diff options
Diffstat (limited to 'drivers/staging')
| -rw-r--r-- | drivers/staging/hikey9xx/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/staging/hikey9xx/Makefile | 2 | ||||
| -rw-r--r-- | drivers/staging/hikey9xx/phy-hi3670-usb3.c | 661 | ||||
| -rw-r--r-- | drivers/staging/hikey9xx/phy-hi3670-usb3.yaml | 73 |
4 files changed, 0 insertions, 747 deletions
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig index c4dc1016edf2..3ceda03f2864 100644 --- a/drivers/staging/hikey9xx/Kconfig +++ b/drivers/staging/hikey9xx/Kconfig @@ -1,16 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -# to be placed at drivers/phy -config PHY_HI3670_USB - tristate "hi3670 USB PHY support" - depends on (ARCH_HISI && ARM64) || COMPILE_TEST - select GENERIC_PHY - select MFD_SYSCON - help - Enable this to support the HISILICON HI3670 USB PHY. - - To compile this driver as a module, choose M here. - # to be placed at drivers/spmi config SPMI_HISI3670 tristate "Hisilicon 3670 SPMI Controller" diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile index 9103735d8377..42d486104525 100644 --- a/drivers/staging/hikey9xx/Makefile +++ b/drivers/staging/hikey9xx/Makefile @@ -1,6 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o - obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o diff --git a/drivers/staging/hikey9xx/phy-hi3670-usb3.c b/drivers/staging/hikey9xx/phy-hi3670-usb3.c deleted file mode 100644 index b9ffe08abaab..000000000000 --- a/drivers/staging/hikey9xx/phy-hi3670-usb3.c +++ /dev/null @@ -1,661 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Phy provider for USB 3.1 controller on HiSilicon Kirin970 platform - * - * Copyright (C) 2017-2020 Hilisicon Electronics Co., Ltd. - * http://www.huawei.com - * - * Authors: Yu Chen <chenyu56@huawei.com> - */ - -#include <linux/bitfield.h> -#include <linux/clk.h> -#include <linux/kernel.h> -#include <linux/mfd/syscon.h> -#include <linux/module.h> -#include <linux/phy/phy.h> -#include <linux/platform_device.h> -#include <linux/regmap.h> - -#define SCTRL_SCDEEPSLEEPED (0x0) -#define USB_CLK_SELECTED BIT(20) - -#define PERI_CRG_PEREN0 (0x00) -#define PERI_CRG_PERDIS0 (0x04) -#define PERI_CRG_PEREN4 (0x40) -#define PERI_CRG_PERDIS4 (0x44) -#define PERI_CRG_PERRSTEN4 (0x90) -#define PERI_CRG_PERRSTDIS4 (0x94) -#define PERI_CRG_ISODIS (0x148) -#define PERI_CRG_PEREN6 (0x410) -#define PERI_CRG_PERDIS6 (0x414) - -#define USB_REFCLK_ISO_EN BIT(25) - -#define GT_CLK_USB2PHY_REF BIT(19) - -#define PCTRL_PERI_CTRL3 (0x10) -#define PCTRL_PERI_CTRL3_MSK_START (16) -#define USB_TCXO_EN BIT(1) - -#define PCTRL_PERI_CTRL24 (0x64) -#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25) - -#define USB3OTG_CTRL0 (0x00) -#define USB3OTG_CTRL3 (0x0c) -#define USB3OTG_CTRL4 (0x10) -#define USB3OTG_CTRL5 (0x14) -#define USB3OTG_CTRL7 (0x1c) -#define USB_MISC_CFG50 (0x50) -#define USB_MISC_CFG54 (0x54) -#define USB_MISC_CFG58 (0x58) -#define USB_MISC_CFG5C (0x5c) -#define USB_MISC_CFGA0 (0xa0) -#define TCA_CLK_RST (0x200) -#define TCA_INTR_EN (0x204) -#define TCA_INTR_STS (0x208) -#define TCA_GCFG (0x210) -#define TCA_TCPC (0x214) -#define TCA_SYSMODE_CFG (0x218) -#define TCA_VBUS_CTRL (0x240) - -#define CTRL0_USB3_VBUSVLD BIT(7) -#define CTRL0_USB3_VBUSVLD_SEL BIT(6) - -#define CTRL3_USB2_VBUSVLDEXT0 BIT(6) -#define CTRL3_USB2_VBUSVLDEXTSEL0 BIT(5) - -#define CTRL5_USB2_SIDDQ BIT(0) - -#define CTRL7_USB2_REFCLKSEL_MASK GENMASK(4, 3) -#define CTRL7_USB2_REFCLKSEL_ABB (BIT(4) | BIT(3)) -#define CTRL7_USB2_REFCLKSEL_PAD BIT(4) - -#define CFG50_USB3_PHY_TEST_POWERDOWN BIT(23) - -#define CFG54_USB31PHY_CR_ADDR_MASK GENMASK(31, 16) - -#define CFG54_USB3PHY_REF_USE_PAD BIT(12) -#define CFG54_PHY0_PMA_PWR_STABLE BIT(11) -#define CFG54_PHY0_PCS_PWR_STABLE BIT(9) -#define CFG54_USB31PHY_CR_ACK BIT(7) -#define CFG54_USB31PHY_CR_WR_EN BIT(5) -#define CFG54_USB31PHY_CR_SEL BIT(4) -#define CFG54_USB31PHY_CR_RD_EN BIT(3) -#define CFG54_USB31PHY_CR_CLK BIT(2) -#define CFG54_USB3_PHY0_ANA_PWR_EN BIT(1) - -#define CFG58_USB31PHY_CR_DATA_MASK GENMASK(31, 16) - -#define CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN BIT(1) - -#define CFGA0_VAUX_RESET BIT(9) -#define CFGA0_USB31C_RESET BIT(8) -#define CFGA0_USB2PHY_REFCLK_SELECT BIT(4) -#define CFGA0_USB3PHY_RESET BIT(1) -#define CFGA0_USB2PHY_POR BIT(0) - -#define INTR_EN_XA_TIMEOUT_EVT_EN BIT(1) -#define INTR_EN_XA_ACK_EVT_EN BIT(0) - -#define CLK_RST_TCA_REF_CLK_EN BIT(1) -#define CLK_RST_SUSPEND_CLK_EN BIT(0) - -#define GCFG_ROLE_HSTDEV BIT(4) -#define GCFG_OP_MODE GENMASK(1, 0) -#define GCFG_OP_MODE_CTRL_SYNC_MODE BIT(0) - -#define TCPC_VALID BIT(4) -#define TCPC_LOW_POWER_EN BIT(3) -#define TCPC_MUX_CONTROL_MASK GENMASK(1, 0) -#define TCPC_MUX_CONTROL_USB31 BIT(0) - -#define SYSMODE_CFG_TYPEC_DISABLE BIT(3) - -#define VBUS_CTRL_POWERPRESENT_OVERRD GENMASK(3, 2) -#define VBUS_CTRL_VBUSVALID_OVERRD GENMASK(1, 0) - -#define KIRIN970_USB_DEFAULT_PHY_PARAM (0xfdfee4) -#define KIRIN970_USB_DEFAULT_PHY_VBOOST (0x5) - -#define TX_VBOOST_LVL_REG (0xf) -#define TX_VBOOST_LVL_START (6) -#define TX_VBOOST_LVL_ENABLE BIT(9) - -struct hi3670_priv { - struct device *dev; - struct regmap *peri_crg; - struct regmap *pctrl; - struct regmap *sctrl; - struct regmap *usb31misc; - - u32 eye_diagram_param; - u32 tx_vboost_lvl; - - u32 peri_crg_offset; - u32 pctrl_offset; - u32 usb31misc_offset; -}; - -static int hi3670_phy_cr_clk(struct regmap *usb31misc) -{ - int ret; - - /* Clock up */ - ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, - CFG54_USB31PHY_CR_CLK, CFG54_USB31PHY_CR_CLK); - if (ret) - return ret; - - /* Clock down */ - return regmap_update_bits(usb31misc, USB_MISC_CFG54, - CFG54_USB31PHY_CR_CLK, 0); -} - -static int hi3670_phy_cr_set_sel(struct regmap *usb31misc) -{ - return regmap_update_bits(usb31misc, USB_MISC_CFG54, - CFG54_USB31PHY_CR_SEL, CFG54_USB31PHY_CR_SEL); -} - -static int hi3670_phy_cr_start(struct regmap *usb31misc, int direction) -{ - int ret, reg; - - if (direction) - reg = CFG54_USB31PHY_CR_WR_EN; - else - reg = CFG54_USB31PHY_CR_RD_EN; - - ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, reg, reg); - - if (ret) - return ret; - - ret = hi3670_phy_cr_clk(usb31misc); - if (ret) - return ret; - - return regmap_update_bits(usb31misc, USB_MISC_CFG54, - CFG54_USB31PHY_CR_RD_EN | CFG54_USB31PHY_CR_WR_EN, 0); -} - -static int hi3670_phy_cr_wait_ack(struct regmap *usb31misc) -{ - u32 reg; - int retry = 10; - int ret; - - while (retry-- > 0) { - ret = regmap_read(usb31misc, USB_MISC_CFG54, ®); - if (ret) - return ret; - if ((reg & CFG54_USB31PHY_CR_ACK) == CFG54_USB31PHY_CR_ACK) - return 0; - - ret = hi3670_phy_cr_clk(usb31misc); - if (ret) - return ret; - - usleep_range(10, 20); - } - - return -ETIMEDOUT; -} - -static int hi3670_phy_cr_set_addr(struct regmap *usb31misc, u32 addr) -{ - u32 reg; - int ret; - - ret = regmap_read(usb31misc, USB_MISC_CFG54, ®); - if (ret) - return ret; - - reg = FIELD_PREP(CFG54_USB31PHY_CR_ADDR_MASK, addr); - - return regmap_update_bits(usb31misc, USB_MISC_CFG54, - CFG54_USB31PHY_CR_ADDR_MASK, reg); -} - -static int hi3670_phy_cr_read(struct regmap *usb31misc, u32 addr, u32 *val) -{ - int reg, i, ret; - - for (i = 0; i < 100; i++) { - ret = hi3670_phy_cr_clk(usb31misc); - if (ret) - return ret; - } - - ret = hi3670_phy_cr_set_sel(usb31misc); - if (ret) - return ret; - - ret = hi3670_phy_cr_set_addr(usb31misc, addr); - if (ret) - return ret; - - ret = hi3670_phy_cr_start(usb31misc, 0); - if (ret) - return ret; - - ret = hi3670_phy_cr_wait_ack(usb31misc); - if (ret) - return ret; - - ret = regmap_read(usb31misc, USB_MISC_CFG58, ®); - if (ret) - return ret; - - *val = FIELD_GET(CFG58_USB31PHY_CR_DATA_MASK, reg); - - return 0; -} - -static int hi3670_phy_cr_write(struct regmap *usb31misc, u32 addr, u32 val) -{ - int i; - int ret; - - for (i = 0; i < 100; i++) { - ret = hi3670_phy_cr_clk(usb31misc); - if (ret) - return ret; - } - - ret = hi3670_phy_cr_set_sel(usb31misc); - if (ret) - return ret; - - ret = hi3670_phy_cr_set_addr(usb31misc, addr); - if (ret) - return ret; - - ret = regmap_write(usb31misc, USB_MISC_CFG58, - FIELD_PREP(CFG58_USB31PHY_CR_DATA_MASK, val)); - if (ret) - return ret; - - ret = hi3670_phy_cr_start(usb31misc, 1); - if (ret) - return ret; - - return hi3670_phy_cr_wait_ack(usb31misc); -} - -static int hi3670_phy_set_params(struct hi3670_priv *priv) -{ - u32 reg; - int ret; - int retry = 3; - - ret = regmap_write(priv->usb31misc, USB3OTG_CTRL4, - priv->eye_diagram_param); - if (ret) { - dev_err(priv->dev, "set USB3OTG_CTRL4 failed\n"); - return ret; - } - - while (retry-- > 0) { - ret = hi3670_phy_cr_read(priv->usb31misc, - TX_VBOOST_LVL_REG, ®); - if (!ret) - break; - - if (ret != -ETIMEDOUT) { - dev_err(priv->dev, "read TX_VBOOST_LVL_REG failed\n"); - return ret; - } - } - if (ret) - return ret; - - reg |= (TX_VBOOST_LVL_ENABLE | (priv->tx_vboost_lvl << TX_VBOOST_LVL_START)); - ret = hi3670_phy_cr_write(priv->usb31misc, TX_VBOOST_LVL_REG, reg); - if (ret) - dev_err(priv->dev, "write TX_VBOOST_LVL_REG failed\n"); - - return ret; -} - -static bool hi3670_is_abbclk_selected(struct hi3670_priv *priv) -{ - u32 reg; - - if (!priv->sctrl) { - dev_err(priv->dev, "priv->sctrl is null!\n"); - return false; - } - - if (regmap_read(priv->sctrl, SCTRL_SCDEEPSLEEPED, ®)) { - dev_err(priv->dev, "SCTRL_SCDEEPSLEEPED read failed!\n"); - return false; - } - - if ((reg & USB_CLK_SELECTED) == 0) - return false; - - return true; -} - -static int hi3670_config_phy_clock(struct hi3670_priv *priv) -{ - u32 val, mask; - int ret; - - if (!hi3670_is_abbclk_selected(priv)) { - /* usb refclk iso disable */ - ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, - USB_REFCLK_ISO_EN); - if (ret) - goto out; - - /* enable usb_tcxo_en */ - ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, - USB_TCXO_EN | - (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START)); - - /* select usbphy clk from abb */ - mask = SC_CLK_USB3PHY_3MUX1_SEL; - ret = regmap_update_bits(priv->pctrl, - PCTRL_PERI_CTRL24, mask, 0); - if (ret) - goto out; - - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, - CFGA0_USB2PHY_REFCLK_SELECT, 0); - if (ret) - goto out; - - ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val); - if (ret) - goto out; - val &= ~CTRL7_USB2_REFCLKSEL_MASK; - val |= CTRL7_USB2_REFCLKSEL_ABB; - ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val); - if (ret) - goto out; - - return 0; - } - - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54, - CFG54_USB3PHY_REF_USE_PAD, - CFG54_USB3PHY_REF_USE_PAD); - if (ret) - goto out; - - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, - CFGA0_USB2PHY_REFCLK_SELECT, - CFGA0_USB2PHY_REFCLK_SELECT); - if (ret) - goto out; - - ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val); - if (ret) - goto out; - val &= ~CTRL7_USB2_REFCLKSEL_MASK; - val |= CTRL7_USB2_REFCLKSEL_PAD; - ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val); - if (ret) - goto out; - - ret = regmap_write(priv->peri_crg, - PERI_CRG_PEREN6, GT_CLK_USB2PHY_REF); - if (ret) - goto out; - - return 0; -out: - dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret); - return ret; -} - -static int hi3670_config_tca(struct hi3670_priv *priv) -{ - u32 val, mask; - int ret; - - ret = regmap_write(priv->usb31misc, TCA_INTR_STS, 0xffff); - if (ret) - goto out; - - ret = regmap_write(priv->usb31misc, TCA_INTR_EN, - INTR_EN_XA_TIMEOUT_EVT_EN | INTR_EN_XA_ACK_EVT_EN); - if (ret) - goto out; - - mask = CLK_RST_TCA_REF_CLK_EN | CLK_RST_SUSPEND_CLK_EN; - ret = regmap_update_bits(priv->usb31misc, TCA_CLK_RST, mask, 0); - if (ret) - goto out; - - ret = regmap_update_bits(priv->usb31misc, TCA_GCFG, - GCFG_ROLE_HSTDEV | GCFG_OP_MODE, - GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE); - if (ret) - goto out; - - ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG, - SYSMODE_CFG_TYPEC_DISABLE, 0); - if (ret) - goto out; - - ret = regmap_read(priv->usb31misc, TCA_TCPC, &val); - if (ret) - goto out; - val &= ~(TCPC_VALID | TCPC_LOW_POWER_EN | TCPC_MUX_CONTROL_MASK); - val |= (TCPC_VALID | TCPC_MUX_CONTROL_USB31); - ret = regmap_write(priv->usb31misc, TCA_TCPC, val); - if (ret) - goto out; - - ret = regmap_write(priv->usb31misc, TCA_VBUS_CTRL, - VBUS_CTRL_POWERPRESENT_OVERRD | VBUS_CTRL_VBUSVALID_OVERRD); - if (ret) - goto out; - - return 0; -out: - dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret); - return ret; -} - -static int hi3670_phy_init(struct phy *phy) -{ - struct hi3670_priv *priv = phy_get_drvdata(phy); - u32 val; - int ret; - - /* assert controller */ - val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET | - CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR; - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0); - if (ret) - goto out; - - ret = hi3670_config_phy_clock(priv); - if (ret) - goto out; - - /* Exit from IDDQ mode */ - ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL5, - CTRL5_USB2_SIDDQ, 0); - if (ret) - goto out; - - /* Release USB31 PHY out of TestPowerDown mode */ - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG50, - CFG50_USB3_PHY_TEST_POWERDOWN, 0); - if (ret) - goto out; - - /* Deassert phy */ - val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR; - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val); - if (ret) - goto out; - - usleep_range(100, 120); - - /* Tell the PHY power is stable */ - val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE | - CFG54_PHY0_PMA_PWR_STABLE; - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54, - val, val); - if (ret) - goto out; - - ret = hi3670_config_tca(priv); - if (ret) - goto out; - - /* Enable SSC */ - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG5C, - CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN, - CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN); - if (ret) - goto out; - - /* Deassert controller */ - val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET; - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val); - if (ret) - goto out; - - usleep_range(100, 120); - - /* Set fake vbus valid signal */ - val = CTRL0_USB3_VBUSVLD | CTRL0_USB3_VBUSVLD_SEL; - ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL0, val, val); - if (ret) - goto out; - - val = CTRL3_USB2_VBUSVLDEXT0 | CTRL3_USB2_VBUSVLDEXTSEL0; - ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL3, val, val); - if (ret) - goto out; - - usleep_range(100, 120); - - ret = hi3670_phy_set_params(priv); - if (ret) - goto out; - - return 0; -out: - dev_err(priv->dev, "failed to init phy ret: %d\n", ret); - return ret; -} - -static int hi3670_phy_exit(struct phy *phy) -{ - struct hi3670_priv *priv = phy_get_drvdata(phy); - u32 mask; - int ret; - - /* Assert phy */ - mask = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR; - ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, mask, 0); - if (ret) - goto out; - - if (!hi3670_is_abbclk_selected(priv)) { - /* disable usb_tcxo_en */ - ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, - USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START); - } else { - ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6, - GT_CLK_USB2PHY_REF); - if (ret) - goto out; - } - - return 0; -out: - dev_err(priv->dev, "failed to exit phy ret: %d\n", ret); - return ret; -} - -static const struct phy_ops hi3670_phy_ops = { - .init = hi3670_phy_init, - .exit = hi3670_phy_exit, - .owner = THIS_MODULE, -}; - -static int hi3670_phy_probe(struct platform_device *pdev) -{ - struct phy_provider *phy_provider; - struct device *dev = &pdev->dev; - struct phy *phy; - struct hi3670_priv *priv; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->dev = dev; - priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node, - "hisilicon,pericrg-syscon"); - if (IS_ERR(priv->peri_crg)) { - dev_err(dev, "no hisilicon,pericrg-syscon\n"); - return PTR_ERR(priv->peri_crg); - } - - priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node, - "hisilicon,pctrl-syscon"); - if (IS_ERR(priv->pctrl)) { - dev_err(dev, "no hisilicon,pctrl-syscon\n"); - return PTR_ERR(priv->pctrl); - } - - priv->sctrl = syscon_regmap_lookup_by_phandle(dev->of_node, - "hisilicon,sctrl-syscon"); - if (IS_ERR(priv->sctrl)) { - dev_err(dev, "no hisilicon,sctrl-syscon\n"); - return PTR_ERR(priv->sctrl); - } - - /* node of hi3670 phy is a sub-node of usb3_otg_bc */ - priv->usb31misc = syscon_node_to_regmap(dev->parent->of_node); - if (IS_ERR(priv->usb31misc)) { - dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n"); - return PTR_ERR(priv->usb31misc); - } - - if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param", - &priv->eye_diagram_param)) - priv->eye_diagram_param = KIRIN970_USB_DEFAULT_PHY_PARAM; - - if (of_property_read_u32(dev->of_node, "hisilicon,tx-vboost-lvl", - &priv->tx_vboost_lvl)) - priv->tx_vboost_lvl = KIRIN970_USB_DEFAULT_PHY_VBOOST; - - phy = devm_phy_create(dev, NULL, &hi3670_phy_ops); - if (IS_ERR(phy)) - return PTR_ERR(phy); - - phy_set_drvdata(phy, priv); - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - return PTR_ERR_OR_ZERO(phy_provider); -} - -static const struct of_device_id hi3670_phy_of_match[] = { - { .compatible = "hisilicon,hi3670-usb-phy" }, - { }, -}; -MODULE_DEVICE_TABLE(of, hi3670_phy_of_match); - -static struct platform_driver hi3670_phy_driver = { - .probe = hi3670_phy_probe, - .driver = { - .name = "hi3670-usb-phy", - .of_match_table = hi3670_phy_of_match, - } -}; -module_platform_driver(hi3670_phy_driver); - -MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>"); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Hilisicon Kirin970 USB31 PHY Driver"); diff --git a/drivers/staging/hikey9xx/phy-hi3670-usb3.yaml b/drivers/staging/hikey9xx/phy-hi3670-usb3.yaml deleted file mode 100644 index ebd78acfe2de..000000000000 --- a/drivers/staging/hikey9xx/phy-hi3670-usb3.yaml +++ /dev/null @@ -1,73 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Hisilicon Kirin970 USB PHY - -maintainers: - - Mauro Carvalho Chehab <mchehab+huawei@kernel.org> - -description: |+ - Bindings for USB3 PHY on HiSilicon Kirin 970. - -properties: - compatible: - const: hisilicon,hi3670-usb-phy - - "#phy-cells": - const: 0 - - hisilicon,pericrg-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: phandle of syscon used to control iso refclk. - - hisilicon,pctrl-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: phandle of syscon used to control usb tcxo. - - hisilicon,sctrl-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: phandle of syscon used to control phy deep sleep. - - hisilicon,eye-diagram-param: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Eye diagram for phy. - - hisilicon,tx-vboost-lvl: - $ref: /schemas/types.yaml#/definitions/uint32 - description: TX level vboost for phy. - -required: - - compatible - - hisilicon,pericrg-syscon - - hisilicon,pctrl-syscon - - hisilicon,sctrl-syscon - - hisilicon,eye-diagram-param - - hisilicon,tx-vboost-lvl - - "#phy-cells" - -additionalProperties: false - -examples: - - | - bus { - #address-cells = <2>; - #size-cells = <2>; - - usb3_otg_bc: usb3_otg_bc@ff200000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0xff200000 0x0 0x1000>; - - usb_phy { - compatible = "hisilicon,hi3670-usb-phy"; - #phy-cells = <0>; - hisilicon,pericrg-syscon = <&crg_ctrl>; - hisilicon,pctrl-syscon = <&pctrl>; - hisilicon,sctrl-syscon = <&sctrl>; - hisilicon,eye-diagram-param = <0xfdfee4>; - hisilicon,tx-vboost-lvl = <0x5>; - }; - }; - }; |