diff options
Diffstat (limited to 'drivers/staging/rt3070/aironet.h')
| -rw-r--r-- | drivers/staging/rt3070/aironet.h | 211 |
1 files changed, 1 insertions, 210 deletions
diff --git a/drivers/staging/rt3070/aironet.h b/drivers/staging/rt3070/aironet.h index 1e07b19b8cdc..78088f2087ef 100644 --- a/drivers/staging/rt3070/aironet.h +++ b/drivers/staging/rt3070/aironet.h @@ -1,210 +1 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* - - Module Name: - aironet.h - - Abstract: - - Revision History: - Who When What - -------- ---------- ---------------------------------------------- - Name Date Modification logs - Paul Lin 04-06-15 Initial -*/ - -#ifndef __AIRONET_H__ -#define __AIRONET_H__ - -// Measurement Type definition -#define MSRN_TYPE_UNUSED 0 -#define MSRN_TYPE_CHANNEL_LOAD_REQ 1 -#define MSRN_TYPE_NOISE_HIST_REQ 2 -#define MSRN_TYPE_BEACON_REQ 3 -#define MSRN_TYPE_FRAME_REQ 4 - -// Scan Mode in Beacon Request -#define MSRN_SCAN_MODE_PASSIVE 0 -#define MSRN_SCAN_MODE_ACTIVE 1 -#define MSRN_SCAN_MODE_BEACON_TABLE 2 - -// PHY type definition for Aironet beacon report, CCX 2 table 36-9 -#define PHY_FH 1 -#define PHY_DSS 2 -#define PHY_UNUSED 3 -#define PHY_OFDM 4 -#define PHY_HR_DSS 5 -#define PHY_ERP 6 - -// RPI table in dBm -#define RPI_0 0 // Power <= -87 -#define RPI_1 1 // -87 < Power <= -82 -#define RPI_2 2 // -82 < Power <= -77 -#define RPI_3 3 // -77 < Power <= -72 -#define RPI_4 4 // -72 < Power <= -67 -#define RPI_5 5 // -67 < Power <= -62 -#define RPI_6 6 // -62 < Power <= -57 -#define RPI_7 7 // -57 < Power - -// Cisco Aironet IAPP definetions -#define AIRONET_IAPP_TYPE 0x32 -#define AIRONET_IAPP_SUBTYPE_REQUEST 0x01 -#define AIRONET_IAPP_SUBTYPE_REPORT 0x81 - -// Measurement Request detail format -typedef struct _MEASUREMENT_REQUEST { - UCHAR Channel; - UCHAR ScanMode; // Use only in beacon request, other requests did not use this field - USHORT Duration; -} MEASUREMENT_REQUEST, *PMEASUREMENT_REQUEST; - -// Beacon Measurement Report -// All these field might change to UCHAR, because we didn't do anything to these report. -// We copy all these beacons and report to CCX 2 AP. -typedef struct _BEACON_REPORT { - UCHAR Channel; - UCHAR Spare; - USHORT Duration; - UCHAR PhyType; // Definiation is listed above table 36-9 - UCHAR RxPower; - UCHAR BSSID[6]; - UCHAR ParentTSF[4]; - UCHAR TargetTSF[8]; - USHORT BeaconInterval; - USHORT CapabilityInfo; -} BEACON_REPORT, *PBEACON_REPORT; - -// Frame Measurement Report (Optional) -typedef struct _FRAME_REPORT { - UCHAR Channel; - UCHAR Spare; - USHORT Duration; - UCHAR TA; - UCHAR BSSID[6]; - UCHAR RSSI; - UCHAR Count; -} FRAME_REPORT, *PFRAME_REPORT; - -#pragma pack(1) -// Channel Load Report -typedef struct _CHANNEL_LOAD_REPORT { - UCHAR Channel; - UCHAR Spare; - USHORT Duration; - UCHAR CCABusy; -} CHANNEL_LOAD_REPORT, *PCHANNEL_LOAD_REPORT; -#pragma pack() - -// Nosie Histogram Report -typedef struct _NOISE_HIST_REPORT { - UCHAR Channel; - UCHAR Spare; - USHORT Duration; - UCHAR Density[8]; -} NOISE_HIST_REPORT, *PNOISE_HIST_REPORT; - -// Radio Management Capability element -typedef struct _RADIO_MANAGEMENT_CAPABILITY { - UCHAR Eid; // TODO: Why the Eid is 1 byte, not normal 2 bytes??? - UCHAR Length; - UCHAR AironetOui[3]; // AIronet OUI (00 40 96) - UCHAR Type; // Type / Version - USHORT Status; // swap16 required -} RADIO_MANAGEMENT_CAPABILITY, *PRADIO_MANAGEMENT_CAPABILITY; - -// Measurement Mode Bit definition -typedef struct _MEASUREMENT_MODE { - UCHAR Rsvd:4; - UCHAR Report:1; - UCHAR NotUsed:1; - UCHAR Enable:1; - UCHAR Parallel:1; -} MEASUREMENT_MODE, *PMEASUREMENT_MODE; - -// Measurement Request element, This is little endian mode -typedef struct _MEASUREMENT_REQUEST_ELEMENT { - USHORT Eid; - USHORT Length; // swap16 required - USHORT Token; // non-zero unique token - UCHAR Mode; // Measurement Mode - UCHAR Type; // Measurement type -} MEASUREMENT_REQUEST_ELEMENT, *PMEASUREMENT_REQUEST_ELEMENT; - -// Measurement Report element, This is little endian mode -typedef struct _MEASUREMENT_REPORT_ELEMENT { - USHORT Eid; - USHORT Length; // swap16 required - USHORT Token; // non-zero unique token - UCHAR Mode; // Measurement Mode - UCHAR Type; // Measurement type -} MEASUREMENT_REPORT_ELEMENT, *PMEASUREMENT_REPORT_ELEMENT; - -// Cisco Aironet IAPP Frame Header, Network byte order used -typedef struct _AIRONET_IAPP_HEADER { - UCHAR CiscoSnapHeader[8]; // 8 bytes Cisco snap header - USHORT Length; // IAPP ID & length, remember to swap16 in LE system - UCHAR Type; // IAPP type - UCHAR SubType; // IAPP subtype - UCHAR DA[6]; // Destination MAC address - UCHAR SA[6]; // Source MAC address - USHORT Token; // Dialog token, no need to swap16 since it is for yoken usage only -} AIRONET_IAPP_HEADER, *PAIRONET_IAPP_HEADER; - -// Radio Measurement Request frame -typedef struct _AIRONET_RM_REQUEST_FRAME { - AIRONET_IAPP_HEADER IAPP; // Common header - UCHAR Delay; // Activation Delay - UCHAR Offset; // Measurement offset -} AIRONET_RM_REQUEST_FRAME, *PAIRONET_RM_REQUEST_FRAME; - -// Radio Measurement Report frame -typedef struct _AIRONET_RM_REPORT_FRAME { - AIRONET_IAPP_HEADER IAPP; // Common header -} AIRONET_RM_REPORT_FRAME, *PAIRONET_RM_REPORT_FRAME; - -// Saved element request actions which will saved in StaCfg. -typedef struct _RM_REQUEST_ACTION { - MEASUREMENT_REQUEST_ELEMENT ReqElem; // Saved request element - MEASUREMENT_REQUEST Measurement; // Saved measurement within the request element -} RM_REQUEST_ACTION, *PRM_REQUEST_ACTION; - -// CCX administration control -typedef union _CCX_CONTROL { - struct { - UINT32 Enable:1; // Enable CCX2 - UINT32 LeapEnable:1; // Enable LEAP at CCX2 - UINT32 RMEnable:1; // Radio Measurement Enable - UINT32 DCRMEnable:1; // Non serving channel Radio Measurement enable - UINT32 QOSEnable:1; // Enable QOS for CCX 2.0 support - UINT32 FastRoamEnable:1; // Enable fast roaming - UINT32 Rsvd:2; // Not used - UINT32 dBmToRoam:8; // the condition to roam when receiving Rssi less than this value. It's negative value. - UINT32 TuLimit:16; // Limit for different channel scan - } field; - UINT32 word; -} CCX_CONTROL, *PCCX_CONTROL; - -#endif // __AIRONET_H__ +#include "../rt2870/aironet.h" |