summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/serial/cp210x.c189
1 files changed, 170 insertions, 19 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index ee595d1bea0a..3d376c0b6537 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -247,9 +247,9 @@ struct cp210x_serial_private {
#ifdef CONFIG_GPIOLIB
struct gpio_chip gc;
bool gpio_registered;
- u8 gpio_pushpull;
- u8 gpio_altfunc;
- u8 gpio_input;
+ u16 gpio_pushpull;
+ u16 gpio_altfunc;
+ u16 gpio_input;
#endif
u8 partnum;
speed_t min_speed;
@@ -531,19 +531,73 @@ struct cp210x_single_port_config {
#define CP2104_GPIO1_RXLED_MODE BIT(1)
#define CP2104_GPIO2_RS485_MODE BIT(2)
+struct cp210x_quad_port_state {
+ __le16 gpio_mode_pb0;
+ __le16 gpio_mode_pb1;
+ __le16 gpio_mode_pb2;
+ __le16 gpio_mode_pb3;
+ __le16 gpio_mode_pb4;
+
+ __le16 gpio_lowpower_pb0;
+ __le16 gpio_lowpower_pb1;
+ __le16 gpio_lowpower_pb2;
+ __le16 gpio_lowpower_pb3;
+ __le16 gpio_lowpower_pb4;
+
+ __le16 gpio_latch_pb0;
+ __le16 gpio_latch_pb1;
+ __le16 gpio_latch_pb2;
+ __le16 gpio_latch_pb3;
+ __le16 gpio_latch_pb4;
+};
+
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0x49 bytes
+ * on a CP2108 chip.
+ *
+ * See https://www.silabs.com/documents/public/application-notes/an978-cp210x-usb-to-uart-api-specification.pdf
+ */
+struct cp210x_quad_port_config {
+ struct cp210x_quad_port_state reset_state;
+ struct cp210x_quad_port_state suspend_state;
+ u8 ipdelay_ifc[4];
+ u8 enhancedfxn_ifc[4];
+ u8 enhancedfxn_device;
+ u8 extclkfreq[4];
+} __packed;
+
+#define CP2108_EF_IFC_GPIO_TXLED 0x01
+#define CP2108_EF_IFC_GPIO_RXLED 0x02
+#define CP2108_EF_IFC_GPIO_RS485 0x04
+#define CP2108_EF_IFC_GPIO_RS485_LOGIC 0x08
+#define CP2108_EF_IFC_GPIO_CLOCK 0x10
+#define CP2108_EF_IFC_DYNAMIC_SUSPEND 0x40
+
/* CP2102N configuration array indices */
#define CP210X_2NCONFIG_CONFIG_VERSION_IDX 2
#define CP210X_2NCONFIG_GPIO_MODE_IDX 581
#define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX 587
#define CP210X_2NCONFIG_GPIO_CONTROL_IDX 600
-/* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x02 bytes
+ * for CP2102N, CP2103, CP2104 and CP2105.
+ */
struct cp210x_gpio_write {
u8 mask;
u8 state;
};
/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x04 bytes
+ * for CP2108.
+ */
+struct cp210x_gpio_write16 {
+ __le16 mask;
+ __le16 state;
+};
+
+/*
* Helper to get interface number when we only have struct usb_serial.
*/
static u8 cp210x_interface_num(struct usb_serial *serial)
@@ -1414,52 +1468,84 @@ static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct usb_serial *serial = gpiochip_get_data(gc);
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
- u8 req_type = REQTYPE_DEVICE_TO_HOST;
+ u8 req_type;
+ u16 mask;
int result;
- u8 buf;
-
- if (priv->partnum == CP210X_PARTNUM_CP2105)
- req_type = REQTYPE_INTERFACE_TO_HOST;
+ int len;
result = usb_autopm_get_interface(serial->interface);
if (result)
return result;
- result = cp210x_read_vendor_block(serial, req_type,
- CP210X_READ_LATCH, &buf, sizeof(buf));
+ switch (priv->partnum) {
+ case CP210X_PARTNUM_CP2105:
+ req_type = REQTYPE_INTERFACE_TO_HOST;
+ len = 1;
+ break;
+ case CP210X_PARTNUM_CP2108:
+ req_type = REQTYPE_INTERFACE_TO_HOST;
+ len = 2;
+ break;
+ default:
+ req_type = REQTYPE_DEVICE_TO_HOST;
+ len = 1;
+ break;
+ }
+
+ mask = 0;
+ result = cp210x_read_vendor_block(serial, req_type, CP210X_READ_LATCH,
+ &mask, len);
+
usb_autopm_put_interface(serial->interface);
+
if (result < 0)
return result;
- return !!(buf & BIT(gpio));
+ le16_to_cpus(&mask);
+
+ return !!(mask & BIT(gpio));
}
static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
struct usb_serial *serial = gpiochip_get_data(gc);
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ struct cp210x_gpio_write16 buf16;
struct cp210x_gpio_write buf;
+ u16 mask, state;
+ u16 wIndex;
int result;
if (value == 1)
- buf.state = BIT(gpio);
+ state = BIT(gpio);
else
- buf.state = 0;
+ state = 0;
- buf.mask = BIT(gpio);
+ mask = BIT(gpio);
result = usb_autopm_get_interface(serial->interface);
if (result)
goto out;
- if (priv->partnum == CP210X_PARTNUM_CP2105) {
+ switch (priv->partnum) {
+ case CP210X_PARTNUM_CP2105:
+ buf.mask = (u8)mask;
+ buf.state = (u8)state;
result = cp210x_write_vendor_block(serial,
REQTYPE_HOST_TO_INTERFACE,
CP210X_WRITE_LATCH, &buf,
sizeof(buf));
- } else {
- u16 wIndex = buf.state << 8 | buf.mask;
-
+ break;
+ case CP210X_PARTNUM_CP2108:
+ buf16.mask = cpu_to_le16(mask);
+ buf16.state = cpu_to_le16(state);
+ result = cp210x_write_vendor_block(serial,
+ REQTYPE_HOST_TO_INTERFACE,
+ CP210X_WRITE_LATCH, &buf16,
+ sizeof(buf16));
+ break;
+ default:
+ wIndex = state << 8 | mask;
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
CP210X_VENDOR_SPECIFIC,
@@ -1467,6 +1553,7 @@ static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
CP210X_WRITE_LATCH,
wIndex,
NULL, 0, USB_CTRL_SET_TIMEOUT);
+ break;
}
usb_autopm_put_interface(serial->interface);
@@ -1676,6 +1763,61 @@ static int cp2104_gpioconf_init(struct usb_serial *serial)
return 0;
}
+static int cp2108_gpio_init(struct usb_serial *serial)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ struct cp210x_quad_port_config config;
+ u16 gpio_latch;
+ int result;
+ u8 i;
+
+ result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+ CP210X_GET_PORTCONFIG, &config,
+ sizeof(config));
+ if (result < 0)
+ return result;
+
+ priv->gc.ngpio = 16;
+ priv->gpio_pushpull = le16_to_cpu(config.reset_state.gpio_mode_pb1);
+ gpio_latch = le16_to_cpu(config.reset_state.gpio_latch_pb1);
+
+ /*
+ * Mark all pins which are not in GPIO mode.
+ *
+ * Refer to table 9.1 "GPIO Mode alternate Functions" in the datasheet:
+ * https://www.silabs.com/documents/public/data-sheets/cp2108-datasheet.pdf
+ *
+ * Alternate functions of GPIO0 to GPIO3 are determine by enhancedfxn_ifc[0]
+ * and the similarly for the other pins; enhancedfxn_ifc[1]: GPIO4 to GPIO7,
+ * enhancedfxn_ifc[2]: GPIO8 to GPIO11, enhancedfxn_ifc[3]: GPIO12 to GPIO15.
+ */
+ for (i = 0; i < 4; i++) {
+ if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_TXLED)
+ priv->gpio_altfunc |= BIT(i * 4);
+ if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_RXLED)
+ priv->gpio_altfunc |= BIT((i * 4) + 1);
+ if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_RS485)
+ priv->gpio_altfunc |= BIT((i * 4) + 2);
+ if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_CLOCK)
+ priv->gpio_altfunc |= BIT((i * 4) + 3);
+ }
+
+ /*
+ * Like CP2102N, CP2108 has also no strict input and output pin
+ * modes. Do the same input mode emulation as CP2102N.
+ */
+ for (i = 0; i < priv->gc.ngpio; ++i) {
+ /*
+ * Set direction to "input" iff pin is open-drain and reset
+ * value is 1.
+ */
+ if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
+ priv->gpio_input |= BIT(i);
+ }
+
+ return 0;
+}
+
static int cp2102n_gpioconf_init(struct usb_serial *serial)
{
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
@@ -1780,6 +1922,15 @@ static int cp210x_gpio_init(struct usb_serial *serial)
case CP210X_PARTNUM_CP2105:
result = cp2105_gpioconf_init(serial);
break;
+ case CP210X_PARTNUM_CP2108:
+ /*
+ * The GPIOs are not tied to any specific port so only register
+ * once for interface 0.
+ */
+ if (cp210x_interface_num(serial) != 0)
+ return 0;
+ result = cp2108_gpio_init(serial);
+ break;
case CP210X_PARTNUM_CP2102N_QFN28:
case CP210X_PARTNUM_CP2102N_QFN24:
case CP210X_PARTNUM_CP2102N_QFN20:
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-21 07:45:20 +0000