diff options
Diffstat (limited to 'drivers/soc')
| -rw-r--r-- | drivers/soc/qcom/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/soc/qcom/Makefile | 1 | ||||
| -rw-r--r-- | drivers/soc/qcom/glink_ssr.c | 156 |
3 files changed, 0 insertions, 166 deletions
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 250a393f255d..07bb261a63d2 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -35,15 +35,6 @@ config QCOM_GENI_SE driver is also used to manage the common aspects of multiple Serial Engines present in the QUP. -config QCOM_GLINK_SSR - tristate "Qualcomm Glink SSR driver" - depends on RPMSG - depends on QCOM_RPROC_COMMON - help - Say y here to enable GLINK SSR support. The GLINK SSR driver - implements the SSR protocol for notifying the remote processor about - neighboring subsystems going up or down. - config QCOM_GSBI tristate "QCOM General Serial Bus Interface" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 92cc4232d72c..7d7e2ecbdce6 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -3,7 +3,6 @@ CFLAGS_rpmh-rsc.o := -I$(src) obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o -obj-$(CONFIG_QCOM_GLINK_SSR) += glink_ssr.o obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o obj-$(CONFIG_QCOM_OCMEM) += ocmem.o diff --git a/drivers/soc/qcom/glink_ssr.c b/drivers/soc/qcom/glink_ssr.c deleted file mode 100644 index d7babe3d67bc..000000000000 --- a/drivers/soc/qcom/glink_ssr.c +++ /dev/null @@ -1,156 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Linaro Ltd. - */ - -#include <linux/completion.h> -#include <linux/module.h> -#include <linux/notifier.h> -#include <linux/rpmsg.h> -#include <linux/remoteproc/qcom_rproc.h> - -/** - * struct do_cleanup_msg - The data structure for an SSR do_cleanup message - * version: The G-Link SSR protocol version - * command: The G-Link SSR command - do_cleanup - * seq_num: Sequence number - * name_len: Length of the name of the subsystem being restarted - * name: G-Link edge name of the subsystem being restarted - */ -struct do_cleanup_msg { - __le32 version; - __le32 command; - __le32 seq_num; - __le32 name_len; - char name[32]; -}; - -/** - * struct cleanup_done_msg - The data structure for an SSR cleanup_done message - * version: The G-Link SSR protocol version - * response: The G-Link SSR response to a do_cleanup command, cleanup_done - * seq_num: Sequence number - */ -struct cleanup_done_msg { - __le32 version; - __le32 response; - __le32 seq_num; -}; - -/** - * G-Link SSR protocol commands - */ -#define GLINK_SSR_DO_CLEANUP 0 -#define GLINK_SSR_CLEANUP_DONE 1 - -struct glink_ssr { - struct device *dev; - struct rpmsg_endpoint *ept; - - struct notifier_block nb; - - u32 seq_num; - struct completion completion; -}; - -static int qcom_glink_ssr_callback(struct rpmsg_device *rpdev, - void *data, int len, void *priv, u32 addr) -{ - struct cleanup_done_msg *msg = data; - struct glink_ssr *ssr = dev_get_drvdata(&rpdev->dev); - - if (len < sizeof(*msg)) { - dev_err(ssr->dev, "message too short\n"); - return -EINVAL; - } - - if (le32_to_cpu(msg->version) != 0) - return -EINVAL; - - if (le32_to_cpu(msg->response) != GLINK_SSR_CLEANUP_DONE) - return 0; - - if (le32_to_cpu(msg->seq_num) != ssr->seq_num) { - dev_err(ssr->dev, "invalid sequence number of response\n"); - return -EINVAL; - } - - complete(&ssr->completion); - - return 0; -} - -static int qcom_glink_ssr_notify(struct notifier_block *nb, unsigned long event, - void *data) -{ - struct glink_ssr *ssr = container_of(nb, struct glink_ssr, nb); - struct do_cleanup_msg msg; - char *ssr_name = data; - int ret; - - ssr->seq_num++; - reinit_completion(&ssr->completion); - - memset(&msg, 0, sizeof(msg)); - msg.command = cpu_to_le32(GLINK_SSR_DO_CLEANUP); - msg.seq_num = cpu_to_le32(ssr->seq_num); - msg.name_len = cpu_to_le32(strlen(ssr_name)); - strlcpy(msg.name, ssr_name, sizeof(msg.name)); - - ret = rpmsg_send(ssr->ept, &msg, sizeof(msg)); - if (ret < 0) - dev_err(ssr->dev, "failed to send cleanup message\n"); - - ret = wait_for_completion_timeout(&ssr->completion, HZ); - if (!ret) - dev_err(ssr->dev, "timeout waiting for cleanup done message\n"); - - return NOTIFY_DONE; -} - -static int qcom_glink_ssr_probe(struct rpmsg_device *rpdev) -{ - struct glink_ssr *ssr; - - ssr = devm_kzalloc(&rpdev->dev, sizeof(*ssr), GFP_KERNEL); - if (!ssr) - return -ENOMEM; - - init_completion(&ssr->completion); - - ssr->dev = &rpdev->dev; - ssr->ept = rpdev->ept; - ssr->nb.notifier_call = qcom_glink_ssr_notify; - - dev_set_drvdata(&rpdev->dev, ssr); - - return qcom_register_ssr_notifier(&ssr->nb); -} - -static void qcom_glink_ssr_remove(struct rpmsg_device *rpdev) -{ - struct glink_ssr *ssr = dev_get_drvdata(&rpdev->dev); - - qcom_unregister_ssr_notifier(&ssr->nb); -} - -static const struct rpmsg_device_id qcom_glink_ssr_match[] = { - { "glink_ssr" }, - {} -}; - -static struct rpmsg_driver qcom_glink_ssr_driver = { - .probe = qcom_glink_ssr_probe, - .remove = qcom_glink_ssr_remove, - .callback = qcom_glink_ssr_callback, - .id_table = qcom_glink_ssr_match, - .drv = { - .name = "qcom_glink_ssr", - }, -}; -module_rpmsg_driver(qcom_glink_ssr_driver); - -MODULE_ALIAS("rpmsg:glink_ssr"); -MODULE_DESCRIPTION("Qualcomm GLINK SSR notifier"); -MODULE_LICENSE("GPL v2"); |