diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index fbe919410e0f..c03199e122ed 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -27,6 +27,7 @@ #include <linux/dmaengine.h> #include <linux/platform_data/dma-dw.h> +#include <linux/platform_data/dma-hsu.h> #include "8250.h" @@ -1525,6 +1526,148 @@ byt_serial_setup(struct serial_private *priv, return ret; } +#define INTEL_MID_UART_PS 0x30 +#define INTEL_MID_UART_MUL 0x34 + +static void intel_mid_set_termios_50M(struct uart_port *p, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = tty_termios_baud_rate(termios); + u32 ps, mul; + + /* + * The uart clk is 50Mhz, and the baud rate come from: + * baud = 50M * MUL / (DIV * PS * DLAB) + * + * For those basic low baud rate we can get the direct + * scalar from 2746800, like 115200 = 2746800/24. For those + * higher baud rate, we handle them case by case, mainly by + * adjusting the MUL/PS registers, and DIV register is kept + * as default value 0x3d09 to make things simple. + */ + + ps = 0x10; + + switch (baud) { + case 500000: + case 1000000: + case 1500000: + case 3000000: + mul = 0x3a98; + p->uartclk = 48000000; + break; + case 2000000: + case 4000000: + mul = 0x2710; + ps = 0x08; + p->uartclk = 64000000; + break; + case 2500000: + mul = 0x30d4; + p->uartclk = 40000000; + break; + case 3500000: + mul = 0x3345; + ps = 0x0c; + p->uartclk = 56000000; + break; + default: + mul = 0x2400; + p->uartclk = 29491200; + } + + writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */ + writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */ + + serial8250_do_set_termios(p, termios, old); +} + +static bool intel_mid_dma_filter(struct dma_chan *chan, void *param) +{ + struct hsu_dma_slave *s = param; + + if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id) + return false; + + chan->private = s; + return true; +} + +static int intel_mid_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx, + int index, struct pci_dev *dma_dev) +{ + struct device *dev = port->port.dev; + struct uart_8250_dma *dma; + struct hsu_dma_slave *tx_param, *rx_param; + + dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); + if (!dma) + return -ENOMEM; + + tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); + if (!tx_param) + return -ENOMEM; + + rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); + if (!rx_param) + return -ENOMEM; + + rx_param->chan_id = index * 2 + 1; + tx_param->chan_id = index * 2; + + dma->rxconf.src_maxburst = 64; + dma->txconf.dst_maxburst = 64; + + rx_param->dma_dev = &dma_dev->dev; + tx_param->dma_dev = &dma_dev->dev; + + dma->fn = intel_mid_dma_filter; + dma->rx_param = rx_param; + dma->tx_param = tx_param; + + port->port.type = PORT_16750; + port->port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; + port->dma = dma; + + return pci_default_setup(priv, board, port, idx); +} + +#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b +#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c +#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d + +static int pnw_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *pdev = priv->dev; + struct pci_dev *dma_dev; + int index; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_PNW_UART1: + index = 0; + break; + case PCI_DEVICE_ID_INTEL_PNW_UART2: + index = 1; + break; + case PCI_DEVICE_ID_INTEL_PNW_UART3: + index = 2; + break; + default: + return -EINVAL; + } + + dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 3)); + + port->port.set_termios = intel_mid_set_termios_50M; + + return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev); +} + static int pci_omegapci_setup(struct serial_private *priv, const struct pciserial_board *board, @@ -1989,6 +2132,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { }, { .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PNW_UART1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pnw_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PNW_UART2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pnw_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PNW_UART3, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pnw_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_QRK_UART, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, @@ -2878,6 +3042,7 @@ enum pci_board_num_t { pbn_ADDIDATA_PCIe_8_3906250, pbn_ce4100_1_115200, pbn_byt, + pbn_pnw, pbn_qrk, pbn_omegapci, pbn_NETMOS9900_2s_115200, @@ -3644,6 +3809,11 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 0x80, .reg_shift = 2, }, + [pbn_pnw] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + }, [pbn_qrk] = { .flags = FL_BASE0, .num_ports = 1, @@ -5377,6 +5547,19 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_byt }, /* + * Intel Penwell + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pnw}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pnw}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pnw}, + + /* * Intel Quark x1000 */ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART, |