summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/amba-pl011.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/amba-pl011.c')
-rw-r--r--drivers/tty/serial/amba-pl011.c341
1 files changed, 221 insertions, 120 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 899a77187bde..c0da0ccbbcf5 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -60,6 +60,8 @@
#include <linux/io.h>
#include <linux/acpi.h>
+#include "amba-pl011.h"
+
#define UART_NR 14
#define SERIAL_AMBA_MAJOR 204
@@ -71,11 +73,27 @@
#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
#define UART_DUMMY_DR_RX (1 << 16)
+static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
+ [REG_DR] = UART01x_DR,
+ [REG_FR] = UART01x_FR,
+ [REG_LCRH_RX] = UART011_LCRH,
+ [REG_LCRH_TX] = UART011_LCRH,
+ [REG_IBRD] = UART011_IBRD,
+ [REG_FBRD] = UART011_FBRD,
+ [REG_CR] = UART011_CR,
+ [REG_IFLS] = UART011_IFLS,
+ [REG_IMSC] = UART011_IMSC,
+ [REG_RIS] = UART011_RIS,
+ [REG_MIS] = UART011_MIS,
+ [REG_ICR] = UART011_ICR,
+ [REG_DMACR] = UART011_DMACR,
+};
+
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
+ const u16 *reg_offset;
unsigned int ifls;
- unsigned int lcrh_tx;
- unsigned int lcrh_rx;
+ bool access_32b;
bool oversampling;
bool dma_threshold;
bool cts_event_workaround;
@@ -91,9 +109,8 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
}
static struct vendor_data vendor_arm = {
+ .reg_offset = pl011_std_offsets,
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- .lcrh_tx = UART011_LCRH,
- .lcrh_rx = UART011_LCRH,
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
@@ -103,6 +120,7 @@ static struct vendor_data vendor_arm = {
};
static struct vendor_data vendor_sbsa = {
+ .reg_offset = pl011_std_offsets,
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
@@ -110,15 +128,41 @@ static struct vendor_data vendor_sbsa = {
.fixed_options = true,
};
+static u16 pl011_st_offsets[REG_ARRAY_SIZE] = {
+ [REG_DR] = UART01x_DR,
+ [REG_ST_DMAWM] = ST_UART011_DMAWM,
+ [REG_ST_TIMEOUT] = ST_UART011_TIMEOUT,
+ [REG_FR] = UART01x_FR,
+ [REG_LCRH_RX] = ST_UART011_LCRH_RX,
+ [REG_LCRH_TX] = ST_UART011_LCRH_TX,
+ [REG_IBRD] = UART011_IBRD,
+ [REG_FBRD] = UART011_FBRD,
+ [REG_CR] = UART011_CR,
+ [REG_IFLS] = UART011_IFLS,
+ [REG_IMSC] = UART011_IMSC,
+ [REG_RIS] = UART011_RIS,
+ [REG_MIS] = UART011_MIS,
+ [REG_ICR] = UART011_ICR,
+ [REG_DMACR] = UART011_DMACR,
+ [REG_ST_XFCR] = ST_UART011_XFCR,
+ [REG_ST_XON1] = ST_UART011_XON1,
+ [REG_ST_XON2] = ST_UART011_XON2,
+ [REG_ST_XOFF1] = ST_UART011_XOFF1,
+ [REG_ST_XOFF2] = ST_UART011_XOFF2,
+ [REG_ST_ITCR] = ST_UART011_ITCR,
+ [REG_ST_ITIP] = ST_UART011_ITIP,
+ [REG_ST_ABCR] = ST_UART011_ABCR,
+ [REG_ST_ABIMSC] = ST_UART011_ABIMSC,
+};
+
static unsigned int get_fifosize_st(struct amba_device *dev)
{
return 64;
}
static struct vendor_data vendor_st = {
+ .reg_offset = pl011_st_offsets,
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
- .lcrh_tx = ST_UART011_LCRH_TX,
- .lcrh_rx = ST_UART011_LCRH_RX,
.oversampling = true,
.dma_threshold = true,
.cts_event_workaround = true,
@@ -127,6 +171,29 @@ static struct vendor_data vendor_st = {
.get_fifosize = get_fifosize_st,
};
+static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = {
+ [REG_DR] = ZX_UART011_DR,
+ [REG_FR] = ZX_UART011_FR,
+ [REG_LCRH_RX] = ZX_UART011_LCRH,
+ [REG_LCRH_TX] = ZX_UART011_LCRH,
+ [REG_IBRD] = ZX_UART011_IBRD,
+ [REG_FBRD] = ZX_UART011_FBRD,
+ [REG_CR] = ZX_UART011_CR,
+ [REG_IFLS] = ZX_UART011_IFLS,
+ [REG_IMSC] = ZX_UART011_IMSC,
+ [REG_RIS] = ZX_UART011_RIS,
+ [REG_MIS] = ZX_UART011_MIS,
+ [REG_ICR] = ZX_UART011_ICR,
+ [REG_DMACR] = ZX_UART011_DMACR,
+};
+
+static struct vendor_data vendor_zte = {
+ .reg_offset = pl011_zte_offsets,
+ .access_32b = true,
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .get_fifosize = get_fifosize_arm,
+};
+
/* Deals with DMA transactions */
struct pl011_sgbuf {
@@ -162,14 +229,13 @@ struct pl011_dmatx_data {
*/
struct uart_amba_port {
struct uart_port port;
+ const u16 *reg_offset;
struct clk *clk;
const struct vendor_data *vendor;
unsigned int dmacr; /* dma control reg */
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
- unsigned int lcrh_tx; /* vendor-specific */
- unsigned int lcrh_rx; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
bool autorts;
unsigned int fixed_baud; /* vendor-set fixed baud rate */
@@ -184,6 +250,32 @@ struct uart_amba_port {
#endif
};
+static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap,
+ unsigned int reg)
+{
+ return uap->reg_offset[reg];
+}
+
+static unsigned int pl011_read(const struct uart_amba_port *uap,
+ unsigned int reg)
+{
+ void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);
+
+ return (uap->port.iotype == UPIO_MEM32) ?
+ readl_relaxed(addr) : readw_relaxed(addr);
+}
+
+static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
+ unsigned int reg)
+{
+ void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);
+
+ if (uap->port.iotype == UPIO_MEM32)
+ writel_relaxed(val, addr);
+ else
+ writew_relaxed(val, addr);
+}
+
/*
* Reads up to 256 characters from the FIFO or until it's empty and
* inserts them into the TTY layer. Returns the number of characters
@@ -196,13 +288,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
int fifotaken = 0;
while (max_count--) {
- status = readw(uap->port.membase + UART01x_FR);
+ status = pl011_read(uap, REG_FR);
if (status & UART01x_FR_RXFE)
break;
/* Take chars from the FIFO and update status */
- ch = readw(uap->port.membase + UART01x_DR) |
- UART_DUMMY_DR_RX;
+ ch = pl011_read(uap, REG_DR) | UART_DUMMY_DR_RX;
flag = TTY_NORMAL;
uap->port.icount.rx++;
fifotaken++;
@@ -284,7 +375,8 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev);
struct device *dev = uap->port.dev;
struct dma_slave_config tx_conf = {
- .dst_addr = uap->port.mapbase + UART01x_DR,
+ .dst_addr = uap->port.mapbase +
+ pl011_reg_to_offset(uap, REG_DR),
.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.direction = DMA_MEM_TO_DEV,
.dst_maxburst = uap->fifosize >> 1,
@@ -339,7 +431,8 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
if (chan) {
struct dma_slave_config rx_conf = {
- .src_addr = uap->port.mapbase + UART01x_DR,
+ .src_addr = uap->port.mapbase +
+ pl011_reg_to_offset(uap, REG_DR),
.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.direction = DMA_DEV_TO_MEM,
.src_maxburst = uap->fifosize >> 2,
@@ -438,7 +531,7 @@ static void pl011_dma_tx_callback(void *data)
dmacr = uap->dmacr;
uap->dmacr = dmacr & ~UART011_TXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
/*
* If TX DMA was disabled, it means that we've stopped the DMA for
@@ -552,7 +645,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
dma_dev->device_issue_pending(chan);
uap->dmacr |= UART011_TXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
uap->dmatx.queued = true;
/*
@@ -588,9 +681,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
*/
if (uap->dmatx.queued) {
uap->dmacr |= UART011_TXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
uap->im &= ~UART011_TXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
return true;
}
@@ -600,7 +693,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
*/
if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
return true;
}
return false;
@@ -614,7 +707,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
{
if (uap->dmatx.queued) {
uap->dmacr &= ~UART011_TXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
}
}
@@ -640,14 +733,12 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
if (!uap->dmatx.queued) {
if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM;
- writew(uap->im, uap->port.membase +
- UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
} else
ret = false;
} else if (!(uap->dmacr & UART011_TXDMAE)) {
uap->dmacr |= UART011_TXDMAE;
- writew(uap->dmacr,
- uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
}
return ret;
}
@@ -658,9 +749,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
*/
dmacr = uap->dmacr;
uap->dmacr &= ~UART011_TXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
- if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) {
+ if (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) {
/*
* No space in the FIFO, so enable the transmit interrupt
* so we know when there is space. Note that once we've
@@ -669,13 +760,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
return false;
}
- writew(uap->port.x_char, uap->port.membase + UART01x_DR);
+ pl011_write(uap->port.x_char, uap, REG_DR);
uap->port.icount.tx++;
uap->port.x_char = 0;
/* Success - restore the DMA state */
uap->dmacr = dmacr;
- writew(dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(dmacr, uap, REG_DMACR);
return true;
}
@@ -703,7 +794,7 @@ __acquires(&uap->port.lock)
DMA_TO_DEVICE);
uap->dmatx.queued = false;
uap->dmacr &= ~UART011_TXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
}
}
@@ -743,11 +834,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
dma_async_issue_pending(rxchan);
uap->dmacr |= UART011_RXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
uap->dmarx.running = true;
uap->im &= ~UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
return 0;
}
@@ -805,8 +896,8 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
*/
if (dma_count == pending && readfifo) {
/* Clear any error flags */
- writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
- uap->port.membase + UART011_ICR);
+ pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
+ UART011_FEIS, uap, REG_ICR);
/*
* If we read all the DMA'd characters, and we had an
@@ -854,7 +945,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
/* Disable RX DMA - incoming data will wait in the FIFO */
uap->dmacr &= ~UART011_RXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
uap->dmarx.running = false;
pending = sgbuf->sg.length - state.residue;
@@ -874,7 +965,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
"fall back to interrupt mode\n");
uap->im |= UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
}
}
@@ -922,7 +1013,7 @@ static void pl011_dma_rx_callback(void *data)
dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
"fall back to interrupt mode\n");
uap->im |= UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
}
}
@@ -935,7 +1026,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
{
/* FIXME. Just disable the DMA enable */
uap->dmacr &= ~UART011_RXDMAE;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
}
/*
@@ -979,7 +1070,7 @@ static void pl011_dma_rx_poll(unsigned long args)
spin_lock_irqsave(&uap->port.lock, flags);
pl011_dma_rx_stop(uap);
uap->im |= UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
spin_unlock_irqrestore(&uap->port.lock, flags);
uap->dmarx.running = false;
@@ -1041,7 +1132,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
skip_rx:
/* Turn on DMA error (RX/TX will be enabled on demand) */
uap->dmacr |= UART011_DMAONERR;
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
/*
* ST Micro variants has some specific dma burst threshold
@@ -1049,8 +1140,8 @@ skip_rx:
* be issued above/below 16 bytes.
*/
if (uap->vendor->dma_threshold)
- writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
- uap->port.membase + ST_UART011_DMAWM);
+ pl011_write(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
+ uap, REG_ST_DMAWM);
if (uap->using_rx_dma) {
if (pl011_dma_rx_trigger_dma(uap))
@@ -1075,12 +1166,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
- while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
+ while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
barrier();
spin_lock_irq(&uap->port.lock);
uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
- writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ pl011_write(uap->dmacr, uap, REG_DMACR);
spin_unlock_irq(&uap->port.lock);
if (uap->using_tx_dma) {
@@ -1181,7 +1272,7 @@ static void pl011_stop_tx(struct uart_port *port)
container_of(port, struct uart_amba_port, port);
uap->im &= ~UART011_TXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
pl011_dma_tx_stop(uap);
}
@@ -1191,7 +1282,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
static void pl011_start_tx_pio(struct uart_amba_port *uap)
{
uap->im |= UART011_TXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
pl011_tx_chars(uap, false);
}
@@ -1211,7 +1302,7 @@ static void pl011_stop_rx(struct uart_port *port)
uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
UART011_PEIM|UART011_BEIM|UART011_OEIM);
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
pl011_dma_rx_stop(uap);
}
@@ -1222,7 +1313,7 @@ static void pl011_enable_ms(struct uart_port *port)
container_of(port, struct uart_amba_port, port);
uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
}
static void pl011_rx_chars(struct uart_amba_port *uap)
@@ -1242,7 +1333,7 @@ __acquires(&uap->port.lock)
dev_dbg(uap->port.dev, "could not trigger RX DMA job "
"fall back to interrupt mode again\n");
uap->im |= UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
} else {
#ifdef CONFIG_DMA_ENGINE
/* Start Rx DMA poll */
@@ -1263,10 +1354,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
bool from_irq)
{
if (unlikely(!from_irq) &&
- readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
return false; /* unable to transmit character */
- writew(c, uap->port.membase + UART01x_DR);
+ pl011_write(c, uap, REG_DR);
uap->port.icount.tx++;
return true;
@@ -1313,7 +1404,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
{
unsigned int status, delta;
- status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status;
uap->old_status = status;
@@ -1341,15 +1432,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
return;
/* workaround to make sure that all bits are unlocked.. */
- writew(0x00, uap->port.membase + UART011_ICR);
+ pl011_write(0x00, uap, REG_ICR);
/*
* WA: introduce 26ns(1 uart clk) delay before W1C;
* single apb access will incur 2 pclk(133.12Mhz) delay,
* so add 2 dummy reads
*/
- dummy_read = readw(uap->port.membase + UART011_ICR);
- dummy_read = readw(uap->port.membase + UART011_ICR);
+ dummy_read = pl011_read(uap, REG_ICR);
+ dummy_read = pl011_read(uap, REG_ICR);
}
static irqreturn_t pl011_int(int irq, void *dev_id)
@@ -1361,15 +1452,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
int handled = 0;
spin_lock_irqsave(&uap->port.lock, flags);
- imsc = readw(uap->port.membase + UART011_IMSC);
- status = readw(uap->port.membase + UART011_RIS) & imsc;
+ imsc = pl011_read(uap, REG_IMSC);
+ status = pl011_read(uap, REG_RIS) & imsc;
if (status) {
do {
check_apply_cts_event_workaround(uap);
- writew(status & ~(UART011_TXIS|UART011_RTIS|
- UART011_RXIS),
- uap->port.membase + UART011_ICR);
+ pl011_write(status & ~(UART011_TXIS|UART011_RTIS|
+ UART011_RXIS),
+ uap, REG_ICR);
if (status & (UART011_RTIS|UART011_RXIS)) {
if (pl011_dma_rx_running(uap))
@@ -1386,7 +1477,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (pass_counter-- == 0)
break;
- status = readw(uap->port.membase + UART011_RIS) & imsc;
+ status = pl011_read(uap, REG_RIS) & imsc;
} while (status != 0);
handled = 1;
}
@@ -1400,7 +1491,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- unsigned int status = readw(uap->port.membase + UART01x_FR);
+ unsigned int status = pl011_read(uap, REG_FR);
return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
@@ -1409,7 +1500,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int result = 0;
- unsigned int status = readw(uap->port.membase + UART01x_FR);
+ unsigned int status = pl011_read(uap, REG_FR);
#define TIOCMBIT(uartbit, tiocmbit) \
if (status & uartbit) \
@@ -1429,7 +1520,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
container_of(port, struct uart_amba_port, port);
unsigned int cr;
- cr = readw(uap->port.membase + UART011_CR);
+ cr = pl011_read(uap, REG_CR);
#define TIOCMBIT(tiocmbit, uartbit) \
if (mctrl & tiocmbit) \
@@ -1449,7 +1540,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
}
#undef TIOCMBIT
- writew(cr, uap->port.membase + UART011_CR);
+ pl011_write(cr, uap, REG_CR);
}
static void pl011_break_ctl(struct uart_port *port, int break_state)
@@ -1460,12 +1551,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readw(uap->port.membase + uap->lcrh_tx);
+ lcr_h = pl011_read(uap, REG_LCRH_TX);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- writew(lcr_h, uap->port.membase + uap->lcrh_tx);
+ pl011_write(lcr_h, uap, REG_LCRH_TX);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -1475,9 +1566,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- unsigned char __iomem *regs = uap->port.membase;
- writew(readw(regs + UART011_MIS), regs + UART011_ICR);
+ pl011_write(pl011_read(uap, REG_MIS), uap, REG_ICR);
/*
* There is no way to clear TXIM as this is "ready to transmit IRQ", so
* we simply mask it. start_tx() will unmask it.
@@ -1491,7 +1581,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
* (including tx queue), so we're also fine with start_tx()'s caller
* side.
*/
- writew(readw(regs + UART011_IMSC) & ~UART011_TXIM, regs + UART011_IMSC);
+ pl011_write(pl011_read(uap, REG_IMSC) & ~UART011_TXIM, uap,
+ REG_IMSC);
}
static int pl011_get_poll_char(struct uart_port *port)
@@ -1506,11 +1597,11 @@ static int pl011_get_poll_char(struct uart_port *port)
*/
pl011_quiesce_irqs(port);
- status = readw(uap->port.membase + UART01x_FR);
+ status = pl011_read(uap, REG_FR);
if (status & UART01x_FR_RXFE)
return NO_POLL_CHAR;
- return readw(uap->port.membase + UART01x_DR);
+ return pl011_read(uap, REG_DR);
}
static void pl011_put_poll_char(struct uart_port *port,
@@ -1519,10 +1610,10 @@ static void pl011_put_poll_char(struct uart_port *port,
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
barrier();
- writew(ch, uap->port.membase + UART01x_DR);
+ pl011_write(ch, uap, REG_DR);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -1546,15 +1637,16 @@ static int pl011_hwinit(struct uart_port *port)
uap->port.uartclk = clk_get_rate(uap->clk);
/* Clear pending error and receive interrupts */
- writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
- UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
+ pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
+ UART011_FEIS | UART011_RTIS | UART011_RXIS,
+ uap, REG_ICR);
/*
* Save interrupts enable mask, and enable RX interrupts in case if
* the interrupt is used for NMI entry.
*/
- uap->im = readw(uap->port.membase + UART011_IMSC);
- writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC);
+ uap->im = pl011_read(uap, REG_IMSC);
+ pl011_write(UART011_RTIM | UART011_RXIM, uap, REG_IMSC);
if (dev_get_platdata(uap->port.dev)) {
struct amba_pl011_data *plat;
@@ -1566,24 +1658,30 @@ static int pl011_hwinit(struct uart_port *port)
return 0;
}
+static bool pl011_split_lcrh(const struct uart_amba_port *uap)
+{
+ return pl011_reg_to_offset(uap, REG_LCRH_RX) !=
+ pl011_reg_to_offset(uap, REG_LCRH_TX);
+}
+
static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
{
- writew(lcr_h, uap->port.membase + uap->lcrh_rx);
- if (uap->lcrh_rx != uap->lcrh_tx) {
+ pl011_write(lcr_h, uap, REG_LCRH_RX);
+ if (pl011_split_lcrh(uap)) {
int i;
/*
* Wait 10 PCLKs before writing LCRH_TX register,
* to get this delay write read only register 10 times
*/
for (i = 0; i < 10; ++i)
- writew(0xff, uap->port.membase + UART011_MIS);
- writew(lcr_h, uap->port.membase + uap->lcrh_tx);
+ pl011_write(0xff, uap, REG_MIS);
+ pl011_write(lcr_h, uap, REG_LCRH_TX);
}
}
static int pl011_allocate_irq(struct uart_amba_port *uap)
{
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
}
@@ -1598,12 +1696,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
spin_lock_irq(&uap->port.lock);
/* Clear out any spuriously appearing RX interrupts */
- writew(UART011_RTIS | UART011_RXIS,
- uap->port.membase + UART011_ICR);
+ pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
uap->im = UART011_RTIM;
if (!pl011_dma_rx_running(uap))
uap->im |= UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
+ pl011_write(uap->im, uap, REG_IMSC);
spin_unlock_irq(&uap->port.lock);
}
@@ -1622,21 +1719,21 @@ static int pl011_startup(struct uart_port *port)
if (retval)
goto clk_dis;
- writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
+ pl011_write(uap->vendor->ifls, uap, REG_IFLS);
spin_lock_irq(&uap->port.lock);
/* restore RTS and DTR */
cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
- writew(cr, uap->port.membase + UART011_CR);
+ pl011_write(cr, uap, REG_CR);
spin_unlock_irq(&uap->port.lock);
/*
* initialise the old status of the modem signals
*/
- uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ uap->old_status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY;
/* Startup DMA */
pl011_dma_startup(uap);
@@ -1677,9 +1774,9 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
{
unsigned long val;
- val = readw(uap->port.membase + lcrh);
+ val = pl011_read(uap, lcrh);
val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
- writew(val, uap->port.membase + lcrh);
+ pl011_write(val, uap, lcrh);
}
/*
@@ -1693,19 +1790,19 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
uap->autorts = false;
spin_lock_irq(&uap->port.lock);
- cr = readw(uap->port.membase + UART011_CR);
+ cr = pl011_read(uap, REG_CR);
uap->old_cr = cr;
cr &= UART011_CR_RTS | UART011_CR_DTR;
cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
- writew(cr, uap->port.membase + UART011_CR);
+ pl011_write(cr, uap, REG_CR);
spin_unlock_irq(&uap->port.lock);
/*
* disable break condition and fifos
*/
- pl011_shutdown_channel(uap, uap->lcrh_rx);
- if (uap->lcrh_rx != uap->lcrh_tx)
- pl011_shutdown_channel(uap, uap->lcrh_tx);
+ pl011_shutdown_channel(uap, REG_LCRH_RX);
+ if (pl011_split_lcrh(uap))
+ pl011_shutdown_channel(uap, REG_LCRH_TX);
}
static void pl011_disable_interrupts(struct uart_amba_port *uap)
@@ -1714,8 +1811,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
/* mask all interrupts and clear all pending ones */
uap->im = 0;
- writew(uap->im, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
+ pl011_write(uap->im, uap, REG_IMSC);
+ pl011_write(0xffff, uap, REG_ICR);
spin_unlock_irq(&uap->port.lock);
}
@@ -1867,8 +1964,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
pl011_enable_ms(port);
/* first, disable everything */
- old_cr = readw(port->membase + UART011_CR);
- writew(0, port->membase + UART011_CR);
+ old_cr = pl011_read(uap, REG_CR);
+ pl011_write(0, uap, REG_CR);
if (termios->c_cflag & CRTSCTS) {
if (old_cr & UART011_CR_RTS)
@@ -1901,17 +1998,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
quot -= 2;
}
/* Set baud rate */
- writew(quot & 0x3f, port->membase + UART011_FBRD);
- writew(quot >> 6, port->membase + UART011_IBRD);
+ pl011_write(quot & 0x3f, uap, REG_FBRD);
+ pl011_write(quot >> 6, uap, REG_IBRD);
/*
* ----------v----------v----------v----------v-----
- * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER
- * UART011_FBRD & UART011_IBRD.
+ * NOTE: REG_LCRH_TX and REG_LCRH_RX MUST BE WRITTEN AFTER
+ * REG_FBRD & REG_IBRD.
* ----------^----------^----------^----------^-----
*/
pl011_write_lcr_h(uap, lcr_h);
- writew(old_cr, port->membase + UART011_CR);
+ pl011_write(old_cr, uap, REG_CR);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -2052,9 +2149,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
barrier();
- writew(ch, uap->port.membase + UART01x_DR);
+ pl011_write(ch, uap, REG_DR);
}
static void
@@ -2079,10 +2176,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* First save the CR then disable the interrupts
*/
if (!uap->vendor->always_enabled) {
- old_cr = readw(uap->port.membase + UART011_CR);
+ old_cr = pl011_read(uap, REG_CR);
new_cr = old_cr & ~UART011_CR_CTSEN;
new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
- writew(new_cr, uap->port.membase + UART011_CR);
+ pl011_write(new_cr, uap, REG_CR);
}
uart_console_write(&uap->port, s, count, pl011_console_putchar);
@@ -2092,10 +2189,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* and restore the TCR
*/
do {
- status = readw(uap->port.membase + UART01x_FR);
+ status = pl011_read(uap, REG_FR);
} while (status & UART01x_FR_BUSY);
if (!uap->vendor->always_enabled)
- writew(old_cr, uap->port.membase + UART011_CR);
+ pl011_write(old_cr, uap, REG_CR);
if (locked)
spin_unlock(&uap->port.lock);
@@ -2108,10 +2205,10 @@ static void __init
pl011_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
- if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
+ if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
- lcr_h = readw(uap->port.membase + uap->lcrh_tx);
+ lcr_h = pl011_read(uap, REG_LCRH_TX);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -2126,13 +2223,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
else
*bits = 8;
- ibrd = readw(uap->port.membase + UART011_IBRD);
- fbrd = readw(uap->port.membase + UART011_FBRD);
+ ibrd = pl011_read(uap, REG_IBRD);
+ fbrd = pl011_read(uap, REG_FBRD);
*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
if (uap->vendor->oversampling) {
- if (readw(uap->port.membase + UART011_CR)
+ if (pl011_read(uap, REG_CR)
& ST_UART011_CR_OVSFACT)
*baud *= 2;
}
@@ -2206,7 +2303,10 @@ static void pl011_putc(struct uart_port *port, int c)
{
while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
;
- writeb(c, port->membase + UART01x_DR);
+ if (port->iotype == UPIO_MEM32)
+ writel(c, port->membase + UART01x_DR);
+ else
+ writeb(c, port->membase + UART01x_DR);
while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY)
;
}
@@ -2319,7 +2419,6 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
uap->port.dev = dev;
uap->port.mapbase = mmiobase->start;
uap->port.membase = base;
- uap->port.iotype = UPIO_MEM;
uap->port.fifosize = uap->fifosize;
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = index;
@@ -2334,8 +2433,8 @@ static int pl011_register_port(struct uart_amba_port *uap)
int ret;
/* Ensure interrupts from this UART are masked and cleared */
- writew(0, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
+ pl011_write(0, uap, REG_IMSC);
+ pl011_write(0xffff, uap, REG_ICR);
if (!amba_reg.state) {
ret = uart_register_driver(&amba_reg);
@@ -2372,10 +2471,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
if (IS_ERR(uap->clk))
return PTR_ERR(uap->clk);
+ uap->reg_offset = vendor->reg_offset;
uap->vendor = vendor;
- uap->lcrh_rx = vendor->lcrh_rx;
- uap->lcrh_tx = vendor->lcrh_tx;
uap->fifosize = vendor->get_fifosize(dev);
+ uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.irq = dev->irq[0];
uap->port.ops = &amba_pl011_pops;
@@ -2453,8 +2552,10 @@ static int sbsa_uart_probe(struct platform_device *pdev)
if (!uap)
return -ENOMEM;
+ uap->reg_offset = vendor_sbsa.reg_offset;
uap->vendor = &vendor_sbsa;
uap->fifosize = 32;
+ uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.irq = platform_get_irq(pdev, 0);
uap->port.ops = &sbsa_uart_pops;
uap->fixed_baud = baudrate;