diff options
Diffstat (limited to 'drivers/scsi/ufs/ufshcd.c')
-rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 166 |
1 files changed, 133 insertions, 33 deletions
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index f2b50bc13ac9..8bbb37d7db41 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -179,6 +179,8 @@ static void ufshcd_hba_exit(struct ufs_hba *hba); static int ufshcd_probe_hba(struct ufs_hba *hba); static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); static irqreturn_t ufshcd_intr(int irq, void *__hba); +static int ufshcd_config_pwr_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *desired_pwr_mode); static inline int ufshcd_enable_irq(struct ufs_hba *hba) { @@ -1958,40 +1960,83 @@ static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba) } /** - * ufshcd_config_max_pwr_mode - Set & Change power mode with - * maximum capability attribute information. - * @hba: per adapter instance - * - * Returns 0 on success, non-zero value on failure + * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device + * @hba: per-adapter instance */ -static int ufshcd_config_max_pwr_mode(struct ufs_hba *hba) +static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba) { - enum {RX = 0, TX = 1}; - u32 lanes[] = {1, 1}; - u32 gear[] = {1, 1}; - u8 pwr[] = {FASTAUTO_MODE, FASTAUTO_MODE}; - int ret; + struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info; + + if (hba->max_pwr_info.is_valid) + return 0; + + pwr_info->pwr_tx = FASTAUTO_MODE; + pwr_info->pwr_rx = FASTAUTO_MODE; + pwr_info->hs_rate = PA_HS_MODE_B; /* Get the connected lane count */ - ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), &lanes[RX]); - ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), &lanes[TX]); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), + &pwr_info->lane_rx); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &pwr_info->lane_tx); + + if (!pwr_info->lane_rx || !pwr_info->lane_tx) { + dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n", + __func__, + pwr_info->lane_rx, + pwr_info->lane_tx); + return -EINVAL; + } /* * First, get the maximum gears of HS speed. * If a zero value, it means there is no HSGEAR capability. * Then, get the maximum gears of PWM speed. */ - ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[RX]); - if (!gear[RX]) { - ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), &gear[RX]); - pwr[RX] = SLOWAUTO_MODE; + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx); + if (!pwr_info->gear_rx) { + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &pwr_info->gear_rx); + if (!pwr_info->gear_rx) { + dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n", + __func__, pwr_info->gear_rx); + return -EINVAL; + } + pwr_info->pwr_rx = SLOWAUTO_MODE; } - ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[TX]); - if (!gear[TX]) { + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), + &pwr_info->gear_tx); + if (!pwr_info->gear_tx) { ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), - &gear[TX]); - pwr[TX] = SLOWAUTO_MODE; + &pwr_info->gear_tx); + if (!pwr_info->gear_tx) { + dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n", + __func__, pwr_info->gear_tx); + return -EINVAL; + } + pwr_info->pwr_tx = SLOWAUTO_MODE; + } + + hba->max_pwr_info.is_valid = true; + return 0; +} + +static int ufshcd_change_power_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *pwr_mode) +{ + int ret; + + /* if already configured to the requested pwr_mode */ + if (pwr_mode->gear_rx == hba->pwr_info.gear_rx && + pwr_mode->gear_tx == hba->pwr_info.gear_tx && + pwr_mode->lane_rx == hba->pwr_info.lane_rx && + pwr_mode->lane_tx == hba->pwr_info.lane_tx && + pwr_mode->pwr_rx == hba->pwr_info.pwr_rx && + pwr_mode->pwr_tx == hba->pwr_info.pwr_tx && + pwr_mode->hs_rate == hba->pwr_info.hs_rate) { + dev_dbg(hba->dev, "%s: power already configured\n", __func__); + return 0; } /* @@ -2000,23 +2045,67 @@ static int ufshcd_config_max_pwr_mode(struct ufs_hba *hba) * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION, * - PA_HSSERIES */ - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), gear[RX]); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), lanes[RX]); - if (pwr[RX] == FASTAUTO_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), + pwr_mode->lane_rx); + if (pwr_mode->pwr_rx == FASTAUTO_MODE || + pwr_mode->pwr_rx == FAST_MODE) ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE); + else + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), FALSE); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), gear[TX]); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), lanes[TX]); - if (pwr[TX] == FASTAUTO_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), + pwr_mode->lane_tx); + if (pwr_mode->pwr_tx == FASTAUTO_MODE || + pwr_mode->pwr_tx == FAST_MODE) ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE); + else + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), FALSE); - if (pwr[RX] == FASTAUTO_MODE || pwr[TX] == FASTAUTO_MODE) - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), PA_HS_MODE_B); + if (pwr_mode->pwr_rx == FASTAUTO_MODE || + pwr_mode->pwr_tx == FASTAUTO_MODE || + pwr_mode->pwr_rx == FAST_MODE || + pwr_mode->pwr_tx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), + pwr_mode->hs_rate); - ret = ufshcd_uic_change_pwr_mode(hba, pwr[RX] << 4 | pwr[TX]); - if (ret) + ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4 + | pwr_mode->pwr_tx); + + if (ret) { dev_err(hba->dev, - "pwr_mode: power mode change failed %d\n", ret); + "%s: power mode change failed %d\n", __func__, ret); + } else { + if (hba->vops && hba->vops->pwr_change_notify) + hba->vops->pwr_change_notify(hba, + POST_CHANGE, NULL, pwr_mode); + + memcpy(&hba->pwr_info, pwr_mode, + sizeof(struct ufs_pa_layer_attr)); + } + + return ret; +} + +/** + * ufshcd_config_pwr_mode - configure a new power mode + * @hba: per-adapter instance + * @desired_pwr_mode: desired power configuration + */ +static int ufshcd_config_pwr_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *desired_pwr_mode) +{ + struct ufs_pa_layer_attr final_params = { 0 }; + int ret; + + if (hba->vops && hba->vops->pwr_change_notify) + hba->vops->pwr_change_notify(hba, + PRE_CHANGE, desired_pwr_mode, &final_params); + else + memcpy(&final_params, desired_pwr_mode, sizeof(final_params)); + + ret = ufshcd_change_power_mode(hba, &final_params); return ret; } @@ -3757,7 +3846,16 @@ static int ufshcd_probe_hba(struct ufs_hba *hba) hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; hba->wlun_dev_clr_ua = true; - ufshcd_config_max_pwr_mode(hba); + if (ufshcd_get_max_pwr_mode(hba)) { + dev_err(hba->dev, + "%s: Failed getting max supported power mode\n", + __func__); + } else { + ret = ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info); + if (ret) + dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n", + __func__, ret); + } /* * If we are in error handling context or in power management callbacks @@ -4920,6 +5018,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) host->unique_id = host->host_no; host->max_cmd_len = MAX_CDB_SIZE; + hba->max_pwr_info.is_valid = false; + /* Initailize wait queue for task management */ init_waitqueue_head(&hba->tm_wq); init_waitqueue_head(&hba->tm_tag_wq); |