diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 76 |
1 files changed, 67 insertions, 9 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c4dfcc91ddda..60f582727185 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -3,11 +3,13 @@ menu "SCSI device support" config RAID_ATTRS tristate "RAID Transport Class" default n + depends on BLOCK ---help--- Provides RAID config SCSI tristate "SCSI device support" + depends on BLOCK ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know @@ -27,6 +29,13 @@ config SCSI However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. +config SCSI_TGT + tristate "SCSI target support" + depends on SCSI && EXPERIMENTAL + ---help--- + If you want to use SCSI target mode drivers enable this option. + If you choose M, the module will be called scsi_tgt. + config SCSI_NETLINK bool default n @@ -38,10 +47,10 @@ config SCSI_PROC_FS default y ---help--- This option enables support for the various files in - /proc/scsi. In Linux 2.6 this has been superceeded by + /proc/scsi. In Linux 2.6 this has been superseded by files in sysfs but many legacy applications rely on this. - If unusure say Y. + If unsure say Y. comment "SCSI support type (disk, tape, CD-ROM)" depends on SCSI @@ -83,7 +92,7 @@ config CHR_DEV_OSST tristate "SCSI OnStream SC-x0 tape support" depends on SCSI ---help--- - The OnStream SC-x0 SCSI tape drives can not be driven by the + The OnStream SC-x0 SCSI tape drives cannot be driven by the standard st driver, but instead need this special osst driver and use the /dev/osstX char device nodes (major 206). Via usb-storage and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives @@ -214,6 +223,23 @@ config SCSI_LOGGING there should be no noticeable performance impact as long as you have logging turned off. +config SCSI_SCAN_ASYNC + bool "Asynchronous SCSI scanning" + depends on SCSI + help + The SCSI subsystem can probe for devices while the rest of the + system continues booting, and even probe devices on different + busses in parallel, leading to a significant speed-up. + If you have built SCSI as modules, enabling this option can + be a problem as the devices may not have been found by the + time your system expects them to have been. You can load the + scsi_wait_scan module to ensure that all scans have completed. + If you build your SCSI drivers into the kernel, then everything + will work fine if you say Y here. + + You can override this choice by specifying scsi_mod.scan="sync" + or "async" on the kernel's command line. + menu "SCSI Transports" depends on SCSI @@ -795,6 +821,20 @@ config SCSI_IBMVSCSI To compile this driver as a module, choose M here: the module will be called ibmvscsic. +config SCSI_IBMVSCSIS + tristate "IBM Virtual SCSI Server support" + depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP + help + This is the SRP target driver for IBM pSeries virtual environments. + + The userspace component needed to initialize the driver and + documentation can be found: + + http://stgt.berlios.de/ + + To compile this driver as a module, choose M here: the + module will be called ibmvstgt. + config SCSI_INITIO tristate "Initio 9100U(W) support" depends on PCI && SCSI @@ -942,8 +982,13 @@ config SCSI_STEX tristate "Promise SuperTrak EX Series support" depends on PCI && SCSI ---help--- - This driver supports Promise SuperTrak EX8350/8300/16350/16300 - Storage controllers. + This driver supports Promise SuperTrak EX series storage controllers. + + Promise provides Linux RAID configuration utility for these + controllers. Please visit <http://www.promise.com> to download. + + To compile this driver as a module, choose M here: the + module will be called stex. config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" @@ -1014,7 +1059,7 @@ config SCSI_SYM53C8XX_MMIO config SCSI_IPR tristate "IBM Power Linux RAID adapter support" - depends on PCI && SCSI + depends on PCI && SCSI && ATA select FW_LOADER ---help--- This driver supports the IBM Power Linux family RAID adapters. @@ -1024,6 +1069,7 @@ config SCSI_IPR config SCSI_IPR_TRACE bool "enable driver internal trace" depends on SCSI_IPR + default y help If you say Y here, the driver will trace all commands issued to the adapter. Performance impact is minimal. Trace can be @@ -1032,6 +1078,7 @@ config SCSI_IPR_TRACE config SCSI_IPR_DUMP bool "enable adapter dump support" depends on SCSI_IPR + default y help If you say Y here, the driver will support adapter crash dump. If you enable this support, the iprdump daemon can be used @@ -1244,6 +1291,7 @@ config SCSI_QLOGICPTI module will be called qlogicpti. source "drivers/scsi/qla2xxx/Kconfig" +source "drivers/scsi/qla4xxx/Kconfig" config SCSI_LPFC tristate "Emulex LightPulse Fibre Channel Support" @@ -1260,8 +1308,8 @@ config SCSI_SEAGATE These are 8-bit SCSI controllers; the ST-01 is also supported by this driver. It is explained in section 3.9 of the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>. If it - doesn't work out of the box, you may have to change some settings in - <file:drivers/scsi/seagate.h>. + doesn't work out of the box, you may have to change some macros at + compiletime, which are described in <file:drivers/scsi/seagate.c>. To compile this driver as a module, choose M here: the module will be called seagate. @@ -1689,7 +1737,7 @@ config SCSI_NCR53C7xx_FAST config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" - depends on SUN3 && SCSI && BROKEN + depends on SUN3 && SCSI select SCSI_SPI_ATTRS help This option will enable support for the OBIO (onboard io) NCR5380 @@ -1731,6 +1779,16 @@ config ZFCP called zfcp. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. +config SCSI_SRP + tristate "SCSI RDMA Protocol helper library" + depends on SCSI && PCI + select SCSI_TGT + help + If you wish to use SRP target drivers, say Y. + + To compile this driver as a module, choose M here: the + module will be called libsrp. + endmenu source "drivers/scsi/pcmcia/Kconfig" |