diff options
Diffstat (limited to 'drivers/usb/phy/phy-fsl-usb.c')
| -rw-r--r-- | drivers/usb/phy/phy-fsl-usb.c | 96 |
1 files changed, 76 insertions, 20 deletions
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index fa7c9f9628b5..7f3c73b967ce 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -134,7 +134,7 @@ int write_ulpi(u8 addr, u8 data) /* Operations that will be called from OTG Finite State Machine */ /* Charge vbus for vbus pulsing in SRP */ -void fsl_otg_chrg_vbus(int on) +void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on) { u32 tmp; @@ -170,7 +170,7 @@ void fsl_otg_dischrg_vbus(int on) } /* A-device driver vbus, controlled through PP bit in PORTSC */ -void fsl_otg_drv_vbus(int on) +void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on) { u32 tmp; @@ -188,7 +188,7 @@ void fsl_otg_drv_vbus(int on) * Pull-up D+, signalling connect by periperal. Also used in * data-line pulsing in SRP */ -void fsl_otg_loc_conn(int on) +void fsl_otg_loc_conn(struct otg_fsm *fsm, int on) { u32 tmp; @@ -207,7 +207,7 @@ void fsl_otg_loc_conn(int on) * port. In host mode, controller will automatically send SOF. * Suspend will block the data on the port. */ -void fsl_otg_loc_sof(int on) +void fsl_otg_loc_sof(struct otg_fsm *fsm, int on) { u32 tmp; @@ -222,7 +222,7 @@ void fsl_otg_loc_sof(int on) } /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */ -void fsl_otg_start_pulse(void) +void fsl_otg_start_pulse(struct otg_fsm *fsm) { u32 tmp; @@ -235,7 +235,7 @@ void fsl_otg_start_pulse(void) fsl_otg_loc_conn(1); #endif - fsl_otg_add_timer(b_data_pulse_tmr); + fsl_otg_add_timer(fsm, b_data_pulse_tmr); } void b_data_pulse_end(unsigned long foo) @@ -252,14 +252,14 @@ void b_data_pulse_end(unsigned long foo) void fsl_otg_pulse_vbus(void) { srp_wait_done = 0; - fsl_otg_chrg_vbus(1); + fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1); /* start the timer to end vbus charge */ - fsl_otg_add_timer(b_vbus_pulse_tmr); + fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr); } void b_vbus_pulse_end(unsigned long foo) { - fsl_otg_chrg_vbus(0); + fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0); /* * As USB3300 using the same a_sess_vld and b_sess_vld voltage @@ -267,7 +267,7 @@ void b_vbus_pulse_end(unsigned long foo) * residual voltage of vbus pulsing and A device pull up */ fsl_otg_dischrg_vbus(1); - fsl_otg_add_timer(b_srp_wait_tmr); + fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr); } void b_srp_end(unsigned long foo) @@ -289,7 +289,7 @@ void a_wait_enum(unsigned long foo) { VDBG("a_wait_enum timeout\n"); if (!fsl_otg_dev->phy.otg->host->b_hnp_enable) - fsl_otg_add_timer(a_wait_enum_tmr); + fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr); else otg_statemachine(&fsl_otg_dev->fsm); } @@ -375,8 +375,42 @@ void fsl_otg_uninit_timers(void) kfree(b_vbus_pulse_tmr); } +static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t) +{ + struct fsl_otg_timer *timer; + + /* REVISIT: use array of pointers to timers instead */ + switch (t) { + case A_WAIT_VRISE: + timer = a_wait_vrise_tmr; + break; + case A_WAIT_BCON: + timer = a_wait_vrise_tmr; + break; + case A_AIDL_BDIS: + timer = a_wait_vrise_tmr; + break; + case B_ASE0_BRST: + timer = a_wait_vrise_tmr; + break; + case B_SE0_SRP: + timer = a_wait_vrise_tmr; + break; + case B_SRP_FAIL: + timer = a_wait_vrise_tmr; + break; + case A_WAIT_ENUM: + timer = a_wait_vrise_tmr; + break; + default: + timer = NULL; + } + + return timer; +} + /* Add timer to timer list */ -void fsl_otg_add_timer(void *gtimer) +void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer) { struct fsl_otg_timer *timer = gtimer; struct fsl_otg_timer *tmp_timer; @@ -394,8 +428,19 @@ void fsl_otg_add_timer(void *gtimer) list_add_tail(&timer->list, &active_timers); } +static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) +{ + struct fsl_otg_timer *timer; + + timer = fsl_otg_get_timer(t); + if (!timer) + return; + + fsl_otg_add_timer(fsm, timer); +} + /* Remove timer from the timer list; clear timeout status */ -void fsl_otg_del_timer(void *gtimer) +void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer) { struct fsl_otg_timer *timer = gtimer; struct fsl_otg_timer *tmp_timer, *del_tmp; @@ -405,6 +450,17 @@ void fsl_otg_del_timer(void *gtimer) list_del(&timer->list); } +static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) +{ + struct fsl_otg_timer *timer; + + timer = fsl_otg_get_timer(t); + if (!timer) + return; + + fsl_otg_del_timer(fsm, timer); +} + /* * Reduce timer count by 1, and find timeout conditions. * Called by fsl_otg 1ms timer interrupt @@ -468,7 +524,7 @@ int fsl_otg_start_host(struct otg_fsm *fsm, int on) retval = dev->driver->pm->resume(dev); if (fsm->id) { /* default-b */ - fsl_otg_drv_vbus(1); + fsl_otg_drv_vbus(fsm, 1); /* * Workaround: b_host can't driver * vbus, but PP in PORTSC needs to @@ -493,7 +549,7 @@ int fsl_otg_start_host(struct otg_fsm *fsm, int on) retval = dev->driver->pm->suspend(dev); if (fsm->id) /* default-b */ - fsl_otg_drv_vbus(0); + fsl_otg_drv_vbus(fsm, 0); } otg_dev->host_working = 0; } @@ -757,8 +813,8 @@ static struct otg_fsm_ops fsl_otg_ops = { .loc_sof = fsl_otg_loc_sof, .start_pulse = fsl_otg_start_pulse, - .add_timer = fsl_otg_add_timer, - .del_timer = fsl_otg_del_timer, + .add_timer = fsl_otg_fsm_add_timer, + .del_timer = fsl_otg_fsm_del_timer, .start_host = fsl_otg_start_host, .start_gadget = fsl_otg_start_gadget, @@ -1011,7 +1067,7 @@ static int show_fsl_usb2_otg_state(struct device *dev, "b_bus_suspend: %d\n" "b_conn: %d\n" "b_se0_srp: %d\n" - "b_sess_end: %d\n" + "b_ssend_srp: %d\n" "b_sess_vld: %d\n" "id: %d\n", fsm->a_bus_req, @@ -1026,7 +1082,7 @@ static int show_fsl_usb2_otg_state(struct device *dev, fsm->b_bus_suspend, fsm->b_conn, fsm->b_se0_srp, - fsm->b_sess_end, + fsm->b_ssend_srp, fsm->b_sess_vld, fsm->id); size -= t; @@ -1057,7 +1113,7 @@ static long fsl_otg_ioctl(struct file *file, unsigned int cmd, break; case SET_A_SUSPEND_REQ: - fsl_otg_dev->fsm.a_suspend_req = arg; + fsl_otg_dev->fsm.a_suspend_req_inf = arg; break; case SET_A_BUS_DROP: |