diff options
Diffstat (limited to 'drivers/thunderbolt')
| -rw-r--r-- | drivers/thunderbolt/Makefile | 2 | ||||
| -rw-r--r-- | drivers/thunderbolt/dma_port.c | 524 | ||||
| -rw-r--r-- | drivers/thunderbolt/dma_port.h | 34 | ||||
| -rw-r--r-- | drivers/thunderbolt/eeprom.c | 51 | ||||
| -rw-r--r-- | drivers/thunderbolt/switch.c | 30 | ||||
| -rw-r--r-- | drivers/thunderbolt/tb.h | 5 |
6 files changed, 644 insertions, 2 deletions
diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile index e276a9a62261..9828e862dd35 100644 --- a/drivers/thunderbolt/Makefile +++ b/drivers/thunderbolt/Makefile @@ -1,3 +1,3 @@ obj-${CONFIG_THUNDERBOLT} := thunderbolt.o thunderbolt-objs := nhi.o ctl.o tb.o switch.o cap.o path.o tunnel_pci.o eeprom.o -thunderbolt-objs += domain.o +thunderbolt-objs += domain.o dma_port.o diff --git a/drivers/thunderbolt/dma_port.c b/drivers/thunderbolt/dma_port.c new file mode 100644 index 000000000000..af6dde347bee --- /dev/null +++ b/drivers/thunderbolt/dma_port.c @@ -0,0 +1,524 @@ +/* + * Thunderbolt DMA configuration based mailbox support + * + * Copyright (C) 2017, Intel Corporation + * Authors: Michael Jamet <michael.jamet@intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/slab.h> + +#include "dma_port.h" +#include "tb_regs.h" + +#define DMA_PORT_CAP 0x3e + +#define MAIL_DATA 1 +#define MAIL_DATA_DWORDS 16 + +#define MAIL_IN 17 +#define MAIL_IN_CMD_SHIFT 28 +#define MAIL_IN_CMD_MASK GENMASK(31, 28) +#define MAIL_IN_CMD_FLASH_WRITE 0x0 +#define MAIL_IN_CMD_FLASH_UPDATE_AUTH 0x1 +#define MAIL_IN_CMD_FLASH_READ 0x2 +#define MAIL_IN_CMD_POWER_CYCLE 0x4 +#define MAIL_IN_DWORDS_SHIFT 24 +#define MAIL_IN_DWORDS_MASK GENMASK(27, 24) +#define MAIL_IN_ADDRESS_SHIFT 2 +#define MAIL_IN_ADDRESS_MASK GENMASK(23, 2) +#define MAIL_IN_CSS BIT(1) +#define MAIL_IN_OP_REQUEST BIT(0) + +#define MAIL_OUT 18 +#define MAIL_OUT_STATUS_RESPONSE BIT(29) +#define MAIL_OUT_STATUS_CMD_SHIFT 4 +#define MAIL_OUT_STATUS_CMD_MASK GENMASK(7, 4) +#define MAIL_OUT_STATUS_MASK GENMASK(3, 0) +#define MAIL_OUT_STATUS_COMPLETED 0 +#define MAIL_OUT_STATUS_ERR_AUTH 1 +#define MAIL_OUT_STATUS_ERR_ACCESS 2 + +#define DMA_PORT_TIMEOUT 5000 /* ms */ +#define DMA_PORT_RETRIES 3 + +/** + * struct tb_dma_port - DMA control port + * @sw: Switch the DMA port belongs to + * @port: Switch port number where DMA capability is found + * @base: Start offset of the mailbox registers + * @buf: Temporary buffer to store a single block + */ +struct tb_dma_port { + struct tb_switch *sw; + u8 port; + u32 base; + u8 *buf; +}; + +/* + * When the switch is in safe mode it supports very little functionality + * so we don't validate that much here. + */ +static bool dma_port_match(const struct tb_cfg_request *req, + const struct ctl_pkg *pkg) +{ + u64 route = tb_cfg_get_route(pkg->buffer) & ~BIT_ULL(63); + + if (pkg->frame.eof == TB_CFG_PKG_ERROR) + return true; + if (pkg->frame.eof != req->response_type) + return false; + if (route != tb_cfg_get_route(req->request)) + return false; + if (pkg->frame.size != req->response_size) + return false; + + return true; +} + +static bool dma_port_copy(struct tb_cfg_request *req, const struct ctl_pkg *pkg) +{ + memcpy(req->response, pkg->buffer, req->response_size); + return true; +} + +static int dma_port_read(struct tb_ctl *ctl, void *buffer, u64 route, + u32 port, u32 offset, u32 length, int timeout_msec) +{ + struct cfg_read_pkg request = { + .header = tb_cfg_make_header(route), + .addr = { + .seq = 1, + .port = port, + .space = TB_CFG_PORT, + .offset = offset, + .length = length, + }, + }; + struct tb_cfg_request *req; + struct cfg_write_pkg reply; + struct tb_cfg_result res; + + req = tb_cfg_request_alloc(); + if (!req) + return -ENOMEM; + + req->match = dma_port_match; + req->copy = dma_port_copy; + req->request = &request; + req->request_size = sizeof(request); + req->request_type = TB_CFG_PKG_READ; + req->response = &reply; + req->response_size = 12 + 4 * length; + req->response_type = TB_CFG_PKG_READ; + + res = tb_cfg_request_sync(ctl, req, timeout_msec); + + tb_cfg_request_put(req); + + if (res.err) + return res.err; + + memcpy(buffer, &reply.data, 4 * length); + return 0; +} + +static int dma_port_write(struct tb_ctl *ctl, const void *buffer, u64 route, + u32 port, u32 offset, u32 length, int timeout_msec) +{ + struct cfg_write_pkg request = { + .header = tb_cfg_make_header(route), + .addr = { + .seq = 1, + .port = port, + .space = TB_CFG_PORT, + .offset = offset, + .length = length, + }, + }; + struct tb_cfg_request *req; + struct cfg_read_pkg reply; + struct tb_cfg_result res; + + memcpy(&request.data, buffer, length * 4); + + req = tb_cfg_request_alloc(); + if (!req) + return -ENOMEM; + + req->match = dma_port_match; + req->copy = dma_port_copy; + req->request = &request; + req->request_size = 12 + 4 * length; + req->request_type = TB_CFG_PKG_WRITE; + req->response = &reply; + req->response_size = sizeof(reply); + req->response_type = TB_CFG_PKG_WRITE; + + res = tb_cfg_request_sync(ctl, req, timeout_msec); + + tb_cfg_request_put(req); + + return res.err; +} + +static int dma_find_port(struct tb_switch *sw) +{ + int port, ret; + u32 type; + + /* + * The DMA (NHI) port is either 3 or 5 depending on the + * controller. Try both starting from 5 which is more common. + */ + port = 5; + ret = dma_port_read(sw->tb->ctl, &type, tb_route(sw), port, 2, 1, + DMA_PORT_TIMEOUT); + if (!ret && (type & 0xffffff) == TB_TYPE_NHI) + return port; + + port = 3; + ret = dma_port_read(sw->tb->ctl, &type, tb_route(sw), port, 2, 1, + DMA_PORT_TIMEOUT); + if (!ret && (type & 0xffffff) == TB_TYPE_NHI) + return port; + + return -ENODEV; +} + +/** + * dma_port_alloc() - Finds DMA control port from a switch pointed by route + * @sw: Switch from where find the DMA port + * + * Function checks if the switch NHI port supports DMA configuration + * based mailbox capability and if it does, allocates and initializes + * DMA port structure. Returns %NULL if the capabity was not found. + * + * The DMA control port is functional also when the switch is in safe + * mode. + */ +struct tb_dma_port *dma_port_alloc(struct tb_switch *sw) +{ + struct tb_dma_port *dma; + int port; + + port = dma_find_port(sw); + if (port < 0) + return NULL; + + dma = kzalloc(sizeof(*dma), GFP_KERNEL); + if (!dma) + return NULL; + + dma->buf = kmalloc_array(MAIL_DATA_DWORDS, sizeof(u32), GFP_KERNEL); + if (!dma->buf) { + kfree(dma); + return NULL; + } + + dma->sw = sw; + dma->port = port; + dma->base = DMA_PORT_CAP; + + return dma; +} + +/** + * dma_port_free() - Release DMA control port structure + * @dma: DMA control port + */ +void dma_port_free(struct tb_dma_port *dma) +{ + if (dma) { + kfree(dma->buf); + kfree(dma); + } +} + +static int dma_port_wait_for_completion(struct tb_dma_port *dma, + unsigned int timeout) +{ + unsigned long end = jiffies + msecs_to_jiffies(timeout); + struct tb_switch *sw = dma->sw; + + do { + int ret; + u32 in; + + ret = dma_port_read(sw->tb->ctl, &in, tb_route(sw), dma->port, + dma->base + MAIL_IN, 1, 50); + if (ret) { + if (ret != -ETIMEDOUT) + return ret; + } else if (!(in & MAIL_IN_OP_REQUEST)) { + return 0; + } + + usleep_range(50, 100); + } while (time_before(jiffies, end)); + + return -ETIMEDOUT; +} + +static int status_to_errno(u32 status) +{ + switch (status & MAIL_OUT_STATUS_MASK) { + case MAIL_OUT_STATUS_COMPLETED: + return 0; + case MAIL_OUT_STATUS_ERR_AUTH: + return -EINVAL; + case MAIL_OUT_STATUS_ERR_ACCESS: + return -EACCES; + } + + return -EIO; +} + +static int dma_port_request(struct tb_dma_port *dma, u32 in, + unsigned int timeout) +{ + struct tb_switch *sw = dma->sw; + u32 out; + int ret; + + ret = dma_port_write(sw->tb->ctl, &in, tb_route(sw), dma->port, + dma->base + MAIL_IN, 1, DMA_PORT_TIMEOUT); + if (ret) + return ret; + + ret = dma_port_wait_for_completion(dma, timeout); + if (ret) + return ret; + + ret = dma_port_read(sw->tb->ctl, &out, tb_route(sw), dma->port, + dma->base + MAIL_OUT, 1, DMA_PORT_TIMEOUT); + if (ret) + return ret; + + return status_to_errno(out); +} + +static int dma_port_flash_read_block(struct tb_dma_port *dma, u32 address, + void *buf, u32 size) +{ + struct tb_switch *sw = dma->sw; + u32 in, dwaddress, dwords; + int ret; + + dwaddress = address / 4; + dwords = size / 4; + + in = MAIL_IN_CMD_FLASH_READ << MAIL_IN_CMD_SHIFT; + if (dwords < MAIL_DATA_DWORDS) + in |= (dwords << MAIL_IN_DWORDS_SHIFT) & MAIL_IN_DWORDS_MASK; + in |= (dwaddress << MAIL_IN_ADDRESS_SHIFT) & MAIL_IN_ADDRESS_MASK; + in |= MAIL_IN_OP_REQUEST; + + ret = dma_port_request(dma, in, DMA_PORT_TIMEOUT); + if (ret) + return ret; + + return dma_port_read(sw->tb->ctl, buf, tb_route(sw), dma->port, + dma->base + MAIL_DATA, dwords, DMA_PORT_TIMEOUT); +} + +static int dma_port_flash_write_block(struct tb_dma_port *dma, u32 address, + const void *buf, u32 size) +{ + struct tb_switch *sw = dma->sw; + u32 in, dwaddress, dwords; + int ret; + + dwords = size / 4; + + /* Write the block to MAIL_DATA registers */ + ret = dma_port_write(sw->tb->ctl, buf, tb_route(sw), dma->port, + dma->base + MAIL_DATA, dwords, DMA_PORT_TIMEOUT); + + in = MAIL_IN_CMD_FLASH_WRITE << MAIL_IN_CMD_SHIFT; + + /* CSS header write is always done to the same magic address */ + if (address >= DMA_PORT_CSS_ADDRESS) { + dwaddress = DMA_PORT_CSS_ADDRESS; + in |= MAIL_IN_CSS; + } else { + dwaddress = address / 4; + } + + in |= ((dwords - 1) << MAIL_IN_DWORDS_SHIFT) & MAIL_IN_DWORDS_MASK; + in |= (dwaddress << MAIL_IN_ADDRESS_SHIFT) & MAIL_IN_ADDRESS_MASK; + in |= MAIL_IN_OP_REQUEST; + + return dma_port_request(dma, in, DMA_PORT_TIMEOUT); +} + +/** + * dma_port_flash_read() - Read from active flash region + * @dma: DMA control port + * @address: Address relative to the start of active region + * @buf: Buffer where the data is read + * @size: Size of the buffer + */ +int dma_port_flash_read(struct tb_dma_port *dma, unsigned int address, + void *buf, size_t size) +{ + unsigned int retries = DMA_PORT_RETRIES; + unsigned int offset; + + offset = address & 3; + address = address & ~3; + + do { + u32 nbytes = min_t(u32, size, MAIL_DATA_DWORDS * 4); + int ret; + + ret = dma_port_flash_read_block(dma, address, dma->buf, + ALIGN(nbytes, 4)); + if (ret) { + if (ret == -ETIMEDOUT) { + if (retries--) + continue; + ret = -EIO; + } + return ret; + } + + memcpy(buf, dma->buf + offset, nbytes); + + size -= nbytes; + address += nbytes; + buf += nbytes; + } while (size > 0); + + return 0; +} + +/** + * dma_port_flash_write() - Write to non-active flash region + * @dma: DMA control port + * @address: Address relative to the start of non-active region + * @buf: Data to write + * @size: Size of the buffer + * + * Writes block of data to the non-active flash region of the switch. If + * the address is given as %DMA_PORT_CSS_ADDRESS the block is written + * using CSS command. + */ +int dma_port_flash_write(struct tb_dma_port *dma, unsigned int address, + const void *buf, size_t size) +{ + unsigned int retries = DMA_PORT_RETRIES; + unsigned int offset; + + if (address >= DMA_PORT_CSS_ADDRESS) { + offset = 0; + if (size > DMA_PORT_CSS_MAX_SIZE) + return -E2BIG; + } else { + offset = address & 3; + address = address & ~3; + } + + do { + u32 nbytes = min_t(u32, size, MAIL_DATA_DWORDS * 4); + int ret; + + memcpy(dma->buf + offset, buf, nbytes); + + ret = dma_port_flash_write_block(dma, address, buf, nbytes); + if (ret) { + if (ret == -ETIMEDOUT) { + if (retries--) + continue; + ret = -EIO; + } + return ret; + } + + size -= nbytes; + address += nbytes; + buf += nbytes; + } while (size > 0); + + return 0; +} + +/** + * dma_port_flash_update_auth() - Starts flash authenticate cycle + * @dma: DMA control port + * + * Starts the flash update authentication cycle. If the image in the + * non-active area was valid, the switch starts upgrade process where + * active and non-active area get swapped in the end. Caller should call + * dma_port_flash_update_auth_status() to get status of this command. + * This is because if the switch in question is root switch the + * thunderbolt host controller gets reset as well. + */ +int dma_port_flash_update_auth(struct tb_dma_port *dma) +{ + u32 in; + + in = MAIL_IN_CMD_FLASH_UPDATE_AUTH << MAIL_IN_CMD_SHIFT; + in |= MAIL_IN_OP_REQUEST; + + return dma_port_request(dma, in, 150); +} + +/** + * dma_port_flash_update_auth_status() - Reads status of update auth command + * @dma: DMA control port + * @status: Status code of the operation + * + * The function checks if there is status available from the last update + * auth command. Returns %0 if there is no status and no further + * action is required. If there is status, %1 is returned instead and + * @status holds the failure code. + * + * Negative return means there was an error reading status from the + * switch. + */ +int dma_port_flash_update_auth_status(struct tb_dma_port *dma, u32 *status) +{ + struct tb_switch *sw = dma->sw; + u32 out, cmd; + int ret; + + ret = dma_port_read(sw->tb->ctl, &out, tb_route(sw), dma->port, + dma->base + MAIL_OUT, 1, DMA_PORT_TIMEOUT); + if (ret) + return ret; + + /* Check if the status relates to flash update auth */ + cmd = (out & MAIL_OUT_STATUS_CMD_MASK) >> MAIL_OUT_STATUS_CMD_SHIFT; + if (cmd == MAIL_IN_CMD_FLASH_UPDATE_AUTH) { + if (status) + *status = out & MAIL_OUT_STATUS_MASK; + + /* Reset is needed in any case */ + return 1; + } + + return 0; +} + +/** + * dma_port_power_cycle() - Power cycles the switch + * @dma: DMA control port + * + * Triggers power cycle to the switch. + */ +int dma_port_power_cycle(struct tb_dma_port *dma) +{ + u32 in; + + in = MAIL_IN_CMD_POWER_CYCLE << MAIL_IN_CMD_SHIFT; + in |= MAIL_IN_OP_REQUEST; + + return dma_port_request(dma, in, 150); +} diff --git a/drivers/thunderbolt/dma_port.h b/drivers/thunderbolt/dma_port.h new file mode 100644 index 000000000000..c4a69e0fbff7 --- /dev/null +++ b/drivers/thunderbolt/dma_port.h @@ -0,0 +1,34 @@ +/* + * Thunderbolt DMA configuration based mailbox support + * + * Copyright (C) 2017, Intel Corporation + * Authors: Michael Jamet <michael.jamet@intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef DMA_PORT_H_ +#define DMA_PORT_H_ + +#include "tb.h" + +struct tb_switch; +struct tb_dma_port; + +#define DMA_PORT_CSS_ADDRESS 0x3fffff +#define DMA_PORT_CSS_MAX_SIZE SZ_128 + +struct tb_dma_port *dma_port_alloc(struct tb_switch *sw); +void dma_port_free(struct tb_dma_port *dma); +int dma_port_flash_read(struct tb_dma_port *dma, unsigned int address, + void *buf, size_t size); +int dma_port_flash_update_auth(struct tb_dma_port *dma); +int dma_port_flash_update_auth_status(struct tb_dma_port *dma, u32 *status); +int dma_port_flash_write(struct tb_dma_port *dma, unsigned int address, + const void *buf, size_t size); +int dma_port_power_cycle(struct tb_dma_port *dma); + +#endif diff --git a/drivers/thunderbolt/eeprom.c b/drivers/thunderbolt/eeprom.c index d40a5f07fc4c..996c6e29c8ad 100644 --- a/drivers/thunderbolt/eeprom.c +++ b/drivers/thunderbolt/eeprom.c @@ -429,6 +429,50 @@ err: return -EINVAL; } +static int tb_drom_copy_nvm(struct tb_switch *sw, u16 *size) +{ + u32 drom_offset; + int ret; + + if (!sw->dma_port) + return -ENODEV; + + ret = tb_sw_read(sw, &drom_offset, TB_CFG_SWITCH, + sw->cap_plug_events + 12, 1); + if (ret) + return ret; + + if (!drom_offset) + return -ENODEV; + + ret = dma_port_flash_read(sw->dma_port, drom_offset + 14, size, + sizeof(*size)); + if (ret) + return ret; + + /* Size includes CRC8 + UID + CRC32 */ + *size += 1 + 8 + 4; + sw->drom = kzalloc(*size, GFP_KERNEL); + if (!sw->drom) + return -ENOMEM; + + ret = dma_port_flash_read(sw->dma_port, drom_offset, sw->drom, *size); + if (ret) + goto err_free; + + /* + * Read UID from the minimal DROM because the one in NVM is just + * a placeholder. + */ + tb_drom_read_uid_only(sw, &sw->uid); + return 0; + +err_free: + kfree(sw->drom); + sw->drom = NULL; + return ret; +} + /** * tb_drom_read - copy drom to sw->drom and parse it */ @@ -450,6 +494,10 @@ int tb_drom_read(struct tb_switch *sw) if (tb_drom_copy_efi(sw, &size) == 0) goto parse; + /* Non-Apple hardware has the DROM as part of NVM */ + if (tb_drom_copy_nvm(sw, &size) == 0) + goto parse; + /* * The root switch contains only a dummy drom (header only, * no entries). Hardcode the configuration here. @@ -510,7 +558,8 @@ parse: header->uid_crc8, crc); goto err; } - sw->uid = header->uid; + if (!sw->uid) + sw->uid = header->uid; sw->vendor = header->vendor_id; sw->device = header->model_id; diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 6384061100b0..4b47e0999cda 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -377,6 +377,8 @@ static void tb_switch_release(struct device *dev) { struct tb_switch *sw = tb_to_switch(dev); + dma_port_free(sw->dma_port); + kfree(sw->uuid); kfree(sw->device_name); kfree(sw->vendor_name); @@ -570,6 +572,25 @@ static void tb_switch_set_uuid(struct tb_switch *sw) sw->uuid = kmemdup(uuid, sizeof(uuid), GFP_KERNEL); } +static void tb_switch_add_dma_port(struct tb_switch *sw) +{ + switch (sw->generation) { + case 3: + break; + + case 2: + /* Only root switch can be upgraded */ + if (tb_route(sw)) + return; + break; + + default: + return; + } + + sw->dma_port = dma_port_alloc(sw); +} + /** * tb_switch_add() - Add a switch to the domain * @sw: Switch to add @@ -586,6 +607,15 @@ int tb_switch_add(struct tb_switch *sw) { int i, ret; + /* + * Initialize DMA control port now before we read DROM. Recent + * host controllers have more complete DROM on NVM that includes + * vendor and model identification strings which we then expose + * to the userspace. NVM can be accessed through DMA + * configuration based mailbox. + */ + tb_switch_add_dma_port(sw); + /* read drom */ ret = tb_drom_read(sw); if (ret) { diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index 39d24dff82c5..31521c531715 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -12,12 +12,16 @@ #include "tb_regs.h" #include "ctl.h" +#include "dma_port.h" /** * struct tb_switch - a thunderbolt switch * @dev: Device for the switch * @config: Switch configuration * @ports: Ports in this switch + * @dma_port: If the switch has port supporting DMA configuration based + * mailbox this will hold the pointer to that (%NULL + * otherwise). * @tb: Pointer to the domain the switch belongs to * @uid: Unique ID of the switch * @uuid: UUID of the switch (or %NULL if not supported) @@ -34,6 +38,7 @@ struct tb_switch { struct device dev; struct tb_regs_switch_header config; struct tb_port *ports; + struct tb_dma_port *dma_port; struct tb *tb; u64 uid; uuid_be *uuid; |