
+ struct work_struct work;
+};
+
+static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic)
+{
+ int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
+ int error;
+
+ error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
+ if (error) {
+ dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int max77693_haptic_configure(struct max77693_haptic *haptic,
+ bool enable)
+{
+ unsigned int value;
+ int error;
+
+ value = ((haptic->type << MAX77693_CONFIG2_MODE) |
+ (enable << MAX77693_CONFIG2_MEN) |
+ (haptic->mode << MAX77693_CONFIG2_HTYP) |
+ (haptic->pwm_divisor));
+
+ error = regmap_write(haptic->regmap_haptic,
+ MAX77693_HAPTIC_REG_CONFIG2, value);
+ if (error) {
+ dev_err(haptic->dev,
+ "failed to update haptic config: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int max77693_haptic_lowsys(struct max77693_haptic *haptic, bool enable)
+{
+ int error;
+
+ error = regmap_update_bits(haptic->regmap_pmic,
+ MAX77693_PMIC_REG_LSCNFG,
+ MAX77693_PMIC_LOW_SYS_MASK,
+ enable << MAX77693_PMIC_LOW_SYS_SHIFT);
+ if (error) {
+ dev_err(haptic->dev, "cannot update pmic regmap: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static void max77693_haptic_enable(struct max77693_haptic *haptic)
+{
+ int error;
+
+ if (haptic->enabled)
+ return;
+
+ error = pwm_enable(haptic->pwm_dev);
+ if (error) {
+ dev_err(haptic->dev,
+ "failed to enable haptic pwm device: %d\n", error);
+ return;
+ }
+
+ error = max77693_haptic_lowsys(haptic, true);
+ if (error)
+ goto err_enable_lowsys;
+
+ error = max77693_haptic_configure(haptic, true);
+ if (error)
+ goto err_enable_config;
+
+ haptic->enabled = true;
+
+ return;
+
+err_enable_config:
+ max77693_haptic_lowsys(haptic, false);
+err_enable_lowsys:
+ pwm_disable(haptic->pwm_dev);
+}
+
+static void max77693_haptic_disable(struct max77693_haptic *haptic)
+{
+ int error;
+
+ if (haptic->enabled)
+ return;
+
+ error = max77693_haptic_configure(haptic, false);
+ if (error)
+ return;
+
+ error = max77693_haptic_lowsys(haptic, false);
+ if (error)
+ goto err_disable_lowsys;
+
+ pwm_disable(haptic->pwm_dev);
+ haptic->enabled = false;
+
+ return;
+
+err_disable_lowsys:
+ max77693_haptic_configure(haptic, true);
+}
+
+static void max77693_haptic_play_work(struct work_struct *work)
+{
+ struct max77693_haptic *haptic =
+ container_of(work, struct max77693_haptic, work);
+ int error;
+
+ error = max77693_haptic_set_duty_cycle(haptic);
+ if (error) {
+ dev_err(haptic->dev, "failed to set duty cycle: %d\n", error);
+ return;
+ }
+
+ if (haptic->magnitude)
+ max77693_haptic_enable(haptic);
+ else
+ max77693_haptic_disable(haptic);
+}
+
+static int max77693_haptic_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct max77693_haptic *haptic = input_get_drvdata(dev);
+ uint64_t period_mag_multi;
+
+ haptic->magnitude = effect->u.rumble.strong_magnitude;
+ if (!haptic->magnitude)
+ haptic->magnitude = effect->u.rumble.weak_magnitude;
+
+ /*
+ * The magnitude comes from force-feedback interface.
+ * The formula to convert magnitude to pwm_duty as follows:
+ * - pwm_duty = (magnitude * pwm_period) / MAX_MAGNITUDE(0xFFFF)
+ */
+ period_mag_multi = (int64_t)(haptic->pwm_dev->period *
+ haptic->magnitude);
+ haptic->pwm_duty = (unsigned int)(period_mag_multi >>
+ MAX_MAGNITUDE_SHIFT);
+
+ schedule_work(&haptic->work);
+
+ return 0;
+}
+
+static int max77693_haptic_open(struct input_dev *dev)
+{
+ struct max77693_haptic *haptic = input_get_drvdata(dev);
+ int error;
+
+ error = regulator_enable(haptic->motor_reg);
+ if (error) {
+ dev_err(haptic->dev,
+ "failed to enable regulator: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static void max77693_haptic_close(struct input_dev *dev)
+{
+ struct max77693_haptic *haptic = input_get_drvdata(dev);
+ int error;
+
+ cancel_work_sync(&haptic->work);
+ max77693_haptic_disable(haptic);
+
+ error = regulator_disable(haptic->motor_reg);
+ if (error)
+ dev_err(haptic->dev,
+ "failed to disable regulator: %d\n", error);
+}
+
+static int max77693_haptic_probe(struct platform_device *pdev)
+{
+ struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
+ struct max77693_haptic *haptic;
+ int error;
+
+ haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL);
+ if (!haptic)
+ return -ENOMEM;
+
+ haptic->regmap_pmic = max77693->regmap;
+ haptic->regmap_haptic = max77693->regmap_haptic;
+ haptic->dev = &pdev->dev;
+ haptic->type = MAX77693_HAPTIC_LRA;
+ haptic->mode = MAX77693_HAPTIC_EXTERNAL_MODE;
+ haptic->pwm_divisor = MAX77693_HAPTIC_PWM_DIVISOR_128;
+ haptic->suspend_state = false;
+
+ INIT_WORK(&haptic->work, max77693_haptic_play_work);
+
+ /* Get pwm and regulatot for haptic device */
+ haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL);
+ if (IS_ERR(haptic->pwm_dev)) {
+ dev_err(&pdev->dev, "failed to get pwm device\n");
+ return PTR_ERR(haptic->pwm_dev);
+ }
+
+ haptic->motor_reg = devm_regulator_get(&pdev->dev, "haptic");
+ if (IS_ERR(haptic->motor_reg)) {
+ dev_err(&pdev->dev, "failed to get regulator\n");
+ return PTR_ERR(haptic->motor_reg);
+ }
+
+ /* Initialize input device for haptic device */
+ haptic->input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!haptic->input_dev) {
+ dev_err(&pdev->dev, "failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ haptic->input_dev->name = "max77693-haptic";
+ haptic->input_dev->id.version = 1;
+ haptic->input_dev->dev.parent = &pdev->dev;
+ haptic->input_dev->open = max77693_haptic_open;
+ haptic->input_dev->close = max77693_haptic_close;
+ input_set_drvdata(haptic->input_dev, haptic);
+ input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE);
+
+ error = input_ff_create_memless(haptic->input_dev, NULL,
+ max77693_haptic_play_effect);
+ if (error) {
+ dev_err(&pdev->dev, "failed to create force-feedback\n");
+ return error;
+ }
+
+ error = input_register_device(haptic->input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ return error;
+ }
+
+ platform_set_drvdata(pdev, haptic);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max77693_haptic_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct max77693_haptic *haptic = platform_get_drvdata(pdev);
+
+ if (haptic->enabled) {
+ max77693_haptic_disable(haptic);
+ haptic->suspend_state = true;
+ }
+
+ return 0;
+}
+
+static int max77693_haptic_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct max77693_haptic *haptic = platform_get_drvdata(pdev);
+
+ if (haptic->suspend_state) {
+ max77693_haptic_enable(haptic);
+ haptic->suspend_state = false;
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
+ max77693_haptic_suspend, max77693_haptic_resume);
+
+static struct platform_driver max77693_haptic_driver = {
+ .driver = {
+ .name = "max77693-haptic",
+ .owner = THIS_MODULE,
+ .pm = &max77693_haptic_pm_ops,
+ },
+ .probe = max77693_haptic_probe,
+};
+module_platform_driver(max77693_haptic_driver);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_DESCRIPTION("MAXIM MAX77693 Haptic driver");
+MODULE_ALIAS("platform:max77693-haptic");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/palmas-pwrbutton.c b/drivers/input/misc/palmas-pwrbutton.c
new file mode 100644
index 000000000000..f505ac3a8d87
--- /dev/null
+++ b/drivers/input/misc/palmas-pwrbutton.c
@@ -0,0 +1,332 @@
+/*
+ * Texas Instruments' Palmas Power Button Input Driver
+ *
+ * Copyright (C) 2012-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Girish S Ghongdemath
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/palmas.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define PALMAS_LPK_TIME_MASK 0x0c
+#define PALMAS_PWRON_DEBOUNCE_MASK 0x03
+#define PALMAS_PWR_KEY_Q_TIME_MS 20
+
+/**
+ * struct palmas_pwron - Palmas power on data
+ * @palmas: pointer to palmas device
+ * @input_dev: pointer to input device
+ * @input_work: work for detecting release of key
+ * @irq: irq that we are hooked on to
+ */
+struct palmas_pwron {
+ struct palmas *palmas;
+ struct input_dev *input_dev;
+ struct delayed_work input_work;
+ int irq;
+};
+
+/**
+ * struct palmas_pwron_config - configuration of palmas power on
+ * @long_press_time_val: value for long press h/w shutdown event
+ * @pwron_debounce_val: value for debounce of power button
+ */
+struct palmas_pwron_config {
+ u8 long_press_time_val;
+ u8 pwron_debounce_val;
+};
+
+/**
+ * palmas_power_button_work() - Detects the button release event
+ * @work: work item to detect button release
+ */
+static void palmas_power_button_work(struct work_struct *work)
+{
+ struct palmas_pwron *pwron = container_of(work,
+ struct palmas_pwron,
+ input_work.work);
+ struct input_dev *input_dev = pwron->input_dev;
+ unsigned int reg;
+ int error;
+
+ error = palmas_read(pwron->palmas, PALMAS_INTERRUPT_BASE,
+ PALMAS_INT1_LINE_STATE, &reg);
+ if (error) {
+ dev_err(input_dev->dev.parent,
+ "Cannot read palmas PWRON status: %d\n", error);
+ } else if (reg & BIT(1)) {
+ /* The button is released, report event. */
+ input_report_key(input_dev, KEY_POWER, 0);
+ input_sync(input_dev);
+ } else {
+ /* The button is still depressed, keep checking. */
+ schedule_delayed_work(&pwron->input_work,
+ msecs_to_jiffies(PALMAS_PWR_KEY_Q_TIME_MS));
+ }
+}
+
+/**
+ * pwron_irq() - button press isr
+ * @irq: irq
+ * @palmas_pwron: pwron struct
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t pwron_irq(int irq, void *palmas_pwron)
+{
+ struct palmas_pwron *pwron = palmas_pwron;
+ struct input_dev *input_dev = pwron->input_dev;
+
+ input_report_key(input_dev, KEY_POWER, 1);
+ pm_wakeup_event(input_dev->dev.parent, 0);
+ input_sync(input_dev);
+
+ mod_delayed_work(system_wq, &pwron->input_work,
+ msecs_to_jiffies(PALMAS_PWR_KEY_Q_TIME_MS));
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * palmas_pwron_params_ofinit() - device tree parameter parser
+ * @dev: palmas button device
+ * @config: configuration params that this fills up
+ */
+static void palmas_pwron_params_ofinit(struct device *dev,
+ struct palmas_pwron_config *config)
+{
+ struct device_node *np;
+ u32 val;
+ int i, error;
+ u8 lpk_times[] = { 6, 8, 10, 12 };
+ int pwr_on_deb_ms[] = { 15, 100, 500, 1000 };
+
+ memset(config, 0, sizeof(*config));
+
+ /* Default config parameters */
+ config->long_press_time_val = ARRAY_SIZE(lpk_times) - 1;
+
+ np = dev->of_node;
+ if (!np)
+ return;
+
+ error = of_property_read_u32(np, "ti,palmas-long-press-seconds", &val);
+ if (!error) {
+ for (i = 0; i < ARRAY_SIZE(lpk_times); i++) {
+ if (val <= lpk_times[i]) {
+ config->long_press_time_val = i;
+ break;
+ }
+ }
+ }
+
+ error = of_property_read_u32(np,
+ "ti,palmas-pwron-debounce-milli-seconds",
+ &val);
+ if (!error) {
+ for (i = 0; i < ARRAY_SIZE(pwr_on_deb_ms); i++) {
+ if (val <= pwr_on_deb_ms[i]) {
+ config->pwron_debounce_val = i;
+ break;
+ }
+ }
+ }
+
+ dev_info(dev, "h/w controlled shutdown duration=%d seconds\n",
+ lpk_times[config->long_press_time_val]);
+}
+
+/**
+ * palmas_pwron_probe() - probe
+ * @pdev: platform device for the button
+ *
+ * Return: 0 for successful probe else appropriate error
+ */
+static int palmas_pwron_probe(struct platform_device *pdev)
+{
+ struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct input_dev *input_dev;
+ struct palmas_pwron *pwron;
+ struct palmas_pwron_config config;
+ int val;
+ int error;
+
+ palmas_pwron_params_ofinit(dev, &config);
+
+ pwron = kzalloc(sizeof(*pwron), GFP_KERNEL);
+ if (!pwron)
+ return -ENOMEM;
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(dev, "Can't allocate power button\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ input_dev->name = "palmas_pwron";
+ input_dev->phys = "palmas_pwron/input0";
+ input_dev->dev.parent = dev;
+
+ input_set_capability(input_dev, EV_KEY, KEY_POWER);
+
+ /*
+ * Setup default hardware shutdown option (long key press)
+ * and debounce.
+ */
+ val = config.long_press_time_val << __ffs(PALMAS_LPK_TIME_MASK);
+ val |= config.pwron_debounce_val << __ffs(PALMAS_PWRON_DEBOUNCE_MASK);
+ error = palmas_update_bits(palmas, PALMAS_PMU_CONTROL_BASE,
+ PALMAS_LONG_PRESS_KEY,
+ PALMAS_LPK_TIME_MASK |
+ PALMAS_PWRON_DEBOUNCE_MASK,
+ val);
+ if (error) {
+ dev_err(dev, "LONG_PRESS_KEY_UPDATE failed: %d\n", error);
+ goto err_free_input;
+ }
+
+ pwron->palmas = palmas;
+ pwron->input_dev = input_dev;
+
+ INIT_DELAYED_WORK(&pwron->input_work, palmas_power_button_work);
+
+ pwron->irq = platform_get_irq(pdev, 0);
+ error = request_threaded_irq(pwron->irq, NULL, pwron_irq,
+ IRQF_TRIGGER_HIGH |
+ IRQF_TRIGGER_LOW |
+ IRQF_ONESHOT,
+ dev_name(dev), pwron);
+ if (error) {
+ dev_err(dev, "Can't get IRQ for pwron: %d\n", error);
+ goto err_free_input;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(dev, "Can't register power button: %d\n", error);
+ goto err_free_irq;
+ }
+
+ platform_set_drvdata(pdev, pwron);
+ device_init_wakeup(dev, true);
+
+ return 0;
+
+err_free_irq:
+ cancel_delayed_work_sync(&pwron->input_work);
+ free_irq(pwron->irq, pwron);
+err_free_input:
+ input_free_device(input_dev);
+err_free_mem:
+ kfree(pwron);
+ return error;
+}
+
+/**
+ * palmas_pwron_remove() - Cleanup on removal
+ * @pdev: platform device for the button
+ *
+ * Return: 0
+ */
+static int palmas_pwron_remove(struct platform_device *pdev)
+{
+ struct palmas_pwron *pwron = platform_get_drvdata(pdev);
+
+ free_irq(pwron->irq, pwron);
+ cancel_delayed_work_sync(&pwron->input_work);
+
+ input_unregister_device(pwron->input_dev);
+ kfree(pwron);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * palmas_pwron_suspend() - suspend handler
+ * @dev: power button device
+ *
+ * Cancel all pending work items for the power button, setup irq for wakeup
+ *
+ * Return: 0
+ */
+static int palmas_pwron_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct palmas_pwron *pwron = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&pwron->input_work);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(pwron->irq);
+
+ return 0;
+}
+
+/**
+ * palmas_pwron_resume() - resume handler
+ * @dev: power button device
+ *
+ * Just disable the wakeup capability of irq here.
+ *
+ * Return: 0
+ */
+static int palmas_pwron_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct palmas_pwron *pwron = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(pwron->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(palmas_pwron_pm,
+ palmas_pwron_suspend, palmas_pwron_resume);
+
+#ifdef CONFIG_OF
+static struct of_device_id of_palmas_pwr_match[] = {
+ { .compatible = "ti,palmas-pwrbutton" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, of_palmas_pwr_match);
+#endif
+
+static struct platform_driver palmas_pwron_driver = {
+ .probe = palmas_pwron_probe,
+ .remove = palmas_pwron_remove,
+ .driver = {
+ .name = "palmas_pwrbutton",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(of_palmas_pwr_match),
+ .pm = &palmas_pwron_pm,
+ },
+};
+module_platform_driver(palmas_pwron_driver);
+
+MODULE_ALIAS("platform:palmas-pwrbutton");
+MODULE_DESCRIPTION("Palmas Power Button");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Texas Instruments Inc.");
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index e34dfc29beb3..735604753568 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -18,7 +18,7 @@
#include <linux/gpio/consumer.h>
#include <linux/gpio_keys.h>
#include <linux/platform_device.h>
-#include <linux/pnp.h>
+#include <linux/acpi.h>
/*
* Definition of buttons on the tablet. The ACPI index of each button
@@ -67,7 +67,7 @@ static int soc_button_lookup_gpio(struct device *dev, int acpi_index)
}
static struct platform_device *
-soc_button_device_create(struct pnp_dev *pdev,
+soc_button_device_create(struct platform_device *pdev,
const struct soc_button_info *button_info,
bool autorepeat)
{
@@ -138,30 +138,40 @@ err_free_mem:
return ERR_PTR(error);
}
-static void soc_button_remove(struct pnp_dev *pdev)
+static int soc_button_remove(struct platform_device *pdev)
{
- struct soc_button_data *priv = pnp_get_drvdata(pdev);
+ struct soc_button_data *priv = platform_get_drvdata(pdev);
+
int i;
for (i = 0; i < BUTTON_TYPES; i++)
if (priv->children[i])
platform_device_unregister(priv->children[i]);
+
+ return 0;
}
-static int soc_button_pnp_probe(struct pnp_dev *pdev,
- const struct pnp_device_id *id)
+static int soc_button_probe(struct platform_device *pdev)
{
- const struct soc_button_info *button_info = (void *)id->driver_data;
+ struct device *dev = &pdev->dev;
+ const struct acpi_device_id *id;
+ struct soc_button_info *button_info;
struct soc_button_data *priv;
struct platform_device *pd;
int i;
int error;
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return -ENODEV;
+
+ button_info = (struct soc_button_info *)id->driver_data;
+
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- pnp_set_drvdata(pdev, priv);
+ platform_set_drvdata(pdev, priv);
for (i = 0; i < BUTTON_TYPES; i++) {
pd = soc_button_device_create(pdev, button_info, i == 0);
@@ -192,30 +202,22 @@ static struct soc_button_info soc_button_PNP0C40[] = {
{ }
};
-static const struct pnp_device_id soc_button_pnp_match[] = {
- { .id = "PNP0C40", .driver_data = (long)soc_button_PNP0C40 },
- { .id = "" }
+static const struct acpi_device_id soc_button_acpi_match[] = {
+ { "PNP0C40", (unsigned long)soc_button_PNP0C40 },
+ { }
};
-MODULE_DEVICE_TABLE(pnp, soc_button_pnp_match);
-static struct pnp_driver soc_button_pnp_driver = {
- .name = KBUILD_MODNAME,
- .id_table = soc_button_pnp_match,
- .probe = soc_button_pnp_probe,
+MODULE_DEVICE_TABLE(acpi, soc_button_acpi_match);
+
+static struct platform_driver soc_button_driver = {
+ .probe = soc_button_probe,
.remove = soc_button_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .acpi_match_table = ACPI_PTR(soc_button_acpi_match),
+ },
};
-
-static int __init soc_button_init(void)
-{
- return pnp_register_driver(&soc_button_pnp_driver);
-}
-
-static void __exit soc_button_exit(void)
-{
- pnp_unregister_driver(&soc_button_pnp_driver);
-}
-
-module_init(soc_button_init);
-module_exit(soc_button_exit);
+module_platform_driver(soc_button_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index c25efdb3f288..dda507f8b3a2 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_MOUSE_SYNAPTICS_I2C) += synaptics_i2c.o
obj-$(CONFIG_MOUSE_SYNAPTICS_USB) += synaptics_usb.o
obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
-psmouse-objs := psmouse-base.o synaptics.o
+psmouse-objs := psmouse-base.o synaptics.o focaltech.o
psmouse-$(CONFIG_MOUSE_PS2_ALPS) += alps.o
psmouse-$(CONFIG_MOUSE_PS2_ELANTECH) += elantech.o
diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c
new file mode 100644
index 000000000000..f4d657ee1cc0
--- /dev/null
+++ b/drivers/input/mouse/focaltech.c
@@ -0,0 +1,52 @@
+/*
+ * Focaltech TouchPad PS/2 mouse driver
+ *
+ * Copyright (c) 2014 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Red Hat authors:
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+/*
+ * The Focaltech PS/2 touchpad protocol is unknown. This drivers deals with
+ * detection only, to avoid further detection attempts confusing the touchpad
+ * this way it at least works in PS/2 mouse compatibility mode.
+ */
+
+#include <linux/device.h>
+#include <linux/libps2.h>
+#include "psmouse.h"
+
+static const char * const focaltech_pnp_ids[] = {
+ "FLT0101",
+ "FLT0102",
+ "FLT0103",
+ NULL
+};
+
+int focaltech_detect(struct psmouse *psmouse, bool set_properties)
+{
+ if (!psmouse_matches_pnp_id(psmouse, focaltech_pnp_ids))
+ return -ENODEV;
+
+ if (set_properties) {
+ psmouse->vendor = "FocalTech";
+ psmouse->name = "FocalTech Touchpad in mouse emulation mode";
+ }
+
+ return 0;
+}
+
+int focaltech_init(struct psmouse *psmouse)
+{
+ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
+ psmouse_reset(psmouse);
+
+ return 0;
+}
diff --git a/drivers/input/mouse/focaltech.h b/drivers/input/mouse/focaltech.h
new file mode 100644
index 000000000000..498650c61e28
--- /dev/null
+++ b/drivers/input/mouse/focaltech.h
@@ -0,0 +1,22 @@
+/*
+ * Focaltech TouchPad PS/2 mouse driver
+ *
+ * Copyright (c) 2014 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Red Hat authors:
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _FOCALTECH_H
+#define _FOCALTECH_H
+
+int focaltech_detect(struct psmouse *psmouse, bool set_properties);
+int focaltech_init(struct psmouse *psmouse);
+
+#endif
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index b4e1f014ddc2..26994f6a2b2a 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -35,6 +35,7 @@
#include "elantech.h"
#include "sentelic.h"
#include "cypress_ps2.h"
+#include "focaltech.h"
#define DRIVER_DESC "PS/2 mouse driver"
@@ -462,6 +463,20 @@ static int psmouse_poll(struct psmouse *psmouse)
PSMOUSE_CMD_POLL | (psmouse->pktsize << 8));
}
+/*
+ * psmouse_matches_pnp_id - check if psmouse matches one of the passed in ids.
+ */
+bool psmouse_matches_pnp_id(struct psmouse *psmouse, const char * const ids[])
+{
+ int i;
+
+ if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4))
+ for (i = 0; ids[i]; i++)
+ if (strstr(psmouse->ps2dev.serio->firmware_id, ids[i]))
+ return true;
+
+ return false;
+}
/*
* Genius NetMouse magic init.
@@ -708,6 +723,21 @@ static int psmouse_extensions(struct psmouse *psmouse,
{
bool synaptics_hardware = false;
+/* Always check for focaltech, this is safe as it uses pnp-id matching */
+ if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) {
+ if (!set_properties || focaltech_init(psmouse) == 0) {
+ /*
+ * Not supported yet, use bare protocol.
+ * Note that we need to also restrict
+ * psmouse_max_proto so that psmouse_initialize()
+ * does not try to reset rate and resolution,
+ * because even that upsets the device.
+ */
+ psmouse_max_proto = PSMOUSE_PS2;
+ return PSMOUSE_PS2;
+ }
+ }
+
/*
* We always check for lifebook because it does not disturb mouse
* (it only checks DMI information).
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 2f0b39d59a9b..f4cf664c7db3 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -108,6 +108,7 @@ void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse);
int psmouse_activate(struct psmouse *psmouse);
int psmouse_deactivate(struct psmouse *psmouse);
+bool psmouse_matches_pnp_id(struct psmouse *psmouse, const char * const ids[]);
struct psmouse_attribute {
struct device_attribute dattr;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index fd23181c1fb7..6394d9b5bfd3 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -185,18 +185,6 @@ static const char * const topbuttonpad_pnp_ids[] = {
NULL
};
-static bool matches_pnp_id(struct psmouse *psmouse, const char * const ids[])
-{
- int i;
-
- if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4))
- for (i = 0; ids[i]; i++)
- if (strstr(psmouse->ps2dev.serio->firmware_id, ids[i]))
- return true;
-
- return false;
-}
-
/*****************************************************************************
* Synaptics communications functions
****************************************************************************/
@@ -362,7 +350,8 @@ static int synaptics_resolution(struct psmouse *psmouse)
}
for (i = 0; min_max_pnpid_table[i].pnp_ids; i++) {
- if (matches_pnp_id(psmouse, min_max_pnpid_table[i].pnp_ids)) {
+ if (psmouse_matches_pnp_id(psmouse,
+ min_max_pnpid_table[i].pnp_ids)) {
priv->x_min = min_max_pnpid_table[i].x_min;
priv->x_max = min_max_pnpid_table[i].x_max;
priv->y_min = min_max_pnpid_table[i].y_min;
@@ -1492,7 +1481,7 @@ static void set_input_params(struct psmouse *psmouse,
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
- if (matches_pnp_id(psmouse, topbuttonpad_pnp_ids))
+ if (psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids))
__set_bit(INPUT_PROP_TOPBUTTONPAD, dev->propbit);
/* Clickpads report only left button */
__clear_bit(BTN_RIGHT, dev->keybit);