diff options
Diffstat (limited to 'drivers')
31 files changed, 144 insertions, 60 deletions
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 104c04385bb9..fbc5b9b44749 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -31,7 +31,9 @@ static struct usb_driver airprime_driver = { }; static struct usb_serial_driver airprime_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 6d84de40cb7b..4878961a0900 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -122,7 +122,9 @@ static struct usb_driver belkin_driver = { /* All of the device info needed for the serial converters */ static struct usb_serial_driver belkin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Belkin / Peracom / GoHubs USB Serial Adapter", .short_name = "belkin", .id_table = id_table_combined, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 5a0bcd34bb6d..b8364a8de7df 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -57,13 +57,13 @@ static int usb_serial_device_probe (struct device *dev) driver = port->serial->type; if (driver->port_probe) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_probe (port); - module_put(driver->owner); + module_put(driver->driver.owner); if (retval) goto exit; } @@ -92,13 +92,13 @@ static int usb_serial_device_remove (struct device *dev) driver = port->serial->type; if (driver->port_remove) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_remove (port); - module_put(driver->owner); + module_put(driver->driver.owner); } exit: minor = port->number; @@ -120,7 +120,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; - driver->driver.owner = driver->owner; retval = driver_register(&driver->driver); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 0b45b58bef5f..81dd720a122b 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -74,7 +74,9 @@ static struct usb_driver cp2101_driver = { }; static struct usb_serial_driver cp2101_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 9f421a3c47e8..3441bad74f7b 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -84,7 +84,9 @@ static struct usb_driver cyberjack_driver = { }; static struct usb_serial_driver cyberjack_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Reiner SCT Cyberjack USB card reader", .short_name = "cyberjack", .id_table = id_table, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 4fb8e59d1527..b4069af4d565 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -177,7 +177,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "DeLorme Earthmate USB", .short_name = "earthmate", .id_table = id_table_earthmate, @@ -204,7 +206,9 @@ static struct usb_serial_driver cypress_earthmate_device = { }; static struct usb_serial_driver cypress_hidcom_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HID->COM RS232 Adapter", .short_name = "cyphidcom", .id_table = id_table_cyphidcomrs232, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 66feb88b4316..be9b495d2491 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -504,7 +504,9 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ static struct usb_serial_driver digi_acceleport_2_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 2 port USB adapter", .short_name = "digi_2", .id_table = id_table_2, @@ -531,7 +533,9 @@ static struct usb_serial_driver digi_acceleport_2_device = { }; static struct usb_serial_driver digi_acceleport_4_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 4 port USB adapter", .short_name = "digi_4", .id_table = id_table_4, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index cbea8b38b60e..3e6c4ba7667b 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -113,7 +113,9 @@ static struct usb_driver empeg_driver = { }; static struct usb_serial_driver empeg_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 529e1a7ccfa0..9d945de0acac 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -563,7 +563,9 @@ static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "FTDI USB Serial Device", .short_name = "ftdi_sio", .id_table = id_table_combined, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 7361194f1d66..3fd98c00cd6a 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1470,7 +1470,9 @@ static void garmin_shutdown (struct usb_serial *serial) /* All of the device info needed */ static struct usb_serial_driver garmin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Garmin GPS usb/tty", .short_name = "garmin_gps", .id_table = id_table, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 7f567bf96549..779bea0c6242 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -37,7 +37,9 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Generic", .short_name = "generic", .id_table = generic_device_ids, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index b49469907a87..4f3cbc08c4ee 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -45,7 +45,9 @@ static struct usb_driver hp49gp_driver = { }; static struct usb_serial_driver hp49gp_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 7314c04727fe..28fb0d42a166 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -76,7 +76,9 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 2 port adapter", .short_name = "edgeport_2", .id_table = edgeport_2port_id_table, @@ -104,7 +106,9 @@ static struct usb_serial_driver edgeport_2port_device = { }; static struct usb_serial_driver edgeport_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 4 port adapter", .short_name = "edgeport_4", .id_table = edgeport_4port_id_table, @@ -132,7 +136,9 @@ static struct usb_serial_driver edgeport_4port_device = { }; static struct usb_serial_driver edgeport_8port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 8 port adapter", .short_name = "edgeport_8", .id_table = edgeport_8port_id_table, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 4328cc702ef7..74228a072643 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2983,7 +2983,9 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 1 port adapter", .short_name = "edgeport_ti_1", .id_table = edgeport_1port_id_table, @@ -3011,7 +3013,9 @@ static struct usb_serial_driver edgeport_1port_device = { }; static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 2 port adapter", .short_name = "edgeport_ti_2", .id_table = edgeport_2port_id_table, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9a79ad8d7a5f..9aedfb91b20c 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -548,7 +548,9 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ static struct usb_serial_driver ipaq_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 04524d34de3b..2ba69623ac05 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -444,7 +444,9 @@ static int ipw_disconnect(struct usb_serial_port *port) } static struct usb_serial_driver ipw_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IPWireless converter", .short_name = "ipw", .id_table = usb_ipw_ids, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index ecfb2060ea0f..bf079059819e 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -134,7 +134,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 97e7d9e53e39..124d46e76a2e 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -571,7 +571,9 @@ static struct usb_device_id keyspan_4port_ids[] = { /* Structs for the devices, pre and post renumeration. */ static struct usb_serial_driver keyspan_pre_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan - (without firmware)", .short_name = "keyspan_no_firm", .id_table = keyspan_pre_ids, @@ -583,7 +585,9 @@ static struct usb_serial_driver keyspan_pre_device = { }; static struct usb_serial_driver keyspan_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 1 port adapter", .short_name = "keyspan_1", .id_table = keyspan_1port_ids, @@ -608,7 +612,9 @@ static struct usb_serial_driver keyspan_1port_device = { }; static struct usb_serial_driver keyspan_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 2 port adapter", .short_name = "keyspan_2", .id_table = keyspan_2port_ids, @@ -633,7 +639,9 @@ static struct usb_serial_driver keyspan_2port_device = { }; static struct usb_serial_driver keyspan_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 4 port adapter", .short_name = "keyspan_4", .id_table = keyspan_4port_ids, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 8fad0e963dd3..389b7833e3ae 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -784,7 +784,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) #ifdef KEYSPAN static struct usb_serial_driver keyspan_pda_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA - (prerenumeration)", .short_name = "keyspan_pda_pre", .id_table = id_table_fake, @@ -798,7 +800,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { #ifdef XIRCOM static struct usb_serial_driver xircom_pgs_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Xircom / Entregra PGS - (prerenumeration)", .short_name = "xircom_no_firm", .id_table = id_table_fake_xircom, @@ -811,7 +815,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { #endif static struct usb_serial_driver keyspan_pda_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA", .short_name = "keyspan_pda", .id_table = id_table_std, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index be082706b952..586108ce7897 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -124,7 +124,9 @@ static struct usb_driver kl5kusb105d_driver = { }; static struct usb_serial_driver kl5kusb105d_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KL5KUSB105D / PalmConnect", .short_name = "kl5kusb105d", .id_table = id_table, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 94944340bb8d..a9578e05b22f 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -106,7 +106,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 9470964316a7..7dcf91c5f83d 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -133,7 +133,9 @@ static struct usb_driver mct_u232_driver = { }; static struct usb_serial_driver mct_u232_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "MCT U232", .short_name = "mct_u232", .id_table = id_table_combined, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 53c0588877c0..f6327cc1b2e7 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -89,7 +89,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "ZyXEL - omni.net lcd plus usb", .short_name = "omninet", .id_table = id_table, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6ec9266e2e96..a2b5adf34868 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -106,7 +106,9 @@ static struct usb_driver option_driver = { * recognizes separately, thus num_port=1. */ static struct usb_serial_driver option_3port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Option 3G data card", .short_name = "option", .id_table = option_ids, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7134648e078d..beef3c4cee6e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -176,7 +176,9 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ static struct usb_serial_driver pl2303_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 87871bb647df..42a86ab689f4 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -398,7 +398,9 @@ static int safe_startup (struct usb_serial *serial) } static struct usb_serial_driver safe_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index f2efaf6f3d76..eab8a6de0925 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -256,7 +256,9 @@ static struct usb_driver ti_usb_driver = { }; static struct usb_serial_driver ti_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, @@ -283,7 +285,9 @@ static struct usb_serial_driver ti_1port_device = { }; static struct usb_serial_driver ti_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf083da15eb4..08f600327db4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -507,7 +507,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) /* lock this module before we call it * this may fail, which means we must bail out, * safe because we are called with BKL held */ - if (!try_module_get(serial->type->owner)) { + if (!try_module_get(serial->type->driver.owner)) { retval = -ENODEV; goto bailout_kref_put; } @@ -522,7 +522,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) return 0; bailout_module_put: - module_put(serial->type->owner); + module_put(serial->type->driver.owner); bailout_kref_put: kref_put(&serial->kref, destroy_serial); port->open_count = 0; @@ -553,7 +553,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp) port->tty = NULL; } - module_put(port->serial->type->owner); + module_put(port->serial->type->driver.owner); } kref_put(&port->serial->kref, destroy_serial); @@ -718,8 +718,8 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int continue; length += sprintf (page+length, "%d:", i); - if (serial->type->owner) - length += sprintf (page+length, " module:%s", module_name(serial->type->owner)); + if (serial->type->driver.owner) + length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); length += sprintf (page+length, " name:\"%s\"", serial->type->name); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), @@ -900,7 +900,7 @@ int usb_serial_probe(struct usb_interface *interface, if (type->probe) { const struct usb_device_id *id; - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; @@ -908,7 +908,7 @@ int usb_serial_probe(struct usb_interface *interface, id = usb_match_id(interface, type->id_table); retval = type->probe(serial, id); - module_put(type->owner); + module_put(type->driver.owner); if (retval) { dbg ("sub driver rejected device"); @@ -1007,13 +1007,13 @@ int usb_serial_probe(struct usb_interface *interface, if (!num_ports) { /* if this device type has a calc_num_ports function, call it */ if (type->calc_num_ports) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; } num_ports = type->calc_num_ports (serial); - module_put(type->owner); + module_put(type->driver.owner); } if (!num_ports) num_ports = type->num_ports; @@ -1158,12 +1158,12 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has an attach function, call it */ if (type->attach) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); goto probe_error; } retval = type->attach (serial); - module_put(type->owner); + module_put(type->driver.owner); if (retval < 0) goto probe_error; if (retval > 0) { diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index d6738b1b0429..4ca5e0c05611 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -189,7 +189,6 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @owner: pointer to the module that owns this driver. * @name: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. * @short_name: a pointer to a string that describes this driver in @@ -226,9 +225,11 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. + * + * The driver.owner field should be set to the module owner of this driver. + * */ struct usb_serial_driver { - struct module *owner; char *name; char *short_name; const struct usb_device_id *id_table; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 825451b3788c..0ac0377e8683 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -312,7 +312,9 @@ static struct usb_driver visor_driver = { /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ static struct usb_serial_driver handspring_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Handspring Visor / Palm OS", .short_name = "visor", .id_table = id_table, @@ -340,7 +342,9 @@ static struct usb_serial_driver handspring_device = { /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ static struct usb_serial_driver clie_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 5.0", .short_name = "clie_5", .id_table = clie_id_5_table, @@ -368,7 +372,9 @@ static struct usb_serial_driver clie_5_device = { /* device info for the Sony Clie OS version 3.5 */ static struct usb_serial_driver clie_3_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 3.5", .short_name = "clie_3.5", .id_table = clie_id_3_5_table, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index dc06664bfa0e..fb95a34a1cf7 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -157,7 +157,9 @@ static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT - (prerenumeration)", .short_name = "whiteheatnofirm", .id_table = id_table_prerenumeration, @@ -170,7 +172,9 @@ static struct usb_serial_driver whiteheat_fake_device = { }; static struct usb_serial_driver whiteheat_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT", .short_name = "whiteheat", .id_table = id_table_std, |