summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/cpufreq/Makefile1
-rw-r--r--drivers/cpufreq/unicore2-cpufreq.c76
-rw-r--r--drivers/i2c/busses/Kconfig11
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-puv3.c275
-rw-r--r--drivers/input/serio/i8042-unicore32io.h70
-rw-r--r--drivers/input/serio/i8042.h2
-rw-r--r--drivers/pwm/Kconfig9
-rw-r--r--drivers/pwm/Makefile1
-rw-r--r--drivers/pwm/pwm-puv3.c150
-rw-r--r--drivers/rtc/Kconfig9
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/rtc-puv3.c286
-rw-r--r--drivers/video/fbdev/Kconfig11
-rw-r--r--drivers/video/fbdev/Makefile1
-rw-r--r--drivers/video/fbdev/fb-puv3.c836
16 files changed, 0 insertions, 1740 deletions
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index f6670c4abbb0..089938ead681 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -108,4 +108,3 @@ obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o
obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
-obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c
deleted file mode 100644
index 98d392196df2..000000000000
--- a/drivers/cpufreq/unicore2-cpufreq.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * clock scaling for the UniCore-II
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-
-#include <mach/hardware.h>
-
-static struct cpufreq_driver ucv2_driver;
-
-/* make sure that only the "userspace" governor is run
- * -- anything else wouldn't make sense on this platform, anyway.
- */
-static int ucv2_verify_speed(struct cpufreq_policy_data *policy)
-{
- if (policy->cpu)
- return -EINVAL;
-
- cpufreq_verify_within_cpu_limits(policy);
- return 0;
-}
-
-static int ucv2_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- int ret;
-
- freqs.old = policy->cur;
- freqs.new = target_freq;
-
- cpufreq_freq_transition_begin(policy, &freqs);
- ret = clk_set_rate(policy->clk, target_freq * 1000);
- cpufreq_freq_transition_end(policy, &freqs, ret);
-
- return ret;
-}
-
-static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- policy->min = policy->cpuinfo.min_freq = 250000;
- policy->max = policy->cpuinfo.max_freq = 1000000;
- policy->clk = clk_get(NULL, "MAIN_CLK");
- return PTR_ERR_OR_ZERO(policy->clk);
-}
-
-static struct cpufreq_driver ucv2_driver = {
- .flags = CPUFREQ_STICKY | CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
- .verify = ucv2_verify_speed,
- .target = ucv2_target,
- .get = cpufreq_generic_get,
- .init = ucv2_cpu_init,
- .name = "UniCore-II",
-};
-
-static int __init ucv2_cpufreq_init(void)
-{
- return cpufreq_register_driver(&ucv2_driver);
-}
-
-arch_initcall(ucv2_cpufreq_init);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 735bf31a3fdf..88639e52c73a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -866,17 +866,6 @@ config I2C_PNX
This driver can also be built as a module. If so, the module
will be called i2c-pnx.
-config I2C_PUV3
- tristate "PKUnity v3 I2C bus support"
- depends on UNICORE32 && ARCH_PUV3
- select I2C_ALGOBIT
- help
- This driver supports the I2C IP inside the PKUnity-v3 SoC.
- This I2C bus controller is under AMBA/AXI bus.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-puv3.
-
config I2C_PXA
tristate "Intel PXA2XX I2C adapter"
depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 306d5dc3f417..19aff0e45cb5 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -88,7 +88,6 @@ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
-obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
obj-$(CONFIG_I2C_QCOM_CCI) += i2c-qcom-cci.o
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
deleted file mode 100644
index 5cec5a36807d..000000000000
--- a/drivers/i2c/busses/i2c-puv3.c
+++ /dev/null
@@ -1,275 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * I2C driver for PKUnity-v3 SoC
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-/*
- * Poll the i2c status register until the specified bit is set.
- * Returns 0 if timed out (100 msec).
- */
-static short poll_status(unsigned long bit)
-{
- int loop_cntr = 1000;
-
- if (bit & I2C_STATUS_TFNF) {
- do {
- udelay(10);
- } while (!(readl(I2C_STATUS) & bit) && (--loop_cntr > 0));
- } else {
- /* RXRDY handler */
- do {
- if (readl(I2C_TAR) == I2C_TAR_EEPROM)
- msleep(20);
- else
- udelay(10);
- } while (!(readl(I2C_RXFLR) & 0xf) && (--loop_cntr > 0));
- }
-
- return (loop_cntr > 0);
-}
-
-static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
-{
- int i2c_reg = *buf;
-
- /* Read data */
- while (length--) {
- if (!poll_status(I2C_STATUS_TFNF)) {
- dev_dbg(&adap->dev, "Tx FIFO Not Full timeout\n");
- return -ETIMEDOUT;
- }
-
- /* send addr */
- writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD);
-
- /* get ready to next write */
- i2c_reg++;
-
- /* send read CMD */
- writel(I2C_DATACMD_READ, I2C_DATACMD);
-
- /* wait until the Rx FIFO have available */
- if (!poll_status(I2C_STATUS_RFNE)) {
- dev_dbg(&adap->dev, "RXRDY timeout\n");
- return -ETIMEDOUT;
- }
-
- /* read the data to buf */
- *buf = (readl(I2C_DATACMD) & I2C_DATACMD_DAT_MASK);
- buf++;
- }
-
- return 0;
-}
-
-static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
-{
- int i2c_reg = *buf;
-
- /* Do nothing but storing the reg_num to a static variable */
- if (i2c_reg == -1) {
- printk(KERN_WARNING "Error i2c reg\n");
- return -ETIMEDOUT;
- }
-
- if (length == 1)
- return 0;
-
- buf++;
- length--;
- while (length--) {
- /* send addr */
- writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD);
-
- /* send write CMD */
- writel(*buf | I2C_DATACMD_WRITE, I2C_DATACMD);
-
- /* wait until the Rx FIFO have available */
- msleep(20);
-
- /* read the data to buf */
- i2c_reg++;
- buf++;
- }
-
- return 0;
-}
-
-/*
- * Generic i2c master transfer entrypoint.
- *
- */
-static int puv3_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg,
- int num)
-{
- int i, ret;
- unsigned char swap;
-
- /* Disable i2c */
- writel(I2C_ENABLE_DISABLE, I2C_ENABLE);
-
- /* Set the work mode and speed*/
- writel(I2C_CON_MASTER | I2C_CON_SPEED_STD | I2C_CON_SLAVEDISABLE, I2C_CON);
-
- writel(pmsg->addr, I2C_TAR);
-
- /* Enable i2c */
- writel(I2C_ENABLE_ENABLE, I2C_ENABLE);
-
- dev_dbg(&adap->dev, "puv3_i2c_xfer: processing %d messages:\n", num);
-
- for (i = 0; i < num; i++) {
- dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i,
- pmsg->flags & I2C_M_RD ? "read" : "writ",
- pmsg->len, pmsg->len > 1 ? "s" : "",
- pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-
- if (pmsg->len && pmsg->buf) { /* sanity check */
- if (pmsg->flags & I2C_M_RD)
- ret = xfer_read(adap, pmsg->buf, pmsg->len);
- else
- ret = xfer_write(adap, pmsg->buf, pmsg->len);
-
- if (ret)
- return ret;
-
- }
- dev_dbg(&adap->dev, "transfer complete\n");
- pmsg++; /* next message */
- }
-
- /* XXX: fixup be16_to_cpu in bq27x00_battery.c */
- if (pmsg->addr == I2C_TAR_PWIC) {
- swap = pmsg->buf[0];
- pmsg->buf[0] = pmsg->buf[1];
- pmsg->buf[1] = swap;
- }
-
- return i;
-}
-
-/*
- * Return list of supported functionality.
- */
-static u32 puv3_i2c_func(struct i2c_adapter *adapter)
-{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm puv3_i2c_algorithm = {
- .master_xfer = puv3_i2c_xfer,
- .functionality = puv3_i2c_func,
-};
-
-/*
- * Main initialization routine.
- */
-static int puv3_i2c_probe(struct platform_device *pdev)
-{
- struct i2c_adapter *adapter;
- struct resource *mem;
- int rc;
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem)
- return -ENODEV;
-
- if (!request_mem_region(mem->start, resource_size(mem), "puv3_i2c"))
- return -EBUSY;
-
- adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
- if (adapter == NULL) {
- dev_err(&pdev->dev, "can't allocate interface!\n");
- rc = -ENOMEM;
- goto fail_nomem;
- }
- snprintf(adapter->name, sizeof(adapter->name), "PUV3-I2C at 0x%08x",
- mem->start);
- adapter->algo = &puv3_i2c_algorithm;
- adapter->class = I2C_CLASS_HWMON;
- adapter->dev.parent = &pdev->dev;
-
- platform_set_drvdata(pdev, adapter);
-
- adapter->nr = pdev->id;
- rc = i2c_add_numbered_adapter(adapter);
- if (rc)
- goto fail_add_adapter;
-
- dev_info(&pdev->dev, "PKUnity v3 i2c bus adapter.\n");
- return 0;
-
-fail_add_adapter:
- kfree(adapter);
-fail_nomem:
- release_mem_region(mem->start, resource_size(mem));
-
- return rc;
-}
-
-static int puv3_i2c_remove(struct platform_device *pdev)
-{
- struct i2c_adapter *adapter = platform_get_drvdata(pdev);
- struct resource *mem;
-
- i2c_del_adapter(adapter);
-
- put_device(&pdev->dev);
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem->start, resource_size(mem));
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int puv3_i2c_suspend(struct device *dev)
-{
- int poll_count;
- /* Disable the IIC */
- writel(I2C_ENABLE_DISABLE, I2C_ENABLE);
- for (poll_count = 0; poll_count < 50; poll_count++) {
- if (readl(I2C_ENSTATUS) & I2C_ENSTATUS_ENABLE)
- udelay(25);
- }
-
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(puv3_i2c_pm, puv3_i2c_suspend, NULL);
-#define PUV3_I2C_PM (&puv3_i2c_pm)
-
-#else
-#define PUV3_I2C_PM NULL
-#endif
-
-static struct platform_driver puv3_i2c_driver = {
- .probe = puv3_i2c_probe,
- .remove = puv3_i2c_remove,
- .driver = {
- .name = "PKUnity-v3-I2C",
- .pm = PUV3_I2C_PM,
- }
-};
-
-module_platform_driver(puv3_i2c_driver);
-
-MODULE_DESCRIPTION("PKUnity v3 I2C driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:puv3_i2c");
diff --git a/drivers/input/serio/i8042-unicore32io.h b/drivers/input/serio/i8042-unicore32io.h
deleted file mode 100644
index 50bb3ed94b56..000000000000
--- a/drivers/input/serio/i8042-unicore32io.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- * Copyright (C) 2001-2011 Guan Xuetao
- */
-#ifndef _I8042_UNICORE32_H
-#define _I8042_UNICORE32_H
-
-#include <mach/hardware.h>
-
-/*
- * Names.
- */
-#define I8042_KBD_PHYS_DESC "isa0060/serio0"
-#define I8042_AUX_PHYS_DESC "isa0060/serio1"
-#define I8042_MUX_PHYS_DESC "isa0060/serio%d"
-
-/*
- * IRQs.
- */
-#define I8042_KBD_IRQ IRQ_PS2_KBD
-#define I8042_AUX_IRQ IRQ_PS2_AUX
-
-/*
- * Register numbers.
- */
-#define I8042_COMMAND_REG PS2_COMMAND
-#define I8042_STATUS_REG PS2_STATUS
-#define I8042_DATA_REG PS2_DATA
-
-#define I8042_REGION_START (resource_size_t)(PS2_DATA)
-#define I8042_REGION_SIZE (resource_size_t)(16)
-
-static inline int i8042_read_data(void)
-{
- return readb(I8042_DATA_REG);
-}
-
-static inline int i8042_read_status(void)
-{
- return readb(I8042_STATUS_REG);
-}
-
-static inline void i8042_write_data(int val)
-{
- writeb(val, I8042_DATA_REG);
-}
-
-static inline void i8042_write_command(int val)
-{
- writeb(val, I8042_COMMAND_REG);
-}
-
-static inline int i8042_platform_init(void)
-{
- if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
- return -EBUSY;
-
- i8042_reset = I8042_RESET_ALWAYS;
- return 0;
-}
-
-static inline void i8042_platform_exit(void)
-{
- release_mem_region(I8042_REGION_START, I8042_REGION_SIZE);
-}
-
-#endif /* _I8042_UNICORE32_H */
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index eb376700dfff..55381783dc82 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -21,8 +21,6 @@
#include "i8042-sparcio.h"
#elif defined(CONFIG_X86) || defined(CONFIG_IA64)
#include "i8042-x86ia64io.h"
-#elif defined(CONFIG_UNICORE32)
-#include "i8042-unicore32io.h"
#else
#include "i8042-io.h"
#endif
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index cb8d739067d2..7dbcf6973d33 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -370,15 +370,6 @@ config PWM_PCA9685
To compile this driver as a module, choose M here: the module
will be called pwm-pca9685.
-config PWM_PUV3
- tristate "PKUnity NetBook-0916 PWM support"
- depends on ARCH_PUV3
- help
- Generic PWM framework driver for PKUnity NetBook-0916.
-
- To compile this driver as a module, choose M here: the module
- will be called pwm-puv3.
-
config PWM_PXA
tristate "PXA PWM support"
depends on ARCH_PXA || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index a59c710e98c7..2c2ba0a03557 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
-obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
obj-$(CONFIG_PWM_RCAR) += pwm-rcar.o
obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o
diff --git a/drivers/pwm/pwm-puv3.c b/drivers/pwm/pwm-puv3.c
deleted file mode 100644
index 9d0bd87a425e..000000000000
--- a/drivers/pwm/pwm-puv3.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pwm.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <asm/div64.h>
-#include <mach/hardware.h>
-
-struct puv3_pwm_chip {
- struct pwm_chip chip;
- void __iomem *base;
- struct clk *clk;
-};
-
-static inline struct puv3_pwm_chip *to_puv3(struct pwm_chip *chip)
-{
- return container_of(chip, struct puv3_pwm_chip, chip);
-}
-
-/*
- * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
- * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- */
-static int puv3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
-{
- unsigned long period_cycles, prescale, pv, dc;
- struct puv3_pwm_chip *puv3 = to_puv3(chip);
- unsigned long long c;
-
- c = clk_get_rate(puv3->clk);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- if (period_cycles < 1)
- period_cycles = 1;
-
- prescale = (period_cycles - 1) / 1024;
- pv = period_cycles / (prescale + 1) - 1;
-
- if (prescale > 63)
- return -EINVAL;
-
- if (duty_ns == period_ns)
- dc = OST_PWMDCCR_FDCYCLE;
- else
- dc = (pv + 1) * duty_ns / period_ns;
-
- /*
- * NOTE: the clock to PWM has to be enabled first
- * before writing to the registers
- */
- clk_prepare_enable(puv3->clk);
-
- writel(prescale, puv3->base + OST_PWM_PWCR);
- writel(pv - dc, puv3->base + OST_PWM_DCCR);
- writel(pv, puv3->base + OST_PWM_PCR);
-
- clk_disable_unprepare(puv3->clk);
-
- return 0;
-}
-
-static int puv3_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct puv3_pwm_chip *puv3 = to_puv3(chip);
-
- return clk_prepare_enable(puv3->clk);
-}
-
-static void puv3_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct puv3_pwm_chip *puv3 = to_puv3(chip);
-
- clk_disable_unprepare(puv3->clk);
-}
-
-static const struct pwm_ops puv3_pwm_ops = {
- .config = puv3_pwm_config,
- .enable = puv3_pwm_enable,
- .disable = puv3_pwm_disable,
- .owner = THIS_MODULE,
-};
-
-static int pwm_probe(struct platform_device *pdev)
-{
- struct puv3_pwm_chip *puv3;
- struct resource *r;
- int ret;
-
- puv3 = devm_kzalloc(&pdev->dev, sizeof(*puv3), GFP_KERNEL);
- if (!puv3)
- return -ENOMEM;
-
- puv3->clk = devm_clk_get(&pdev->dev, "OST_CLK");
- if (IS_ERR(puv3->clk))
- return PTR_ERR(puv3->clk);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- puv3->base = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(puv3->base))
- return PTR_ERR(puv3->base);
-
- puv3->chip.dev = &pdev->dev;
- puv3->chip.ops = &puv3_pwm_ops;
- puv3->chip.base = -1;
- puv3->chip.npwm = 1;
-
- ret = pwmchip_add(&puv3->chip);
- if (ret < 0) {
- dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
- return ret;
- }
-
- platform_set_drvdata(pdev, puv3);
- return 0;
-}
-
-static int pwm_remove(struct platform_device *pdev)
-{
- struct puv3_pwm_chip *puv3 = platform_get_drvdata(pdev);
-
- return pwmchip_remove(&puv3->chip);
-}
-
-static struct platform_driver puv3_pwm_driver = {
- .driver = {
- .name = "PKUnity-v3-PWM",
- },
- .probe = pwm_probe,
- .remove = pwm_remove,
-};
-module_platform_driver(puv3_pwm_driver);
-
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index b54d87d45c89..f3b8e6dcd879 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1729,15 +1729,6 @@ config RTC_DRV_TEGRA
This drive can also be built as a module. If so, the module
will be called rtc-tegra.
-config RTC_DRV_PUV3
- tristate "PKUnity v3 RTC support"
- depends on ARCH_PUV3
- help
- This enables support for the RTC in the PKUnity-v3 SoCs.
-
- This drive can also be built as a module. If so, the module
- will be called rtc-puv3.
-
config RTC_DRV_LOONGSON1
tristate "loongson1 RTC support"
depends on MACH_LOONGSON32
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 0721752c6ed4..880e08a409c3 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -128,7 +128,6 @@ obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o
obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o
-obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o
obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
obj-$(CONFIG_RTC_DRV_R7301) += rtc-r7301.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c
deleted file mode 100644
index 954b88d2485f..000000000000
--- a/drivers/rtc/rtc-puv3.c
+++ /dev/null
@@ -1,286 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * RTC driver code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
-#include <linux/clk.h>
-#include <linux/log2.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-static struct resource *puv3_rtc_mem;
-
-static int puv3_rtc_alarmno = IRQ_RTCAlarm;
-static int puv3_rtc_tickno = IRQ_RTC;
-
-static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
-
-/* IRQ Handlers */
-static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
-{
- struct rtc_device *rdev = id;
-
- writel(readl(RTC_RTSR) | RTC_RTSR_AL, RTC_RTSR);
- rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t puv3_rtc_tickirq(int irq, void *id)
-{
- struct rtc_device *rdev = id;
-
- writel(readl(RTC_RTSR) | RTC_RTSR_HZ, RTC_RTSR);
- rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
- return IRQ_HANDLED;
-}
-
-/* Update control registers */
-static void puv3_rtc_setaie(struct device *dev, int to)
-{
- unsigned int tmp;
-
- dev_dbg(dev, "%s: aie=%d\n", __func__, to);
-
- tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE;
-
- if (to)
- tmp |= RTC_RTSR_ALE;
-
- writel(tmp, RTC_RTSR);
-}
-
-static int puv3_rtc_setpie(struct device *dev, int enabled)
-{
- unsigned int tmp;
-
- dev_dbg(dev, "%s: pie=%d\n", __func__, enabled);
-
- spin_lock_irq(&puv3_rtc_pie_lock);
- tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE;
-
- if (enabled)
- tmp |= RTC_RTSR_HZE;
-
- writel(tmp, RTC_RTSR);
- spin_unlock_irq(&puv3_rtc_pie_lock);
-
- return 0;
-}
-
-/* Time read/write */
-static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
-{
- rtc_time64_to_tm(readl(RTC_RCNR), rtc_tm);
-
- dev_dbg(dev, "read time %ptRr\n", rtc_tm);
-
- return 0;
-}
-
-static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm)
-{
- dev_dbg(dev, "set time %ptRr\n", tm);
-
- writel(rtc_tm_to_time64(tm), RTC_RCNR);
-
- return 0;
-}
-
-static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
-{
- struct rtc_time *alm_tm = &alrm->time;
-
- rtc_time64_to_tm(readl(RTC_RTAR), alm_tm);
-
- alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE;
-
- dev_dbg(dev, "read alarm: %d, %ptRr\n", alrm->enabled, alm_tm);
-
- return 0;
-}
-
-static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
-{
- struct rtc_time *tm = &alrm->time;
-
- dev_dbg(dev, "set alarm: %d, %ptRr\n", alrm->enabled, tm);
-
- writel(rtc_tm_to_time64(tm), RTC_RTAR);
-
- puv3_rtc_setaie(dev, alrm->enabled);
-
- if (alrm->enabled)
- enable_irq_wake(puv3_rtc_alarmno);
- else
- disable_irq_wake(puv3_rtc_alarmno);
-
- return 0;
-}
-
-static int puv3_rtc_proc(struct device *dev, struct seq_file *seq)
-{
- seq_printf(seq, "periodic_IRQ\t: %s\n",
- (readl(RTC_RTSR) & RTC_RTSR_HZE) ? "yes" : "no");
- return 0;
-}
-
-static const struct rtc_class_ops puv3_rtcops = {
- .read_time = puv3_rtc_gettime,
- .set_time = puv3_rtc_settime,
- .read_alarm = puv3_rtc_getalarm,
- .set_alarm = puv3_rtc_setalarm,
- .proc = puv3_rtc_proc,
-};
-
-static void puv3_rtc_enable(struct device *dev, int en)
-{
- if (!en) {
- writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR);
- } else {
- /* re-enable the device, and check it is ok */
- if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) {
- dev_info(dev, "rtc disabled, re-enabling\n");
- writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR);
- }
- }
-}
-
-static int puv3_rtc_remove(struct platform_device *dev)
-{
- puv3_rtc_setpie(&dev->dev, 0);
- puv3_rtc_setaie(&dev->dev, 0);
-
- release_resource(puv3_rtc_mem);
- kfree(puv3_rtc_mem);
-
- return 0;
-}
-
-static int puv3_rtc_probe(struct platform_device *pdev)
-{
- struct rtc_device *rtc;
- struct resource *res;
- int ret;
-
- dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev);
-
- /* find the IRQs */
- puv3_rtc_tickno = platform_get_irq(pdev, 1);
- if (puv3_rtc_tickno < 0)
- return -ENOENT;
-
- puv3_rtc_alarmno = platform_get_irq(pdev, 0);
- if (puv3_rtc_alarmno < 0)
- return -ENOENT;
-
- dev_dbg(&pdev->dev, "PKUnity_rtc: tick irq %d, alarm irq %d\n",
- puv3_rtc_tickno, puv3_rtc_alarmno);
-
- rtc = devm_rtc_allocate_device(&pdev->dev);
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
-
- ret = devm_request_irq(&pdev->dev, puv3_rtc_alarmno, puv3_rtc_alarmirq,
- 0, "pkunity-rtc alarm", rtc);
- if (ret) {
- dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_alarmno, ret);
- return ret;
- }
-
- ret = devm_request_irq(&pdev->dev, puv3_rtc_tickno, puv3_rtc_tickirq,
- 0, "pkunity-rtc tick", rtc);
- if (ret) {
- dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_tickno, ret);
- return ret;
- }
-
- /* get the memory region */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "failed to get memory region resource\n");
- return -ENOENT;
- }
-
- puv3_rtc_mem = request_mem_region(res->start, resource_size(res),
- pdev->name);
-
- if (puv3_rtc_mem == NULL) {
- dev_err(&pdev->dev, "failed to reserve memory region\n");
- ret = -ENOENT;
- goto err_nores;
- }
-
- puv3_rtc_enable(&pdev->dev, 1);
-
- /* register RTC and exit */
- rtc->ops = &puv3_rtcops;
- rtc->range_max = U32_MAX;
- ret = rtc_register_device(rtc);
- if (ret)
- goto err_nortc;
-
- /* platform setup code should have handled this; sigh */
- if (!device_can_wakeup(&pdev->dev))
- device_init_wakeup(&pdev->dev, 1);
-
- platform_set_drvdata(pdev, rtc);
- return 0;
-
- err_nortc:
- puv3_rtc_enable(&pdev->dev, 0);
- release_resource(puv3_rtc_mem);
-
- err_nores:
- return ret;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int ticnt_save;
-
-static int puv3_rtc_suspend(struct device *dev)
-{
- /* save RTAR for anyone using periodic interrupts */
- ticnt_save = readl(RTC_RTAR);
- puv3_rtc_enable(dev, 0);
- return 0;
-}
-
-static int puv3_rtc_resume(struct device *dev)
-{
- puv3_rtc_enable(dev, 1);
- writel(ticnt_save, RTC_RTAR);
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(puv3_rtc_pm_ops, puv3_rtc_suspend, puv3_rtc_resume);
-
-static struct platform_driver puv3_rtc_driver = {
- .probe = puv3_rtc_probe,
- .remove = puv3_rtc_remove,
- .driver = {
- .name = "PKUnity-v3-RTC",
- .pm = &puv3_rtc_pm_ops,
- }
-};
-
-module_platform_driver(puv3_rtc_driver);
-
-MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
-MODULE_AUTHOR("Hu Dongliang");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 0f559aeaf469..32a2698914c3 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2198,17 +2198,6 @@ config FB_BROADSHEET
and could also have been called by other names when coupled with
a bridge adapter.
-config FB_PUV3_UNIGFX
- tristate "PKUnity v3 Unigfx framebuffer support"
- depends on FB && UNICORE32 && ARCH_PUV3
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- help
- Choose this option if you want to use the Unigfx device as a
- framebuffer device. Without the support of PCI & AGP.
-
config FB_HYPERV
tristate "Microsoft Hyper-V Synthetic Video support"
depends on FB && HYPERV
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index aa6352798cf4..a0705b99e643 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -116,7 +116,6 @@ obj-y += omap2/
obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
obj-$(CONFIG_FB_CARMINE) += carminefb.o
obj-$(CONFIG_FB_MB862XX) += mb862xx/
-obj-$(CONFIG_FB_PUV3_UNIGFX) += fb-puv3.o
obj-$(CONFIG_FB_HYPERV) += hyperv_fb.o
obj-$(CONFIG_FB_OPENCORES) += ocfb.o
obj-$(CONFIG_FB_SM712) += sm712fb.o
diff --git a/drivers/video/fbdev/fb-puv3.c b/drivers/video/fbdev/fb-puv3.c
deleted file mode 100644
index 030e85c11a78..000000000000
--- a/drivers/video/fbdev/fb-puv3.c
+++ /dev/null
@@ -1,836 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Frame Buffer Driver for PKUnity-v3 Unigfx
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/mm.h>
-
-#include <linux/sizes.h>
-#include <mach/hardware.h>
-
-/* Platform_data reserved for unifb registers. */
-#define UNIFB_REGS_NUM 10
-/* RAM reserved for the frame buffer. */
-#define UNIFB_MEMSIZE (SZ_4M) /* 4 MB for 1024*768*32b */
-
-/*
- * cause UNIGFX don not have EDID
- * all the modes are organized as follow
- */
-static const struct fb_videomode unifb_modes[] = {
- /* 0 640x480-60 VESA */
- { "640x480@60", 60, 640, 480, 25175000, 48, 16, 34, 10, 96, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 1 640x480-75 VESA */
- { "640x480@75", 75, 640, 480, 31500000, 120, 16, 18, 1, 64, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 2 800x600-60 VESA */
- { "800x600@60", 60, 800, 600, 40000000, 88, 40, 26, 1, 128, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 3 800x600-75 VESA */
- { "800x600@75", 75, 800, 600, 49500000, 160, 16, 23, 1, 80, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 4 1024x768-60 VESA */
- { "1024x768@60", 60, 1024, 768, 65000000, 160, 24, 34, 3, 136, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 5 1024x768-75 VESA */
- { "1024x768@75", 75, 1024, 768, 78750000, 176, 16, 30, 1, 96, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 6 1280x960-60 VESA */
- { "1280x960@60", 60, 1280, 960, 108000000, 312, 96, 38, 1, 112, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 7 1440x900-60 VESA */
- { "1440x900@60", 60, 1440, 900, 106500000, 232, 80, 30, 3, 152, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 8 FIXME 9 1024x600-60 VESA UNTESTED */
- { "1024x600@60", 60, 1024, 600, 50650000, 160, 24, 26, 1, 136, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 9 FIXME 10 1024x600-75 VESA UNTESTED */
- { "1024x600@75", 75, 1024, 600, 61500000, 176, 16, 23, 1, 96, 1,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
- /* 10 FIXME 11 1366x768-60 VESA UNTESTED */
- { "1366x768@60", 60, 1366, 768, 85500000, 256, 58, 18, 1, 112, 3,
- 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-};
-
-static const struct fb_var_screeninfo unifb_default = {
- .xres = 640,
- .yres = 480,
- .xres_virtual = 640,
- .yres_virtual = 480,
- .bits_per_pixel = 16,
- .red = { 11, 5, 0 },
- .green = { 5, 6, 0 },
- .blue = { 0, 5, 0 },
- .activate = FB_ACTIVATE_NOW,
- .height = -1,
- .width = -1,
- .pixclock = 25175000,
- .left_margin = 48,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 96,
- .vsync_len = 2,
- .vmode = FB_VMODE_NONINTERLACED,
-};
-
-static struct fb_fix_screeninfo unifb_fix = {
- .id = "UNIGFX FB",
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .xpanstep = 1,
- .ypanstep = 1,
- .ywrapstep = 1,
- .accel = FB_ACCEL_NONE,
-};
-
-static void unifb_sync(struct fb_info *info)
-{
- /* TODO: may, this can be replaced by interrupt */
- int cnt;
-
- for (cnt = 0; cnt < 0x10000000; cnt++) {
- if (readl(UGE_COMMAND) & 0x1000000)
- return;
- }
-
- if (cnt > 0x8000000)
- dev_warn(info->device, "Warning: UniGFX GE time out ...\n");
-}
-
-static void unifb_prim_fillrect(struct fb_info *info,
- const struct fb_fillrect *region)
-{
- int awidth = region->width;
- int aheight = region->height;
- int m_iBpp = info->var.bits_per_pixel;
- int screen_width = info->var.xres;
- int src_sel = 1; /* from fg_color */
- int pat_sel = 1;
- int src_x0 = 0;
- int dst_x0 = region->dx;
- int src_y0 = 0;
- int dst_y0 = region->dy;
- int rop_alpha_sel = 0;
- int rop_alpha_code = 0xCC;
- int x_dir = 1;
- int y_dir = 1;
- int alpha_r = 0;
- int alpha_sel = 0;
- int dst_pitch = screen_width * (m_iBpp / 8);
- int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8);
- int src_pitch = screen_width * (m_iBpp / 8);
- int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8);
- unsigned int command = 0;
- int clip_region = 0;
- int clip_en = 0;
- int tp_en = 0;
- int fg_color = 0;
- int bottom = info->var.yres - 1;
- int right = info->var.xres - 1;
- int top = 0;
-
- bottom = (bottom << 16) | right;
- command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16)
- | (x_dir << 20) | (y_dir << 21) | (command << 24)
- | (clip_region << 23) | (clip_en << 22) | (tp_en << 27);
- src_pitch = (dst_pitch << 16) | src_pitch;
- awidth = awidth | (aheight << 16);
- alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff)
- | (alpha_sel << 16);
- src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16);
- dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16);
- fg_color = region->color;
-
- unifb_sync(info);
-
- writel(((u32 *)(info->pseudo_palette))[fg_color], UGE_FCOLOR);
- writel(0, UGE_BCOLOR);
- writel(src_pitch, UGE_PITCH);
- writel(src_offset, UGE_SRCSTART);
- writel(dst_offset, UGE_DSTSTART);
- writel(awidth, UGE_WIDHEIGHT);
- writel(top, UGE_CLIP0);
- writel(bottom, UGE_CLIP1);
- writel(alpha_r, UGE_ROPALPHA);
- writel(src_x0, UGE_SRCXY);
- writel(dst_x0, UGE_DSTXY);
- writel(command, UGE_COMMAND);
-}
-
-static void unifb_fillrect(struct fb_info *info,
- const struct fb_fillrect *region)
-{
- struct fb_fillrect modded;
- int vxres, vyres;
-
- if (info->flags & FBINFO_HWACCEL_DISABLED) {
- sys_fillrect(info, region);
- return;
- }
-
- vxres = info->var.xres_virtual;
- vyres = info->var.yres_virtual;
-
- memcpy(&modded, region, sizeof(struct fb_fillrect));
-
- if (!modded.width || !modded.height ||
- modded.dx >= vxres || modded.dy >= vyres)
- return;
-
- if (modded.dx + modded.width > vxres)
- modded.width = vxres - modded.dx;
- if (modded.dy + modded.height > vyres)
- modded.height = vyres - modded.dy;
-
- unifb_prim_fillrect(info, &modded);
-}
-
-static void unifb_prim_copyarea(struct fb_info *info,
- const struct fb_copyarea *area)
-{
- int awidth = area->width;
- int aheight = area->height;
- int m_iBpp = info->var.bits_per_pixel;
- int screen_width = info->var.xres;
- int src_sel = 2; /* from mem */
- int pat_sel = 0;
- int src_x0 = area->sx;
- int dst_x0 = area->dx;
- int src_y0 = area->sy;
- int dst_y0 = area->dy;
-
- int rop_alpha_sel = 0;
- int rop_alpha_code = 0xCC;
- int x_dir = 1;
- int y_dir = 1;
-
- int alpha_r = 0;
- int alpha_sel = 0;
- int dst_pitch = screen_width * (m_iBpp / 8);
- int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8);
- int src_pitch = screen_width * (m_iBpp / 8);
- int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8);
- unsigned int command = 0;
- int clip_region = 0;
- int clip_en = 1;
- int tp_en = 0;
- int top = 0;
- int bottom = info->var.yres;
- int right = info->var.xres;
- int fg_color = 0;
- int bg_color = 0;
-
- if (src_x0 < 0)
- src_x0 = 0;
- if (src_y0 < 0)
- src_y0 = 0;
-
- if (src_y0 - dst_y0 > 0) {
- y_dir = 1;
- } else {
- y_dir = 0;
- src_offset = (src_y0 + aheight) * src_pitch +
- src_x0 * (m_iBpp / 8);
- dst_offset = (dst_y0 + aheight) * dst_pitch +
- dst_x0 * (m_iBpp / 8);
- src_y0 += aheight;
- dst_y0 += aheight;
- }
-
- command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16) |
- (x_dir << 20) | (y_dir << 21) | (command << 24) |
- (clip_region << 23) | (clip_en << 22) | (tp_en << 27);
- src_pitch = (dst_pitch << 16) | src_pitch;
- awidth = awidth | (aheight << 16);
- alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff) |
- (alpha_sel << 16);
- src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16);
- dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16);
- bottom = (bottom << 16) | right;
-
- unifb_sync(info);
-
- writel(src_pitch, UGE_PITCH);
- writel(src_offset, UGE_SRCSTART);
- writel(dst_offset, UGE_DSTSTART);
- writel(awidth, UGE_WIDHEIGHT);
- writel(top, UGE_CLIP0);
- writel(bottom, UGE_CLIP1);
- writel(bg_color, UGE_BCOLOR);
- writel(fg_color, UGE_FCOLOR);
- writel(alpha_r, UGE_ROPALPHA);
- writel(src_x0, UGE_SRCXY);
- writel(dst_x0, UGE_DSTXY);
- writel(command, UGE_COMMAND);
-}
-
-static void unifb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
-{
- struct fb_copyarea modded;
- u32 vxres, vyres;
- modded.sx = area->sx;
- modded.sy = area->sy;
- modded.dx = area->dx;
- modded.dy = area->dy;
- modded.width = area->width;
- modded.height = area->height;
-
- if (info->flags & FBINFO_HWACCEL_DISABLED) {
- sys_copyarea(info, area);
- return;
- }
-
- vxres = info->var.xres_virtual;
- vyres = info->var.yres_virtual;
-
- if (!modded.width || !modded.height ||
- modded.sx >= vxres || modded.sy >= vyres ||
- modded.dx >= vxres || modded.dy >= vyres)
- return;
-
- if (modded.sx + modded.width > vxres)
- modded.width = vxres - modded.sx;
- if (modded.dx + modded.width > vxres)
- modded.width = vxres - modded.dx;
- if (modded.sy + modded.height > vyres)
- modded.height = vyres - modded.sy;
- if (modded.dy + modded.height > vyres)
- modded.height = vyres - modded.dy;
-
- unifb_prim_copyarea(info, &modded);
-}
-
-static void unifb_imageblit(struct fb_info *info, const struct fb_image *image)
-{
- sys_imageblit(info, image);
-}
-
-static u_long get_line_length(int xres_virtual, int bpp)
-{
- u_long length;
-
- length = xres_virtual * bpp;
- length = (length + 31) & ~31;
- length >>= 3;
- return length;
-}
-
-/*
- * Setting the video mode has been split into two parts.
- * First part, xxxfb_check_var, must not write anything
- * to hardware, it should only verify and adjust var.
- * This means it doesn't alter par but it does use hardware
- * data from it to check this var.
- */
-static int unifb_check_var(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- u_long line_length;
-
- /*
- * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
- * as FB_VMODE_SMOOTH_XPAN is only used internally
- */
-
- if (var->vmode & FB_VMODE_CONUPDATE) {
- var->vmode |= FB_VMODE_YWRAP;
- var->xoffset = info->var.xoffset;
- var->yoffset = info->var.yoffset;
- }
-
- /*
- * Some very basic checks
- */
- if (!var->xres)
- var->xres = 1;
- if (!var->yres)
- var->yres = 1;
- if (var->xres > var->xres_virtual)
- var->xres_virtual = var->xres;
- if (var->yres > var->yres_virtual)
- var->yres_virtual = var->yres;
- if (var->bits_per_pixel <= 1)
- var->bits_per_pixel = 1;
- else if (var->bits_per_pixel <= 8)
- var->bits_per_pixel = 8;
- else if (var->bits_per_pixel <= 16)
- var->bits_per_pixel = 16;
- else if (var->bits_per_pixel <= 24)
- var->bits_per_pixel = 24;
- else if (var->bits_per_pixel <= 32)
- var->bits_per_pixel = 32;
- else
- return -EINVAL;
-
- if (var->xres_virtual < var->xoffset + var->xres)
- var->xres_virtual = var->xoffset + var->xres;
- if (var->yres_virtual < var->yoffset + var->yres)
- var->yres_virtual = var->yoffset + var->yres;
-
- /*
- * Memory limit
- */
- line_length =
- get_line_length(var->xres_virtual, var->bits_per_pixel);
- if (line_length * var->yres_virtual > UNIFB_MEMSIZE)
- return -ENOMEM;
-
- /*
- * Now that we checked it we alter var. The reason being is that the
- * video mode passed in might not work but slight changes to it might
- * make it work. This way we let the user know what is acceptable.
- */
- switch (var->bits_per_pixel) {
- case 1:
- case 8:
- var->red.offset = 0;
- var->red.length = 8;
- var->green.offset = 0;
- var->green.length = 8;
- var->blue.offset = 0;
- var->blue.length = 8;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
- case 16: /* RGBA 5551 */
- if (var->transp.length) {
- var->red.offset = 0;
- var->red.length = 5;
- var->green.offset = 5;
- var->green.length = 5;
- var->blue.offset = 10;
- var->blue.length = 5;
- var->transp.offset = 15;
- var->transp.length = 1;
- } else { /* RGB 565 */
- var->red.offset = 11;
- var->red.length = 5;
- var->green.offset = 5;
- var->green.length = 6;
- var->blue.offset = 0;
- var->blue.length = 5;
- var->transp.offset = 0;
- var->transp.length = 0;
- }
- break;
- case 24: /* RGB 888 */
- var->red.offset = 0;
- var->red.length = 8;
- var->green.offset = 8;
- var->green.length = 8;
- var->blue.offset = 16;
- var->blue.length = 8;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
- case 32: /* RGBA 8888 */
- var->red.offset = 16;
- var->red.length = 8;
- var->green.offset = 8;
- var->green.length = 8;
- var->blue.offset = 0;
- var->blue.length = 8;
- var->transp.offset = 24;
- var->transp.length = 8;
- break;
- }
- var->red.msb_right = 0;
- var->green.msb_right = 0;
- var->blue.msb_right = 0;
- var->transp.msb_right = 0;
-
- return 0;
-}
-
-/*
- * This routine actually sets the video mode. It's in here where we
- * the hardware state info->par and fix which can be affected by the
- * change in par. For this driver it doesn't do much.
- */
-static int unifb_set_par(struct fb_info *info)
-{
- int hTotal, vTotal, hSyncStart, hSyncEnd, vSyncStart, vSyncEnd;
- int format;
-
-#ifdef CONFIG_PUV3_PM
- struct clk *clk_vga;
- u32 pixclk = 0;
- int i;
-
- for (i = 0; i <= 10; i++) {
- if (info->var.xres == unifb_modes[i].xres
- && info->var.yres == unifb_modes[i].yres
- && info->var.upper_margin == unifb_modes[i].upper_margin
- && info->var.lower_margin == unifb_modes[i].lower_margin
- && info->var.left_margin == unifb_modes[i].left_margin
- && info->var.right_margin == unifb_modes[i].right_margin
- && info->var.hsync_len == unifb_modes[i].hsync_len
- && info->var.vsync_len == unifb_modes[i].vsync_len) {
- pixclk = unifb_modes[i].pixclock;
- break;
- }
- }
-
- /* set clock rate */
- clk_vga = clk_get(info->device, "VGA_CLK");
- if (clk_vga == ERR_PTR(-ENOENT))
- return -ENOENT;
-
- if (pixclk != 0) {
- if (clk_set_rate(clk_vga, pixclk)) { /* set clock failed */
- info->fix = unifb_fix;
- info->var = unifb_default;
- if (clk_set_rate(clk_vga, unifb_default.pixclock))
- return -EINVAL;
- }
- }
-#endif
-
- info->fix.line_length = get_line_length(info->var.xres_virtual,
- info->var.bits_per_pixel);
-
- hSyncStart = info->var.xres + info->var.right_margin;
- hSyncEnd = hSyncStart + info->var.hsync_len;
- hTotal = hSyncEnd + info->var.left_margin;
-
- vSyncStart = info->var.yres + info->var.lower_margin;
- vSyncEnd = vSyncStart + info->var.vsync_len;
- vTotal = vSyncEnd + info->var.upper_margin;
-
- switch (info->var.bits_per_pixel) {
- case 8:
- format = UDE_CFG_DST8;
- break;
- case 16:
- format = UDE_CFG_DST16;
- break;
- case 24:
- format = UDE_CFG_DST24;
- break;
- case 32:
- format = UDE_CFG_DST32;
- break;
- default:
- return -EINVAL;
- }
-
- writel(info->fix.smem_start, UDE_FSA);
- writel(info->var.yres, UDE_LS);
- writel(get_line_length(info->var.xres,
- info->var.bits_per_pixel) >> 3, UDE_PS);
- /* >> 3 for hardware required. */
- writel((hTotal << 16) | (info->var.xres), UDE_HAT);
- writel(((hTotal - 1) << 16) | (info->var.xres - 1), UDE_HBT);
- writel(((hSyncEnd - 1) << 16) | (hSyncStart - 1), UDE_HST);
- writel((vTotal << 16) | (info->var.yres), UDE_VAT);
- writel(((vTotal - 1) << 16) | (info->var.yres - 1), UDE_VBT);
- writel(((vSyncEnd - 1) << 16) | (vSyncStart - 1), UDE_VST);
- writel(UDE_CFG_GDEN_ENABLE | UDE_CFG_TIMEUP_ENABLE
- | format | 0xC0000001, UDE_CFG);
-
- return 0;
-}
-
-/*
- * Set a single color register. The values supplied are already
- * rounded down to the hardware's capabilities (according to the
- * entries in the var structure). Return != 0 for invalid regno.
- */
-static int unifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
- u_int transp, struct fb_info *info)
-{
- if (regno >= 256) /* no. of hw registers */
- return 1;
-
- /* grayscale works only partially under directcolor */
- if (info->var.grayscale) {
- /* grayscale = 0.30*R + 0.59*G + 0.11*B */
- red = green = blue =
- (red * 77 + green * 151 + blue * 28) >> 8;
- }
-
-#define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16)
- switch (info->fix.visual) {
- case FB_VISUAL_TRUECOLOR:
- case FB_VISUAL_PSEUDOCOLOR:
- red = CNVT_TOHW(red, info->var.red.length);
- green = CNVT_TOHW(green, info->var.green.length);
- blue = CNVT_TOHW(blue, info->var.blue.length);
- transp = CNVT_TOHW(transp, info->var.transp.length);
- break;
- case FB_VISUAL_DIRECTCOLOR:
- red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */
- green = CNVT_TOHW(green, 8);
- blue = CNVT_TOHW(blue, 8);
- /* hey, there is bug in transp handling... */
- transp = CNVT_TOHW(transp, 8);
- break;
- }
-#undef CNVT_TOHW
- /* Truecolor has hardware independent palette */
- if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
- u32 v;
-
- if (regno >= 16)
- return 1;
-
- v = (red << info->var.red.offset) |
- (green << info->var.green.offset) |
- (blue << info->var.blue.offset) |
- (transp << info->var.transp.offset);
- switch (info->var.bits_per_pixel) {
- case 8:
- break;
- case 16:
- case 24:
- case 32:
- ((u32 *) (info->pseudo_palette))[regno] = v;
- break;
- default:
- return 1;
- }
- return 0;
- }
- return 0;
-}
-
-/*
- * Pan or Wrap the Display
- *
- * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
- */
-static int unifb_pan_display(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- if (var->vmode & FB_VMODE_YWRAP) {
- if (var->yoffset < 0
- || var->yoffset >= info->var.yres_virtual
- || var->xoffset)
- return -EINVAL;
- } else {
- if (var->xoffset + info->var.xres > info->var.xres_virtual ||
- var->yoffset + info->var.yres > info->var.yres_virtual)
- return -EINVAL;
- }
- info->var.xoffset = var->xoffset;
- info->var.yoffset = var->yoffset;
- if (var->vmode & FB_VMODE_YWRAP)
- info->var.vmode |= FB_VMODE_YWRAP;
- else
- info->var.vmode &= ~FB_VMODE_YWRAP;
- return 0;
-}
-
-int unifb_mmap(struct fb_info *info,
- struct vm_area_struct *vma)
-{
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
-}
-
-static const struct fb_ops unifb_ops = {
- .fb_read = fb_sys_read,
- .fb_write = fb_sys_write,
- .fb_check_var = unifb_check_var,
- .fb_set_par = unifb_set_par,
- .fb_setcolreg = unifb_setcolreg,
- .fb_pan_display = unifb_pan_display,
- .fb_fillrect = unifb_fillrect,
- .fb_copyarea = unifb_copyarea,
- .fb_imageblit = unifb_imageblit,
- .fb_mmap = unifb_mmap,
-};
-
-/*
- * Initialisation
- */
-static int unifb_probe(struct platform_device *dev)
-{
- struct fb_info *info;
- u32 unifb_regs[UNIFB_REGS_NUM];
- int retval = -ENOMEM;
- struct resource *iomem;
- void *videomemory;
-
- videomemory = (void *)__get_free_pages(GFP_KERNEL | __GFP_COMP,
- get_order(UNIFB_MEMSIZE));
- if (!videomemory)
- goto err;
-
- memset(videomemory, 0, UNIFB_MEMSIZE);
-
- unifb_fix.smem_start = virt_to_phys(videomemory);
- unifb_fix.smem_len = UNIFB_MEMSIZE;
-
- iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
- unifb_fix.mmio_start = iomem->start;
-
- info = framebuffer_alloc(sizeof(u32)*256, &dev->dev);
- if (!info)
- goto err;
-
- info->screen_base = (char __iomem *)videomemory;
- info->fbops = &unifb_ops;
-
- retval = fb_find_mode(&info->var, info, NULL,
- unifb_modes, 10, &unifb_modes[0], 16);
-
- if (!retval || (retval == 4))
- info->var = unifb_default;
-
- info->fix = unifb_fix;
- info->pseudo_palette = info->par;
- info->par = NULL;
- info->flags = FBINFO_FLAG_DEFAULT;
-#ifdef FB_ACCEL_PUV3_UNIGFX
- info->fix.accel = FB_ACCEL_PUV3_UNIGFX;
-#endif
-
- retval = fb_alloc_cmap(&info->cmap, 256, 0);
- if (retval < 0)
- goto err1;
-
- retval = register_framebuffer(info);
- if (retval < 0)
- goto err2;
- platform_set_drvdata(dev, info);
- platform_device_add_data(dev, unifb_regs, sizeof(u32) * UNIFB_REGS_NUM);
-
- fb_info(info, "Virtual frame buffer device, using %dM of video memory\n",
- UNIFB_MEMSIZE >> 20);
- return 0;
-err2:
- fb_dealloc_cmap(&info->cmap);
-err1:
- framebuffer_release(info);
-err:
- return retval;
-}
-
-static int unifb_remove(struct platform_device *dev)
-{
- struct fb_info *info = platform_get_drvdata(dev);
-
- if (info) {
- unregister_framebuffer(info);
- fb_dealloc_cmap(&info->cmap);
- framebuffer_release(info);
- }
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int unifb_resume(struct platform_device *dev)
-{
- int rc = 0;
- u32 *unifb_regs = dev->dev.platform_data;
-
- if (dev->dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
- console_lock();
-
- if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- writel(unifb_regs[0], UDE_FSA);
- writel(unifb_regs[1], UDE_LS);
- writel(unifb_regs[2], UDE_PS);
- writel(unifb_regs[3], UDE_HAT);
- writel(unifb_regs[4], UDE_HBT);
- writel(unifb_regs[5], UDE_HST);
- writel(unifb_regs[6], UDE_VAT);
- writel(unifb_regs[7], UDE_VBT);
- writel(unifb_regs[8], UDE_VST);
- writel(unifb_regs[9], UDE_CFG);
- }
- dev->dev.power.power_state = PMSG_ON;
-
- console_unlock();
-
- return rc;
-}
-
-static int unifb_suspend(struct platform_device *dev, pm_message_t mesg)
-{
- u32 *unifb_regs = dev->dev.platform_data;
-
- unifb_regs[0] = readl(UDE_FSA);
- unifb_regs[1] = readl(UDE_LS);
- unifb_regs[2] = readl(UDE_PS);
- unifb_regs[3] = readl(UDE_HAT);
- unifb_regs[4] = readl(UDE_HBT);
- unifb_regs[5] = readl(UDE_HST);
- unifb_regs[6] = readl(UDE_VAT);
- unifb_regs[7] = readl(UDE_VBT);
- unifb_regs[8] = readl(UDE_VST);
- unifb_regs[9] = readl(UDE_CFG);
-
- if (mesg.event == dev->dev.power.power_state.event)
- return 0;
-
- switch (mesg.event) {
- case PM_EVENT_FREEZE: /* about to take snapshot */
- case PM_EVENT_PRETHAW: /* before restoring snapshot */
- goto done;
- }
-
- console_lock();
-
- /* do nothing... */
-
- console_unlock();
-
-done:
- dev->dev.power.power_state = mesg;
-
- return 0;
-}
-#else
-#define unifb_resume NULL
-#define unifb_suspend NULL
-#endif
-
-static struct platform_driver unifb_driver = {
- .probe = unifb_probe,
- .remove = unifb_remove,
- .resume = unifb_resume,
- .suspend = unifb_suspend,
- .driver = {
- .name = "PKUnity-v3-UNIGFX",
- },
-};
-
-static int __init unifb_init(void)
-{
-#ifndef MODULE
- if (fb_get_options("unifb", NULL))
- return -ENODEV;
-#endif
-
- return platform_driver_register(&unifb_driver);
-}
-
-module_init(unifb_init);
-
-static void __exit unifb_exit(void)
-{
- platform_driver_unregister(&unifb_driver);
-}
-
-module_exit(unifb_exit);
-
-MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-22 05:44:13 +0000