diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/gadget/pxa2xx_udc.c | 88 | ||||
-rw-r--r-- | drivers/usb/gadget/pxa2xx_udc.h | 4 |
2 files changed, 53 insertions, 39 deletions
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 4402d6f042d9..096c41cc40d1 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -103,6 +103,12 @@ static const char ep0name [] = "ep0"; #error "Can't configure both IXP and PXA" #endif +/* IXP doesn't yet support <linux/clk.h> */ +#define clk_get(dev,name) NULL +#define clk_enable(clk) do { } while (0) +#define clk_disable(clk) do { } while (0) +#define clk_put(clk) do { } while (0) + #endif #include "pxa2xx_udc.h" @@ -934,20 +940,31 @@ static void udc_disable(struct pxa2xx_udc *); /* We disable the UDC -- and its 48 MHz clock -- whenever it's not * in active use. */ -static int pullup(struct pxa2xx_udc *udc, int is_active) +static int pullup(struct pxa2xx_udc *udc) { - is_active = is_active && udc->vbus && udc->pullup; + int is_active = udc->vbus && udc->pullup && !udc->suspended; DMSG("%s\n", is_active ? "active" : "inactive"); - if (is_active) - udc_enable(udc); - else { - if (udc->gadget.speed != USB_SPEED_UNKNOWN) { - DMSG("disconnect %s\n", udc->driver - ? udc->driver->driver.name - : "(no driver)"); - stop_activity(udc, udc->driver); + if (is_active) { + if (!udc->active) { + udc->active = 1; + /* Enable clock for USB device */ + clk_enable(udc->clk); + udc_enable(udc); } - udc_disable(udc); + } else { + if (udc->active) { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + DMSG("disconnect %s\n", udc->driver + ? udc->driver->driver.name + : "(no driver)"); + stop_activity(udc, udc->driver); + } + udc_disable(udc); + /* Disable clock for USB device */ + clk_disable(udc->clk); + udc->active = 0; + } + } return 0; } @@ -958,9 +975,9 @@ static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active) struct pxa2xx_udc *udc; udc = container_of(_gadget, struct pxa2xx_udc, gadget); - udc->vbus = is_active = (is_active != 0); + udc->vbus = (is_active != 0); DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); - pullup(udc, is_active); + pullup(udc); return 0; } @@ -975,9 +992,8 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) if (!udc->mach->gpio_pullup && !udc->mach->udc_command) return -EOPNOTSUPP; - is_active = (is_active != 0); - udc->pullup = is_active; - pullup(udc, is_active); + udc->pullup = (is_active != 0); + pullup(udc); return 0; } @@ -997,7 +1013,7 @@ static const struct usb_gadget_ops pxa2xx_udc_ops = { #ifdef CONFIG_USB_GADGET_DEBUG_FS static int -udc_seq_show(struct seq_file *m, void *d) +udc_seq_show(struct seq_file *m, void *_d) { struct pxa2xx_udc *dev = m->private; unsigned long flags; @@ -1146,11 +1162,6 @@ static void udc_disable(struct pxa2xx_udc *dev) udc_clear_mask_UDCCR(UDCCR_UDE); -#ifdef CONFIG_ARCH_PXA - /* Disable clock for USB device */ - clk_disable(dev->clk); -#endif - ep0_idle (dev); dev->gadget.speed = USB_SPEED_UNKNOWN; } @@ -1191,11 +1202,6 @@ static void udc_enable (struct pxa2xx_udc *dev) { udc_clear_mask_UDCCR(UDCCR_UDE); -#ifdef CONFIG_ARCH_PXA - /* Enable clock for USB device */ - clk_enable(dev->clk); -#endif - /* try to clear these bits before we enable the udc */ udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); @@ -1286,7 +1292,7 @@ fail: * for set_configuration as well as eventual disconnect. */ DMSG("registered gadget driver '%s'\n", driver->driver.name); - pullup(dev, 1); + pullup(dev); dump_state(dev); return 0; } @@ -1329,7 +1335,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) return -EINVAL; local_irq_disable(); - pullup(dev, 0); + dev->pullup = 0; + pullup(dev); stop_activity(dev, driver); local_irq_enable(); @@ -2131,13 +2138,11 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; -#ifdef CONFIG_ARCH_PXA dev->clk = clk_get(&pdev->dev, "UDCCLK"); if (IS_ERR(dev->clk)) { retval = PTR_ERR(dev->clk); goto err_clk; } -#endif pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, dev->has_cfr ? "" : " (!cfr)", @@ -2250,10 +2255,8 @@ lubbock_fail0: if (dev->mach->gpio_vbus) gpio_free(dev->mach->gpio_vbus); err_gpio_vbus: -#ifdef CONFIG_ARCH_PXA clk_put(dev->clk); err_clk: -#endif return retval; } @@ -2269,7 +2272,9 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) if (dev->driver) return -EBUSY; - udc_disable(dev); + dev->pullup = 0; + pullup(dev); + remove_debug_files(dev); if (dev->got_irq) { @@ -2289,9 +2294,7 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) if (dev->mach->gpio_pullup) gpio_free(dev->mach->gpio_pullup); -#ifdef CONFIG_ARCH_PXA clk_put(dev->clk); -#endif platform_set_drvdata(pdev, NULL); the_controller = NULL; @@ -2317,10 +2320,15 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) { struct pxa2xx_udc *udc = platform_get_drvdata(dev); + unsigned long flags; if (!udc->mach->gpio_pullup && !udc->mach->udc_command) WARN("USB host won't detect disconnect!\n"); - pullup(udc, 0); + udc->suspended = 1; + + local_irq_save(flags); + pullup(udc); + local_irq_restore(flags); return 0; } @@ -2328,8 +2336,12 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) static int pxa2xx_udc_resume(struct platform_device *dev) { struct pxa2xx_udc *udc = platform_get_drvdata(dev); + unsigned long flags; - pullup(udc, 1); + udc->suspended = 0; + local_irq_save(flags); + pullup(udc); + local_irq_restore(flags); return 0; } diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index b67e3ff5e4eb..e2c19e88c875 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -119,7 +119,9 @@ struct pxa2xx_udc { has_cfr : 1, req_pending : 1, req_std : 1, - req_config : 1; + req_config : 1, + suspended : 1, + active : 1; #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) struct timer_list timer; |