diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/imx.c | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 225922c7ce99..6b98a524eca2 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -102,6 +102,7 @@ #define UCR2_STPB (1<<6) /* Stop */ #define UCR2_WS (1<<5) /* Word size */ #define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_ATEN (1<<3) /* Aging Timer Enable */ #define UCR2_TXEN (1<<2) /* Transmitter enabled */ #define UCR2_RXEN (1<<1) /* Receiver enabled */ #define UCR2_SRST (1<<0) /* SW reset */ @@ -1109,6 +1110,70 @@ imx_verify_port(struct uart_port *port, struct serial_struct *ser) return ret; } +#if defined(CONFIG_CONSOLE_POLL) +static int imx_poll_get_char(struct uart_port *port) +{ + struct imx_port_ucrs old_ucr; + unsigned int status; + unsigned char c; + + /* save control registers */ + imx_port_ucrs_save(port, &old_ucr); + + /* disable interrupts */ + writel(UCR1_UARTEN, port->membase + UCR1); + writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI), + port->membase + UCR2); + writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN), + port->membase + UCR3); + + /* poll */ + do { + status = readl(port->membase + USR2); + } while (~status & USR2_RDR); + + /* read */ + c = readl(port->membase + URXD0); + + /* restore control registers */ + imx_port_ucrs_restore(port, &old_ucr); + + return c; +} + +static void imx_poll_put_char(struct uart_port *port, unsigned char c) +{ + struct imx_port_ucrs old_ucr; + unsigned int status; + + /* save control registers */ + imx_port_ucrs_save(port, &old_ucr); + + /* disable interrupts */ + writel(UCR1_UARTEN, port->membase + UCR1); + writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI), + port->membase + UCR2); + writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN), + port->membase + UCR3); + + /* drain */ + do { + status = readl(port->membase + USR1); + } while (~status & USR1_TRDY); + + /* write */ + writel(c, port->membase + URTX0); + + /* flush */ + do { + status = readl(port->membase + USR2); + } while (~status & USR2_TXDC); + + /* restore control registers */ + imx_port_ucrs_restore(port, &old_ucr); +} +#endif + static struct uart_ops imx_pops = { .tx_empty = imx_tx_empty, .set_mctrl = imx_set_mctrl, @@ -1126,6 +1191,10 @@ static struct uart_ops imx_pops = { .request_port = imx_request_port, .config_port = imx_config_port, .verify_port = imx_verify_port, +#if defined(CONFIG_CONSOLE_POLL) + .poll_get_char = imx_poll_get_char, + .poll_put_char = imx_poll_put_char, +#endif }; static struct imx_port *imx_ports[UART_NR]; |