diff options
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/8250/8250.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/of_serial.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/pch_uart.c | 59 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 6 |
5 files changed, 55 insertions, 23 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 6e1958a325bd..8123f784bcda 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -282,6 +282,14 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR, }, + [PORT_LPC3220] = { + .name = "LPC3220", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO | + UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 5410c0637266..34e71874a892 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -208,6 +208,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = { { .compatible = "ns16750", .data = (void *)PORT_16750, }, { .compatible = "ns16850", .data = (void *)PORT_16850, }, { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, }, + { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, }, #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL { .compatible = "ibm,qpace-nwp-serial", .data = (void *)PORT_NWPSERIAL, }, diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 4fdec6a6b758..558ce8509a9a 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -253,6 +253,9 @@ struct eg20t_port { dma_addr_t rx_buf_dma; struct dentry *debugfs; + + /* protect the eg20t_port private structure and io access to membase */ + spinlock_t lock; }; /** @@ -754,7 +757,8 @@ static void pch_dma_rx_complete(void *arg) tty_flip_buffer_push(tty); tty_kref_put(tty); async_tx_ack(priv->desc_rx); - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } static void pch_dma_tx_complete(void *arg) @@ -809,7 +813,8 @@ static int handle_rx_to(struct eg20t_port *priv) int rx_size; int ret; if (!priv->start_rx) { - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); return 0; } buf = &priv->rxbuf; @@ -1058,7 +1063,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) int next = 1; u8 msr; - spin_lock_irqsave(&priv->port.lock, flags); + spin_lock_irqsave(&priv->lock, flags); handled = 0; while (next) { iid = pch_uart_hal_get_iid(priv); @@ -1078,11 +1083,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) case PCH_UART_IID_RDR: /* Received Data Ready */ if (priv->use_dma) { pch_uart_hal_disable_interrupt(priv, - PCH_UART_HAL_RX_INT); + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); ret = dma_handle_rx(priv); if (!ret) pch_uart_hal_enable_interrupt(priv, - PCH_UART_HAL_RX_INT); + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } else { ret = handle_rx(priv); } @@ -1116,7 +1123,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) handled |= (unsigned int)ret; } - spin_unlock_irqrestore(&priv->port.lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); return IRQ_RETVAL(handled); } @@ -1208,7 +1215,8 @@ static void pch_uart_stop_rx(struct uart_port *port) struct eg20t_port *priv; priv = container_of(port, struct eg20t_port, port); priv->start_rx = 0; - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } /* Enable the modem status interrupts. */ @@ -1226,9 +1234,9 @@ static void pch_uart_break_ctl(struct uart_port *port, int ctl) unsigned long flags; priv = container_of(port, struct eg20t_port, port); - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&priv->lock, flags); pch_uart_hal_set_break(priv, ctl); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); } /* Grab any interrupt resources and initialise any low level driver state. */ @@ -1263,6 +1271,7 @@ static int pch_uart_startup(struct uart_port *port) break; case 16: fifo_size = PCH_UART_HAL_FIFO16; + break; case 1: default: fifo_size = PCH_UART_HAL_FIFO_DIS; @@ -1300,7 +1309,8 @@ static int pch_uart_startup(struct uart_port *port) pch_request_dma(port); priv->start_rx = 1; - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); uart_update_timeout(port, CS8, default_baud); return 0; @@ -1358,7 +1368,7 @@ static void pch_uart_set_termios(struct uart_port *port, stb = PCH_UART_HAL_STB1; if (termios->c_cflag & PARENB) { - if (!(termios->c_cflag & PARODD)) + if (termios->c_cflag & PARODD) parity = PCH_UART_HAL_PARITY_ODD; else parity = PCH_UART_HAL_PARITY_EVEN; @@ -1376,7 +1386,8 @@ static void pch_uart_set_termios(struct uart_port *port, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&priv->lock, flags); + spin_lock(&port->lock); uart_update_timeout(port, termios->c_cflag, baud); rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb); @@ -1389,7 +1400,8 @@ static void pch_uart_set_termios(struct uart_port *port, tty_termios_encode_baud_rate(termios, baud, baud); out: - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock(&port->lock); + spin_unlock_irqrestore(&priv->lock, flags); } static const char *pch_uart_type(struct uart_port *port) @@ -1538,8 +1550,9 @@ pch_console_write(struct console *co, const char *s, unsigned int count) { struct eg20t_port *priv; unsigned long flags; + int priv_locked = 1; + int port_locked = 1; u8 ier; - int locked = 1; priv = pch_uart_ports[co->index]; @@ -1547,12 +1560,16 @@ pch_console_write(struct console *co, const char *s, unsigned int count) local_irq_save(flags); if (priv->port.sysrq) { - /* serial8250_handle_port() already took the lock */ - locked = 0; + spin_lock(&priv->lock); + /* serial8250_handle_port() already took the port lock */ + port_locked = 0; } else if (oops_in_progress) { - locked = spin_trylock(&priv->port.lock); - } else + priv_locked = spin_trylock(&priv->lock); + port_locked = spin_trylock(&priv->port.lock); + } else { + spin_lock(&priv->lock); spin_lock(&priv->port.lock); + } /* * First save the IER then disable the interrupts @@ -1570,8 +1587,10 @@ pch_console_write(struct console *co, const char *s, unsigned int count) wait_for_xmitr(priv, BOTH_EMPTY); iowrite8(ier, priv->membase + UART_IER); - if (locked) + if (port_locked) spin_unlock(&priv->port.lock); + if (priv_locked) + spin_unlock(&priv->lock); local_irq_restore(flags); } @@ -1669,6 +1688,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, pci_enable_msi(pdev); pci_set_master(pdev); + spin_lock_init(&priv->lock); + iobase = pci_resource_start(pdev, 0); mapbase = pci_resource_start(pdev, 1); priv->mapbase = mapbase; diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index d8b0aee35632..02d07bfcfa8a 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1014,10 +1014,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, * a disturbance in the clock-rate over the change. */ - if (IS_ERR(port->clk)) + if (IS_ERR(port->baudclk)) goto exit; - if (port->baudclk_rate == clk_get_rate(port->clk)) + if (port->baudclk_rate == clk_get_rate(port->baudclk)) goto exit; if (val == CPUFREQ_PRECHANGE) { diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 246b823c1b27..a21dc8e3b7c0 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2527,14 +2527,16 @@ void uart_insert_char(struct uart_port *port, unsigned int status, struct tty_struct *tty = port->state->port.tty; if ((status & port->ignore_status_mask & ~overrun) == 0) - tty_insert_flip_char(tty, ch, flag); + if (tty_insert_flip_char(tty, ch, flag) == 0) + ++port->icount.buf_overrun; /* * Overrun is special. Since it's reported immediately, * it doesn't affect the current character. */ if (status & ~port->ignore_status_mask & overrun) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + if (tty_insert_flip_char(tty, 0, TTY_OVERRUN) == 0) + ++port->icount.buf_overrun; } EXPORT_SYMBOL_GPL(uart_insert_char); |