diff options
Diffstat (limited to 'drivers/tty/serial/bfin_sport_uart.h')
| -rw-r--r-- | drivers/tty/serial/bfin_sport_uart.h | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h new file mode 100644 index 000000000000..6d06ce1d5675 --- /dev/null +++ b/drivers/tty/serial/bfin_sport_uart.h @@ -0,0 +1,86 @@ +/* + * Blackfin On-Chip Sport Emulated UART Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +/* + * This driver and the hardware supported are in term of EE-191 of ADI. + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf + * This application note describe how to implement a UART on a Sharc DSP, + * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. + */ + +#ifndef _BFIN_SPORT_UART_H +#define _BFIN_SPORT_UART_H + +#define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ +#define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ +#define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */ +#define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */ +#define OFFSET_TX 0x10 /* Transmit Data Register */ +#define OFFSET_RX 0x18 /* Receive Data Register */ +#define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */ +#define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */ +#define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */ +#define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */ +#define OFFSET_STAT 0x30 /* Status Register */ + +#define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1)) +#define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2)) +#define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV)) +#define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV)) +#define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX)) +#define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX)) +/* + * If another interrupt fires while doing a 32-bit read from RX FIFO, + * a fake RX underflow error will be generated. So disable interrupts + * to prevent interruption while reading the FIFO. + */ +#define SPORT_GET_RX32(sport) \ +({ \ + unsigned int __ret; \ + if (ANOMALY_05000473) \ + local_irq_disable(); \ + __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \ + if (ANOMALY_05000473) \ + local_irq_enable(); \ + __ret; \ +}) +#define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1)) +#define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2)) +#define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV)) +#define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV)) +#define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT)) + +#define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v) +#define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v) +#define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v) +#define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v) +#define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v) +#define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v) +#define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v) +#define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v) +#define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) +#define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) +#define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) + +#define SPORT_TX_FIFO_SIZE 8 + +#define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) + +#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS) +# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS +#endif + +#endif /* _BFIN_SPORT_UART_H */ |