summaryrefslogtreecommitdiff
path: root/drivers/sbus
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/sbus')
-rw-r--r--drivers/sbus/sbus.c143
1 files changed, 19 insertions, 124 deletions
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index 5d30a3ebfccd..6e9b2608202b 100644
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -1,7 +1,6 @@
-/* $Id: sbus.c,v 1.100 2002/01/24 15:36:24 davem Exp $
- * sbus.c: SBus support routines.
+/* sbus.c: SBus support routines.
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 2006 David S. Miller (davem@davemloft.net)
*/
#include <linux/kernel.h>
@@ -17,29 +16,12 @@
#include <asm/bpp.h>
#include <asm/irq.h>
-struct sbus_bus *sbus_root = NULL;
-
-static struct linux_prom_irqs irqs[PROMINTR_MAX] __initdata = { { 0 } };
-#ifdef CONFIG_SPARC32
-static int interrupts[PROMINTR_MAX] __initdata = { 0 };
-#endif
+struct sbus_bus *sbus_root;
#ifdef CONFIG_PCI
extern int pcic_present(void);
#endif
-/* Perhaps when I figure out more about the iommu we'll put a
- * device registration routine here that probe_sbus() calls to
- * setup the iommu for each Sbus.
- */
-
-/* We call this for each SBus device, and fill the structure based
- * upon the prom device tree. We return the start of memory after
- * the things we have allocated.
- */
-
-/* #define DEBUG_FILL */
-
static void __init fill_sbus_device(int prom_node, struct sbus_dev *sdev)
{
unsigned long address, base;
@@ -52,117 +34,30 @@ static void __init fill_sbus_device(int prom_node, struct sbus_dev *sdev)
len = prom_getproperty(prom_node, "reg",
(char *) sdev->reg_addrs,
sizeof(sdev->reg_addrs));
- if (len == -1) {
- sdev->num_registers = 0;
- goto no_regs;
- }
-
- if (len % sizeof(struct linux_prom_registers)) {
- prom_printf("fill_sbus_device: proplen for regs of %s "
- " was %d, need multiple of %d\n",
- sdev->prom_name, len,
- (int) sizeof(struct linux_prom_registers));
- prom_halt();
- }
- if (len > (sizeof(struct linux_prom_registers) * PROMREG_MAX)) {
- prom_printf("fill_sbus_device: Too many register properties "
- "for device %s, len=%d\n",
- sdev->prom_name, len);
- prom_halt();
- }
- sdev->num_registers = len / sizeof(struct linux_prom_registers);
- sdev->ranges_applied = 0;
+ sdev->num_registers = 0;
+ if (len != -1) {
+ sdev->num_registers =
+ len / sizeof(struct linux_prom_registers);
+ sdev->ranges_applied = 0;
- base = (unsigned long) sdev->reg_addrs[0].phys_addr;
+ base = (unsigned long) sdev->reg_addrs[0].phys_addr;
- /* Compute the slot number. */
- if (base >= SUN_SBUS_BVADDR && sparc_cpu_model == sun4m) {
- sdev->slot = sbus_dev_slot(base);
- } else {
- sdev->slot = sdev->reg_addrs[0].which_io;
+ /* Compute the slot number. */
+ if (base >= SUN_SBUS_BVADDR && sparc_cpu_model == sun4m)
+ sdev->slot = sbus_dev_slot(base);
+ else
+ sdev->slot = sdev->reg_addrs[0].which_io;
}
-no_regs:
len = prom_getproperty(prom_node, "ranges",
(char *)sdev->device_ranges,
sizeof(sdev->device_ranges));
- if (len == -1) {
- sdev->num_device_ranges = 0;
- goto no_ranges;
- }
- if (len % sizeof(struct linux_prom_ranges)) {
- prom_printf("fill_sbus_device: proplen for ranges of %s "
- " was %d, need multiple of %d\n",
- sdev->prom_name, len,
- (int) sizeof(struct linux_prom_ranges));
- prom_halt();
- }
- if (len > (sizeof(struct linux_prom_ranges) * PROMREG_MAX)) {
- prom_printf("fill_sbus_device: Too many range properties "
- "for device %s, len=%d\n",
- sdev->prom_name, len);
- prom_halt();
- }
- sdev->num_device_ranges =
- len / sizeof(struct linux_prom_ranges);
+ sdev->num_device_ranges = 0;
+ if (len != -1)
+ sdev->num_device_ranges =
+ len / sizeof(struct linux_prom_ranges);
-no_ranges:
- /* XXX Unfortunately, IRQ issues are very arch specific.
- * XXX Pull this crud out into an arch specific area
- * XXX at some point. -DaveM
- */
-#ifdef CONFIG_SPARC64
- len = prom_getproperty(prom_node, "interrupts",
- (char *) irqs, sizeof(irqs));
- if (len == -1 || len == 0) {
- sdev->irqs[0] = 0;
- sdev->num_irqs = 0;
- } else {
- unsigned int pri = irqs[0].pri;
-
- sdev->num_irqs = 1;
- if (pri < 0x20)
- pri += sdev->slot * 8;
-
- sdev->irqs[0] = sbus_build_irq(sdev->bus, pri);
- }
-#endif /* CONFIG_SPARC64 */
-
-#ifdef CONFIG_SPARC32
- len = prom_getproperty(prom_node, "intr",
- (char *)irqs, sizeof(irqs));
- if (len != -1) {
- sdev->num_irqs = len / 8;
- if (sdev->num_irqs == 0) {
- sdev->irqs[0] = 0;
- } else if (sparc_cpu_model == sun4d) {
- extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq);
-
- for (len = 0; len < sdev->num_irqs; len++)
- sdev->irqs[len] = sun4d_build_irq(sdev, irqs[len].pri);
- } else {
- for (len = 0; len < sdev->num_irqs; len++)
- sdev->irqs[len] = irqs[len].pri;
- }
- } else {
- /* No "intr" node found-- check for "interrupts" node.
- * This node contains SBus interrupt levels, not IPLs
- * as in "intr", and no vector values. We convert
- * SBus interrupt levels to PILs (platform specific).
- */
- len = prom_getproperty(prom_node, "interrupts",
- (char *)interrupts, sizeof(interrupts));
- if (len == -1) {
- sdev->irqs[0] = 0;
- sdev->num_irqs = 0;
- } else {
- sdev->num_irqs = len / sizeof(int);
- for (len = 0; len < sdev->num_irqs; len++) {
- sdev->irqs[len] = sbint_to_irq(sdev, interrupts[len]);
- }
- }
- }
-#endif /* CONFIG_SPARC32 */
+ sbus_fill_device_irq(sdev);
}
/* This routine gets called from whoever needs the sbus first, to scan